@article { author = {Zamaninasab, Soheila and lashgari, amir and tajdini, azhang}, title = {The effect of the type of chair connection on the stress distribution and structural failure by to finite element method}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {32}, number = {1}, pages = {106-117}, year = {2017}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2017.107127}, abstract = {In this research, resistance and stress concentration on the seat structure were examined by changing the type of connection (tongue and groove connection , and double connection). platanus orientalis used to make wooden chairs. Moreover, we applied Ansys to calculate resistance and mechanical testing machine with a load of chairs 7/12 mm per minute to show the stress distribution on the chairs members . The results show that chairs by tongue and groove connection and having a simple structure and with bail , have more resistance and less stress distribution than a double chair with a simple structure and with indicating connection and the impact of the type of connection were significant on the chair resistance . The stress distribution shows that the maximum stress concentrations on the horizontal joints are visible . Finite element models show that the stress distribution is more uniform in chairs with tongue and groove connections.}, keywords = {dowel joint,Ansys software,Finite element method,stress distribution}, title_fa = {بررسی تاثیر نوع اتصال بر روی توزیع تنش و نحوه شکست سازه صندلی به روش عناصر محدود}, abstract_fa = {در این تحقیق مقاومت و تمرکز تنش بر روی سازه ی صندلی با تغییر نوع اتصال(اتصال کام و زبانه- اتصال دوبل) مورد بررسی قرار گرفت.برای ساخت صندلی ها از چوب چنار(platanus orientalis) استفاده و برای محاسبه ی مقاومت صندلی ها از دستگاه آزمون مکانیکی با سرعت بارگذاری 7/12 میلی متر بر دقیقه و برای نشان دادن توزیع تنش بر روی عضوهای صندلی از نرم افزار Ansys استفاده شد.نتایج نشان می دهد که صندلی با اتصال زبانه و کام و ساختاری ساده و با قید دارای مقاومت بیشتر و توزیع تنش کمتری نسبت به صندلی با اتصال دوبل با ساختار ساده و با قید بوده و تاثیر نوع اتصال روی مقاومت صندلی معنی دار بود.توزیع تنش نشان می دهد که تنش حداکثر بر روی اتصالات افقی صندلی قابل مشاهده می باشد.مدل های عناصر محدود نشان می دهند که توزیع تنش در صندلی های با اتصال زبانه و کام یکنواخت تر می باشد}, keywords_fa = {اتصال دوبل,نرم افزار انسیس,توزیع تنش,عناصر محدود}, url = {https://ijwpr.areeo.ac.ir/article_107127.html}, eprint = {https://ijwpr.areeo.ac.ir/article_107127_d1f32d36fa79df6644a7f0bd3378c7ae.pdf} }