@article { author = {barzan, ali and resalati, hossein and ghasemian, ali and saraeyan, ahmadreza and asadpour, ghasem}, title = {The Effect of Different Coating Formulation on the Physical, Mechanical, and Optical Properties of Papers Made from bleached CMP}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {34}, number = {2}, pages = {193-204}, year = {2019}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2019.125600.1531}, abstract = {In this study, the effect of pigment composition on the properties of paper prepared from CMP pulp was studied. There for 3 different pigment combinations (100% calcium carbonate (GCC), 70% calcium carbonate and 30% kaolin clay (70GCC30Clay) and 70% calcium carbonate and 25% gritty and 5% titanium dioxide (70GCC25Clay5TiO2)) were made with anionic starch, latex and dispersersant and Used for coating. Physical properties included (surface roughness of the paper, Ash content and Apparent density) And the optical properties included (brightness, absorption and diffusion coefficient) and paper resistance characteristics including tensile strength, bursting resistance, tear strength based on standard TAPPI standardized measurements and Using factorial design, analysis of variance was performed and the mean of paper properties was compared with Duncan's test. The purpose of this research is to achieve the best combination for coating the paper with the improvement of physical and optical properties and maintaining resistance properties. By adding clay and dioxide titanium to calcium carbonate, the roughness of the paper surface decreased The highest roughness of the surface of the paper in the diet was observed for the control paper and the lowest was seen in the treatment of 70GCC30Clay surface. Also, the highest degree of brightness is related to 70GCC25Clay5TiO2 treatment. The highest index of tensile strength and burst strength index was related to gypsum treated paper (GCC) and also the highest tear strength index for treated paper at level 2 (70GCC30Clay).}, keywords = {CMP pulp,Coating,calendering and mechanical properties}, title_fa = {تأثیر فرمولاسیون‌های مختلف پوشش‌دهی بر ویژگی‌های فیزیکی، مکانیکی و نوری کاغذ حاصل از خمیر کاغذ رنگبری شده CMP}, abstract_fa = {در این تحقیق، تأثیر ترکیب رنگدانه بر ویژگی‌های کاغذ حاصل از خمیرکاغذ CMP مورد بررسی قرار گرفت. برای پوشش‌دهی این کاغذها3 ترکیب مختلف رنگدانه (100درصد کلسیم‌کربنات (GCC)، 70درصد کلسیم‌کربنات و 30درصد خاک‌چینی (70GCC30Clay) و 70درصد کلسیم‌کربنات و 25درصد خاک‌چینی و 5 درصد دی‌اکسیدتیتانیوم (70GCC25Clay5TiO2)) به همراه نشاسته آنیونی، لاتکس و عوامل پراکنده سازساخته و پس از پوشش‌دهی، اتوزنی انجام شد. خواص فیزیکی شامل (زبری سطح رویی کاغذ، درصد خاکستر و دانسیته ظاهری) و خواص نوری شامل (درجه روشنی، ضریب جذب و پخش نور) و ویژگی‌های مقاومتی کاغذ شامل مقاومت کششی، مقاومت به ترکیدن، مقاومت به پارگی بر اساس آئین‌نامه‌های استاندارد TAPPI اندازه‌گیری و با استفاده از طرح فاکتوریل، تجزیه‌واریانس انجام و میانگین ویژگی‌های کاغذ حاصل با آزمون دانکن مورد مقایسه قرار گرفتند. تحلیل آماری نتایج نشان داد که با افزودن خاک رس و دی‌اکسید‌تیتانیوم به کربنات کلسیم آسیاب شده، زبری سطح رویی کاغذ کاهش یافت. بیشترین زبری سطح رویی کاغذ درتیمار مربوط به کاغذ شاهد و کمترین آن مربوط به سطح 70GCC30Clay مشاهده‌گردید. همچنین بیشترین درجه روشنی مربوط به تیمار 70GCC25Clay5TiO2 می‌باشد. بیشترین شاخص مقاومت به کشش و شاخص مقاومت به ترکیدن مربوط به کاغذ تیمار‌شده در سطح 1 (GCC) و همچنین بیشترین شاخص مقاومت در برابر پاره شدن مربوط به کاغذ تیمارشده در سطح 2 (70GCC30Clay) بوده است}, keywords_fa = {خمیرکاغذCMP,پوشش‌دهی,اتوزنی و ویژگی‌های مکانیکی}, url = {https://ijwpr.areeo.ac.ir/article_118939.html}, eprint = {https://ijwpr.areeo.ac.ir/article_118939_c305d719d0b5db583394711c936b1697.pdf} }