@article { author = {Sepahvand, ُSima and Zahedi, Meysam and vilki, Samaneh and Tabarsa, Taghi}, title = {Construction of Particlboard Using Tannin-Based Phenol Adhesive}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {4}, pages = {655-663}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2012.109624}, abstract = {Tannins are the most desirable natural, renewable phenolic components which obtained from plant resources. The phenolic nature of tannins causes that this materials react with formaldehyde and form tannin-formaldehyde resins. In this study, the raw materials of wheat straw and forest woods were used for producing of particleboard (with a ratio of about 50 to 50 percent) using phenol formaldehyde based on tannin. Tannin as a powder was added at 10 and 20 percent (based on dry weight of resin solution) to formalin 35% for glue making. Particleboards were made at two range of thickness, 10 and 16 mm and their properties of including bending strength, modulus of elasticity, internal bonding, thickness swelling and water absorption were measured. The results from this investigation showed that the strength properties of the made boards from combined wood chips were lower than those from pure wood chips. Also, increasing of tannin usage into phenol formaldehyde caused to increase internal bonding or adhesion, swelling and water absorption (2 and 24 hours) of the boards.}, keywords = {Particleboard,WHEAT STRAW,Tannin-Phenol formaldehyde Resins. Strength Properties}, title_fa = {ساخت تخته خرده‌چوب با استفاده از چسب فنول بر پایه تانن}, abstract_fa = {تانن‌ها یکی از مطلوب‌ترین ترکیب‌های فنولی طبیعی و تجدیدپذیر بوده که از منابع گیاهی به دست می‌آیند. ماهیت فنولی تانن‌ها باعث می‌شود که این مواد در واکنش با فرمالدهید شرکت کرده و رزین‌های تانن فرمالدهید تشکیل دهند. در این تحقیق برای ساخت تخته خرده‌چوب از مواد اولیه کاه‌گندم و خرده‌چوب جنگلی (با نسبت50 به50 درصد) و چسب فنول فرمالدهید بر پایه تانن استفاده شد. برای ساخت چسب، پودر تانن در دو سطح 10و20 درصد بر اساس وزن خشک رزین به محلول فرمالین 35 درصد اضافه شد تخته‌ها در دو محدوده ضخامت  10و16 میلی‌متری ساخته شده و ویژگی‌های آنها شامل مقاومت‌خمشی، مدول‌الاستیسیته، چسبندگی‌داخلی، واکشیدگی‌ضخامتی و جذب آب اندازه‌گیری شدند. نتایج حاصل از این بررسی نشان داد که مقاومت تخته‌های ساخته شده از مخلوط کاه‌گندم و خرده‌چوب نسبت به تخته خرده ساخته شده از خرده‌چوب خالص کمتر است. همچنین افزایش مصرف تانن در چسب فنول فرمالدهید موجب افزایش چسبندگی‌داخلی و افزایش واکشیدگی و میزان جذب آب تخته (در 2 و 24 ساعت) شد. }, keywords_fa = {تخته خرده‌چوب,کاه‌گندم,چسب تانن- فنول فرمالدهید,ویژگی‌های مقاومتی}, url = {https://ijwpr.areeo.ac.ir/article_109624.html}, eprint = {https://ijwpr.areeo.ac.ir/article_109624_34a9e7eb4161f26913b68a21d7738f9d.pdf} }