@article { author = {Kazemi najafi, Saeid and Azimi dalrstani, Ali}, title = {Effect of Beech bark Content on Physical and Mechanical Properties of Bark Flour-Polypropylene Composites}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {26}, number = {4}, pages = {811-823}, year = {2011}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2011.117256}, abstract = {In this study, physical and mechanical properties of composites made of bark flour and polypropylene were studied and compared with those of wood flour-polypropylene composites. Bark flour content were adjusted at three levels (40, 50 and 60%) and compounded at absence and presence of 2% compatibilizer (MAPP) in a twin screw extruder to produce the bark flour-polypropylene composites. The wood flour-polypropylene composites also were manufactured at 60 filler weight wood flour loading. The results showed that water absorption and thickness swelling of composites containing bark flour increase with increasing bark flour content. The composites containing bark flour exhibited lower water absorption and thickness swelling than those made from wood flour. In absence of MAPP, bark content had no significant effect on flexural modulus of the composites but flexural strength and un-notched Izod impact strength significantly decreased with increase in bark content. The use of MAPP had no significant effect in increasing the mechanical properties. A comparison indicates that in absence of MAPP, bark flour-PP composites exhibited higher mechanical properties than wood flour-PP composite but in presence of MAPP, results were quite inversed.}, keywords = {bark flour-polypropylene composite,compatibilizer,physical properties,MECHANICAL PROPERTIES}, title_fa = {بررسی اثر درصد پوست راش بر خواص فیزیکی و مکانیکی مواد مرکب آرد پوست-پلی‌پروپیلن}, abstract_fa = {در این تحقیق خواص فیزیکی و مکانیکی مواد مرکب حاصل از آرد پوست و پلی‌پروپیلن مورد مطالعه قرار گرفت و با خواص مواد مرکب آردچوب-پلی‌پروپیلن مقایسه شد. مقدار پرکننده آرد پوست در سه سطح 40، 50 و60 درصد در نظر گرفته شد و با عدم حضور و حضور2 درصد سازگارگننده MAPP با پلی‌پروپیلن در دستگاه اکسترودر دو مارپیچ مخلوط و مواد مرکب ساخته شد. مواد مرکب آردچوب-پلی‌پروپیلن نیز با نسبت 60 به 40 آرد چوب به پلی‌پروپیلن ساخته شد. نتایج نشان دادند با افزودن درصد آرد پوست جذب آب و واکشیدگی ضخامت کوتاه‌مدت مواد مرکب کاهش می‌یابد و مصرف سازگارکننده موجب کاهش جزیی این خواص می‌گردد. امّا با عدم حضور سازگارکننده افزایش درصد پوست در مواد مرکب پوست پلی‌پروپیلن مدول‌الاستیسیته تغییر معنی‌داری را نشان نمی‌دهد، ولی مقاومت‌خمشی و مقاومت به ضربه به ‌طور معنی‌داری کاهش می‌یابد. استفاده از سازگارکننده باعث افزایش کمی در خواص مذکور می‌شود. مقایسه خواص مکانیکی مواد مرکب آرد پوست پلی‌پروپیلن و مواد مرکب، آرد چوب پلی‌پروپیلن نشان داد که با عدم حضور سازگارکننده، خواص مکانیکی مواد مرکب حاوی آرد پوست بیشتر از مواد مرکب دارای آرد چوب می‌باشد، در حالی که با حضور سازگارکننده نتایج بعکس می‌باشد.  }, keywords_fa = {مواد مرکب آرد پوست- پلی‌پروپیلن,سازگارکننده,خواص فیزیکی,خواص مکانیکی}, url = {https://ijwpr.areeo.ac.ir/article_117256.html}, eprint = {https://ijwpr.areeo.ac.ir/article_117256_861d9f20dd2685b1fe11924d735edaeb.pdf} }