@article { author = {Hosseinkhani, Hossein}, title = {MDF Production from Date Palm Pruning Residues in Pilot plant Scale}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {29}, number = {4}, pages = {594-608}, year = {2014}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2014.10619}, abstract = {Iran is not rich in forest land and only 7.5 per cent of country covered by forest. So Iran has to import wood based panel annually. It is estimated that 100.000.000 Date Palms trees covered an area at about 770.000 ha around world, and Iran has got 220.000 ha. Because of several reasons Date palm trees should be pruned and each tree produce 10-20 kg residues annually. In this study, for making boards Date Palm pruning residues as raw material and employed UF resin as the binder. Steeming time (5 and 8 Min.), steeming time (135 and 145oC) and press time (1, 2 and 3 Min.) were used as variable factors and three boards were made in Pilot plant scale for each combination of variables. Samples of all made boards were tested by the methods of EN to obtain mean values of bending strength, and Internal bond strength (I.B). In addition samples of each type of board were tested for thickness swelling after soaking in water for 2 hours and 24 hours respectively. The results of this study show clearly that boards have higher mechanical properties than the MDF property requirements which is recommended by EN standard.}, keywords = {MEDIUM DENSITY FIBERBOARD,Date plam,Resin type,press temperature,press time,PHYSICAL AND MECHANICAL PROPERTIES}, title_fa = {ضایعات هرس نخل در تولید تخته فیبر با دانسیته متوسط (MDF) درمقایس نیمه صنعتی (Pilot Plant Scale)}, abstract_fa = {جهت برداشت خرما (محصول درخت نخل ) با کیفیت مناسب ، نخل می بایستی همه ساله هرس گردد. هر نخل بطور متوسط در حدود 34 کیلو ضایعات حاصل از هرس تولید می نماید که با احتساب 20 الی 27 میلیون تنه نخل در کشور حداقل 200 هزار تن ماده لیگنوسلولزی که قابلیت استفاده در صنایع تبدیلی از جمله نئوپان و MDF را دارند و همه ساله در کشور قابل دسترس می باشد. در این تحقیق ضایعات هرس نخل بعنوان ماده اولیه در ساخت MDF بکار گرفته و تخته ها در مقیاس نیمه صنعتی (Pilot plant scale) در دانشگاه (Gottingem, Germany) ساخته شدند. برای هر متغییر ساخت [ زمان بخار زنی در 2 سطح (5 و 8 دقیقه)، دمای بخار زنی در 2 سطح (135 و 145 درجه سانتیگراد و زمان پرس در 3 سطح (1، 2 . 3 دقیقه)] تعداد سه تخته ساخته و استاندارد EN برای ارزیابی خواص مکانیکی و فیزیکی مورد استفاده قرار گرفت. نتایج این تحقیق نشان می دهد که تقریبا تخته های تولیدی حداقل خواص مکانیکی توصیه شده توسط استاندارد EN را دارا می باشند و در صورت رفع مشکل بالا بودن در صد واکشیدگی ضخامتی تخته ها، الیاف ضایعات هرس نخل می تواند در صنایع تولید MDF مورد استفاده قرار گیرد.}, keywords_fa = {تخته فیبر با دانسیته متوسط,ضایعات هرس نخل,زمان بخار زنی,دمای بخار زنی,زمان پرس و ویژگیهای فیزیکی و مکانیکی}, url = {https://ijwpr.areeo.ac.ir/article_10619.html}, eprint = {https://ijwpr.areeo.ac.ir/article_10619_843eadaa29774c4608440b7298a3a91e.pdf} }