در این تحقیق با استفاده از ذرات کاهگندم و برنج، ذرات نانورس، پلیپروپیلن و جفتکننده، چوب – پلاستیک ساخته شد و خواص فیزیکی و مکانیکی آن مورد ارزیابی قرار گرفت. مقدار مصرف ماده زمینه پلاستیکی(پلیپروپیلن) 60 درصد وزنی و ماده لیگنوسلولزی 40 درصد وزنی در نظر گرفته شد. میزان نانورس اضافه شده در سه سطح 0، 2 و 4 درصد و میزان ماده جفتکننده، 2 درصد وزنی در تمام تیمارها بهجز تیمار شاهد در نظر گرفته شد. نمونههای تیمار شاهد بدون اضافه کردن جفتکننده و ذرات نانورس و تنها با استفاده از پلیپروپیلن و ماده لیگنوسلولزی ساخته شدند. مدولهای کششی و خمشی با افزایش 2 درصد نانورس افزایش یافته ولی در سطح 4 درصد شاهد کاهش مدولها و با افزایش نانورس مقاومت به ضربه کاهش یافتند. خواص جذب آب 24 ساعتی نمونههای ساخته شده نیز با اضافه کردن 2 درصد نانورس کاهش یافته و در سطح 4 درصد نانورس افزایش قابل توجهی مشاهده شد. البّته در تمام تیمارها، نمونههای ساخته شده از کاهبرنج به دلیل وجود سیلیس بیشتر و سازگاری بیشتر با ذرات نانورس، ویژگیهای فیزیکی و مکانیکی مطلوبتری نسبت به نمونههای تولید شده از کاهگندم داشتند. بهمنظور بررسی دقیقتر نتایج از میکروسکوپ الکترونی پویشی استفاده شد.
Physical and mechanical properties wood-plastic composites produced from wheat and rice straw particles, nano-clay, polypropylene and MAPP were investigated. The amount of polypropylene and lignocellulosic materials were selected as 60 wt% and 40 wt% respectively. The Nano-clay was added in three levels 0, 2 and 4 wt% and the amount of coupling agent was fixed and set to 2 wt% for all treatments except for the control. The control samples were made from polypropylene and lignocellulosic materials with neither nanoclay nor coupling agent was used. The results showed that the tensile and flexural strengths were decreased by the addition of nanoparticles. For tensile and flexural modulus, adding 2 wt% of nanoclay led to an increase in both moduli. However there was a decrease in both moduli when 4 wt% nanoclay was added. The impact strength decreased adding nanoclay. There was a decrease in 24 hour water absorption when 2 wt% of nanoclay was added but an increase was observed in 4 wt% of nanoclay level. According to the mechanical and physical properties of all the treatments, the samples made of rice straw showed better results compare to wheat straw samples due to their high amount of silica and its compatibility with nanoclay. SEM test was performed.