@article { author = {Sobhani Oskouie, Farvahl and Ghorbani, Maryam and Amini nasab, Saeid mojtaba}, title = {The Effect of Modification with Silan Compound on Physical Properties of Popolus}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {31}, number = {3}, pages = {458-471}, year = {2016}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2016.106281}, abstract = {The objectives of this research determine for optimum condition modification with effect of 3-(trimethoxysilyl) propyl methacrylate on physical properties of Poplar wood-polymer were performed. Test samples from Poplar species were divided to five levels: control, Acidified Ethanol/Silan/110 ˚C, Acidified Ethanol/Silan/150 ˚C, Ethanol / Silan / 150°C and Silan/150°C in two levels with and without Benzoyl peroxide. Samples were impregnated with silan compound according to vacuum-pressure method in experimental cylinder. Weight percent gain of Silan/Et/BP/150 ˚C level by 24/40% had the maximum value were determined. Bulking efficiency and OH groups substituted in Silan/AEt/150 level with 6.81 % and 1.10 mol/gr, respectively compared with the other levels.Modification were resulted to improve water absorption and dimensional stability that maximum dimensional stability in contain initiator level were determined. In immersion-dry period test, the highest and lowest bulking efficiency in Silan/AEt/150 and Silan/Et/150 were reported. Maximum of weight loss in immersion-dry test was determined in Silan/AEt/110 with the 3.6% value.Key words: physical properties, 3-(trimethoxysilyl) propyl methacrylate, Asidified Ethanol, bulking efficiency}, keywords = {physical properties,3-(trimethoxysilyl) propyl methacrylate,Asidified Ethanol,bulking efficiency}, title_fa = {تعیین شرایط بهینه اصلاح با ترکیب سیلانی و ویژگی‌های فیزیکی فرآورده}, abstract_fa = {این پژوهش با هدف تعیین شرایط بهینه اصلاح با ترکیب سیلانی 3-تری‌متوکسی‌سیلیل‌پروپیل‌متاکریلات و اثر آن بر خواص فیزیکی چوب صنوبر انجام‌شد. نمونه‌های آزمونی حاصل از گونه صنوبر در پنج سطح شاهد، ترکیب سیلانی/اتانول اسیدی در دو دمای 110 و 150 درجه‌سانتی‌گراد، ترکیب سیلانی/اتانول معمولی/دمای 150 درجه‌سانتی‌گراد در دو سطح با و بدون بنزوییل‌پراکساید گروه‌بندی‌شدند. نمونه‌ها با ترکیب سیلانی به روش خلاء- فشار در سیلندر آزمایشگاهی اشباع شدند. بیشترین افزایش‌وزن در سطح ترکیب سیلانی/ اتانول معمولی/ بنزوییل‌پراکساید/ دمای 150 درجه‌سانتی‌گراد به مقدار 40/24 درصد تعیین‌شد. ضریب حجیم‌کنندگی و جایگزینی گروه‌های هیدروکسیل در سطح ترکیب سیلانی/اتانول اسیدی/دمای 150 درجه-سانتی‌گراد به‌ترتیب، به مقدار 81/6 درصد و 10/1 مول‌بر‌گرم بیشترین مقدار را در مقایسه با سایر سطوح داشتند. اصلاح به کاهش جذب آب و بهبود ثبات ابعاد منتهی‌شد که بیشترین پایداری ابعاد در سطح حاوی آغازگر اندازه‌گیری‌شد. طی آزمون دوره‌ای غوطه‌وری‌-‌خشک کردن، بیشترین و کمترین ضریب حجیم‌کنندگی در نمونه‌های اصلاح‌شده با ترکیب سیلانی/اتانول اسیدی/‌دمای 150 درجه سانتی‌گراد و ترکیب سیلانی/اتانول معمولی/دمای 150 درجه‌سانتی‌گراد گزارش شد. بیش‌ترین افت‌وزن در آزمون غوطه‌وری‌-‌خشک کردن در سطح اتانول اسیدی/ سیلان/ 110 درجه‌سانتی‌گراد با مقدار 6/3 درصد، تعیین شد.}, keywords_fa = {خواص فیزیکی,3-تری‌متوکسی‌سیلیل‌پروپیل‌متاکریلات,اتانول اسیدی,ضریب حجیم‌کنندگی}, url = {https://ijwpr.areeo.ac.ir/article_106281.html}, eprint = {https://ijwpr.areeo.ac.ir/article_106281_10a9176783578f36b07a1ec6229619cd.pdf} }