@article { author = {Hamzeh, Yahya and Mirzaei, Babak and Dost hosseini, Kazem and Ashori, Alireza and Rashedi, Kambiz and olfat, Alyeh}, title = {Chemical composition of the paper making solid wastes}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {26}, number = {2}, pages = {281-290}, year = {2011}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2011.117186}, abstract = {Characteristics of pulp and paper mill solid wastes depend generally on the raw materials, stock preparation process as well as wastewater treatment plant. In order to determine the best application of paper mill solid wastes, physicochemical properties of solid waste produced in the Mazandaran Wood and Paper Industry Co. and Latif Paper Co. were analyzed. The dry content, pH, fiber dimensions, composition of organic and inorganic compounds of the both solid were analyzed. The dry content of the produced wastes in Latif and Mazandran were determined as 69.3 and 36.7 percent, respectively. The pH of both wastes was close to neutral (pH/7.0). The fiber  length of  Latif and Mazandaran wastes were 1.68 and 1.08 mm, respectively. In addition, the total amount of carbohydrates, glucose and mannose quantity in the Latif waste were determined as 48.09, 29.5 and 7.2 percent that were higher than that of Mazandaran waste. In the contrary, the lignin, xylose and galactose content of Mazandaran waste were determined as 15.3, 17.3 and 3.7 percent that were higher than those of Latif waste. The mineral content of Latif and Mazandarn wastes were determined 44.7 and 39.5 percent, respectively. XRF analyses revealed that the predominant elements in the incinerated ash of both wastes contained calcium oxide, aluminum oxide and silicon oxidethat can be used as raw material for lightweight concrete and zeolite synthesis.}, keywords = {}, title_fa = {ترکیب شیمیایی پسماندهای جامد صنایع کاغذسازی}, abstract_fa = {خواص فیزیکی- شیمیایی پسماندهای جامد صنایع خمیر و کاغذ به نوع الیاف مورد استفاده، فرایند آماده‌سازی خمیر و همچنین به سیستم تصفیه پساب واحد تولیدی بستگی دارد. برای تعیین بهترین کاربری پسماندهای صنایع کاغذسازی، خواص فیزیکی- شیمیایی پسماندهای جامد کارخانه‌های‌ چوب و کاغذ مازندران و کاغذسازی لطیف تجزیه و تحلیل شد. مقدار مواد جامد، pH، ابعاد الیاف و همچنین ترکیب شیمیایی مواد آلی و غیر آلی موجود در این پسماندها تجزیه شد. نتایج نشان داد که درصد خشکی پسماند مازندران 7/36 و کاغذسازی لطیف 3/69 درصد است. pH هر دو پسماند تقریباً خنثی بود. به طوری که طول الیاف فیبری موجود در پسماندهای کاغذسازی لطیف و مازندران به‌ترتیب به مقدار 68/1 و 08/1 میلی‌متر تعیین شد. همچنین مقدار کل کربوهیدرات‌ها، گلوکز و مانوز پسماند کاغذسازی لطیف به‌ترتیب 09/48، 5/29 و 2/7 درصد تعیین شد که بیشتر از مقدار آنها در پسماند کاغذسازی مازندران بود. ولی مقدار لیگنین، زایلوز و گالاکتوز پسماند کاغذسازی مازندران به ترتیب به مقدار 3/15، 3/17 و 7/3 درصد تعیین شد که بیشتر از مقدار آنها در پسماند کاغذسازی لطیف بود. مواد معدنی پسماند کاغذسازی لطیف و مازندران به‌ترتیب 7/44 و 5/39 درصد تعیین شد.آنالیز XRF خاکستر مواد معدنی نشان داد که ترکیب غالب این مواد شامل اکسیدهای کلسیم، سیلیسیم، آلومینیوم و منیزیم است که می‌تواند به‌عنوان مواد اولیة محصولاتی مانند بتن‌های سبک و زئولیت استفاده شوند.}, keywords_fa = {پسماند جامد,کاغذسازی,مقدار مواد جامد,خواص فیزیکی,طول الیاف,ترکیب شیمیایی,کربوهیدرات‌ها,مواد معدنی}, url = {https://ijwpr.areeo.ac.ir/article_117186.html}, eprint = {https://ijwpr.areeo.ac.ir/article_117186_8b626896b034fa14f12c8f2b875805a8.pdf} }