@article { author = {Vaysi, Ramin and Bagheri, Ali reza}, title = {Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {32}, number = {4}, pages = {473-485}, year = {2017}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2017.108836.1377}, abstract = {The objective of this research was accomplished on the effects of total chlorine free (TCF) and elemental chlorine free (ECF) bleaching on optical and mechanical properties of bagasse soda pulps. For this purpose, some unbleached bagasse soda pulps were randomly selected from Ahvaz Pars industry. Then these pulps were bleached with one, two and three P, OP, OPY, O(Ep)P, EHP and O(Ep)H bleaching stages by using oxygen(O) hydrogen peroxide(P), alkali extraction with hydrogen peroxide(Ep), sodium hypochlorite(H) and sodium dithionite(Y). The hand sheets with 70 gr/m2 were prepared from above-mentioned of pulps, and then the optical and mechanical properties were measured and compared according by using TAPPI standard test methods. The results showed that brightness, greenness, tear (except EHP stages), tensile, burst, breaking length strengths and folds were increased and opacity and a* factor were decreased by ECF and TCF bleaching stages. The effects of TCF bleaching stages were more sensible than ECF bleaching stages in improve of bagasse soda properties, too. In general, role of three OPY and O(Ep)H stages and two OP bleaching stages were better than EH(control) stage and unbleached bagasse soda pulps mill in improve of brightness and its paper strengths, too.}, keywords = {Soda pulp,Bagasse,Bleaching Stage,ECF,TCF,Optical and mechanical properties}, title_fa = {بررسی و مقایسه ویژگی‌های خمیر‌کاغذ سودای باگاس رنگبری شده با توالی های کاملا بدون کلر(TCF) و بدون کلر(ECF}, abstract_fa = {این تحقیق با هدف بررسی و مقایسه اثرات رنگبری کاملا بدون کلر(TCF) و بدون کلر(ECF) بر ویژگی‌های نوری و مقاومتی کاغذ حاصل از خمیرکاغذ سودای باگاس انجام شد. به همین منظور مقداری خمیرکاغذ رنگبری نشده سودای باگاس به صورت تصادفی از کارخانه پارس اهواز انتخاب شد. سپس این خمیرکاغذ ها با توالی های یک، دو و سه مرحله ای P، OP ، OPY ، P(PE)O، EHP و H(PE)O با استفاده از اکسیژن(O)، پروکسید هیدروژن(P)، استخراج قلیایی با پروکسید هیدروژن(PE)، هیپوکلریت سدیم(H) و دی تیونیت سدیم (Y) رنگبری گردید. از خمیرکاغذ های مذکور کاغذهای دست ساز با وزن پایه gr/m2 70 تهیه و خواص نوری و مقاومتی آن ها طبق آزمون های استاندارد TAPPI اندازه گیری و مقایسه گردید. نتایج نشان داد که در اثر رنگبری کاملا بدون کلر(TCF) و بدون کلر(ECF) روشنی، سبز رنگی، مقاومت های به پارگی(بجز توالیEHP )، کششی، ترکیدن، طول پارگی و تاه شدن افزایش و ماتی و فاکتورa* کاغذ های حاصل کاهش را نشان می دهد. همچنین تاثیرتوالی های TCF در بهبود ویژگی‌های خمیرکاغذ های رنگبری شده باگاس محسوس تر از توالی های ECFمی باشد. به طور کلی، نقش توالی‌های رنگبری سه مرحله ایOPY و O(Ep)H و همچنین توالی رنگبری دو مرحله ای OP در سفید سازی و بهبود روشنی و مقاومت های کاغذ حاصل موثر تر از توالی دو مرحله ای EH (شاهد) و خمیرکاغذ رنگبری نشده سودای باگاس کارخانه بوده است.}, keywords_fa = {خمیرسودا,باگاس,توالی رنگبری,TCF,ECF,ویژگی نوری و مقاومتی}, url = {https://ijwpr.areeo.ac.ir/article_112380.html}, eprint = {https://ijwpr.areeo.ac.ir/article_112380_d2073ae23941474b125798d8d01a0b81.pdf} }