@article { author = {Ziaei Tabari, Hassan and Khademieslam, Habibollah and Bazyar, Behzad and Hemmasi, Amir Homan}, title = {Investigation on possibility of making a Nano composite consist of Pebax and Nano cellulose}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {31}, number = {1}, pages = {92-104}, year = {2016}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2015.105606}, abstract = {A new kind of thermoplastic elastomer nano composite reinforced with nano cellulose fibers is reported. The first aim of this investigation was to study the interaction and dispersion of nano cellulose fiber into Pebax matrix. This copolymer is Polyether – b – Amide thermoplastic elastomer which is synthetized from renewable resources, and its hydrophilic character allows it to interact with nano cellulose. The interaction and reinforcement effect of nano cellulose at 3 levels of nano cellulose (1%, 3% and 5%) were examined by Scanning electron microscopes (SEM), Fourier transform infrared spectroscopy (FTIR) and Mechanical tests (young module, elongation at break and impact resistance). The results achieved from these tests were indicating appropriate effects of nano cellulose fibers for the strong interaction and close contact with polyamide phase of Pebax polymer which caused high mechanical properties (at 3% of nanoellulose)  in nano composites. The young module and impact resistance of nano composite were significantly increased.  }, keywords = {Thermoplastic elastomer,Nanocellulose fiber,nanocomposite,SEM,FTIR}, title_fa = {بررسی امکان ساخت نانوچندسازه ساخته شده از پباکس و نانوسلولز}, abstract_fa = {در این تحقیق یک نوع جدید از نانو چند سازه الاستومر ترموپلاستیک تقویت شده با فیبرهای نانو سلولز گزارش می شود. هدف از این مطالعه ابتدا بررسی برهمکنش و پخش نانو سلولز در داخل ماتریکس پباکس بوده است. این کوپلیمر (پباکس)، ترموپلاستیک الاستومر پلی اتر بلاک آمید می باشد که از منابع تجدید شونده بدست می آید و خصوصیت آب دوستی (گروه های عاملی) آن منجر به برهمکنش آن با نانو سلولز می گردد. برهمکنش و اثر تقویت کنندگی نانو سلولز در سه سطح 1، 3 و 5 درصد به وسیله میکروسکوپ الکترونی پویشی، طیف سنجی مادون قرمز و آزمون های مکانیکی (شامل مدول یانگ، افزایش طول تا نقطه شکست و مقاومت به ضربه) مورد بررسی قرار گرفت. همه نتایج بدست آمده دلالت بر اثر مناسب فیبرهای نانو سلولز بر برهمکنش قوی و تماس نزدیک با بخش پلی آمید ماتریکس پباکس دارد که موجب افزایش خواص مکانیکی نانو چند سازه گردیده است. مدول یانگ و مقاومت به ضربه نانو چندسازه، افزایش چشمگیری پیدا کرد.}, keywords_fa = {ترموپلاستیک الاستومر,فیبر نانوسلولز,نانوچندسازه,SEM,FTIR}, url = {https://ijwpr.areeo.ac.ir/article_105606.html}, eprint = {https://ijwpr.areeo.ac.ir/article_105606_bc8b07d28a80fb5c2fb38eb04e80bdbd.pdf} }