@article { author = {Golbabaei, Fardad and Nourbakhsh, Amir and Fakhryan roghani, Abbas and Falahdoost, Shahrokh}, title = {VARIATION IN MECHANICAL PROPERTIES OF BEECH (FAGUS ORIENTALIS LIPSKY) WOOD GROWN ON SANGDEH FORESTS (MAZANDERAN), IRAN}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {19}, number = {شماره 2}, pages = {175-192}, year = {2004}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2004.117567}, abstract = {Beech (Fagus orientalis Lipsky L.) is one of the most important broadleaf species in the Caspian Forests of Iran. The wood of Beech is highly appreciated in domestic wood industries especially furniture industry. In this study which is a part of the extensive surveying project of the main wood engineering properties of Iranian woods, the natural variations of strength and related properties of three trees of about 75 years old from Sangdeh Forests in Mazandran province were investigated.The properties were determined from tests on small clear specimens in the green and dry conditions following the ASTM Standard. The mechanical and physical properties studied include: stress at elastic limits, modulus of rupture, modulus of elasticity and modulus of elasticity in static bending; shear parallel to grain, maximum crushing strength, fiber stress at proportional limit and modulus of elasticity in compression parallel to grain; compression perpendicular to grain and specific gravity.The results of statistical analysis showed that the mechanical strength of the wood was found to be affected by percentage of moisture conten of wood specimens, height of sample tree and to some extend by geographical; direction.}, keywords = {beech,PHYSICAL AND MECHANICAL PROPERTIES,SPECIFIC GRAVITY}, title_fa = {تغییرات ویژگیهای مهندسی چوب گونه راش در جنگل های سنگده (مازندران)}, abstract_fa = {راش ایران (Fagus orientalis Lipsky) یکی از مهمترین پهن برگان تجارتی جنگلهای خزری است. چوب این گونه به دلیل کیفیت بسیار خوبی که دارد پیوسته مورد توجه صنایع چوب کشور به ویژه صنعت مبلسازی می باشد. در این تحقیق ویژگیهای مهندسی چوب راش جنگلهای سنگده ساری با رعایت آیین نامه D143-52 استاندارد ASTM در دو حالت سبز (تر) و خشک اندازه گیری شده و برای تعیین تاثیر عوامل رطوبت، جهات جغرافیایی و ارتفاع تنه، داده های حاصل از آزمایشات مختلف با استفاده از روش آماری فاکتوریل در قالب طرح بلوکهای کاملا تصادفی مورد تجزیه و تحلیل قرار گرفته و با استفاده از گروه بندی دانکن گروه بندی شدند.نتایج تجزیه و تحلیل آماری نشان داد که ویژگیهای مکانیکی راش تحت تاثیر ارتفاع رویشگاه، رطوبت نمونه های آزمونی، ارتفاعات مختلف درختان نمونه و به نسبت خیلی کمتر جهات جغرافیایی و تنه درخت بوده است. همچنین مقایسه مقاومتهای بدست آمده با نتایج حاصل از آزمایشهای مکانیکی صورت گرفته در مورد راش منطقه ویسر مازندران و اسالم گیلان نشان داد که راش منطقه سنگده از مقاومتهای کمتری برخوردار است.}, keywords_fa = {راش ایرانی (شرقی) .Fagus orientails L,دانسیته,جرم ویژه نسبی,ویژگیهای فیزیکی و مکانیکی}, url = {https://ijwpr.areeo.ac.ir/article_117567.html}, eprint = {https://ijwpr.areeo.ac.ir/article_117567_439e0b8a942e7badd89d534a9c973e5a.pdf} }