@article { author = {Tasoji, Mohammad and Nourbakhsh, Amir and Kargarfard, Abolfazl and Hosseinkhani, Hossein}, title = {The Effect of Lignocellulosic Material and Nanoclay on Physical, Mechanical and Morphological Properties of Wood Plastic Composite}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {27}, number = {2}, pages = {189-201}, year = {2012}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2012.117060}, abstract = {Physical and mechanical properties wood-plastic composites produced from wheat and rice straw particles, nano-clay, polypropylene and MAPP were investigated. The amount of polypropylene and lignocellulosic materials were selected as 60 wt% and 40 wt% respectively. The Nano-clay was added in three levels 0, 2 and 4 wt% and the amount of coupling agent was fixed and set to 2 wt% for all treatments except for the control. The control samples were made from polypropylene and lignocellulosic materials with neither nanoclay nor coupling agent was used. The results showed that the tensile and flexural strengths were decreased by the addition of nanoparticles. For tensile and flexural modulus, adding 2 wt% of nanoclay led to an increase in both moduli. However there was a decrease in both moduli when 4 wt% nanoclay was added. The impact strength decreased adding nanoclay. There was a decrease in 24 hour water absorption when 2 wt% of nanoclay was added but an increase was observed in 4 wt% of nanoclay level. According to the mechanical and physical properties of all the treatments, the samples made of rice straw showed better results compare to wheat straw samples due to their high amount of silica and its compatibility with nanoclay.  SEM test was performed.}, keywords = {Composite,Nanoclay,poly propylene,WHEAT STRAW,Rice straw,physical properties,MECHANICAL PROPERTIES}, title_fa = {اثر نوع ماده لیگنوسلولزی و نانورس بر خواص فیزیکی، مکانیکی و مورفولوژیکی چندسازه چوب پلاستیک}, abstract_fa = {در این تحقیق با استفاده از ذرات کاه‌گندم و برنج، ذرات نانورس، پلی­پروپیلن و جفت‌کننده، چوب – پلاستیک ساخته شد و خواص فیزیکی و مکانیکی آن مورد ارزیابی قرار گرفت. مقدار مصرف ماده زمینه پلاستیکی(پلی­پروپیلن) 60 درصد وزنی و ماده لیگنوسلولزی 40 درصد وزنی در نظر گرفته شد. میزان نانورس اضافه شده در سه سطح 0، 2 و 4 درصد و میزان ماده جفت‌کننده، 2 درصد وزنی در تمام تیمارها به‌جز تیمار شاهد در نظر گرفته شد. نمونه­های تیمار شاهد بدون اضافه کردن جفت‌کننده و ذرات نانورس و تنها با استفاده از پلی­پروپیلن و ماده لیگنوسلولزی ساخته شدند. مدول‌های کششی و خمشی با افزایش 2 درصد نانورس افزایش یافته ولی در سطح 4 درصد شاهد کاهش مدول‌ها و با افزایش نانورس مقاومت به ضربه کاهش یافتند. خواص جذب آب 24 ساعتی نمونه­های ساخته شده نیز با اضافه کردن 2 درصد نانورس کاهش یافته و در سطح 4 درصد نانورس افزایش قابل توجهی مشاهده شد. البّته در تمام تیمارها، نمونه­های ساخته شده از کاه‌برنج به دلیل وجود سیلیس بیشتر و سازگاری بیشتر با ذرات نانورس، ویژگی­های فیزیکی و مکانیکی مطلوب‌تری نسبت به نمونه­های تولید شده از کاه‌گندم داشتند. به‌منظور بررسی دقیق­تر نتایج از میکروسکوپ الکترونی پویشی استفاده شد.}, keywords_fa = {چندسازه,نانورس,پلی‌پروپیلن,کاه‌گندم,کاه‌برنج,خواص فیزیکی,خواص مکانیکی}, url = {https://ijwpr.areeo.ac.ir/article_117060.html}, eprint = {https://ijwpr.areeo.ac.ir/article_117060_8bbfc25bf0b6d2ca737a0d81c4f9d6a8.pdf} }