@article { author = {ُSafdari, Vahid reza and Eskini, Nima and Tajedini, Aghang and Bayramzadeh, Valima}, title = {The effect of erosion on anatomical characteristics of root and bark of Juniperus excelsa}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {4}, pages = {529-583}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2012.2785}, abstract = {Abstract: Wood anatomy in addition to genetic is affected by environmental factors. One of the environmental factors is soil erosion which affects anatomical properties of roots considerably. Juniperus excelsa is one of Iranin indigenous softwood and has longevity and anatomical properties of its root in two conditions: inside of soil and exposed one can reveal effects of soil erosion on wood anatomical properties of root. So many roots and barks of trees in inside of soils and exposed have been sampled and many micro-sections prepared by microtome and anatomical properties were investigated. Results showed that wood roots under soil conform of one row of late-wood and by exposing the lumen area of tracheids in early-wood and late-wood were decreased and the cells appear thicker and late-wood portion increased. The axial parenchyma inclusion of dark resins in exposed roots observed frequently. Meanwhile by exposing of roots the thickness of bark decreased and the thickness of phloem and periderm in exposed root is not as wide as normal roots.}, keywords = {Root wood anatomy,Juniperus excelsa,Bark anatomy,soil erosion,Exposed root}, title_fa = {اثر فرسایش خاک بر روی ویژگی‌های آناتومیکی چوب و پوست ریشه درخت ارس (Juniperus excelsa)}, abstract_fa = {چکیده: آناتومی چوب درختان علاوه بر تاثیر­پذیری از صفات والدین (ژن) متأثر از عوامل محیطی است. یکی از این عوامل محیطی فرسایش خاک است که تأثیرهای قابل توجهی بر روی ویژگی­های آناتومی چوب ریشه درختان دارد. درخت ارس (Juniperus excelsa) یکی از سوزنی­برگان بومی ایران و دارای دیرزیستی بالا بوده و در نتیجه مطالعه آناتومی چوب ریشه آن در دو حالت داخل و خارج از خاک می­تواند بیانگر اثرات فرسایش خاک بر روی ویژگی­های آناتومیکی چوب ریشه این گونه باشد.  بدین منظور از پوست و چوب ریشه­های چند درخت گونه ارس در داخل خاک و بیرون­زده از خاک نمونه­برداری و از آنها توسط میکروتوم مقاطع نازک میکروسکوپی تهیه و صفت‌های آناتومیکی آنها مطالعه و مقایسه شد. نتایج نشان داد که حلقه­های رویشی نمونه چوب ریشه داخل خاک از یک ردیف چوب تابستانه تشکیل شده است و با شروع پدیده بیرون­زدگی از خاک در مقطع عرضی از ضخامت حفرات سلولی در بخش بهاره و تابستانه کاسته شده و سلول­های چوبی در ظاهر ضخیم­تر به­نظر می­رسد و همچین بر مقدار چوب تابستانه افزوده می­شود. پارانشیم­های طولی حاوی مواد رنگی سیاه رنگ در بخش بیرون­زده چوب ریشه به­فراوانی مشاهده می­شود. ضمناً با شروع پدیده بیرون­زدگی از ضخامت پوست بخش بیرون­زده از خاک کاسته شده و ضخامت لایه آبکش و پریدرم آن به بزرگی ریشه داخل خاک نمی­باشد.}, keywords_fa = {آناتومی چوب ریشه,ارس (excelsa Juniperus),آناتومی پوست,فرسایش خاک,بیرون‌زدگی ریشه}, url = {https://ijwpr.areeo.ac.ir/article_2785.html}, eprint = {https://ijwpr.areeo.ac.ir/article_2785_3d9c8cdce154bfa1f268a9871ce8f448.pdf} } @article { author = {Frozan, Zinab and Taremian, Asghar and Gerar, Janin}, title = {Possibility of using non-destructive spectrophotometery to detect the poplar tension wood and spruce compression wood in freshly cut and dried timbers}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {4}, pages = {568-753}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2012.109599}, abstract = {In this study, the potential use of spectrophotometery and CIELAB technique was evaluated to detect reaction woods, including poplar tension wood and spruce compression wood. Thus, two trees of spruce ( Picea abies) and poplar (Populous nigra) containing reaction wood were cut from  a forest belonging to ENGREF (the National Engineering School of Forestry close to Nancy in France). Then, the parameters of lightness (L*) and reflectance (R) were measured in the reaction and normal wood regions in the green and dry conditions.  The results showed that in the green condition, the spruce compression wood had less lightness than the normal wood and the lightness of compression wood increased as a result of drying. Difference between the lightness and reflectance parameters of two types of reaction woods and those of their corresponding normal woods was significant in the green condition. Consequently, it can be concluded that the macroscopically detection of reaction wood is easier in the green condition than in the dry one. }, keywords = {Nondestructive test,spectrophotometery,reaction wood,tension wood,compression wood}, title_fa = {بررسی امکان استفاده از آزمون غِیرمخرب اسپکتروفتومتری برای شناسایی چوب کششی صنوبر و چوب فشاری نوئل در چوب آلات تازه بریده شده و خشک شده}, abstract_fa = {در این تحقیق امکان استفاده از آزمون غیرمخرب اسپکتروفتومتری و تکنیک ((CIELAB برای شناسایی چوب­های­واکنشی شامل چوب کششی صنوبر و چوب­فشاری نوئل مورد بررسی قرار گرفت. برای این منظور، دو اصله درخت از گونه­های نوئل ((Picea abies و صنوبر (Populous nigra) حاوی چوب­واکنشی از جنگل آموزشی و پژوهشی موسسه تحقیقاتی آنگرف در نانسی فرانسه استحصال شدند. سپس، با استفاده از دستگاه اسپکتروفتومتر مدل Miniscan EZ پارامترهای روشنی (L*) و انعکاس‌نور R% f(λ) در دو ناحیه چوب­واکنشی و چوب نرمال در دو دامنه رطوبتی­سبز و خشک (رطوبت 12%) اندازه­گیری شده­است. نتایج نشان دادند که در رطوبت­سبز، چوب­فشاری نوئل از روشنی کم­تری در مقایسه با چوب­نرمال آن برخوردار است و در اثر خشک­شدن بر روشنی چوب­فشاری افزوده می­شود. بر خلاف چوب­فشاری، چوب­کششی صنوبر در رطوبت­سبز از روشنی بیشتری در مقایسه با چوب­نرمال آن برخوردار بود و در اثر خشک­شدن بر روشنی آن نیز افزوده شد. تفاوت بین پارامترهای روشنی و انعکاس نور هردو نوع چوب­واکنشی در مقایسه با چوب نرمال آنها در رطوبت­سبز بیشتر بود و بنابراین می­توان نتیجه­گیری کرد که شناسایی ماکروسکوپی چوب­های­واکنشی در شرایط رطوبت­سبز آسان­تر از شرایط خشک است.}, keywords_fa = {آزمون غیرمخرب,اسپکتروفتومتری,چوب واکنشی,چوب کششی,چوب فشاری}, url = {https://ijwpr.areeo.ac.ir/article_109599.html}, eprint = {https://ijwpr.areeo.ac.ir/article_109599_8717b8f0c01c0f14fc980b93a8ce151f.pdf} } @article { author = {ُSafdari, Vahid reza and Eskini, Nima and Tajdini, Ajang and Bayramzadeh, Vlima}, title = {Effect of nanoclay on mechanical properties of HDPE/wheat straw composite}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {4}, pages = {595-605}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2022.109618}, abstract = {Wood anatomy in addition to genetic is affected by environmental factors. One of the environmental factors is soil erosion which affects anatomical properties of roots considerably. Juniperus excelsa is one of Iranin indigenous softwood and has longevity and anatomical properties of its root in two conditions: inside of soil and exposed one can reveal effects of soil erosion on wood anatomical properties of root. So many roots and barks of trees in inside of soils and exposed have been sampled and many micro-sections prepared by microtome and anatomical properties were investigated. Results showed that wood roots under soil conform of one row of late-wood and by exposing the lumen area of tracheids in early-wood and late-wood were decreased and the cells appear thicker and late-wood portion increased. The axial parenchyma inclusion of dark resins in exposed roots observed frequently. Meanwhile by exposing of roots the thickness of bark decreased and the thickness of phloem and periderm in exposed root is not as wide as normal roots.}, keywords = {Nonoclay,WHEAT STRAW,Composite,Flexural strength,tensile strength,impact strength}, title_fa = {اثر نانوذرات رس برخواص مکانیکی چندسازه کاه گندم/ پلی اتیلن سنگین}, abstract_fa = {آناتومی چوب درختان علاوه بر تاثیر­پذیری از صفات والدین (ژن) متأثر از عوامل محیطی است. یکی از این عوامل محیطی فرسایش خاک است که تأثیرهای قابل توجهی بر روی ویژگی­های آناتومی چوب ریشه درختان دارد. درخت ارس (Juniperus excelsa) یکی از سوزنی­برگان بومی ایران و دارای دیرزیستی بالا بوده و در نتیجه مطالعه آناتومی چوب ریشه آن در دو حالت داخل و خارج از خاک می­تواند بیانگر اثرات فرسایش خاک بر روی ویژگی­های آناتومیکی چوب ریشه این گونه باشد.  بدین منظور از پوست و چوب ریشه­های چند درخت گونه ارس در داخل خاک و بیرون­زده از خاک نمونه­برداری و از آنها توسط میکروتوم مقاطع نازک میکروسکوپی تهیه و صفت‌های آناتومیکی آنها مطالعه و مقایسه شد. نتایج نشان داد که حلقه­های رویشی نمونه چوب ریشه داخل خاک از یک ردیف چوب تابستانه تشکیل شده است و با شروع پدیده بیرون­زدگی از خاک در مقطع عرضی از ضخامت حفرات سلولی در بخش بهاره و تابستانه کاسته شده و سلول­های چوبی در ظاهر ضخیم­تر به­نظر می­رسد و همچین بر مقدار چوب تابستانه افزوده می­شود. پارانشیم­های طولی حاوی مواد رنگی سیاه رنگ در بخش بیرون­زده چوب ریشه به­فراوانی مشاهده می­شود. ضمناً با شروع پدیده بیرون­زدگی از ضخامت پوست بخش بیرون­زده از خاک کاسته شده و ضخامت لایه آبکش و پریدرم آن به بزرگی ریشه داخل خاک نمی ­باشد.}, keywords_fa = {نانو ذرات رس,کاه گندم,فرآورده مرکب,مقاومت خمشی,مقاومت کششی,مقاومت به ضربه}, url = {https://ijwpr.areeo.ac.ir/article_109618.html}, eprint = {https://ijwpr.areeo.ac.ir/article_109618_84b82996097f8ad130d4b2be8c83af67.pdf} } @article { author = {Mohebi, Roholah and Tajedini, Aghang and Jahan-Latibari, Ahmad and Nourbakhsh, Amir}, title = {The Influence of Silica Content on Mechanical Properties of Polypropylene/Wood Powder/Silica Composite}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {4}, pages = {595-605}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2012.109620}, abstract = {The influence of different contents (0, 5 and 10% W/W)of silica and poplar wood powder ( 30 ,40 and 50% W/W of total weight of composite) on strength properties of Polypropylene/Wood powder/Silica composite was evaluated. Various components of composite was melt mixed using two screw counter retating extruder, followed by cooling and granulizing. Composite granules were injected into test samples. The results of strength properties measurements revealed that almost all strength values were improved. At higher content of silica, The MOR increased from 47.9 to 53.3 MPa, MOE  from 2625 to 4517 MPa and MOE in tensile increased from initial value of 4525MPa (without silica) to 6884MPa (10% silica in composite). Marginal increase in tensile strength and Izod Impact strength was observed, but the hardness of the composite was improved from 66 to73.77 shoreD. At higher silica content, the density of the composite was higher, as expected.}, keywords = {Composite,poplar wood,Polypropylene,Silica,Strengths}, title_fa = {بررسی اثر سیلیس بر ویژگی‌های مکانیکی چندسازه پلی‌پروپیلن/ پودرچوب‌/ سیلیس}, abstract_fa = {در این تحقیق اثر افزودن مقادیر متفاوت سیلیس ( 0، 5 و 10 درصد وزن چندسازه) و پودرچوب‌صنوبر در سه سطح با30%، 40%و 50% وزن چند‌سازه برروی ویژگی‌های مکانیکی چندسازه‌های حاصل از پودرچوب‌صنوبر و پلی‌پروپیلن مورد بررسی قرار گرفت. اختلاط مواد در مخلوط‌کن (توام‌کننده) انجام گرفت و بعد از آن، از دستگاه تزریق برای ساخت نمونه‌های آزمونی استفاده گردید. نتایج اندازه‌گیری ویژگی‌های مقاومتی چندسازه نشان دادند که با افزایش سیلیس، ویژگی‌های‌ مقاومتی افزایش یافت. در اثر زیاد شدن مقدار سیلیس، مقاومت‌خمشی از مقدار  MPa 9/47 به MPa‌ 3/53 (مقدار افزایش 2/12%)، مدول‌خمشی از مقدار  MPa2625 به MPa ‌4517 (72%) و مدول‌کششی از مقدار MPa 4525 به MPa ‌6884 (52%) افزایش یافت. افزایش مقاومت ‌به ‌ضربه چشمگیر نبود ولی سختی نمونه‌ها از ShoreD 66 به ShoreD 77/73‌ (11/11%)افزایش یافت. در اثر افزودن سیلیس دانسیته چندسازه افزایش یافته است.}, keywords_fa = {چندسازه,پودرچوب‌صنوبر,پلی‌پروپیلن,سیلیس,مقاومت‌مکانیکی}, url = {https://ijwpr.areeo.ac.ir/article_109620.html}, eprint = {https://ijwpr.areeo.ac.ir/article_109620_d3d8cb4c2eea63e727ea3b50852ae36c.pdf} } @article { author = {Ghofrani, Mohammad and Nori, Habib and Rangavar, Hossein}, title = {study on the cut load test, siding strength of two ready-to-assemble corner joints and comparing them with fixed joints}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {4}, pages = {619-634}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2012.109621}, abstract = {    In this study we have paid to mechanical strength measurement of redy to assemble joints (RTA). Including metallic angular joint and elite and compere them with fixed joints including wooden dowel twist and biscuit joint in two cut load test, siding, in some fiber board factor with medium density fiber board(MDF ).According to ASTMD1761 standard testing cases with L-from from two pice of MDF with 20cm*20cm dimensions that  are mad in L-form and the repetition that have been taken in cansidration for any maintance is 5 sample.The number of 80 sample that are studied in this field are as follow: fixed joint including wooden dowel joint, granulated with drops of 8mm and 10mm covering by Adhesive PVAc, twist joint with 40mm and 50mm length , wooden Biscuitt joint number 10 coverd with( mixed with )PVAc adhesive and ready to assemble joint including Elite joint reinforcement with dowel with 8mm and 10mm diameter, metallic ready to assemble joint with pin and withont pin, reinforcing with dowel to 8mm and 10mm diameter.In fixed joint for studing the coated effect, we have used plates of MDF with coated and without coated (uncoated). The result of study showed ready to assemble joints with pin is more than ready to assemble angular joints without pin, also ready to assemble joints strength of Elite joints with dowel 10mm is more than fixed joint strength of 8mm dowel. fixed joint strength of 5mm twist with MDF uncoated in both tests in more than strength of uncoated 4cm twist. more upper rang of  strength 4cm twist. more upper rang of strength in ready to assemble joints are specified in cut load test siding regular  spinous and 10mm dowel. In fixed joints there is more strength in 10mm dowel joints. for ready to assemble joints, pin reciprocal effect and dowel diameter is 87 and 30/8 respectfuly.Acocording to obtained resalts between more better care of two group are intraduced in spinous ready to assemble joints with 8mm dowel (191.61 N ) and l0mm dowel joints (135.14N).}, keywords = {ready to assemble joints,fixed joints,joints strength in cutting load equal,Medium density fiber board (MDF)}, title_fa = {بررسی مقاومت دو نوع اتصال جداشدنی در برابر بار برشی جانبی و مقایسه آن‌ها با اتصال ثابت}, abstract_fa = {در این تحقیق به اندازه‌گیری مقاومت مکانیکی اتصال جداشدنی (الیت[1]سه تیکه) در برابر بار برشی جانبی[2]و مقایسه آن‌ها با اتصال‌‌های ثابت، در چندسازه تخته‌فیبر دانسیته متوسط (MDF)[3]، پرداخته شده است.بر اساس استاندارد D1761, ASTM، نمونه‌‌های مورد آزمایش به شکل L، از دو قطعه MDF به ابعاد 20×20 سانتی‌متر با تکرار 5 نمونه ساخته شدند. تعداد هشتاد نمونه مورد بررسی در این مطالعه عبارتند از: اتصال‌‌های ثابت شامل اتصال دوبل چوبی آجدار با قطر‌های 8 و10 میلی‌متر آغشته شده با چسب پلی‌وینیل استات (PVA)، اتصال پیچ با طول‌‌های40 و50 میلی‌متر، اتصال بیسکویت چوبی شماره 10 آغشته شده با چسب پلی‌وینیل استات و اتصال‌‌های جداشدنی شامل اتصال الیت، اتصال الیت تقویت شده با دوبل به قطر‌های 8 و10 میلی‌متر، اتصال جداشدنی فلزی با خار و بدون‌خار  تقویت شده با دوبل بدون چسب به قطر‌های 8 و10 میلی‌متر در اتصال‌‌های ثابت جهت بررسی تأثیر روکش، از صفحه‌‌های MDF با روکش و بدون روکش استفاده گردید. نتیجه مطالعه نشان داد مقاومت اتصال گوش‌های جداشدنی خاردار بیشتر از اتصال گوش‌های جداشدنی بدون‌خار می‌باشد، همچنین مقاومت اتصال گوش‌های جداشدنی اتصال الیت با دوبل 10 میلی‌متر بیشتر از اتصال الیت با دوبل8 میلی‌متر و اتصال الیت بدون دوبل می‌باشد. مقاومت اتصال ثابت دوبل بدون چسب 10 میلی‌متر بیشتر از مقاومت اتصال ثابت دوبل 8  میلی‌متر می‌باشد. مقاومت اتصال ثابت پیچ 5 سانتی‌متر بدون روکش بیشتر از مقاومت پیچ 4 سانتی‌متر بدون روکش می‌باشد. بالاترین مقاومت در اتصال‌‌های جداشدنی در اتصال گوش‌های خاردار با دوبل10 میلی‌متر تشخیص داده شد. در اتصال‌‌های ثابت اتصال دوبل10 میلی‌متر دارای بالاترین مقاومت است. براساس نتایج بدست آمده تیمار‌های برتر، اتصال جداشدنی خاردار با دوبل8 میلی‌متر (61/191 نیوتن) و اتصال ثابت دوبل 10 میلی‌متر (14/135 نیوتن) می‌باشند. 1- اتصال سه تیکه گوشه ای در انواع کابینت، قفسه کتاب و... استفاده می شود و برای تعداد نامحدودی مرتبه قابل باز و مونتاژ مجدد است 2- Lateral shear strength 3- Medium density fiberboard}, keywords_fa = {اتصال جداشدنی,اتصال ثابت,مقاومت اتصال در برابر بار برشی,‌تخته فیبر دانسیته متوسط (MDF)}, url = {https://ijwpr.areeo.ac.ir/article_109621.html}, eprint = {https://ijwpr.areeo.ac.ir/article_109621_4b31dc298aa7a50309873163b99b1eb2.pdf} } @article { author = {Modirrahmati, Sina and Jahan-Latibari, Ahmad and Minaei, Mansor}, title = {The Influence of Nanoclay on the Performance of HDPE/ Wheat Straw Powder Composite Produced by Two Stage Mixing Process}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {4}, pages = {635-645}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2012.109622}, abstract = {The influence of nanoclay addition on the strength properties of HDPE/ Wheat straw powder Composite was investigated. Composites compounds were produced using 73%HDPE, 25% wheat straw powder and 2% MAPE and three amounts of nanoclay (1, 2, and 3% of composite compound). First, HDPE and nanoclay was melt- mixed and after cooling, the extrudate was milled to fine granules. This granules were then melt compounded with pre-weighted amount of wheat straw powder and MAPE followed by injection moulding to produce test specimens. The flexural, tensile and impact strength were measured. The results showed that the addition of nanoclay to the composite improved flexural strength and modulus, tensile strength and modulus. However the notched Izod strength was reduced. }, keywords = {Nanoclay,Composite,Flexural strength,tensile strength,wheat straw powder}, title_fa = {تأثیر نانورس بر عملکرد چندسازه پلی‌اتیلن سنگین/ پودر کاه‌گندم تولید شده با فرآیند ذوب دو مرحله‌ای}, abstract_fa = {تأثیر افزودن نانورس بر ویژگی‌های مقاومتی چندسازه پلی‌اتیلن سنگین/ کاه‌گندم بررسی شده است. از ترکیب 73% پلی‌اتیلن سنگین، 25% کاه‌گندم و 2% پلی‌اتیلن مالئیک‌دار شده و افزودن مقادیر 1، 2 و 3% نانورس به این ترکیب، چندسازه ساخته شده است. ابتدا پلی‌اتیلن سنگین و نانورس به شکل مذاب با یکدیگر مخلوط شده و سپس این ترکیب پس از سرد و تبدیل به گرانول شدن، همراه با پودر کاه‌گندم و MAPE مجدداً به صورت مذاب مخلوط شده و نمونه‌های آزمونی از آن قالب‌گیری شده‌اند. آزمون‌های مکانیکی شامل ویژگی‌های مقاومت کشش، خمش و ضربه فاقدار بر روی نمونه‌ها انجام گرفت. نتایج نشان داد که در اثر افزودن نانورس به ترکیب چندسازه، مقاومت‌خمشی، مقاومت‌کششی، مدول‌الاستیسیته خمشی و مدول‌الاستیسیته کششی افزایش یافته است. ولی مقاومت به ضربه فاقدار چندسازه با افزودن نانورس کاهش یافته است. }, keywords_fa = {نانورس,چندسازه,مقاومت‌خمشی,مقاومت‌کششی,پودر کاه‌گندم}, url = {https://ijwpr.areeo.ac.ir/article_109622.html}, eprint = {https://ijwpr.areeo.ac.ir/article_109622_3f539fda7d06466c61320cd56f276340.pdf} } @article { author = {Dosthosseini, Kazem and ghafari, robab}, title = {Study on the effect of urea addition to urea-formaldehyde adhesive on physical and mechanical properties of poplar particleboard}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {4}, pages = {649-654}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2012.109623}, abstract = {In this research, the effect of increasing content of urea to urea-formaldehyde adhesive on physical and mechanical properties of  poplar wood particleboard was investigated. The content of urea added to the adhesive four levels (zero, 4.1, 8.2 and 16 % based on the solid content of adhesive) and two press temperatures of 170 and 180° C as the variable factors were selected. Boards with density of 0.63 gr/cm3 and 10% of the adhesive dosage were made. Mechanical properties including modulus of rupture (MOR), internal bond (IB) and physical properties including water absorption and thickness swelling were measured. Results showed that urea addition to urea formaldehyde adhesive improved the mechanical strengths of the board especially internal bonding reduced the water absorption and thickness swelling. Also, the impact of press temperature on mechanical and physical properties of boards was noticeable and boards produced applying press temperature of 170° C were superior. }, keywords = {Poplar,UREA FORMALDEHYDE,Urea,modulus of rupture (MOR),INTERNAL BONDING (IB),water absorption,Thickness swelling}, title_fa = {بررسی تأثیر افزایش اوره به چسب اوره فرم‌آلدهید بر خواص فیزیکی و مکانیکی تخته خرده‌چوب صنوبر}, abstract_fa = {در این پژوهش، اثر افزایش مقدار اوره به چسب اوره­فرم­آلدهید بر خواص فیزیکی و مکانیکی تخته­خرده‌چوب ساخته شده با این چسب بررسی شد. مقدار اوره‌ی افزوده شده به چسب در چهار سطح صفر، 1/4، 2/8 و 16 درصد (نسبت اوره به ماده­ی خشک چسب) و دمای پرس در دو سطح 170 و 180 درجه‌ی سانتی‌گراد به عنوان عوامل متغیر در نظر گرفته شدند و تأثیر آنها بر خواص کاربردی تخته­خرده­چوب همسان با دانسیته­ی 63/0 گرم بر سانتی­متر مکعب و مقدار چسب مصرفی 10% بررسی شد. خواص مکانیکی شامل مدول‌گسیختگی (MOR)، چسبندگی‌داخلی (IB) و خواص فیزیکی شامل جذب آب و واکشیدگی ضخامت اندازه‌گیری شدند. نتایج نشان دادند که افزایش اوره به چسب اوره­فرم­آلدهید باعث بهبود مقاومت‌های مکانیکی تخته شده و میزان جذب آب و واکشیدگی ضخامت را کاهش می‌دهد. همچنین، بررسی تأثیر دمای پرس حاکی از بهبود خواص مکانیکی و فیزیکی تخته­های آزمونی در دمای 170 درجه‌ی سانتی‌گراد می­باشد. }, keywords_fa = {تخته خرده‌چوب صنوبر,چسب اوره فرم‌آلدهید,اوره,مدول‌گسیختگی,چسبندگی‌داخلی,جذب آب,واکشیدگی ضخامت}, url = {https://ijwpr.areeo.ac.ir/article_109623.html}, eprint = {https://ijwpr.areeo.ac.ir/article_109623_e61820252bbde43d16314fc42a73b012.pdf} } @article { author = {Sepahvand, ُSima and Zahedi, Meysam and vilki, Samaneh and Tabarsa, Taghi}, title = {Construction of Particlboard Using Tannin-Based Phenol Adhesive}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {4}, pages = {655-663}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2012.109624}, abstract = {Tannins are the most desirable natural, renewable phenolic components which obtained from plant resources. The phenolic nature of tannins causes that this materials react with formaldehyde and form tannin-formaldehyde resins. In this study, the raw materials of wheat straw and forest woods were used for producing of particleboard (with a ratio of about 50 to 50 percent) using phenol formaldehyde based on tannin. Tannin as a powder was added at 10 and 20 percent (based on dry weight of resin solution) to formalin 35% for glue making. Particleboards were made at two range of thickness, 10 and 16 mm and their properties of including bending strength, modulus of elasticity, internal bonding, thickness swelling and water absorption were measured. The results from this investigation showed that the strength properties of the made boards from combined wood chips were lower than those from pure wood chips. Also, increasing of tannin usage into phenol formaldehyde caused to increase internal bonding or adhesion, swelling and water absorption (2 and 24 hours) of the boards.}, keywords = {Particleboard,WHEAT STRAW,Tannin-Phenol formaldehyde Resins. Strength Properties}, title_fa = {ساخت تخته خرده‌چوب با استفاده از چسب فنول بر پایه تانن}, abstract_fa = {تانن‌ها یکی از مطلوب‌ترین ترکیب‌های فنولی طبیعی و تجدیدپذیر بوده که از منابع گیاهی به دست می‌آیند. ماهیت فنولی تانن‌ها باعث می‌شود که این مواد در واکنش با فرمالدهید شرکت کرده و رزین‌های تانن فرمالدهید تشکیل دهند. در این تحقیق برای ساخت تخته خرده‌چوب از مواد اولیه کاه‌گندم و خرده‌چوب جنگلی (با نسبت50 به50 درصد) و چسب فنول فرمالدهید بر پایه تانن استفاده شد. برای ساخت چسب، پودر تانن در دو سطح 10و20 درصد بر اساس وزن خشک رزین به محلول فرمالین 35 درصد اضافه شد تخته‌ها در دو محدوده ضخامت  10و16 میلی‌متری ساخته شده و ویژگی‌های آنها شامل مقاومت‌خمشی، مدول‌الاستیسیته، چسبندگی‌داخلی، واکشیدگی‌ضخامتی و جذب آب اندازه‌گیری شدند. نتایج حاصل از این بررسی نشان داد که مقاومت تخته‌های ساخته شده از مخلوط کاه‌گندم و خرده‌چوب نسبت به تخته خرده ساخته شده از خرده‌چوب خالص کمتر است. همچنین افزایش مصرف تانن در چسب فنول فرمالدهید موجب افزایش چسبندگی‌داخلی و افزایش واکشیدگی و میزان جذب آب تخته (در 2 و 24 ساعت) شد. }, keywords_fa = {تخته خرده‌چوب,کاه‌گندم,چسب تانن- فنول فرمالدهید,ویژگی‌های مقاومتی}, url = {https://ijwpr.areeo.ac.ir/article_109624.html}, eprint = {https://ijwpr.areeo.ac.ir/article_109624_34a9e7eb4161f26913b68a21d7738f9d.pdf} } @article { author = {Aryaei monfared, Mohammad hadi and Tavakoli, Hossein and Hosseinkhani, Hossein}, title = {Study of some Apparent, Anatomical and Physical properties of Divdal ҆s (Ammodendron persicum) wood from Zirkooh-Qhaen}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {4}, pages = {664-676}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2012.109625}, abstract = {One of the lesser known local woody species of the Zirkooh-Qhaen in the east of Iran is Ammodendron persicum with the traditional name of Divdal. In this study three selected logs were used for study of wood properties. For the first time wood of this desert species was studied from different physical and anatomical aspects. The results showed that Ammodendron ʼs wood is a ring -porous hardwood that all parts of its cross section have long rays that is visible with naked eye. In the study of physical properties of Ammodendron̛ ҆s wood apparent density and dry one respectively was 1.125 and 0.92 g/Cm3 that put this wood to the very dense category. }, keywords = {physical properties,wood,Ammodendron persicum,Density}, title_fa = {مطالعه برخی ویژگی‌های ظاهری، آناتومیکی و فیزیکی چوب دیودالAmmodendron Persicum منطقه زیرکوه قائن}, abstract_fa = {یکی از گونه­های چوبی کمتر شناخته شده بومی منطقه زیر کوه قائن در شرق ایران، Ammodendron persicum با نام محلی دیودال می‌باشد. در این تحقیق از سه پایه منتخب برای مطالعات ویژگی­های چوب آن استفاده گردید. برای اولین بار چوب این گونه کویری از جنبه­های مختلف فیزیکی و آناتومیکی مورد مطالعه قرار گرفته است. نتایج بررسی­ها نشان داد چوب گونه دیودال جزء پهن‌برگان بخش روزنه­ای می­باشد که سرتاسر مقطع عرضی آن دارای اشعه­های به نسبت بلند می­باشد که با چشم غیر مسلح به خوبی قابل تشخیص است. در بررسی خواص فیزیکی چوب دیودال، دانسیته ظاهری و خشک این چوب به‌ترتیب 125/1 و 92/0 گرم بر سانتی‌متر مکعب تعیین گردید که در طبقه چوب­های بسیار سنگین قرار می­گیرد. همچنین مقدار بالایی خاکستر (2 درصد) در ساختار این چوب اندازه­گیری شد. }, keywords_fa = {ویژگی‌های فیزیکی,چوب,Ammodendron persicum,دانسیته}, url = {https://ijwpr.areeo.ac.ir/article_109625.html}, eprint = {https://ijwpr.areeo.ac.ir/article_109625_31bde0cd9620da7b491cd4bcd5c67293.pdf} } @article { author = {lashgari, amir and Khodayari, Payam and Mohammadi, Seid Ali}, title = {withdrawal strength and bending strangth of L -type of nail′s joint in particleboard and MDF joints.}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {4}, pages = {676-689}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2012.109626}, abstract = {In this research the effect of nail′s length on three different values (32,42,48 mm)the nail  number (2 and 3)and the kind of of  particleboard and MDF on tensile strength and bending moment has been analyzed ,The member dimension of of 10*15*1.6 cm.have been elected for making of L –type joint. The junction have not used out of  any adhesive as an adjuvant. From combination of this variable factors and examination of any strength some 24 samples have created,that due to the 4 iterations,96 specimens of L shaped joints have been coustructed  totally.the bending and tensile strength of produced junction has been measured by mechanical test machine.based on captured results the interaction of constituents of,nail penetration length,nails number and members nature on joint strenght weren′t significant in front of tensile and bending.this research indicated that the junctions with the penetration length of 48 mm,the most amount of nail(three nails)on MDF member elements,have the  greatest strength against bending strength,and the link with penetration length of 42mm alone with the most amount of nail(3 nails)on MDF have the greatest strength against tensile,as copared with each other.}, keywords = {L joints,withdrawal strength,Bending strength,MDF,Particleboard}, title_fa = {بررسی مقاومت‌کششی و خمشی دراتصال L شکل میخ در تخته خرده چوب و تخته‌فیبر با دانسیته متوسط(MDF)}, abstract_fa = {در این مطالعه، تأثیرطول میخ در سه مقدار (42،32 و 48) میلی‌متر، تعداد میخ (2 و 3 عدد) و نوع فرآورده تخته خرده‌چوب و تخته‌فیبر با دانسیته متوسط (MDF) بر مقاومت‌کششی و خمشی بررسی شده است.برای ساخت اتصال L شکل ابعاد عضوها 10×15×6/1 سانتی‌متر بوده است.در این اتصال‌های از هیچ نوع چسبی به‌عنوان ماده کمکی استفاده نشده است. از ترکیب عوامل متغیر فوق در بررسی هر مقاومت 24 نمونه بوجود آمده که با توجه به 4 تکرار جمعاً 96 نمونه اتصالL  شکل ساخته شده و مقاومت‌کششی و خمشی اتصال ایجاد شده توسط ماشین آزمون مکانیکی اندازه‌گیری شد. براساس نتایج به دست آمده  اثر متقابل سه عامل طول نفوذ میخ، تعداد میخ و جنس عضو بر مقاومت اتصال در برابر کشش و خمش معنادار نبوده است. با افزایش طول میخ و تعداد آنها مقاومت‌کششی و خمشی افزایش می‌یابد. در این بررسی اتصال‌های با طول نفوذ 48 میلیمتر، بیشترین تعداد میخ (3 میخ) در جنس عضو تخته‌فیبر با دانسیته متوسط(MDF)  بیشترین مقاومت را در مقاومت‌خمشی واتصال‌های با طول نفوذ 42 میلی‌مترو بیشترین تعداد میخ (3 میخ) در جنس عضو تخته‌فیبر با دانسیته متوسط(MDF)  بیشترین مقاومت را در کشش دارا بودند.}, keywords_fa = {اتصال‌های L شکل چوبی,مقاومت‌خمشی,مقاومت‌کششی,تخته‌فیبر با دانسیته متوسط(MDF),تخته خرده‌چوب}, url = {https://ijwpr.areeo.ac.ir/article_109626.html}, eprint = {https://ijwpr.areeo.ac.ir/article_109626_918de6a5b094b60288c9bc70d9199ab5.pdf} } @article { author = {Jafari, Mostafa}, title = {A new approach to dendroecological studies: Climate change impact on forest’ wood production in Astara (Gilan)}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {4}, pages = {690-706}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2012.109627}, abstract = {This paper presents a new approach to forest wood production and stand productivity through dendroecology and analysis of the annual tree rings of forest broadleaves species. Based on this approach, samples were collected from different heights of the trees and the circumferential growth and wood production under the growth conditions were determined and the impact of probable competition was investigated. The application of tree dendrochronological method is also considered. The results of this study as part of a comprehensive work showed that in the Caspian forest region, this method can be used for such evaluation for more than last five years. A minimum three tree species namely oriental beech (Fagus orientalis Lipsky), oak (Quercus castaneaefolia C. A. Mey.) and hornbeam (Carpinus betulus L.) in three different elevations along the transect line (profile line) from low (400 m), medium (900 m) and high elevation (1250 m) in Astara, Gilan region were selected. Various behaviors of tree species and their responses to climate changes have been recorded in different elevations. }, keywords = {New method approach,dendroecological studies,wood production,beech,Oak,hornbeam}, title_fa = {رهیافت جدید در روش مطالعات گاهشناسی درختی: اثر تغییرات اقلیمی بر تولید چوب منطقه آستارا (گیلان)}, abstract_fa = {این تحقیق رهیافت جدیدی را در کار برد روش گاهشناسی درختی در تولید چوب گونه‌های پهن‌برگ درختان جنگلی ارائه می‌نماید. برمبنای این روش با نمونه‌برداری از درختان در ارتفاعات مختلف و تجزیه و تحلیل میزان رشد دوایر رویشی آنها شرایط رویش و تولید چوب آنها و رقابت‌های احتمالی موجود بین آنها مورد بررسی قرار گرفته است. در بکارگیری این روش کاربرد اکولوژیکی گاهشناسی درختی بیشتر مورد توجه قرار گرفته است. نتایج ارائه شده در این تحقیق بخشی از تحقیقات گسترده‌ای است که در حوزه جنگلهای خزری در خلال بیش از پنج سال گذشته با بکارگیری این روش اجرا شده است. گونه‌های درختی مورد استفاده در این پژوهش شامل راش (Fagus orientalis Lipsky)، بلند‌مازو (.Quercus castaneaefolia C. A. Mey)، و ممرز (Carpinus betulus L.) در حوزه جنگلی آستارا در استان گیلان می‌باشند. ابتدا منطقه جنگلی مورد نظر از طریق جنگل‌گردی و به‌کارگیری نقشه‌های پوشش گیاهی و توپوگرافی، انتخاب گردید. سپس با تعیین خط پروفیل (ترانسکت) پایه‌های درختی در سه سطح ارتفاع از سطح دریا علامت‌گذاری شدند. نمونه‌ها توسط مته‌ سال‌سنج از درختان مورد نظر در سه سطح ارتفاعی از سطح دریا که شامل پائین‌بند (400 متر)، میان‌بند (900 متر) و بالا‌بند (1250 متر) تهیه شده‌اند. رفتار‌های رویشی متفاوت این گونه‌های درختی و عکس‌العمل آنها نسبت به تغییرات اقلیمی و محیطی مورد بررسی قرار گرفته است.}, keywords_fa = {گاهشناسی درختی,تولید چوب,راش,بلند‌مازو,ممرز,آستارا}, url = {https://ijwpr.areeo.ac.ir/article_109627.html}, eprint = {https://ijwpr.areeo.ac.ir/article_109627_37a24e8d467979238f314c14970a2187.pdf} } @article { author = {Moradpour, Neda and Mastari frahani, Mohammad reza and Shakeri, Alireza}, title = {Investigation on effect of acetylation and antioxidant on weathering resistance of wood/HDPE composite}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {4}, pages = {707-716}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2017.109628}, abstract = {To investigate the effect of acetylation and antioxidant  separately and together on discoloration and contact angle wood plastic composite due to weathering , composite s were made using popular wood flour and high density polyethylene . the sample were exposed  to natural weathering for 6 months. The results have shown that acetylation can relatively reduce the discoloration of weathered sample treatment than control sample.the antioxidant does not have any influence on color change but it seems that antioxidant could prevent  partly destruction of plastic . It should be mention acetylating increased the surface contact angle befor weathering. But it could not protect the sample surface after the exposure period. So that was zero after weathering.}, keywords = {Wood Plastic Composite,Acetylation,Antioxidant,change colour,Contact angle,weathering}, title_fa = {بررسی اثر استیلاسیون و آنتی اکسیدان بر روی مقاومت به هوازدگی فراورده چندسازه آرد چوب- پلی‌اتیلن سنگین}, abstract_fa = {به منظور بررسی اثر استیلاسیون و آنتی­اکسیدان به طور مجزا و همراه هم بر روی تغییر رنگ و زاویه تماس کامپوزیت چوب - پلاستیک هوازده، تخته­ها­یی از آرد چوب صنوبر و پلی‌اتیلن تهیه شد. نمونه‌ها به مدت ۶ ماه در معرض هوازدگی قرار گرفتند. نتایج نشان داد که­ کامپوزیت‌های چوب- پلاستیک با­ آرد ­چوب استیله شده تا حدودی تغییر رنگ کمتری نسبت به نمونه­های شاهد داشتند. همچنین این تیمار تا حدی لیگنین را در مقابل تخریب نوری حفاظت کرد. آنتی‌اکسیدان‌ مورد استفاده در این تحقیق اثری بر روی تغییر رنگ کامپوزیت­‌های چوب-پلاستیک نداشت اما به نظر می­رسد که­ آنتی‌اکسیدان­ توانسته از تخریب پلاستیک جلوگیری کند. همچنین قابل ذکر است که استیلاسیون سبب افزایش زاویه تماس در نمونه‌های تیمار شده قبل از دوره هوازدگی شد اما بعد از اتمام دوره هوازدگی قابلیت محافظت از سطح نمونه‌ها در برابر تخریب نوری نداشت به طوری که زاویه تماس کلیه نمونه‌ها بعد از دوره هوازدگی صفر شد. }, keywords_fa = {کامپوزیت چوب – پلاستیک,استیله,تغییررنگ,زاویه تماس,آنتی‌اکسیدان,هوازدگی}, url = {https://ijwpr.areeo.ac.ir/article_109628.html}, eprint = {https://ijwpr.areeo.ac.ir/article_109628_371947561c3f0a42bf0f78b3c9a30612.pdf} } @article { author = {Kazemi, Seid Mahmood}, title = {Field Test on Resistance of Alder and Horn Beech At Coastal waters of Amirabad port in Caspian Sea}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {4}, pages = {717-730}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2012.109629}, abstract = {In order to evaluate resistance of commercial wood species of alder and horn beech, logs were cut to lumbers. After caution of reduction moisture content, the lumbers were converted to special marine samples. The wood blocks were impregnated by CCA (Chrome- Cupper-Arsenic) and Betel method. Then treated and untreated wood samples were installed in one meter depth of water at seaside of Amirabad port, for 3, 6, 9 and 12 months. The result of observations showed that, the staining fungi and balanus were able to colonized surface of control samples. However, treated specimens were only occupied by balanus and with increasing time (3 to 12 months) balanus presence were major. The numerical result showed that untreated samples of alder were reduced in weight about 3.5% and treated samples not only had no weight losses but also increased in weight to12.21%. In the case of horn beech the result indicated that the weight loss of control was 2.7% and treated samples -7.9%. Also on surfaces of treated samples on both wood species were no sign of staining fungi. Finally could conclude the water of Caspian Sea is safe for using treated woods by many operations. }, keywords = {ALDER,horn Beech,staining fungi,balanus and CCA}, title_fa = {مطالعه میدانی دوام چوب‌‌ها‌‌ی توسکا و ممرز در آب‌‌ها‌‌ی ساحلی بندر امیرآباد دریای خزر}, abstract_fa = {به منظور ارزیابی دوام گونه­‌ها‌‌ی چوبی و صنعتی توسکا و ممرز، ابتدا گرده­بینه­‌ها‌‌ی این گونه­‌ها‌‌ به الوار تبدیل و پس از اطمینان از کاهش رطوبت، الوار‌ها‌‌ به نمونه­‌ها‌‌ی ویژه تست­‌ها‌‌ی دریایی اندازه­بری شدند. نمونه­‌ها‌‌ی آماده­شده با ماده حفاظتی مس- کروم- ارسنیک (CCA) با روش سلول­پر اشباع گردیدند. جهت آزمایش میدانی، نمونه­‌ها‌‌ی تیمارشده و شاهد به ساحل دریا منتقل و در ایستگاه ماهی‌گیری امیرآباد در عمق یک متری نصب شدند. نتایج ارزیابی­ مشاهد‌ها‌‌ی از اثر‌ها‌‌ی موجودات دریایی بر روی نمونه­‌ها‌‌ پس از مدت زمان سه، شش، نه و دوازده ماه ثبت گردید. این نتایح نشان داد که قارچ­‌ها‌‌ی رنگ­کننده چوب و همچنین بالانوس­‌ها‌‌ی دریایی قادرند نمونه­‌ها‌‌ی کنترل (شاهد) را اشغال کرده و یا بر روی آن‌ها‌‌ زندگی کنند. اما در روی نمونه­‌ها‌‌ی تیمارشده تعداد کمتری از بالانوس­‌ها‌‌ ساکن شدند. با افزایش مدت زمان ماندگاری نمونه­‌ها‌‌ی شاهد از 3 به 12 ماه، حضور این موجودات بر روی چوب­‌ها‌‌ بیشتر گردید. میزان کاهش وزن نمونه­‌ها‌‌ی شاهدِ توسکا در طول یک سال ماندگاری در ساحل دریا حدود 5/3 درصد بود. درحالی­که نمونه­‌ها‌‌ی تیمارشده توسکا نه تن‌ها‌‌ کاهش وزن نداشتند بلکه 21/12درصد افزایش وزن نیز پیدا کردند. علّت افزایش وزن نمونه‌‌ها‌‌ی تیمارشده احتمالاً بر اثر جذب املاح آب دریا بوده است. در خصوص گونه ممرز نیز نتایج کم و بیش مشابه بود. به طوری که کاهش وزن نمونه­‌ها‌‌ی شاهد 7/2 درصد و تیمارشده دارای افزایش وزن 9/7 درصد بودند. برروی نمونه­‌ها‌‌ی تیمارشده هر دو گونه آثاری از حمله قارچ­‌ها‌‌ی رنگ­کننده مشاهده نشد. در پایان می­توان  نتیجه‌گیری کرد که کاربرد چوب­‌ها‌‌ی حفاظت شده در دریای مازندران برای بیشتر استفاده­‌ها‌‌ ایمن می­باشد.}, keywords_fa = {توسکا,ممرز,قارچ‌‌ها‌‌ی رنگ‌کننده,بالانوس و CCA}, url = {https://ijwpr.areeo.ac.ir/article_109629.html}, eprint = {https://ijwpr.areeo.ac.ir/article_109629_467de79ae519f87a0f398711cf7cc04a.pdf} } @article { author = {Maleki, Sadegh and Faezipour, Mohammad Mehdei and Ebrahimi, Ghanbar and Layeghi, mohammad}, title = {Investigation on bending moment resistance of L- shaped screwed corner joints constructed of Plywood members}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {4}, pages = {731-742}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2012.109630}, abstract = {The goal of this study was to investigate bending moment resistance of L-shaped screwed corner joints constructed of Plywood members. The thickness of plywood members was nominal 19mm that were compared with medium density fiberboard (MDF) and particleboard with 18mm thicknesses. Effects of thread screws (coarse and fine), screw diameter (3.5, 4 and 5 mm), and penetration depth (9, 15 and 28) on bending moment capacity of joints under diagonal tension were investigated. Test results indicated that a screw corner joint becomes stronger as either screw diameter or screw length is increased. Screw length was found to have a greater effect on moment capacity than the diameter. The highest bending moment resistance was observed for joints made with coarse screw which were 5 mm in diameter and 28 mm depth of penetration. The lowest bending moment resistance was observed in joints having fine screw, with 3.5 mm diameter and 9 mm penetrations. Results also showed that bending moment resistance with coarse thread drywall screws was higher than those of the fine thread drywall screws. Bending moment resistance of joints made of plywood was higher than those of joints made of medium density fiberboard (MDF) and particleboard.}, keywords = {Bending Moment Resistance,plywood,screw diameter,Screw Penetration depth,Diagonal tension}, title_fa = {بررسی ظرفیت لنگر‌خمشی اتصال‌های گوشه‌ای L شکل ساخته شده از تخته چند‌لا با پیچ}, abstract_fa = {در این مطالعه ظرفیت لنگر‌خمشی اتصال­های گوشه­ای L شکل ساخته شده از تخته چند­لا با پیچ مورد بررسی قرار گرفت. اعضای اتصال از تخته چندلا با ضخامت 19 میلی­متر بود و برای مقایسه از تخته خرده‌چوب و تخته فیبر با دانسیته‌ متوسط (MDF) با ضخامت اسمی 18 میلی­متر استفاده شد. همچنین اثر متغیرهای نوع رزوه (ریز و درشت)، قطر پیچ در سه سطح 5/3، 4 و 5 میلی­متر و طول نفوذ پیچ در سه سطح 9، 15 و 28 میلی­متر، بر ظرفیت لنگر‌خمشی اتصال­های L شکل زیر بار کششی بررسی شده است. نتایج نشان دادند که، ظرفیت لنگر‌خمشی اتصال با افزایش قطر و طول نفوذ پیچ افزایش می­یابد و طول نفوذ پیچ تاثیر بیشتری روی ظرفیت لنگر‌خمشی در مقایسه با قطر پیچ از خود نشان داد. ظرفیت لنگر‌خمشی در اتصال­های ساخته شده با پیچ رزوه درشت در مقایسه با اتصال­های ساخته شده با پیچ­ رزوه ریز بیشتر بود. بیشترین ظرفیت لنگر‌خمشی­ در اتصال­های ساخته شده با پیچ رزوه درشت به قطر 5 و طول نفوذ 28 میلی­متر و کمترین ظرفیت لنگر‌خمشی­ در اتصال­های ساخته شده با پیچ رزوه ریز با قطر 5/3 و طول نفوذ 9 میلی­متر مشاهده گردید. همچنین نتایج نشان دادند که اتصال­های ساخته شده از تخته چندلا ظرفیت لنگر‌خمشی بیشتری از اتصالات ساخته شده با MDF و تخته خرده‌چوب دارند. }, keywords_fa = {ظرفیت لنگر‌خمشی,تخته چندلا,قطر پیچ,طول نفوذ پیچ,بار کششی}, url = {https://ijwpr.areeo.ac.ir/article_109630.html}, eprint = {https://ijwpr.areeo.ac.ir/article_109630_6176f16df549eb5385b1cd33f1744d6c.pdf} }