@article { author = {Vaysi, Ramin and Salimifar, Mohammad reza}, title = {Investigation of Optical and Mechanical Properties of Bleached Chemi-mechanical Pulps (CMP) with Oxygen, Hydrogen Peroxide and Sodium Dithionite Stages}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {32}, number = {3}, pages = {311-321}, year = {2017}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2017.105625.1330}, abstract = {This study and it aim was accomplished on the effect of TCF bleaching on optical and mechanical properties of CMP pulp. For this purpose, some unbleached CMP pulps were randomly selected from Mazandaran Wood and Paper Industries (MWPI). Then these pulps were bleached with two and three OP, OPY, PY and O(Eo)P bleaching stages by using oxygen(O), alkali extraction with hydrogen peroxide(Eo), sodium dithionite(Y) . The hand sheets with 70 gr/m2 were prepared from above-mentioned of pulps, and then the optical and mechanical properties were measured and compared according by using TAPPI Standard test methods. The results showed that brightness, greenness, folds breaking length, tensile and tear strength were increased and opacity and a* factor were decreased. In general, role of three O(Eo)P stages and two OP and PY bleaching stages were better than P stage and unbleached CMP pulp mill in improve of brightness and its paper strength, too.}, keywords = {CMP pulp,Bleaching Stage,hydrogen peroxide,Oxygen,TCF Bleaching,Optical and mechanical properties}, title_fa = {بررسی ویژگی های نوری و مقاومتی خمیرکاغذ شیمیایی- مکانیکی(CMP ) رنگبری شده با توالی های اکسیژن، پروکسید هیدروژن و دی تیونیت سدیم}, abstract_fa = {این تحقیق با هدف تاثیر رنگبری کاملاً بدون کلر (TCF) بر ویژگی های نوری و مقاومتی کاغذ حاصل از خمیرکاغذCMP انجام شد. به همین منظور مقداری خمیر رنگبری نشده شیمیایی- مکانیکی((CMP به صورت تصادفی از کارخانه چوب و کاغذ مازندران انتخاب شد. سپس این خمیرها با توالی های دو و سه مرحله ای OP، OPY، PYو P(OE)O و با استفاده از اکسیژن(O)، پروکسید هیدروژن(P)،استخراج قلیایی با اکسیژن(OE) و دی تیونیت سدیم(Y) رنگبری گردید. از خمیرکاغذ های مذکور کاغذهای دست ساز با وزن پایه gr/m2 70 تهیه و خواص نوری و مقاومتی آن ها طبق آزمون های استاندارد TAPPI اندازه گیری و مقایسه گردید. نتایج نشان داد که در اثر رنگبری بدون ترکیبات کلر(TCF) روشنی، سبز رنگی، مقاومت های به پارگی، کششی، ترکیدن، طول پارگی و تاه شدن افزایش و ماتی و فاکتورa* کاغذ های حاصل از خمیرکاغذ CMP کاهش را نشان می دهد. به طور کلی، نقش توالی رنگبری سه مرحله ای P (Eo)O و همچنین توالی های رنگبری دو مرحله ای (PY) و (OP) در سفید سازی خمیرکاغذ CMP و بهبود روشنی و مقاومت های کاغذ حاصل موثر تر از توالی یک مرحله ای (P) و خمیر رنگبری نشده کارخانه بوده است.}, keywords_fa = {خمیر CMP,توالی رنگبری,پروکسید هیدروژن,رنگبری بدون ترکیبات کلر,خواص نوری و مقاومتی}, url = {https://ijwpr.areeo.ac.ir/article_112379.html}, eprint = {https://ijwpr.areeo.ac.ir/article_112379_2095c8d873c9932b14d36e1c78d6c4d2.pdf} }