@article { author = {Poozesh, Mostafa and Mansouri, Hamid Reza and Nosrati, babak and Samzadeh, Alireza}, title = {The effect of boric acid on the physical and mechanical properties of particleboard made to Urea-formaldehyde resin (UF)}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {31}, number = {1}, pages = {40-47}, year = {2016}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2015.102672}, abstract = {This objective of this investigation was to modify and improve the water resistance of urea formaldehyde (UF) bonded particleboard adding Boric acid to the resin. Four levels (1, 2, 3 and 4) of boric acid based on the dry weight of the bonder were added to the UF resin.  Then these mixtures were used to produce particleboard. Physical and mechanical properties were examined according to the ASTM, D1013-04. The results showed that the using of this additive increased the water absorption and thickness swelling resistance after 2 and 24 hours immersion in water. Also using this additive increased the internal bonding of the boards after 24 hours after immersion in water, compared to the control sample but in the case of dry samples, the internal bonding decreased compared to the control sample. However it was not lower than standard value. As the Boric acid levels increased to 2 percent, bending strength of the samples was increased compare to the control sample and after this level it was decreased. Also with increasing the levels to 4 percent, modulus of elasticity of boards were increased compare to the control sample}, keywords = {UREA FORMALDEHYDE,Boric acid,water absorption,Thickness swelling,Internal bonding}, title_fa = {تاثیر اسید بوریک بر روی خواص فیزیکی و مکانیکی تخته خرده چوب‌های ساخته شده با رزین اوره فرمالدهید (UF)}, abstract_fa = {هدف از انجام این پژوهش بررسی مقاومت در برابر آب تخته خرده چوب‌های ساخته شده با رزین اوره فرمالدهید (UF) به کمک افزودن اسید بوریک به این رزین بود. در این بررسی افزودنی مورد نظر به عنوان عامل متغیر در چهار سطح 1، 2، 3 و 4 درصد نسبت به وزن خشک چسب استفاده شد. پس از تهیه فراورده‌های مرکب، مقاومت‌های فیزیکی و مکانیکی بر اساس استاندارد ASTM, D1013-04 مورد بررسی قرار گرفت. نتایج نشان داد که استفاده از این افزودنی موجب افزایش مقاومت در برابر آب و واکشیدگی ضخامت 2 و 24 ساعت بعد از غوطه‌وری در آب، در تخته خرده چوب‌های ساخته شده با این رزین شد. همچنین استفاده از این افزودنی مقاومت چسبندگی 24 ساعت غوطه‌وری در آب نسبت به نمونه شاهد افزایش داد، اما در حالت خشک نسبت به نمونه شاهد باعث کاهش شد، هرچند این کاهش پایین‌تر از حد استاندارد نبود. با افزایش سطوح اسید بوریک تا 2 درصد مقاومت خمشی نمونه‌های ساخته شده نسبت به نمونه شاهد افزایش، و بعد از این سطح کاهش یافت. احتمال می‌رود این کاهش به علت تاثیر اسید بوریک بر روی الیاف سلولزی یا فیبر سلولزی باشد در اثر گرما باعث تخریب این الیاف و کم شدن مقاومت‌ خمشی می‌شود. همچنین با افزایش سطوح افزودنی ذکر شده تا سطح 4 درصد مدول الاستیسیته تخته-های ساخته شده نسبت به نمونه شاهد افزایش یافت.}, keywords_fa = {اوره فرمالدهید,اسید بوریک,جذب آب,واکشیدگی ضخامت,چسبندگی داخلی}, url = {https://ijwpr.areeo.ac.ir/article_102672.html}, eprint = {https://ijwpr.areeo.ac.ir/article_102672_b252aa25a6530a718d8be6e90b4c4b5c.pdf} }