@article { author = {Zeinaly, Farhad and Kazemi Tabrizi, Ali and Einollahi, yashar and Asadi Malek Jahan, Faraz}, title = {Investigating the effect of using oxygen delignification process on kenaf bast kraft pulp properties}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {33}, number = {3}, pages = {369-380}, year = {2018}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2018.120935.1464}, abstract = {The first act to ameliorate bleaching process is the major elimination of lignin. Actually, the use of oxygen delignification stage before bleaching process is the essential stage in improving bleaching process and reducing process emission. In this study, the effect of conducting oxygen-delignifying process under different process condition, on chemical, physical, mechanical and optical properties of kenaf bast kraft pulp was investigated. The kenaf bast kraft pulp with the kappa number of 22, 1154 ml/g viscosity, and 38% ISO brightness was prepared. Oxygen-delignifying treatments were carried out with three different temperatures of 90, 100 and 110°C, and two oxygen pressures of 5 and 7 bars, with and without magnesium sulfate addition. Results indicated that oxygen delignification treatment led to intense decrease in pulp kappa number, while the pulp viscosity did not change significantly. Results of measuring delignified pulp viscosity showed that the magnesium sulfate addition caused to prevention of pulp viscosity downfall. The increase in reaction temperature had a significant effect on the process improvement, but raising the oxygen pressure did not have a meaningful effect on the process. Also, the pulp brightness was increased about 7%.}, keywords = {Oxygen delignification,kenaf bast kraft pulp,kappa number,viscosity,effluent}, title_fa = {بررسی تاثیر استفاده از فرایند لیگنین زدایی با اکسیژن برروی ویژگی های خمیرکاغذ کرافت پوست کنف}, abstract_fa = {                                                                                       DOR:98.1000/1735-0913.1397.33.369.64.3.1576.1601 حذف عمده لیگنین خمیرکاغذ گامی مهم در بهبود فرایند رنگبری است. درحقیقت اجرای مرحله لیگنین‌زدایی با اکسیژن قبل از فرایند رنگبری، مرحله‌ای اساسی در بهینه‌سازی و کاهش آلودگی فرایند رنگبری خواهد بود. در این پژوهش، تاثیر اجرای فرایند لیگنین‌زدایی با اکسیژن تحت شرایط فرایندی متفاوت برروی ویژگی‌های شیمیایی، فیزیکی، مکانیکی و نوری خمیرکاغذ کرافت پوست کنف بررسی گردید. خمیرکاغذ کرافت پوست کنف با عدد کاپای 22، گرانروی 1154 میلی‌لیتر بر گرم و درجه روشنی 38 درصد ایزو آماده‌سازی گردید. تیمارهای لیگنین‌زدایی با اکسیژن در سه درجه حرارت 90، 100 و 110، با مقادیر 5 و 7 بار فشار اکسیژن و با و بدون مصرف سولفات منیزیم انجام گرفت. نتایج نشان داد که اجرای فرایند لیگنین‌زدایی با اکسیژن به‌میزان قابل توجهی عدد کاپای خمیرکاغذ را کاهش داد، حال آنکه گرانروی خمیرکاغذ کاهش چشمگیری نیافت. اندازه‌گیری گرانروی خمیرکاغذها پس از فرایند لیگنین‌زدایی، نشان داد که مصرف سولفات منیزیم سبب جلوگیری از کاهش گرانروی خمیرکاغذها گردید. افزایش دمای واکنش در بهبود فرایند تاثیر بسزایی داشته، درحالیکه افزایش فشار اکسیژن برروی فرایند تاثیر چندانی نداشت. میزان روشنی خمیرکاغذها نیز درحدود 7 واحد افزایش یافت.}, keywords_fa = {لیگنین زدایی با اکسیژن,خمیرکاغذ کرافت پوست کنف,عدد کاپا,ویسکوزیته,پساب}, url = {https://ijwpr.areeo.ac.ir/article_116677.html}, eprint = {https://ijwpr.areeo.ac.ir/article_116677_32f6888c209d257babdf4cc5122c1220.pdf} }