@article { author = {Dosthosseini, Kazem and Moezi poor, Bita}, title = {Utilization of date palm and kenaf fibers for reinforcement of practical properties of plywood}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {26}, number = {3}, pages = {495-510}, year = {2011}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2011.117209}, abstract = {Utilization of date palm and kenaf fibers for reinforcement of plywood was investigated and after making plywood with layers of horn beam wood (Carpinus betulus), physical and mechanical properties were analyzed. Variables were the type of fiber (kenaf and date palm), the type of filler (wheat flour and waste paper) and the content of resin (150 and 200 g/m2). The results of this study show that utilization of kenaf and date palm fibers was effective in improvement of physical and mechanical properties of plywood. The mean of specific gravity for reinforced plywood with kenaf and date palm fibers was 0.723 and 0.739 g/cm3 respectively and specific gravity of control was 0.656 g/cm3. The least water absorption and thickness swelling were about reinforced boards with kenaf fibers and 200 g/m2 resin with wheat flour filler .The reinforced boards with kenaf fibers and 150g/m2 resin with wheat flour filler have the best mechanical properties. So the kenaf fibers for reinforcement of properties of plywood were better than date palm fibers and the utilization of wheat flour in manufacture of these boards had better results compared to waste paper filler.}, keywords = {plywood,UREA FORMALDEHYDE,date palm fibers,kenaf fibers,wheat flour,waste paper}, title_fa = {استفاده از الیاف نخل و کنف برای تقویت ویژگی‌های کاربردی تخته‌لایه}, abstract_fa = {در این تحقیق امکان استفاده از الیاف نخل و کنف برای تقویت تخته‌لایه مورد بررسی قرار گرفته است و پس از ساخت تخته‌لایه با استفاده از لایه‌های چوبی گونه ممرز ویژگی‌های فیزیکی و مکانیکی تخته‌های حاصل مورد ارزیابی و تجزیه و تحلیل قرار گرفت. در این بررسی عوامل متغیر شامل نوع الیاف (کنف و نخل)، نوع فیلر (آرد گندم و کاغذ تحریر باطله) و مقدار چسب (150 و200 (g/m2 بوده است. بررسی نتایج نشان می‌دهد که استفاده از الیاف نخل و کنف در بهبود ویژگی‌های فیزیکی و مکانیکی تخته‌لایه مؤثر بوده است. بنابراین میانگین جرم ویژة تخته‌های تقویت شده با الیاف نخل و کنف به‌ترتیب g/cm3 723/0 و g/cm3  739/0 و میانگین جرم ویژه نمونه‌های شاهد g/cm3656/0 بوده است. کمترین مقدار جذب آب و واکشیدگی ضخامت مربوط به تخته‌هایی بود که بوسیله الیاف کنف تقویت شده و در ساخت آنها 200 گرم در مترمربع رزین با آرد گندم استفاده شده بود. تخته‌هایی که بوسیله الیاف کنف تقویت شدند و150 گرم در مترمربع رزین با فیلر آرد گندم در ساخت آنها به کار رفت دارای بهترین خواص مکانیکی بودند. بنابراین الیاف کنف برای تقویت ویژگی‌های تخته‌لایه مناسبتر از الیاف نخل بود و استفاده از آرد گندم به‌عنوان فیلر در ساخت این تخته‌ها نتایج بهتری نسبت به فیلر کاغذ باطله داشت.}, keywords_fa = {تخته‌لایه,اوره فرمالدهید,الیاف نخل,الیاف کنف,آرد گندم,کاغذ باطله}, url = {https://ijwpr.areeo.ac.ir/article_117209.html}, eprint = {https://ijwpr.areeo.ac.ir/article_117209_7f6bc5b0f4680ffc69e05d6e8fa0d3ee.pdf} }