@article { author = {Enayati, Ali akbar and Eslah, Farnaz}, title = {Effect of great size wood particles on density profile and physical -mechanical properties of particleboards made from poplar}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {26}, number = {4}, pages = {719-731}, year = {2011}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2011.117248}, abstract = {This study was conducted to investigate the effect of mixing great size wood particles of poplar with appropriate size particles of the same species, on density profile and physical -mechanical properties of the made particleboard, this study was carried out. One layer boards were made by use of appropriate and great size residue particles on a 7mm pores screen with the ratio of 0/100, 15/85, 30/70, and 45/55 respectively. The results obtained from measured physical and mechanical properties showed that increasing great particles ratio had no negative effect on properties of boards. Increasing the amount of this particles in boards composition, caused increasing internal bonding and decreasing water absorption and thickness swelling levels. In addition, there were no significant differences within boards made from different treatments MOR and MOE properties. Regarding results of this study, when %15 great particles was used with appropriate particle ones, boards had minimum reduction of mechanical strength. Investigation of density profile showed the same result. But all properties of the boards were over the determined limit in terms of relevant standard values even in the case of using 45% great particles.}, keywords = {PARTICLEBOARDS,geometry,Poplar,PHYSICAL AND MECHANICAL PROPERTIES,DENSITY PROFILE}, title_fa = {اثر اختلاط خرده‌های چوب درشت بر پروفیل دانسیته و خواص فیزیکی- مکانیکی تخته خرده‌چوب ساخته شده از چوب صنوبر}, abstract_fa = {هدف از انجام این تحقیق بررسی اثر اختلاط خرده‌های چوب درشت صنوبر با خرده‌های چوب با اندازة مناسب همین گونه برپروفیل دانسیته و خواص فیزیکی- مکانیکی تخته خرده‌چوب‌های ساخته شده از آن بوده است. به این منظور با استفاده از خرده‌های چوب درشت باقی مانده روی الک با درشتی 7میلی‌متر و خرده‌های چوب با ابعاد معمول و با نسبت اختلاط:  0به100، 15 به85،30 به70 و45به 55تخته‌های یک لایه به ضخامت 15 میلی‌متر با جرم مخصوص 65/0 گرمبر سانتیمترمکعب ساخته شد. نتایج حاصل از اندازه‌گیری ویژگی‌های فیزیکی و مکانیکی تخته‌ها نشان داد که افزودن خرده‌های چوب درشت اثر منفی بر خواص فیزیکی و مکانیکی تخته‌ها نداشته است، به طوری که با افزایش مقدار این خرده‌های چوب در ساختار تخته‌ها چسبندگی داخلی افزایش، مقاومت‌خمشی و مدول‌گسیختگی بدون تغییر و جذب آب و واکشیدگی ضخامت آنها کاهش یافت. با توجه به نتایج این تحقیق مشخص گردید که استفاده از 15 درصد خرده‌های چوب درشت به همراه خرده‌های چوب با اندازة مناسب، در تخته‌های ساخته شده کمترین افت را در مقاومت‌های مکانیکی آنها خواهیم داشت، به نحوی که رد بررسی پروفیل دانسیته نیز همین نتیجه را نشان می‌دهد. امّا اگر از خرده‌چوب‌های درشت به میزان 45 درصد استفاده شود، تمامی ویژگی‌های فیزیکی و مکانیکی تخته‌ها بیشتر از حد تعیین شده در استاندارد مربوط به این گونه تخته‌ها می‌باشد.}, keywords_fa = {تخته خرده‌چوب,فرم هندسی خرده‌چوب‌ها,صنوبر,خواص فیزیکی و مکانیکی,پروفیل دانسیته}, url = {https://ijwpr.areeo.ac.ir/article_117248.html}, eprint = {https://ijwpr.areeo.ac.ir/article_117248_4aceaf6dc9845f8cce5832f17ab62454.pdf} }