ORIGINAL_ARTICLE
تاثیر سیانواتیلاسیون خمیرکاغذ و نانوالیاف سلولزی بر خواص فیزیکی کاغذهای عایق ترانسفورماتور
خواص کاغذهای عایق الکتریکی ترانسفورماتور متأثر از فرایند اصلاح شیمیایی انجام شده بر روی الیاف است. در این تحقیق تأثیر سیانواتیلاسیون خمیرکاغذ و افزودن نانوالیاف سلولزی سیانواتیلدار شده بر خواص دیالکتریک شامل ظرفیت، تلفات دیالکتریک، مقاومت عایقی، ولتاژ شکست و همچنین مقاومت به کشش دو نوع کاغذ دستساز تهیهشده از خمیرکاغذ رنگبرینشده الیاف بلند و ترکیبی از آن با خمیرکاغذ سودای باگاس با نسبت 1:1 پس از آغشتهسازی با روغن معدنی ارزیابی شده است. برای این منظور سیانواتیلاسیون نانوالیاف سلولزی و خمیرکاغذ توسط پیوندزنی با آکریلونیتریل بهترتیب در دمای C˚40 و دمای اتاق در شرایط قلیایی انجام شد. پسازآن میزان نیتروژن نمونههای سیانواتیلدار شده با روش کجدال تعیین و درجه استخلاف آنها محاسبه شد. نتایج نشان داد که سیانواتیلاسیون خمیرکاغذ و افزودن نانوالیاف سلولزی اصلاحشده موجب کاهش ظرفیت و مقاومت به کشش کاغذهای عایق شد. همچنین مشاهده شد که اصلاح شیمیایی تأثیر اندکی بر تلفات دیالکتریک داشته ولی مقاومت عایقی و ولتاژ شکست کاغذها را افزایش داده است.
https://ijwpr.areeo.ac.ir/article_105604_a66c7aa0f491423ff43b8a309235774e.pdf
2016-03-20
1
13
10.22092/ijwpr.2015.105604
سیانواتیلاسیون
کاغذ عایق
نانوالیاف سلولزی
خواص دیالکتریک
محمد
آزادفلاح
adfallah@ut.ac.ir
1
استادیار، گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران، کرج
LEAD_AUTHOR
حمید
خدابنده لو
h_khodabandeh@ut.ac.ir
2
کارشناس ارشد صنایع خمیر و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران، کرج
AUTHOR
امیر عباس
شایگانی اکمل
shayegani@ut.ac.ir
3
استادیار، گروه مهندسی برق، دانشکده مهندسی برق و کامپیوتر، دانشگاه تهران
AUTHOR
- Casey, J.P. 1980. Pulp and Paper, Chemistry and Chemical Technology.Volume 3(3rd edition). John Wiley and Sons. New York, 236p.
1
- Enayati, A.A., and Abdolkhani, A., 2007. Dielectric Properties of Wood and Wood-Based Materials, University of Tehran Press. 222p.
2
- Ferrito, S.J., and Stegehuis, R.L., 2001. High temperature reinforced cellulose iinsulation for use in electrical applications. Transmission and Distribution Conference and Exposition, IEEE/PES, 2001, Vol. 2, 684-687.
3
- Hassan, M., 2002. Dielectric properties of cyanoethylated bagasse compasites. Polymer Plastics Technology and Engineering. 41(3): 589-600.
4
- Jayamani, E., Hamdan, S., Rahman, M.R., and Bakri, M.K.B. 2014. Comparative study of dielectric properties of hybrid natural fiber composites. Procedia Engineering, 97: 536-544.
5
- Joseph, S., and Thomas, S. 2008. Electrical properties of banana fiber-reinforced phenol formaldehyde composites. Journal of Aplied Polymer Science, 109(1): 256-263.
6
- Kajanto, I., and Kosonen, M. 2012. The Potential use of micro-and nano-fibrillated cellulose as a reinforcing element in paper. J-FOR- Journal of Science & Technology for Forest Products and Processes, 2(6): 42-48.
7
- Majidnia, M., 2013. Distribution transformers, Dayere Danesh Publication, 302p.
8
- Mark, R., and Borch, J., 2002. Handbook of Physical Testing of Paper. Marcel Dekker Press. Volume 1: 564p.
9
- Moradian Gilan, K., Azadfallah, M., Shaygani Akmal, A.A., and Abdolkhani, A., 2013. Dielectric properties of oil impregnated kraft and soda pulps. Iranian Journal of Wood and Paper Science Research. 28 (2):329-340.
10
- Nada, A., and Hassan, H., 2000. Thermal behavior of cellulose and some cellulose derivatives. Polymer Degradation and Stability, 67(1):111-115.
11
- Nakayama, E., and Azuma, J. I., 1998. Substituent distribution of cyanoethyl cellulose. Cellulose, 5(3):175-185.
12
- Prevost, T., 2005. Degradation of cellulose insulation in liquid-filled power transformers. EHV-Weidmann Industries Inc. W-ACTI, 2005 4th Annual Technical Conference.
13
- Sefain, M.Z., Naoum, M.M., Fadl, M.H., and El-Wakil N.A., 1994. Thermal behaviour of cyanoethylated cellulose. Theoretica Chimica Acta, 231:257-265.
14
- Wang, Y., Tian, M., and Yang, T., 2012. Influence of cyanoethylated chemical modification on transformer insulation paper: molecular modeling study. International Conference on High Voltage Engineering and Application, Shanghai, China, 17-20 September, 119-122.
15
- Yılmaza, N.D., 2013. Effect of chemical extraction parameters on corn husk fibres characteristics. Indian Journal of Fibre & Textile Research, 38: 29-34.
16
ORIGINAL_ARTICLE
تاثیر دیاکسید سیلسیوم بر دوام طبیعی و ریختشناسی چندسازه چوب پلاستیک در برابر قارچ رنگینکمان (Trametes Versicolor)
این تحقیق با هدف بررسی تأثیر افزودن ذرات سیلیس بر دوام طبیعی و ریختشناسی چندسازه چوب پلاستیک در برابر قارچ رنگینکمان (Trametes Versicolor) انجام شد. آرد چوب با نسبت وزنی 60 درصد با پلیپروپیلن به همراه phc 2 انیدرید مالئیک پلیپروپیلنی مخلوط گردید. نانو و میکرو سیلیس نیز با نسبتهای وزنی 0، 1، 3 و phc 5 بهعنوان پرکننده مورد استفاده قرار گرفتند. فرایند اختلاط در داخل دستگاه مخلوطکن داخلی انجام شد و نمونههای آزمونی با استفاده از دستگاه تزریق ساخته شدند. نمونههای آزمونی به مدتهای 8، 12 و 16 هفته در مجاورت قارچ رنگینکمان با دمای 25 درجه سانتیگراد و رطوبت نسبی 75 درصد مطابق با استاندارد BS 838:1961 قرار گرفتند. سپس کاهش جرم، جذب آب بلندمدت و ضریب انتشار رطوبت بر روی نمونهها انجام شد. برای اطمینان از تشکیل پیوند هیدروژنی بین سیلیس و آرد چوب از طیفسنجی مادون قرمز (FTIR) و برای ریختشناسی چندسازهها از میکروسکوپ الکترونی پویشی (SEM) استفاده گردید. نتایج نشان داد که با افزایش زمان مجاورت نمونهها در محیط قارچ، کاهش جرم، جذب آب بلندمدت و ضریب انتشار رطوبت در چوب پلاستیک افزایش یافت، اما با افزایش سیلیس، از شدت پوسیدگی نمونهها کاسته شد. تأثیر نانو ذرات سیلیس بر دوام طبیعی چندسازه چوب پلاستیک بیشتر از تأثیر میکرو ذرات سیلیس بود. نتایج طیفسنجی مادون قرمز حکایت از ایجاد پیوند هیدروژنی بین آرد چوب و سیلیس داشت. نتایج میکروسکوپ الکترونی پویشی نیز نشان داد که با افزایش مجاورت نمونهها با قارچ ترکهای ریز و درشتی در چندسازه ایجاد گردید اما با افزایش سیلیس از میزان این ترکها کاسته شد.
https://ijwpr.areeo.ac.ir/article_105613_516c51c5fab7b01e5da5826ea1d43dc9.pdf
2016-03-20
14
29
10.22092/ijwpr.2015.105613
دوام طبیعی
ضریب انتشار رطوبت
قارچ رنگین کمان
نانو و میکرو سیلیس
کاهش وزن
سعید
اسمعیلی مقدم
saeed.am17358@gmail.com
1
باشگاه پژوهشگران جوان و نخبگان، دانشگاه آزاد اسلامی، واحد چالوس، چالوس، ایران.
LEAD_AUTHOR
افسانه
شهرکی
shahreki.afsaneh68@yahoo.com
2
دانشآموخته کارشناسی ارشد فرآوردههای چندسازه چوب، دانشگاه زابل
AUTHOR
فاطمه
دهدست
fatima.dehdast61@gmail.com
3
دانش آموخته کارشناسی ارشد فرآورده های چندسازه چوب دانشگاه زابل
AUTHOR
سمانه
پور کرمی
pourkarami64@yahoo.com
4
دانش آموخته کارشناسی ارشد حفاظت و اصلاح چوب دانشگاه علوم کشاورزی و منابع طبیعی گرگان
AUTHOR
- American Society for Testing and Materials. ASTM. 2011. Standard guide for evaluating mechanical and physical properties of wood-plastic composite products. Annual book of ASTM standards. Philadelphia. ASTM D7031-04.
1
- American Society for Testing and Materials. ASTM. 2012. Standard practice for injection molding test specimens of thermoplastic molding and materials. ASTM D3641-12. Annual book of ASTM standards.
2
- American Society for Testing and Materials. ASTM. 2013. Standard practice for conditioning plastics for testing. ASTM D618-13. For testing. ASTM D618-99. Annual book of ASTM standards. Philadelphia.
3
- Ammala, A., Hill, A., Meakin, P., Pas, S. and Turney, T., 2002. Degradation studies of polyolefins incorporating transparent nanoparticulate zinc oxide UV stabilizers. Journal of Nanoparticle Research, 4: 167-174.
4
- BehzadiShahrebabk, A., Madhoushi, M. and MastriFarahani, M.R., 2014. Investigation the physical properties and decay resistance of medium density fiberboard sanding dust/high density polyethylene/nanoclay composite. Iranian Journal of Wood and Paper Science Research, 29(2): 287- 298.
5
- British Standard 838. 1961. Method of test for toxicity of wood preservatives to fungi. Philadelphia, PA., USA.
6
- Chae, D.W. and Kim, B.C., 2007. Effects of introducing silica particles on the rheological properties and crystallization behavior of poly (ethylene terephthalate). J. Mater. Sci, 42(4): 1238–1244.
7
- Chow, C.P.L., Xing, X.S. and Li, R.K.Y., 2007. Moisture absorption studies of sisal fiber reinforced polypropylene composites. Journal of Composites Part B, 67: 306-313.
8
- Enoki, A., Tanaka, H. and Fuse, G., 1988. Physical and chemical characteristics of glycopeptide from wood decay fungi. Holzforchung,42: 85-93.
9
- Espert, A., Vilaplana, F. and Karlsson S., 2004. Comparison of Water Absorption in Natural Cellulosic Fibers from Wood and one-year Crops in Polypropylene Composites and its Influence on their Mechanical Properties. Journal of Composites Part A, 35: 1267-1276.
10
- Farahani, M.R. and Banikarim, F., 2013. Effect of Nano-Zinc Oxide on Decay Resistance of Wood-Plastic Composite. Journal of Bioresources, 8(4): 5715-5720.
11
- Farahani, M.R. and Saffarzadeh, F., 2011. Decay resistance of a commercial pistachio twig-plastic composite. International Research Group on Wood Protection, IRG/WP 11-10745.
12
- Farhadyar, N., Rahimi, A. and Ershad-Langroudi, A., 2005. Synthesis and Characterization of Organic-Inorganic Hybrid Nano- Composite based on Tetramethoxysilane and Epoxy Resin by Sol-Gel Method. Iran. J. Polym. Sci. Technol,18: 19-27.
13
- Ghorbani Kokandeh, M., Doosthoseini, K., Karimi, A.N. and Mohebby, B., 2012. Biological resistance of acetylated particleboards exposed to white (Trametes versicolor) and brown (Coniophora puteana) rot fungi. Journal of Forest and Wood Products (JFWP). Iranian Journal of Natural Resources, 65(1): 47-56.
14
- Hosseini Hashemi, K., Modirzare, M., Safdari, V. and Kord, B., 2011. Decay resistance, hardness, water absorption, and thickness swelling of a bagasse fiber/plastic composite. Bioresources, 6(3): 3289-3299.
15
- Ibach R.E., Clemons, C.M. and Schumann, R.L., 2007. Wood-plastic composites with reduced moisture: Effects of chemical modification on durability in the laboratory and field. 9th International Conference on Wood and Biofibre Plastic Composites,Madison, Wisconsin, USA.
16
- Ismaeilimoghadam, S., Shamsian, M., Bayat Kashkoli, A. and Kord, B., 2015. Evaluation of effect of Nano SiO2 on the physical, mechanical and morphological properties of hybrid Nano composite from polypropylene-wood flour. Iranian Journal of Wood and Paper Science Research, 30(2): 266-277.
17
- Kahru, A. and Dubourguier, H.C., 2010. From ecotoxicology to nanoecotoxicology. Toxicology, 269: 105-119.
18
- Kazemi, S., Kiaeifar, A., Tajvidi, M. and Hamidinia, E., 2007. Water Absorption Behavior and Thickness Swelling Rate of Composites from Sawdust and Recycled Plastics. Journal of Reinforced Plastic and Composites, 26(3): 341-348.
19
- Kord, B. and Taghizadeh Haratbar, D., 2014. Influence of fiber surface treatment on the physical and mechanical properties of wood flour-reinforced polypropylene bionanocomposites. Journal of Thermoplastic Composite Materials, DOI: 10.1177/0892705714551592.
20
- Kord, B., Jari, E., Najafi, A. and Tazakorrezaie, V., 2014. Effect of Nano clay on the Decay Resistance and Physico-Mechanical Properties of Natural Fiber Reinforced Plastic Composites against White-rot Fungi (Trametes Versicolor). Journal of Thermoplastic Composite Materials, DOI: 0892705712465302.
21
- Lamy, R., Zunic, E., Steding, R. and Aamodt, A., 2011. Preparation of Stable Slurries of Spherically Shaped Silica for Coatings. Prog. Org. Coat, 72: 96-101.
22
- Liu, X.Q., Wang, Y., Yang, W., Liu, Z.Y., Luo, Y., Xie, B.H. and Yang, M.B., 2012. Control of morphology and properties by the selective distribution of Nano-silica particles with different surface characteristics in PA6/ABS blends. Journal of Materials Science, 47(11): 4620-4631.
23
- Lomeli-Ramirez, M.G., Ochoa-Ruiz, H.G., Fuentes-Talavera, F.G., Garcia-Enriquez, S., Cerpa-Gallegos, M.A. and Silva-Guzman, J.A., 2009. Evaluation of accelerated decay of wood plastic composites by Xylophages fungi. International Bio deterioration & Biodegradation 63(8): 1030-1035.
24
- Mankowski, M. and Morrell, J.J., 2000. Patterns of fungal attack in wood-plastic composite following exposure in a soil block test. Wood and Fiber Science, 32(3): 340-345.
25
- Mohebby, B., 2003. Biological attack of acetylated wood. Ph.D. Thesis, Gottingen University, Gottingen, p. 147.
26
- Morrell, J.J., Stark, N.M., Pandleton, D.E. and McDonald, A.G., 2006. Durability of wood-plastic composite. Wood Design Focus, 16(3): 7-10.
27
- Najafi, A. and Khademi-Eslam, H., 2011. Lignocellulosic filler/recycled HDPE composites: effect of filler type on physical and flexural properties. Bioresources.com, 6(3): 2411-2424.
28
- Najafi, A., 2010. Effect of Immersion Temperature on Long-term Water Uptake Behavior of HDPE/Wood sawdust Composite. Iranian Journal of Wood and Paper Industries, 1(1): 37-44.
29
- Pandleton, D.E., Hoffard, T., Adcock, T., Woodward, B. and Wolcott, M.P., 2002. Durability of an Extruded HDPE/Wood Composite. Forest Products Journal, 52: 6-15.
30
- Parvinzadeh Gashti, M., Moradian, S., Rashidi, A. and Yazdanshenas, M.E., 2012. Effect of Nanosilica Type on Properties of Polyethylene Terephthalane/Silica Nanocomposite. Iranian Journal of Polymer Science and Technology, 25(3): 203-219.
31
- Pendelton, D. and Hoffard, T., 2002. Durability of an extruded HDPE/wood composite. Forest product Journal, 52(6): 21-27.
32
- Quercia, G., Spiesz, P., Husken, G. and Brouwers, J., 2012. Effects of Amorphous Nano silica addition on mechanical and durability performance of scc mixture. International congress on durability of concrete, 8-12.
33
- Rabiee, A., Ershad Langroudi, A., Jamshidi, H. and Gilani, M., 2013. Preparation and Characterization of Hybrid Nanocomposite of Polyacrylamide/Silica-Nanoparticles. Iranian Journal of Polymer Science and Technology, 25(5): 405-414.
34
- Rasouli, D., Faezipour, M. and Masteri Farahani, M.R., 2015. Effects of nano zinc oxide and micro zinc borate on the durability of wood flour/HDPE composite. J. of Wood & Forest Science and Technology, 21(4): 131-145.
35
- Roohani, M., Habibi,Y., Belgacem, N.M., Ebrahim, G., Karimi, A.N. and Dufresne, A., 2008. Cellulose whiskers reinforced polyvinyl alcohol copolymers nanocomposites. European Polymer Journal, 44(8): 2489–2498.
36
- Roohani, M., Kord, B., Motie, N. and Sharari, M., 2014. Biiodegradattiion behaviiors off cellllullose nanocrysttalls --PVA nanocomposiittes, Iranian Journal of Wood and Paper Industries, 5(2): 1-13.
37
- Sain, M., Suhara, P., Law, S. and Bloullooux, A., 2005. Interface modification and mechanical properties of natural fiber-polyolefin composite products. Journal of Reinforced Plastics and Composites, 24(2): 121-130.
38
- Tian, X., Zhang, X., Liu, W., Zheng, J., Ruan, C. and Cui, P., 2006. Preparation and properties of poly (ethylene terephthalate)–silica Nano composites. Journal of Macromolecular Science, 45(4): 507-513.
39
- Varhey, S.A. and Lakes, P.E., 2002. Fungal resistance of wood fiber/thermoplastic composites, enhancing the durability of lumber and engineered wood product. Orlando, Florida, USA.
40
- Xanthos, M. 2005. Functional fillers for plantics. Wiley, Weinheim.
41
- Yao, X., Tian, X., Zhang, X., Zheng, K., Zheng, J., Wang, R., Kang, S. and Cui, P., 2009. Preparation and Characterization of Poly (butylenes terephthalate)/Silica Nanocomposites. Polym. Eng. Sci,49: 799–807.
42
- Zabihzadeh, S.M., Hosseini Hashemi, S.K., Mehregan Nikoo, H. and Sepidehdam, S.M.J., 2009. Influence of fungal decay on physico-mechanical properties of a commercial extruded bagasse/PP composite. Journal of Reinforced Plastic and Composite, DOI: 0974275184205302.
43
- Zhang, X., Tian, X., Zheng, J., Yao, X., Liu, W., Cui, P. and Li, Y., 2008. Relationship between microstructure and tensile properties of PET/Silica Nano composite fibers. Journal of Macromolecular Science, 47(2): 368–377.
44
ORIGINAL_ARTICLE
تأثیر استفاده از آرد نخل خرما در ساخت کامپوزیت چوب-پلاستیک بر پایه پلی پروپیلن
در این تحقیق، تأثیر مقدار پرکننده و ماده جفت کننده MAPP بر ویژگیهای فیزیکی و مکانیکی کامپوزیت پلیپروپیلن تقویت شده شده با آرد حاصل از ضایعات ناشی از هرس سالیانه برگ نخل خرما (رقم شاهانی) مورد مطالعه قرار گرفت. بدین منظور استفاده از سه سطح 30، 40 و 50 درصد آرد نخل خرما و دو سطح 4 و 6 درصد MAPP به عنوان عوامل متغییر در نظر گرفته شد. سپس خواص فیزیکی و مکانیکی نمونههای آزمونی شامل واکشیدگی ضخامت بعد از 2 و 24 ساعت غوطه وری در آب، مقاومت و مدول کششی، مقاومت و مدول خمشی و مقاومت به ضربه اندازهگیری شد. نتایج حاصل نشان داد که با افزایش آرد نخل خرما مقاومت خمشی، مقاومت کششی و مقاومت به ضربه کاهش و در مقابل واکشیدگی ضخامت، مدول خمشی، مدول کششی افزایش یافتهاند. همچنین با بررسی اثر ماده جفت کننده مشخص گردید که با افزودن MAPP واکشیدگی ضخامت، مقاومت و مدول الاستیسیته کششی و خمشی کامپوزیت حاصل بهبود یافته است. این بدان معنی است که همراه با افزایش مصرف آرد نخل خرما، افزودن عامل جفت کننده منجر به بهبود کیفیت سطح مشترک شده و تغییرات قابل ملاحظهای را خصوصا در پایداری ابعادی و مدول الاستیسیته حاصل کرده است.
https://ijwpr.areeo.ac.ir/article_105771_875e8e51b9365eea973c05b722dbdc7d.pdf
2016-03-20
30
39
10.22092/ijwpr.2015.105771
کامپوزیت
پلیپروپیلن
آرد نخل خرما
جفت کننده
مدول الاستیسیته
علیرضا
بی اذیت
alirezabiazyat@gmai.com
1
کارشناس ارشد گروه علوم و صنایع چوب و کاغذ، دانشکده کشاورزی و منابع طبیعی، دانشگاه گنبدکاووس
AUTHOR
لعیا
جمالی راد
loyajamalirad@yahoo.com
2
استادیار، گروه علوم و صنایع چوب و کاغذ، دانشکده کشاورزی و منابع طبیعی، دانشگاه گنبدکاووس
LEAD_AUTHOR
هدایت الله
امینیان
hedaminian@yahoo.com
3
استادیار، گروه علوم و صنایع چوب و کاغذ، دانشکده کشاورزی و منابع طبیعی، دانشگاه گنبدکاووس
AUTHOR
سحاب
حجازی
shedjazi@ut.ac.ir
4
دانشیار، گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
AUTHOR
-Andersons J., Sparninš E. and Joffe R., 2006. Stiffness and strength of flax fiber/polymermatrix composites. Polymer Composites, 27(2): 221-229.
1
-Angelov, I., Wiedmer, S., Evstatiev, M., Friedrich, K. and Mennig, G., 2007.Pultrusion of a flax/polypropylene yarn. Compos Part A, 38(5): 1431–1438.
2
-Bledzki, A.K. and Gassan, J., 1999. Composites reinforced with cellulose based fibers. Polymer Science, 24 (1): 221-274.
3
-Borysiak, S., Paukszta, D. and Helwig, M., 2006. Flammability of wood polypropylene composites. PolymDegradStabil, 91: 3339–3343.
4
-Bos, H.L., Mussig, J. and vandenOever, M.J.A., 2006. Mechanical properties of short-flax-fibre reinforced compounds. Compos Part A, 37: 1591–1604.
5
-Ganster, J., Fink, H.P. and Pinnow, M., 2006. High-tenacity man-made cellulose fibre reinforced thermoplastics—injection moulding compounds with polypropylene and alternative matrices. Compos Part A, 37: 1796–1804.
6
-Gholizadeh, M., Jamalirad, L., Aminian, H. and Hedjazi, S., 2015. Investigation on Mechanical Properties of polypropylene composite reinforced with tobacco stalk. Journal of Forest and Wood Products, 68(2): 261-272.
7
-Grinia, M.N., Andrea, C.D.R., Carlos, A.P.L., Carlos, G., Olga, Z.H., Bronislaw, P., 2010. Preparation and characterization of ethanol-treated silk fibroin dense membranes for biomaterials application using waste silk fibers as raw material. BioresTechnol, 101(21): 8446–8451.
8
-Joshi, S.V., Drzal, L.T., Mohanty, A.K. and Arora, S., 2004. Are natural fiber composites environmentally superior to glass fiber reinforced composites. Composites: Part A, 35: 371-376.
9
-Kargarfard, A., 2013. The Infuence of coupling agent and the content of fibers on tensile strength and physical properties of cotton fiber stem/recycled polypropylene composites. Iranian Journal of Wood and Paper Industries, 3(2):131-140.
10
-Khademi, R., Behseresht, R., and Farrar, N., 2006. Suitablemethods for plantresidue managing in Iran’s Palm grove. Bushehr Province Agricultural andNatural Resource Research Center. 23 p.
11
-KhademiEslam, H., Yousefnia, Z., Ghasemi, E., and Talaeipoor, T., 2013. Investigating the mechanical properties of wood flour/ polypropylene/ nanoclay composite. Iranian Journal of Wood and Paper Science Research, 28(1): 153-168.
12
-Khan, M.M.R., Masuhiro, T., Yasuo, G., Hideaki, M., Giuliano, F. and Hideki, S., 2010. Physical properties and dyeability of silk fibers degummed with citric acid. BioresTechnol, 101(21): 8439–8445.
13
-Kim, S., Moonb, J., Kim, C.H., and Sikha, G., 2008. Mechanical properties of polypropylene /naturalfiber composites: Comparison of wood fiber and cotton fiber. Polymer Testing, 27:801–806.
14
-Maladas, D., and Kokta, B. V. 1990. Effect of extreme conditions on the mechanical propertise of the wood fiber- polystyrene composites. LiSawdust as reinforcing filler. Polymer-PlasticsTechnology and Engineering, 29 (1-2): 119-165.
15
-Mousavi, T., Rafiei, A. and Yoosefpour, M., 2014. Nutritional Value and Health Benefits of Dates According to Islamic Recourses and Traditional Medicine. Journal of MazandaranUniv Med Sci, 24(117): 247-265.
16
-Mwaikambo, L.Y., Martuscelli, E. and Avella, M., 2000. Kapok/cotton fabric–polypropylene composites. Polym Test, 19: 905–918.
17
-Oksman, K., Skrifvars, M. and Selin, J., 2003. Natural fiber as reinforcement in polylactic acid composites. Composite Science and Technology, 63(2): 113-120.
18
-Rosa, S.M.L., Santosb, E.F., Ferreiraa, C.A., and Nachtigallb, S.M.B., 2009. Studies on the properties of rice-husk-filled-PP composites–effect of maleated PP. Materials Research, 12(3): 333-338.
19
-Rowell, M.R., Lange, S.E., and Jacobson, R.E., 2000. Weathering performance of plant-fiber thermoplastic composites. Molecular Crystals and Liquid Crystals, 353: 85-94.
20
-Rozman, H.D., Tay, G.S., Kumar, R.N., Abusamah, A., Ismail, H., MohdIshak, Z.A., 2001. Polypropylene-oil palm empty fruit bunch-glass fibre hybrid composites: A preliminary study on the flexural and tensile properties. EurPolym J,37: 1283-1291.
21
-Seung-Hwan L, Siqun, W., George, M.P. and Haitao, X., 2007. Evaluation of interphase properties in a cellulose fiber-reinforced polypropylene composite by nanoindentation and finite element analysis. Compos Part A, 38(6): 1517–1524.
22
-Shinichi, S., Yong, C. and Isao, F., 2006. Lightweight laminate composites made from kenaf and polypropylene fibres. Polym Test, 25: 142–148.
23
-Shubhra, Q., Alam, A., and Quaiyyum, M.A., 2011. Mechanical properties of polypropylene composites. Journal of Thermoplastic Composite Material, 26(3):362-391.
24
-Srikanth, P., Shaoqin, G., Eric, O., Liqiang, Y. and Roger, M.R., 2009.Polylactide-recycled wood fiber composites. J App PolymSci, 111: 37–47.
25
-Stark, N., 1997. Effect of species and particle size on properties of wood-flour filled polypropylene composites. USDA Forest Products Laboratory, 35(2): 167-174.
26
-Stark, N.M., Rowlands, R.E., 2003. Effects of wood fiber characteristicson mechanical properties of wood/polypropylene composites. Wood andFiberScience, 35(2):167-174.
27
-Zampaloni, M., Pourboghrat, F., Yankovich, S.A., Rodgers, B.N., Moore, J., Drzal, L.T., 2007. Kenaf natural fiber reinforced polypropylene composites: A discussion on manufacturing problems and solutions. Compos Part A, 38(6): 1569–1580.
28
ORIGINAL_ARTICLE
تاثیر اسید بوریک بر روی خواص فیزیکی و مکانیکی تخته خرده چوبهای ساخته شده با رزین اوره فرمالدهید (UF)
هدف از انجام این پژوهش بررسی مقاومت در برابر آب تخته خرده چوبهای ساخته شده با رزین اوره فرمالدهید (UF) به کمک افزودن اسید بوریک به این رزین بود. در این بررسی افزودنی مورد نظر به عنوان عامل متغیر در چهار سطح 1، 2، 3 و 4 درصد نسبت به وزن خشک چسب استفاده شد. پس از تهیه فراوردههای مرکب، مقاومتهای فیزیکی و مکانیکی بر اساس استاندارد ASTM, D1013-04 مورد بررسی قرار گرفت. نتایج نشان داد که استفاده از این افزودنی موجب افزایش مقاومت در برابر آب و واکشیدگی ضخامت 2 و 24 ساعت بعد از غوطهوری در آب، در تخته خرده چوبهای ساخته شده با این رزین شد. همچنین استفاده از این افزودنی مقاومت چسبندگی 24 ساعت غوطهوری در آب نسبت به نمونه شاهد افزایش داد، اما در حالت خشک نسبت به نمونه شاهد باعث کاهش شد، هرچند این کاهش پایینتر از حد استاندارد نبود. با افزایش سطوح اسید بوریک تا 2 درصد مقاومت خمشی نمونههای ساخته شده نسبت به نمونه شاهد افزایش، و بعد از این سطح کاهش یافت. احتمال میرود این کاهش به علت تاثیر اسید بوریک بر روی الیاف سلولزی یا فیبر سلولزی باشد در اثر گرما باعث تخریب این الیاف و کم شدن مقاومت خمشی میشود. همچنین با افزایش سطوح افزودنی ذکر شده تا سطح 4 درصد مدول الاستیسیته تخته-های ساخته شده نسبت به نمونه شاهد افزایش یافت.
https://ijwpr.areeo.ac.ir/article_102672_b252aa25a6530a718d8be6e90b4c4b5c.pdf
2016-03-20
40
47
10.22092/ijwpr.2015.102672
اوره فرمالدهید
اسید بوریک
جذب آب
واکشیدگی ضخامت
چسبندگی داخلی
مصطفی
پوزش
mostafapoozesh67@gmail.com
1
دانشجوی کارشناسی ارشد فرآوردههای چند سازه چوبی دانشگاه زابل
AUTHOR
حمیدرضا
منصوری
hamidreza.mansouri@gmail.com
2
استادیار گروه علوم و صنایع چوب و کاغذ دانشگاه زابل
LEAD_AUTHOR
بابک
نصرتی
nosrati.babak@uoz.ac.ir
3
استادیار، گروه علوم و صنایع چوب و کاغذ، دانشگاه زابل
AUTHOR
علیرضا
سام زاده
4
عضو هیات علمی استادیار، گروه شیمی دانشگاه زابل
AUTHOR
- Alma, M. H., Kalaycioglu, H., Bektas, I. and Tutus, A., 2005. Properties of cotton carpel-based particleboards. Industrial Crops and Products. 22(2): p 141-149.
1
- Colakoglu, G., Colak, S., Aydin, I., Yildiz, U.C. and Yildiz, S., 2003. Effect of boric acid treatment on mechanical properties of laminated beech veneer lumber. Silva Fennica. 37(4): 505–510.
2
- Doosthoseini, K., 2007. Wood Composite Materials. University of Tehran. 716p.
3
- Han, G., Umemura, K., Wong, E., Zhang, M. and Kawai. S. h., 2001. Effect of silane coupling agent level and extraction treatment on the properties of UF-bonded reed and wheat straw particleboards. Journal Wood Science. 47(5): p 18-23.
4
- Latibari, A.J., 2007. Science and Technology of Adhesion for Lignocellulosic Substances. Ialamic Azad University Karadj Branch. 348p.
5
- Mansouri, H.R. and Pizzi, A., 2006. Urea–Formaldehyde–Propionaldehyde Physical Gelation Resins for Improved Swelling in Water. Journal of Applied Polymer Science, 102 (6): p 5131–5136.
6
- Mansouri, H.R., Pizzi, A. and Leban, J. M., 2006. Improved water resistance of UF adhesives for plywood by small pMDI additions. Holz als Roh- und Werkstoff, 64 (3): p 218–220.
7
- Pandey, S. N., and Gurjar, R.M., 1987. Effects of flame retardants on the properties of particle boards prepared from cottonseed hulls. Biological Wastes. 19(3): 197-203.
8
- Pedieu, R., Koubaa, A., Riedl, B., Wang, X.M. and Deng, J., 2011. Fire-retardant properties of wood particleboards treated with boric acid. Journal Wood Prod. 70: 191-197.
9
- Pizzi, A., 1997. Wattlebase adhesive for exterior grade particleboards. Forest Products Journal. 28(12): p 1-5
10
- Roumeli, E., Papadopoulou, E., Pavlidou, E., Vourlias, G., Bikiaris, D., Paraskevopoulos, K. M. and Chrissafis, K., 2012. Synthesis, characterization and thermal analysis of urea formaldehyde/nanoSiO2 resins. Thermochimica Acta. 527: 33-39.
11
- Tsuyumoto, I., Oshio, T. and Katayama, K., 2007. Preparation of Highly Concentrated Aqueous Solution of Sodium Borate. Inorganic Chemistry Communications. 10 (1): 20–22.
12
- Zenat, A. N., Nassar, M. A. and Meligy, M.G., 2011. Effect of Addition of Boric Acid and Borax on Fire-Retardant and Mechanical Properties of Urea Formaldehyde Saw Dust Composites. International Journal of Carbohydrate Chemistry. 10(1): 1-6.
13
ORIGINAL_ARTICLE
تأثیر استفاده از خمیر مرکب زدایی شدهی مخلوط کاغذهای باطلهی اداری(MOW) بر ویژگیهای خمیر کاغذ مکانیکی پروکسید قلیایی(APMP) ساقهی پنبه
این تحقیق با هدف بررسی تأثیر استفاده از خمیرکاغذ مرکبزدایی شدهی مخلوط کاغذهای باطلهی اداری (MOW) بر ویژگیهای خمیرکاغذAPMP ساقهی پنبه انجام گرفت. به این منظور خمیرکاغذهای APMP با استفاده از عوامل کیلیتساز نظیر سیلیکات سدیم و DTPA (نمونه شاهد) و بدون استفاده از این ترکیبات ازخردههای ساقه پنبهی بدون پوست در دو مرحله با نسبت مایع خمیرسازی به ماده اولیه 1 : 6، زمان 20 دقیقه و درجه حرارت C°70 در مرحله اول، زمان 60 دقیقه و درجه حرارت C° 75 در مرحله دوم تهیه شدند. علاوه بر این خمیرکاغذهای حاصل از مخلوط کاغذهای باطله اداری که با روش متداول شناورسازی مرکبزدایی شدند، تهیه شده و تا رسیدن به درجه روانی حدودml CSF 300 پالایش شدند. از خمیرکاغذ-های شاهد، بدون استفاده از عوامل کیلیتساز، خمیرکاغذ مرکبزدایی شدهی مخلوط کاغذهای باطلهی اداری و همچنین اختلاط 10% و 20% آن با APMP شاهد کاغذهای دستساز ساخته شد. ویژگیهای فیزیکی و مکانیکی کاغذها بر اساس استانداردهای تاپی تعیین گردید. بیشترین مقادیر دانسیته، درجه روشنی و ویژگیهای مقاومتی مربوط به خمیرکاغذ مرکبزدایی شدهی MOW و کمترین مقادیر مربوط به خمیرکاغذ APMP بدون عوامل کیلیتساز بود و از بین کاغذهای اختلاطی نیز خمیرکاغذAPMP حاوی 20% خمیر مرکبزدایی شده MOW بیشترین مقادیر دانسیته، درجه روشنی، شاخص مقاومت به ترکیدن و پاره شدن را داشت.
https://ijwpr.areeo.ac.ir/article_105608_76ca5fb209d2a7cb4e0861d7737dd018.pdf
2016-03-20
48
57
10.22092/ijwpr.2015.105608
خمیرکاغذAPMP
ساقه پنبه
خمیر مرکبزدایی شده MOW
دانسیته
درجه روشنی
شاخص مقاومت به ترکیدن
مهرنوش
توکلی
tavakolimehrnoosh@yahoo.com
1
کارشناس ارشد خمیرکاغذ دانشگاه علوم کشاورزی و منابع طبیعی گرگان
LEAD_AUTHOR
احمدرضا
سرائیان
saraeyan@yahoo.com
2
دانشیار، علوم و تکنولوژی خمیر و کاغذ، دانشگاه علوم کشاورزی و منابع طبیعی گرگان
AUTHOR
حسین
رسالتی
hnresalati@yahoo.com
3
استاد راهنما/ دانشگاه علوم کشاورزی و منابع طبیعی گرگان
AUTHOR
علی
قاسمیان
ali.ghasemian1960@yahoo.com
4
استاد راهنما/ دانشگاه علوم کشاورزی و منابع طبیعی گرگان
AUTHOR
- Ali, M., Byrd, M., and Jameel, H. 2002. Chemimechanical Pulping of Cotton Stalks. Presented At the TAPPI Pulping Conference Prceedings.
1
-Amiri, SH,. 2005. Investigation of Produce Paper by Soda From Cotton Stalk. Iranian Journal of Wood and Paper Science Research, 20(2): 185-206.
2
- Ferguson, L. 2000 . Properties that a low DIP to be used a hardwood substitute. TAPPI papermakers conference and trade fair , Canada , Book No 2 , pp : 611-662.
3
- Genco, J. M. 1994. Bleaching Mixed office waste to high brightness. TAPPI Journal , 77(3) : 253-259.
4
- Kopania, E., Stupinska, H., and Palenik, J. 2008. Susceptibility Deinked Waste Paper Mass to Proxide Bleaching, Institute of Biopolymers and Chemical fibers. www.epnoe.eu
5
- Meyer, K. 1999. Deinking mixed office waste and the use in printing and writing grades. pp : 197-211.
6
- Resalati, H. 2007. The Effects of APMP Process Variables on Aspen Pulp Yields and Properties, 2007 International Mechanical Pulping Conference. www.TAPPI.org
7
- Saraeyan, A,. 2003. Investigation On Possibility of High yield Bleached Pulp Production Using Alkaline Proxide Mechanical Pulping (APMP) From Khorasan Wheat Straw. PH.D thesis. Tehran University. pp: 257.
8
-Sarreyan, A., Kamrani, s. 2007. Estimating Amount of Agricultural Residuals Useable in Wood and Paper Industries (case study: Golestan province). Monthly scientific, agricultural and rural environment, 50(5): 27-32.
9
- Shubchari, H., 2006. Investigation On Possibility of High yield Bleached Pulp Production Using Alkaline Proxide Mechanical Pulping (APMP) From Cotton Stalk, Master thesis, Agricultural Sciences and Natural Resources of Gorgan University.pp: 71.
10
-Sorush s,. 2002. Effect of Soda Pulp from Cotton Stalks on the Quality of Recycling Paper from Waste Paper Packaging, Master thesis, Agricultural Sciences and Natural Resources of Gorgan University.pp: 73.
11
- Vidya, S. 1999. Effect of recycled fiber on strength properties of paper. IPPTA , pp: 13-17.
12
- Woodward, T. 1997. Behavior of recycled pulps during papermaking: Tissue runability short course , TAPPI Journal .pp : 57-111.
13
- Xu, E. C. 1999. A new concept in Alkaline Peroxide Mechanical Pulping, international mechanical pulping conference proceeding, Rouston, texas.
14
- Yongqiang, Zhirun., Heitner, Cyril., and Mc Garry, P. 2002. Evaluation of the APMP process for mature and juvenile loblolly pine, TAPPI Journal, 5 (7): 24-31.
15
ORIGINAL_ARTICLE
بررسی تاثیرزمان ذخیرهسازی بر خواص رنگ و ترکیبات شیمیایی تخته خرده حاصل از باگاس
این تحقیق، با هدف بررسی تاثیر ذخیرهسازی بر خواص رنگ و ترکیبات شیمیایی تخته خرده حاصل ازباگاسانجام شد. برای این منظور از باگاس ذخیره شده کارخانه نئوپان کارون واقع در استان خوزستان درسه سطح (بالا،وسط وپائین) و باگاس ذخیرهنشده تهیه گردید. سپس،ترکیبات شیمیایی نمونهها براساس دستورالعمل TAPPI، ویژگی بیومتری (ضریبلاغری) با استفاده از روش فرانکلین و تغییرات رنگ آنها اندازهگیری شد. همچنین شناسایی نوع میکروارگانسیمهای موجوددرنمونههای باگاس دخیره شده در سه سطح انجام گرفت، نتایج با نمونهها شاهد مقایسه شد. نتایج نشان داد، که مقدارلیگنین دربین نمونههای باگاس ذخیرهشده درسه سطح تفاوت داشت،اماتفاوتی معنیداری درمیزان سلولزومواداستخراجی آنهامشاهده نشد. همچنین در ضریب لاغری نمونهها(ذخیره شده و دخیره نشد)تفاوتی ملاحظه نشد. میزان تغییررنگ درتختههای ساختهشده ازباگاس ذخیرهشدهبیشترازنمونههایذخیرهنشدهبود. بررسیهای شناسایی نوع میکروارکانسیمهای موجوددرنمونههای باگاس ذخیرهشده نشان دادکه بیشترین آنهاباکترهای ومخمرهابودند. نتایج ازمایشات انجام شده نشان داد که مدت ذخیره سازی می تواند به طور چشمگیری رنگ و خواص فیزیکی باگاسهای ذخیره شده را مورد تغییر قرار دهد.
https://ijwpr.areeo.ac.ir/article_105610_e83559cd3d6187e25af3af4ac51f7e01.pdf
2016-03-20
58
66
10.22092/ijwpr.2015.105610
باگاس
ذخیرهسازی
تغییرات رنگ
ترکیبات شیمیایی
مهدی
جنوبی
mehdi.jonoobi@ut.ac.ir
1
استادیار، گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران،
LEAD_AUTHOR
شوبو
صالحپور
shsalehpur@yahoo.com
2
دانشجوی دکتری، گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
AUTHOR
زهره
عرازنیا
araznia@yahoo.com
3
دانشآموخته کارشناسی ارشد، گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
AUTHOR
یحیی
همزه
hamzeh@ut.ac.ir
4
استاد، گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
AUTHOR
-Atchison, J.E., 1977. Making Bagasse Available, XVI Congress of ISSCT.54-66
1
- Atchison, J., 1971, Modern metohod of purchasing handling, storage and preservation of bagasse. TAPPI N on wood plant fiber pulping progress report. 23
2
- Atcheson, J., 1987. Nonwoody plant pulping, chapter 2, pulp and paper Manufacture. 3:22-70
3
-Banerjee, R. and Pandey, A., 2002. Bio-industrial application of sugarcane bagasse. a technology perspective, Int. Sugar Journal.1:3–7.
4
-Franklin, C.L., 1964. A rapid method of softening wood for microime sectioning. Batone rouge,134pp.
5
-Galvez, L., 1994. The Development of Sugar Cane By Products in Cuba. 1st International ISSCT Workshop on Sugar Cane By-Products. 23-38.
6
-Kirchhoff, V.W.J.H., 2009.As queimadas da cana. Sao José dos Campos: Transtec Editorial. IN: Sustainability: use of sugarcane bagasse and bamboo leaves to produce sealing boards, 1991, POMS 20th Annual Conference Orlando, Florida U.S.A. May 1 to May 4,
7
-Kristensen, J.B., Thygesen, L.G., Felby, C., Jørgensen, H. and Elder, T., 2008. Biotechnology and
8
Biofuels, 1, 1–9.
9
-Lois, J., l979. Experimental Evaluation of Bagasse Stored in Wet Bales in the Bagasse Boards Factory PROCUBA, 43 rd Congress of Cuban Association of Sugar Technicians ATAC, Havana, Cuba (inspanish).
10
-Lois, J., 2009. Sugar cane and co-products. Proceedings of XXXII ATAM Convention, Cordoba, Veracruz, August.
11
-Lois, J., SuBrez, R.y. and Francesena, A., 1981. Evaluaci6n experimental del bagazo almacenado enpacas h6medas en la fibrica de tableros "PRO-CUBA". Trabajo presentado a1 XLIII Congreso dela ATAC, Palacio de las Convenciones, Ciudad de La Habana, Cuba.
12
-Lois, J., 1982. El almacenamiento de bagazo-para su utilizacidn industrial en Cuba. Thesis to CSc. Higher School VsLD. Zvolen, Czecho-Slovakia.
13
-Lois, J., 1982.Storage of Bagasse for its Industrial Utilization in Cuba, Ph.D. Thesis University of Zvolen, Slovaquia
14
-Lois, J., 1994. Bagasse Storage for Industrial Use, International Seminar on Commercial Energy Generation in the Cane Agroindustry GEPLACEA, ASAZGUA and GTZ, Guatemala City, Guatemala, April.
15
-Lacey, J., 2008. Moulding of sugar cane bagasse. Annals of applied biology. 76(1): 63–76.
16
- Luz, S. M., Goncalves, A. P., Delarco, JR. 2007. Mechanical be havior and microstructural analysis of sugare cane bagasse fibers reinforced polypropylene composites, composites part: applied science and manufacturing, 38, 1455
17
- Misook,.K., Giovanna, A., Donal, F.D., 2010. Compositional Changes in Sugarcane Bagasse on LowTemperature, Long-term Diluted Ammonia Treatment. Appl Biochem Biotechnol.161:34-40
18
-Morgan, R., 1974. Wet bulk storage of bagasse. Porc.XVth congress ISSCT(south Africa). Hayne and Gibson Ltd. Durban.1793-1820
19
-Narendra, R and Yang, Y., 2005. Biofibers from agricultural byproducts for industrial applications. Trends in Biotechnology. 23(1):.22-27
20
-Schmidt, O. and Walter, K., 1978. Sucession and Activity of Microorganisms in Stored Bagasse, European J. Appl. Microbiology and Biotechnology. 69-77
21
-Tabandeh, F., Roaiaie, M., Bambai, B., Molaie, M. and Ghasemi, F., 2008. Isolation and identification of the bagasse degradingMicroorganisms. Iranian Journal of Plant Biology. 22(3): 442-451.
22
ORIGINAL_ARTICLE
بررسی ویژگیهای کششی و ثبات ابعادی چندسازه پلیپروپیلن/الیاف کاه گندم/ لجن کارخانه کاغذ
در این مطالعه ویژگیهایی کششی و فیزیکی چندسازه پلیپروپیلن (بهعنوان ماتریس) و الیاف کاه گندم/ لجن کارخانه کاغذ (بهعنوان پرکننده) مورد بررسی قرار گرفته است. برای ساخت چندسازه از ترکیبات مختلف الیاف کاه گندم/لجن کارخانه کاغذ (40/0، 30/10، 20/20، 10/30 و 0/40) استفاده شد. همچنین برای سازگاری بهتر بین دو فاز از انیدریدمالئیک پیوند خورده با پلی پروپیلن به میزان 3% بهعنوان اتصال دهنده استفاده شد. برای اختلاط مواد از اکسترودر دو مارپیچ ناهمسانگرد و برای تهیه نمونههای استاندارد از روش قالبگیری تزریقی استفاده شد. بررسی مدولالاستسیته کششی نشان که با افزودن هر دو نوع پرکننده افزایش قابل توجهای در سفتی چندسازه نسبت به PP خالص مشاهده شده در حالیکه بالاترین مدول الاستسیته کششی مربوط با چندسازه با درصد بالاتر لجن کارخانه کاغذ بوده است. مقاومت کششی چندسازه با افزودن 40% الیاف کاه گندم کاهش یافت اما پس از آن با افزودن بالاتر لجن کارخانه کاغذ مقاومت کششی چندسازه افزایش معنیداری را نشان داده است. با افزودن الیاف کاه گندم به ماتریس PP و دارا بودن خاصیت آبدوستی این مواد بالاترین میزان جذب آب و واکشیدگی ضخامت مشاهده شد. در حالیکه با افزودن لجن کارخانه کاغذ با میزان مواد لیگنوسلولزی کمتر، پایینترین میزان جذب آب و واکشیدگی ضخامت مشاهده شد. هم-چنین با افزودن اتصال دهنده و برقراری اتصال بهتر بین دو فاز کاهش قابل توجهای در جذب آب و واکشیدگی ضخامت مشاهده شد. کلمات کلیدی: الیاف کاه گندم، لجن کارخانه کاغذ، ویژگیهای کششی، ثبات ابعادی، چندسازه
https://ijwpr.areeo.ac.ir/article_102674_4effbb9bccda9cf623c6e4b65a26fb80.pdf
2016-03-20
67
77
10.22092/ijwpr.2015.102674
الیاف کاه گندم
لجن کارخانه کاغذ
ویژگیهای کششی
ثبات ابعادی
چندسازه
حبیب الله
خادمی اسلام
hkhademieslam@gmail.com
1
دانشیار گروه علوم و صنایع چوب و کاغذ، واحد علوم و تحقیقات تهران، دانشگاه آزاد اسلامی
LEAD_AUTHOR
مهدی
کلاگر
mehdi.kalagar@gmail.com
2
دکتری صنایع چوب و کاغذ، کارشناس جنگل، شرکت جنگل شفارود، گیلان
AUTHOR
-Arbelaiz, A., Cantero, G., Fernandez, B., and Mondragon, I., 2005.Flax fiber surface modifications: Effects on fiber physico mechanical and flax/polypropylene interface properties. Polymer Composite, 26: 324-332
1
-Ashori, A., and Nourbakhsh, A. 2009. Mechanical Behavior of Agro-Residue-Reinforced Polypropylene Composites. Journal of Applied Polymer Science, 111:2616–2620
2
-Correa, A., Razzino, A., andHage, E., 2007. Role of Maleated Coupling Agents on the Interface Adhesion of Polypropylene--Wood Composites.Journal of Thermoplastic Composite Materials,20:323–339
3
-Geng, Y., Li, K., Simonsen, E., 2004. Effects of a new compatibilizer system on the flexural properties of wood–polyethylene composites. Journal of Applied Polymer Science, 91: 3667-3672
4
-Girones, J., Pardini, G., Vilaseca, F., Pelach, A., and Mutje, P., 2010. Recycling of Paper Mill Sludge as Filler/Reinforcement in Polypropylene Composites. J Polym Environ, 18: 407–412
5
-Hamzeh, Y., Ashori, A. and Mirzaei, A., 2011. Effects of Waste Paper Sludge on the Physico-Mechanical Properties of High Density Polyethylene/Wood Flour Composites. J Polym Environ, 19: 120–124.
6
- Hristov, N., Krumova, M., Vasileva, S., Michler, H., 2004. Modified Polypropylene Wood Flour Composites. II.Fracture, Deformation, and Mechanical Properties. Journal Applied Polymer Science, 92:1286-1292
7
- Ismail, H., Shuhelmy, S., and Edyham, R., 2002. The effect of silane coupling agent on curing characteristics and mechanical properties of bamboo fibre filled natural rubber composites. Journal Article European Polymer Journal, 38: 39-47
8
- Jang, J., and Lee, E., 2007. The effect of flame retardants on the flammability and mechanical properties of paper-sludge/phenolic composite.Polymer Testing, 20: 7-13
9
--Lee, B., Kim, H. and park, H., 2002. Performance of Paper Sludge/Polypropylene fiber/ Lignocelluloses fiber composites. Journal of Indian Engineer Chemistry 8 (3): 50-56
10
Lee, B., Kim, H. and park, H., 2002. Performance of Paper Sludge/Polypropylene fiber/ Lignocelluloses fiber composites, J. Ind. Eng. Chem, 8 (3): 50-56
11
-Marzban, E., Talaeipour, M., Hemmasi, A.H., Ghasemi, E., and Kalagar, M., 2013. The effect of paper mill recycling sludge application on the mechanical properties of composite based on recycled polymers. Iranian Journal Of Wood and Paper Science Research, 28: 509-521
12
-MarzbanMoridani, E. andTalaeipourM., 2014. A study on physical properties of composites produced using recycled polymer filled with paper mill sludge composites. Iranian Journal of Wood and Paper Science Research, 29: 443-451
13
-Qiao, X., Zhang, Y., and Zhang Y., 2003. Ink-eliminated paper sludge flour as filler for polypropylene.Polymers & Polymer Composites, 11: 312-326
14
-Reddy, N., and Yang, Y., 2007. Preparation and characterization of long natural cellulose fibers from wheat straw. Journal of Agriculture and Food Chemistry, 55: 8570–8575
15
-Rozman, D., Lai, Y., Ismail, H., and Mohd, A., 2000. The effect of coupling agents on the mechanical and physical properties of oil palm empty fruit bunch–polypropylene composites.PolymInt, 49:1273-1278
16
- Salmah, H., Ismail, H., and Bakar, A., 2005. The effect of paper sludge content and size on properties of PP/EPDM composites. Journal of Reinforced Plastic and Composites Polymer, 24: 147-156
17
-Salmah, H., Ismail, H., and Bakar,, A., 2005. A Comparative Study on the Effects of Paper Sludge and Kaolin on Properties of Polypropylene/Ethylene Propylene DieneTerpolymer Composites. Iranian Polymer Journal, 14: 705-713
18
-Yadav, P., Nema, A., Varghese, S., and Nema, S.K., 1999. News paper reinforced plastic composite laminates: mechanical and water uptake characteristics. Polymer Engendering and Science, 39: 1550-1557
19
-Yuan, X., Zhang Y., and Zhang, X., 1999. Maleated polypropylene as a coupling agent for polypropylene-waste newspaper flour composites, Journal of Applied Polymer Science, 71: 333-341
20
-Zhang, S., Zhang, Y., Bousmina, M., Sain, M., and Choi, P., 2007. Effects of raw fiber materials, fiber content, and coupling agent content on selected properties of polyethylene/wood fiber composites. PolymEngSci2007, 47: 1678-1687
21
-Zhang, Y., Zhang, S., and Choi, P., 2008. Effects of wood fiber content and coupling agent content on tensile properties of wood fiber polyethylene composites. HolzRohWerkst, 66:267-274
22
-Zou, Y., Huda, S., and Yiqi, Y., 2010. Lightweight composites from long wheat straw and polypropylene web.Bioresource Technology, 101:2026–2033
23
ORIGINAL_ARTICLE
بررسی ویژگیهای چندسازههای زیستی خمیرکاغذ- پلی پروپیلن از باگاس خام و پیش استخراج شده با آب داغ
در این پژوهش ویژگیهای فیزیکی و مکانیکی چندسازههای پلیپروپیلن تقویتشده با خمیرکاغذهای شیمیایی سولفیت قلیایی- آنتراکینون، سودا- آنتراکینون، مونواتانول آمین- آنتراکینون و خمیر کاغذ شیمیایی- مکانیکی حاصله از باگاس خام و پیش استخراج شده با آب داغ با استفاده از عامل جفتکننده مالئیک انیدرید- پلی پروپیلن به میزان 3 درصد و نسبت ماده زمینه پلیپروپیلن به ماده تقویتکننده خمیرکاغذ 50/50 درصد در نظر گرفته شد. نتایج نشان داد که نوع فرایند اثر معنیداری بر تمامی ویژگیهای مکانیکی و فیزیکیهای چندسازهها دارد. به طور کلی چندسازههای حاوی خمیر کاغذهای شیمیایی مقاومت و پایداری ابعادی بیشتر و جذب آب کمتری نسبت به نمونه حاوی خمیرکاغذهای مکانیکی دارا بودند.چندسازه های حاوی الیاف تیمار شده با فرآیندهای سولفیت قلیائی آنتراکینون و سودا بیشترین مقاومت های مکانیکی را دارا می باشند. چندسازههای ساخته شده از الیافی که همی سلولز آنها استخراج شده و با فرآیندهای شیمیائی تیمار شده اند بیشترین مقاومت و پایداری ابعادی را داشتند. در کل نتایج حاکی از بهبود ویژگیهای مقاومتی و فیزیکی چندسازههای خمیرکاغذ-پلاستیک در مقایسه با چندسازههای آرد ماده لیگنوسلولزی- پلاستیک میباشد.
https://ijwpr.areeo.ac.ir/article_105607_0c228219fd4c9f42aec1f6fb0f9eab6d.pdf
2016-03-20
78
91
10.22092/ijwpr.2015.105607
چندسازه
خمیرکاغذ
پلی پروپیلن
ویژگیهای فیزیکی و مکانیکی
علیرضا
سوخته سرائی
sukhtesaraee@ut.ac.ir
1
دکترای صنایع خمیر و کاغذ، دانشکده منابع طبیعی دانشگاه تهران
AUTHOR
سحاب
حجازی
shedjazi@ut.ac.ir
2
دانشیار، گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی دانشگاه تهران
LEAD_AUTHOR
لعیا
جمالی راد
loyajamalirad@yahoo.com
3
استادیار، گروه علوم و صنایع چوب و کاغذ، دانشکده کشاورزی و منابع طبیعی، دانشگاه گنبد کاووس
AUTHOR
محمد
احمدی
mohammad@ut.ac.ir
4
استادیار گروه صنایع چوب و کاغذ،دانشگاه محقق اردبیلی
AUTHOR
سید بهنام
حسینی
behnamhosseini@ut.ac.ir
5
دانشآموخته کارشناسی ارشد مهندسی خمیر و کاغذ، دانشکده منابع طبیعی دانشگاه تهران
AUTHOR
- Aurrekoetxea, J., Sarrionandia, M. and G´omez, X., 2008. Effects of microstructure on wear behaviour of wood reinforced polypropylene composite. Wear Journal, 265(5-6):606–611.
1
- Beg, M.D.H. and Pickering, K.L., 2008. Mechanical performance of kraft fibre reinforced polypropylene composites: influence of fibre length, fibre beating and hygrothermal ageing. Composites: Part A, 39(11): 1748–1755.
2
- Bledzki, A.K. and Jaszkiewicz, A., 2010. Mechanical performance of biocomposites based on PLA and PHBV reinforced with natural fibres – A comparative study to PP. Composites Science and Technology, 70 (12):1687–1696.
3
- Boopthi, L., Sampath, P.S. and Mylsamy, K., 2012. Influence of fiber length the wear behavior of borassus fiber reinforced epoxy composited. International Journal of Engineering Science and Technology (IJEST), 9(4): 4119-4129.
4
- Chow, C.P.L., Xing, X.S. and Li, R., 2007. Moisture absorption studies of sisal fibre reinforced polypropylene composites. Composites Science and Technology, 67(2):306–313.
5
- Elyasi, A., Doosthoseini, K. and Layeghi, M., 2011. Effect of nano-clay on apllied properties of porous wood-plastic composites. M.Sc. Thesis, Departemant of wood and paper science and industries, Faculty of of Natural Resources, University of Tehran, Tehran, 87.
6
- F.Moghadam, P. and Mohebby, B., 2012. Water absorption and dimensional stability of polypropylene/acetylated wood fiber. Journal of Wood & Forest Science and Technology, 18(4): 29-43.
7
- F.Talavera, F.J., S.Guzman, J.A, Richter, H.G., S.Duenas, R. and Quirate, J.R., 2007. Effect of production variables on bending properties, water absorption and thickness swelling of bagasse/plastic composite boards. Industrial Crops and Products, 26(1):1-7.
8
- Fatahi, M., Hedjazi, S., Jamalirad, L. and Tajvidi, M .,2012. Evaluating of physical and mechanical properties of polyethylene composites reinforced with rice straw chemical and mechanical pulp. M.Sc. Thesis, Departemant of wood and paper science and Industries, Faculty of of Natural Resources, University of Tehran, Tehran, 96.
9
- Froozanfar, R., Sukhtesarie, A. and Noroozi, E., 2011. The managment of leavings in cellulosic industries (case study). The 5th National Conference & Exhibition on Environmental Engineering, Nov. 19-23, Tehran.
10
- Hosseinaei, O., Wang, S., Enayati. A.A. and G.Rials, T., 2012. Effects of hemicellulose extraction on properties of wood flour and wood–plastic composites. Composites Journal: Part A, 43 (2) 686–694.
11
- Ichazo, MN., Albano, C. and Gonzalez J., 2000. Behavior of polyolefine belends with acetylated sisal fibers. Poymer International, 49: 1409-1416.
12
- Kord, B., 2009. Improvement of practical properties of wood polymer composite with nanoclay particles. Journal of Materials Engineering, 1(4): 369-377.
13
- Lai, Y. and Sapuan, S.M., 2005. Mechanical and properties of coconut Coir Fiber-Reinforced polypropylene Composites. Polymer-Plastics Technology and Engineering, 44(2):619-632.
14
- Lee Y, H., Sain, M., Kuboki, T. and Park, C.B., 2009. Extrusion foaming of nano-clay filled wood fiber composites for automotive applications. Journal of Material and Manufacturing, 1(1):641-647.
15
- Li x., Tabi, L. and Panigrahi, S., 2007. Chemical treatment of natural fiber for use natural fiber-reinforced composites: A review. Journal of Polymers and the Environment, 15 (2): 25-33.
16
- Saiful Islam, M.D., Hamdan, S., Jusoh, B., R.Rahman, M. and Ahmed, A.S., 2012. The effect of alkali pretreatment on mechanical and morphological properties of tropical wood polymer composites. Materials and Design, 33 (2012) 419–424.
17
- Sobczaka, L., W.Lang, R. and Haidera, A., 2012. Polypropylene composites with natural fibers and wood – General mechanical property profiles. Composites Science and Technology, 72(5): 550–557.
18
- Sreekala, M.S., Kumaran, M.G. and Thomas, S., 2002. Water sorption in oil palm fiber reinforced phenol formaldehyde composites. Composites Part A. Applied Science and Manufacturing, 33(6): 763–777.
19
- Sukhtesaraie, A., Hedjai, S., Jamalirad, L., 2013. Evaluation of physical and mechanical properties of pulp- propylene nanobiocomposites from none extracted and pre-extracted Bagasse with hot water. M.Sc. Thesis, Departemant of Wood and Paper Science and Industries, Faculty of of Natural Resources, University of Tehran, Tehran, 101.
20
- Tavasoli, A., Talaeipour, M., Hemmasi, A., Khademieslam, H., Ghasemi, I. and Masoomi, Z., 2011. Development of fine-celled wood fiber/pvc composite foams using multi-walled carbon nano tubes. World Applied Sciences Journal, 13 (2): 269-276.
21
- Zahedi, M., Tabarsa, T., Madhoushi, M. and Shakeri, A.R., 2013. Effect of nanoclay (Montmorillonite) on the physical-mechanical properties of polypropylene / wood flour composites. Journal of Wood and Forest Science and Technology, 20 (3): 95-110.
22
ORIGINAL_ARTICLE
بررسی امکان ساخت نانوچندسازه ساخته شده از پباکس و نانوسلولز
در این تحقیق یک نوع جدید از نانو چند سازه الاستومر ترموپلاستیک تقویت شده با فیبرهای نانو سلولز گزارش می شود. هدف از این مطالعه ابتدا بررسی برهمکنش و پخش نانو سلولز در داخل ماتریکس پباکس بوده است. این کوپلیمر (پباکس)، ترموپلاستیک الاستومر پلی اتر بلاک آمید می باشد که از منابع تجدید شونده بدست می آید و خصوصیت آب دوستی (گروه های عاملی) آن منجر به برهمکنش آن با نانو سلولز می گردد. برهمکنش و اثر تقویت کنندگی نانو سلولز در سه سطح 1، 3 و 5 درصد به وسیله میکروسکوپ الکترونی پویشی، طیف سنجی مادون قرمز و آزمون های مکانیکی (شامل مدول یانگ، افزایش طول تا نقطه شکست و مقاومت به ضربه) مورد بررسی قرار گرفت. همه نتایج بدست آمده دلالت بر اثر مناسب فیبرهای نانو سلولز بر برهمکنش قوی و تماس نزدیک با بخش پلی آمید ماتریکس پباکس دارد که موجب افزایش خواص مکانیکی نانو چند سازه گردیده است. مدول یانگ و مقاومت به ضربه نانو چندسازه، افزایش چشمگیری پیدا کرد.
https://ijwpr.areeo.ac.ir/article_105606_bc8b07d28a80fb5c2fb38eb04e80bdbd.pdf
2016-03-20
92
104
10.22092/ijwpr.2015.105606
ترموپلاستیک الاستومر
فیبر نانوسلولز
نانوچندسازه
SEM
FTIR
حسن
ضیائی طبری
hassanziaei64@gmail.com
1
دانشجوی دکتری دانشگاه ازاد اسلامی.واحد علوم و تحقیقات
AUTHOR
حبیب الله
خادمی اسلام
hkhademieslam@gmail.com
2
هیات علمی دانشگاه آزاد واحد علوم و تحقیقات تهران
LEAD_AUTHOR
بهزاد
بازیار
behzad1351@yahoo.com
3
دانشیار، دانشگاه آزاد اسلامی، واحد علوم و تحقیقات، گروه صنایع چوب و کاغذ، تهران
AUTHOR
امیرهومن
حمصی
h_hemmasi@yahoo.com
4
استادیار، دانشگاه آزاد اسلامی، واحد علوم و تحقیقات، گروه صنایع چوب و کاغذ، تهران
AUTHOR
-Anglès, MN.,Dufresne, A., 2000. Plasticized starch/tunicin whiskers nanocomposites. Structural analysis. Macromolecules 33: 8344-8353.
1
-Brinchi, L., Cotana, F., Fortunati, E., Kenny, J.M.,2013.Production of nanocrystalline cellulose from lignocellulosic biomass: Technology and applications. Carbohydrate Polymers 94: 154– 169.
2
-Capadona, J,R., Shanmuganathan. K., Triftschuh, S., Seidel, S., Rowan, S,J., Weder, C., 2009. Polymer nanocomposites with nanowhiskers isolated from microcrystalline cellulose.Biomacromolecules 10:712.
3
-Capadona, J,R., Van Den Berg, O., Capadona, L,A., Schroeter, M., Rowan, S,J., Tyler, D,J.,2005.High-strength, healable, supramolecular polymer nanocomposites. National Nanotechnology 2007;2:765.
4
-Cheriana, B,M., Leoa, A,L., Souzab, S, F., Costab, L,M,M., Olyveirab, G,B., Kottaisamyc, M., Nagarajand, E,R., Thomase, S., 2011. Cellulose nanocomposites with Cellulose nanocomposites with nanofibres isolated from pineapple leaf fibers for medical applications. Carbohydrate Polymers. 86(4): 1790–1798.
5
-Dogan, N., McHugh, T.,2007. Effects of microcrystalline cellulose on functional properties of hydroxy propyl methyl cellulose microcomposite films. Journal of Food Science 72:E016–22.
6
-Fakirov S.2005. Handbook of condensation thermoplastic elastomer. Wiley, USA, 643p.
7
-Hubbe, MA., Rojas, O,J., Lucia, L,A., Sain, M., 2008.Cellulosic nanocomposites: a review. Bioresources 3:929–80.
8
-Jiang, B., Liu, C., Zhang, C., Wang, B., Wang, Z.,2007. The effect of non-symmetric distribution of fiber orientation and aspect ratio on elastic properties of composites. Composites Part B Engineering 38:24–34.
9
-Kvien, I., Oksman, K., 2007. Orientation of cellulose nanowhiskers in polyvinyl alcohol. Applied Physics A 87:641–3.
10
-Kumar, A., Negi, Y.S., Choudhary, V., Bhardwaj, N.K., 2014. Characterization of Cellulose Nanocrystals Produced by Acid-Hydrolysis from Sugarcane Bagasse as Agro-Waste. Journal of Materials Physics and Chemistry. 2: 1-8.
11
-Lee, S,U., Jang Mohan, D., Doh, G-H., Lee, S., Ok Han, S., 2009. Nanocellulose reinforced PVA composite films: Effects of acid treatment and filler loading, Fibers and Polymers 10: 77-82.
12
-Malmstrom, E., Carlmark, A.,2012. Controlled grafting of cellulose fibers–an outlook beyond paper and cardboard. Polymer Chemistry 3:1702–13.
13
-Mandal, A., Chakrabarty, D., 2013. Studies on the mechanical, thermal, morphological and barrier properties of nanocomposites based on poly(vinyl alcohol) and nanocellulose from sugarcane bagasse,Journal of Industrial and Engineering Chemistry 462-473
14
-Oksman, K., Mathew, A,P., Bondeson, D., Kvien, I., 2006. Manufacturing process of cellulose whiskers/polylactic acid nanocomposites. Composite Science andTechnology. 66:2776–2784.
15
-Oksman, K., Sain , M., Wang, B., 2007. Study of Structural Morphology of Hemp Fiber from the Micro to the Nanoscale, Applied Composite Materials 14: 89–103.
16
-Pakzad, A., Simonsen, J., Yassar, R,S., 2012. Gradient of nanomechanical properties in the interphase of cellulose nanocrystal composites, Composites Science and Technology. 72: 314–319
17
-Pracella, M., Minhaz-UI Haque, Md., Puglia, D., 2014.Morphology and properties tuning of PLA/cellulose nanocrystals bio-nanocomposites by means of reactive functionalization and blending with PVAc, Polymer 55: 3720-3728.
18
-Sliwa, F., Bounia, N, E., Charrier, F., Marin, G., Malet, F., 2012.Mechanical and interfacial properties of wood and bio-based thermoplastic composite,Composites Science and Technology 72 : 1733–1740
19
-Sorrentino, A., Gorrasi, G., Vittoria, V., 2007. Potential perspectives of bio-nanocomposites for food packaging applications. Trends In Food Science And Technology. 18:84–95.
20
ORIGINAL_ARTICLE
بررسی تأثیر استیلاسیون چوب راش بر مقاومت چسبندگی سطحی شفافپوشهها (سیلر،کیلر و نیم پلیاستر)
در این تحقیق تأثیر استیلاسیون چوب راش بر کاهش میزان چسبندگی سطحی رنگهای شفاف سیلر- کیلر و نیم پلیاستر مورد بررسی قرار گرفت. برای این منظور تختههایی از چوب راش (Orientalis Fagus) با رطوبت نسبی 12 درصد و ابعاد 12 ×110 ×110 میلیمتر در سطوح مماسی و شعاعی تهیه و توسط استیک انیدرید در دو سطح 5/12 و 5/15 درصد تیمار شدند، سپس طی دو فرایند جداگانه توسط رنگهای شفاف سیلر-کیلر و سیلر-نیمپلیاستر پوشش داده شدند. برای بررسی تأثیر فرایند استیلاسیون بر ساختار چوب تیمار شده از طیف FT-IR استفاده شد. نتایج این آزمون که توسط نرمافزار SPSS (6 تکرار برای هر نمونه) مورد تجزیهوتحلیل آماری قرار گرفت، نشان داد که میزان کاهش چسبندگی در سطح شعاعی چوب راش بیشتر از سطح مماسی آن است. البته در میان نمونههای تیمار شده، بیشترین کاهش چسبندگی مربوط به نمونههای استیله با شدت استیلاسیون 5/15 درصد میباشد و کمترین میزان کاهش چسبندگی در نمونههای کنترل ملاحظه شد. نتایج همچنین نشان داد که استفاده از پوشش رنگ سیلر- نیم پلیاستر در مقایسه با پوشش رنگ سیلر- کیلر دارای مقاومت چسبندگی بالاتری است.
https://ijwpr.areeo.ac.ir/article_102671_b41233dd4ca69d36343e1e1c5aa8e135.pdf
2016-03-20
105
117
10.22092/ijwpr.2015.102671
استیله
سیلر و کیلر
نیم پلیاستر
راش
مقاومت چسبندگی
شهرام
طهماسبی
shahram_541@yahoo.com
1
کارشناس ارشد، گروه صنایع چوب و کاغذ، دانشگاه آزاد اسلامی واحد علوم و تحقیقات تهران
AUTHOR
بهزاد
بازیار
behzad1351@yahoo.com
2
استادیار گروه صنایع چوب و کاغذ، دانشگاه آزاد اسلامی واحد علوم و تحقیقات تهران
LEAD_AUTHOR
حبیبالله
خادمی اسلام
hkhademieslam@gmail.com
3
دانشیار گروه صنایع چوب و کاغذ، دانشگاه آزاد اسلامی واحد علوم و تحقیقات تهران
AUTHOR
محمد
غفرانی
ghofrani@sru.ac.ir
4
دانشیار گروه صنایع چوب، دانشکده عمران، دانشگاه تربیت دبیر شهید رجائی تهران
AUTHOR
-Akhtari, M. and Arif Khani, M., 2010. Investigating the effect of weathering on acetylated Beech wood using by FTIR spectroscopy and electron microscopic. Iran Wood and Paper Study Center, 25(1): 61-48.
1
-ASTM D 4541, (2002). Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers.
2
-ASTM D 3359 (1997). Standard Test Methods for Measuring Adhesion by Tape Test.
3
-ASTM D 3924 (1996). Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials.
4
-Eldwson, T., Bergström, P. and HämälÄinen, M., 2003. Moisture dynamics in Norway Spruce and Scots Pine during outdoor exposure in relation to different surface treatments and handling conditions. Holzforschung, 57(2): 219-227.
5
-Faucheu, J., Wood, K. A., Sung, L.P. and Martin, J. W., 2006. Relating gloss loss to topographical features of a PVDF coating. Journal of Coatings and Technology and Research, 3(1): 29-39.
6
-Hemmasi, A.H., Soltani, M., khademi Eslam, H. and Mohebbi, B., 2010. The mechanical properties of acetylated medium density fiberboard (MDF). Journal of Sciences and Techniques in Natural Resources, 5th year, issue 1.
7
-Hillis, W.E, 1984. High temperature and chemical effects on wood stability. Part 1: general considerations. Wood Science and Technology. 18(4): 281-293.
8
-Hillis, W.E. and Rozsa A.N., 1978. The softening temperatures of wood. International Journal of the Biology, Chemistry, Physics and Technology of Wood. Holzforschung, 32(2), 68-73.
9
-Kasnez, Selection and Application of Preservative-Treated Wood translated by Karimi A.N., Zadeh Kameli, F., 2005, Ayeezh, 162p.
10
-Kaygin, B. and Akgun, E., 2008. Comparison of conventional varnishes with nanolacke UV varnish with respect to hardness and adhesion durability. International Journal of Molecular Science, 9(4): 476–485.
11
-Keikha, M, Kazemi, M. and Ghorbani Kokandeh, M., 2011. Investigation of dimensional stability of acetylated Lumber by FTIR spectroscopy. 5th Conference on Environmental Engineering. 30 Aban-1 Azar, 2011.
12
-Keshani Langrodi, S. and Parsapazhooh, D., 2006. A Comparison on performance of polyester, half-polyester and sealer-kiler coat on application properties of beech wood furniture and plywood. MS Thesis, Department of Natural Resources, Tehran University, 245.
13
-Keskin, H., Atar, M. Korkut S. and Tekin A., 2010. Scratch resistance of cellulosic, synthetic, polyurethane, waterborne and acid-hardening varnishes used on woods. Industrial Corps and Products, 31(2): 219-224.
14
-Kilic, M., 2009. The effects of steaming of beech (Fagus orientalis L.) and sapele (Entandrophragma cylindricum) woods on the adhesion strength of varnish. Journal of Applied Polymer Science, 113(6): 3492-3497.
15
-Krim Shayda, M., 2012. Effect of cold plasma on the surface properties of chemically modified wood. MS Thesis, Department of Wood and Paper Industry, wood and paper department, Science and Research Branch of Islamic Azad University.
16
-Manavi, G. H., 2011. Investigation of Adhesion Strength of Clear Finishes (Nitrocellulose Lacquers, Acid Catalyst Lacquers) on Furniture Surfaces Made from Beech, Elm, Alder and Spruce Wood. MS thesis. Civil Engineering Department, Shahid Rajaee Teacher Training University.
17
-Masteri Farahani, M., Soraian, A. R., Jonoubi, M., 2010. Investigation of dimensional stability and mechanical properties of board produced by acetylated Bagasse. Journal of Wood and Forest Science and Technology, 17(3).
18
-Mazandarani, M. A., 1989. Paint and Resin Technology, Pishroo, Tehran, 416p.
19
Mohebby, B,. 2003: Biological attack of acetylated wood, Ph.D. Thesis, Gottingen University, Gottingen: p.147.
20
-Momen Heravi, A. and Azimi Nanevaei, A.R., 1996. Paint Experimental Chemistry. Amir Kabir, Tehran, 600p.
21
-Nilofari, P., 1985: Study of Wood in Iran. Dehkhoda bookstore. 820p.
22
-ParsaPazhouh, D. and Shuan Grober F., 2008. Iran’s North woods Atlas. Tehran University, 136p.
23
-Podgorski, L., Georges, V., Condomines, N., Lanvin, J-D., 2004. Adhesion measurements methods, Cost E18- Wood and coating systems for wood - Symposium on measurement methods. Copenhagen, February: 1-6.
24
-Rydvet, B., The Destruction of Wood Productions in Construction (Engineering Methods in preserving Treatments) translated by Karimi, A. N., Afra, E., 2005., Ayeezh, 308p.
25
-Sonmez, A. Budakci, M. and Bayram, M., 2009. Effect of wood moisture content on adhesion of varnish Coatings. Scientific Research and Essay, 4(12): 432-437.
26
-Sundell, P., Meijer, D. and Militz, H. and Veldhuizen, B.V., Influence of acetylation on discoloration and weathering of (coated) wood. Cost E 18 Meeting, Paris, June 2001.
27
ORIGINAL_ARTICLE
عملکرد سازه ای اتصال گوشه مقاوم سازی شده با پلیمرهای تقویت شده با الیاف تحت بارگذاری کشش قطری
در تحقیق حاضر عملکرد سازهای اتصال گوشه مقاومسازی شده با پلیمرهای تقویت شده با الیاف در ناحیه حداکثر تنش کششی (گوشه داخلی) تحت بارگذاری کشش قطری مورد مطالعه قرار گرفت. بدین منظور 1 تا 3 لایه از پارچههای تک جهته الیاف شیشه، کربن و کولار مورد استفاده قرار گرفت و عمل لایهگذاری به صورت دستی و با استفاده از دو نوع رزین وینیلاستر و اپوکسی انجام گرفت. نتایج اندازهگیری نیرو و تغییرمکان در حد تسیلم، نشان دادهاند که لایههای تقویت کننده تا حدی قادر به-جلوگیری از باز شدن اتصال تحت بار هستند. با افزایش بار و با جدا شدن الیاف از سطح چوب و یا شکست اعضا در ناحیهای نزدیک به سطح مشترک، گسیختگی در اتصال مشاهده شده است. همچنین به دلیل اینکه محل تقویت اتصال با پلیمرهای تقویت شده با الیاف دارای حداکثر مقدار تنش برشی است، جداشدن الیاف از سطح چوب افزایش یافتهاست. بهعلت دشواری لایه گذاری با زاویه 90 درجه و احتمال تشکیل حبابهای هوا چسبندگی مناسب کاهش پیدا میکند. نتایج بررسی رفتار تقویت کنندگی پلیمرهای تقویت شده با الیاف نشان دادهاند که ماتریس وینیلاستر در مقایسه با ماتریس اپوکسی و همچنین الیاف شیشه و کربن نسبت به الیاف کولار عملکرد بهتری داشتهاند.
https://ijwpr.areeo.ac.ir/article_105609_4a8c21fad2d8dd489a7cc1ac38068cff.pdf
2016-03-20
118
129
10.22092/ijwpr.2015.105609
اتصال گوشه
پلیمرهای تقویت شده با الیاف
رزین وینیل استر و رزین اپوکسی
حمیده
عبدل زاده
h_abdolzadeh@ut.ac.ir
1
فارغالتحصیل دکترای علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
LEAD_AUTHOR
قنبر
ابراهیمی
ibrahimi@ut.ac.ir
2
استاد صنایع چوب و کاغذ، دانشکده منابع طبیعی دانشگاه تهران
AUTHOR
محمد
لایقی
mlayeghi@ut.ac.ir
3
استادیار دانشکده منابع طبیعی دانشگاه تهران
AUTHOR
Abdolzadeh, H., Layeghi, M., Ebrahimi, G. and Ghassemieh, M., 2014. Study of stress capacity improvement of L-type joint by chemical modification of wood. BioResources. 9(3): 5302-5310.
1
-Beheshty, M.H. and Rezadoust, A.M., 2005. Reinforced plastics (Polymer Composites). Tehran, Iran Polymer & Petrochemical Institute, 446p.
2
-Biblis, E. J., 1965. Analysis of wood- fiberglass composite beams within and beyond the elastic region. Forest Products Journal. 15(2): 81-88.
3
-Campilho, R.D.S.G., de Moura, M.F.S.F., Barreto, A.M.J. P., Morais, J. J. L. and Domingues, J. J. M. S., 2009. Fracture behavior of damaged wood beams repaired with an adhesively-bonded composite patch. Composites: Part A. 40: 852-859.
4
-Chen, C.J., 2007. The study on improved mechanical properties of reinforced traditional Chuan-Dou timber joints in taiwan. Journal of Cultural Property Conservation. 1(3): 5-14.
5
-Dagher, H.J. and Lindyberg, R., 2000. FRP-wood hybrids for bridges: a comparison of E-glass and carbon reinforcements. Proceedings of ASCE conference, Philadelphia, USA, 7–10 Ma:1-8.
6
-Daniel, F.W., Lawrence, A.S., and Robert J.R., 1997. Feasibility of fiberglass-reinforced bolted wood connections. Madison, Wisconsin, Forest Products Laboratory.
7
-Ebrahimi, G., 2007. Engineering design of structure of furniture. Tehran, University of Tehran, 491p.
8
-Gustafsson, P. J., 2003. Fracture perpendicular to grain - structural applications. Timber engineering. S. landerson and H. J. Larsen, Wiley & Sons.
9
-Raftery, G. M., Harte, A.M., and Rodd, P.D., 2009. Bond quality at the FRP-wood interface using wood-laminating adhesives. International Journal of Adhesion & Adhesives. 29: 101- 110.
10
-Snow, M., Chen, A.A.Z. and Chui, Y.H., 2006. North American practices for connection in wood construction. Progress in Structural Engineering and Materials. 8(2): 39-48.
11
-Tankut, A.N. and Tankut, N., 2004. Effect of some factors on the strength of furniture corner joints constructed with wood biscuits. Turkish Journal of Agriculture and Forestry. 28: 301-309.
12
-Tannert, T. (2009). Structural Performance of Rounded Dovetail Connections. Vancouver, Canada, British columbia University. PhD Thesis.
13
-Tannert, T., Lam, F. and Vallée, T., 2010. Structural performance of rounded dovetail connections: experimental and numerical investigations. Eurpean Journal of Wood and Wood Product. 69: 471-482.
14
-Wangaard, F.F., 1964. Elastic deflection of wooden- fiberglass composite beam. Forest Products Journal. 14(6): 256-260.
15
ORIGINAL_ARTICLE
رفتار زیست تخریب پذیری و مهاجرت در کامپوزیت های پلی لاکتیک اسید تقویت شده با نانوکریستال سلولز و نانورس
این تحقیق با هدف بررسی تأثیر حضور همزمان نانوکریستال سلولز و نانورس بر رفتار زیستتخریبپذیری و مهاجرت فیلم های برپایه پلی لاکتیک اسید انجام شد. فیلم های پلی لاکتیک اسید و نانوکامپوزیت های آن حاوی درصدهای مختلف نانوکریستال سلولز و نانورس (0، 3 و 5 درصد وزنی) با استفاده از روش قالب گیری حلال ساخته شد. برای بهبود سازگاری و اختلاط پذیری با پلیمر، نانوکریستال سلولز با اسید اولئیک وارد واکنش شده و اصلاح شد. سپس، برای ارزیابی رفتار زیست تخریب پذیری و مهاجرت فیلم ها، میزان کاهش وزن در آنزیم و دفن در خاک و کمپوست و میزان مهاجرت کلی نمونه ها اندازه گیری شد. نتایج نشان داد که میزان زیست تخریب پذیری کامپوزیت ها در محیط آنزیمی، خاک و کمپوست، با افزایش مقدار نانوذرات کاهش می یابد. از طرف دیگر با افزودن نانوکریستال سلولز و نانورس به ماده زمینه پلیمری میزان مهاجرت کلی کامپوزیت ها کاهش یافت. این مسئله را می توان به چسبندگی بهتر نانوذرات با ماده زمینه پلیمری و تشکیل مسیرهای پرپیچ و خم نسبت داد.
https://ijwpr.areeo.ac.ir/article_105612_db6f1b239aeffafcfd501723cd10c75a.pdf
2016-03-20
130
140
10.22092/ijwpr.2015.105612
نانوکامپوزیت
پلی لاکتیک اسید
زیست تخریب پذیری
کاهش وزن
مهاجرت کلی
بهزاد
کرد
b.kord@standard.ac.ir
1
استادیار گروه سلولزی و بسته بندی، پژوهشکده شیمی و پتروشیمی، پژوهشگاه استاندارد، کرج، صندوق پستی 139-31745، ایران
LEAD_AUTHOR
مهدی
روحانی
mroohani@standard.ac.ir
2
استادیار گروه سلولزی و بسته بندی، پژوهشکده شیمی و پتروشیمی، پژوهشگاه استاندارد، کرج، صندوق پستی 139-31745، ایران
AUTHOR
-Almasi, H., Ghanbarzadeh, B., and Dehghannia, J. 2014. Properties of Poly(lactic acid) nanocomposite film containing modified cellulose nanofibers, Iranian Journal of Polymer Science and Technology 26(6): 485-497.
1
-Bordes, P., Pollet, E., and Avérous, L. 2009. Nano-biocomposites: Biodegradable polyester/nanoclay systems, Progress in Polymer Science 34(2): 125–155.
2
-Chuensangjun, C., Pechyen, C., and Sarote Sirisansaneeyakul, S. 2013. Degradation behaviors of different blends of polylactic acid buried in soil, Energy Procedia 34: 73–82.
3
-Dadashi, S., Mousavi, M., Emam D-Jomeh, Z., and Oromiehie, A. 2012. Films based on Poly(lactic acid) biopolymer: effect of clay and cellulosic nanoparticles on their physical, mechanical and structural properties, Iranian Journal of Polymer Science and Technology 25(2): 127-136.
4
-Drumright, R.E., Gruber, P.R., and Henton, D.E. 2000. Polylactic acid technology, Advanced Materials 12: 1841–1846.
5
-De Souza Lima, M.M., Wong, J.T., Paillet, M., Borsali, R., and Pecora, R. 2003. Translational and Rotational Dynamics of Rodlike Cellulose Whiskers, Langmuir, 19(1): 24-29.
6
-EN-1186. 2000. Overall migration testing for packaging and other food contact materials.
7
-Fortunati, E., Peltzer, M., Armentano, L., Torre, L., Jiménez, A., and Kenny, J.M., 2012. Effects of modified cellulose nanocrystals on the barrier and migration properties of PLA nano-biocomposites. Carbohydrate Polymers, 90: 948– 956.
8
-Fukushima, K., Abbate, C., Tabuani, D., Gennari, M., and Camino, G., 2009.Biodegradation of poly(lactic acid) and its nanocomposites. Polymer Degradation and Stability, 94(10): 1646–1655.
9
-Garlotta, D., 2001. A literature review of poly(lactic acid). Journal of Polymers and the Environment, 9(2): 63–84.
10
-Hakkarainen, M., Karlsson, S., and Albertsson, A.C., 2000. Rapid (bio)degradation of polylactide by mixed culture of compost microorganisms-low molecular weight products and matrix changes. Polymer 41: 2331–2338.
11
-Ibach, R.E., Clemons, C.M., and Schumann, R.L., 2007. Wood-plastic composites with reduced moisture: Effects of chemical modification on durability in the laboratory and field. In: 9th international conference on wood and biofiber plastic composites, Madison, Wisconsin, USA.
12
-Karamanlioglu, M., 2013. Environmental degradation of the compostable plastic packaging material poly(lactic) acid and its impact on fungal communities in compost. PhD Thesis, University of Manchester, 198p.
13
-Krishnamachari, P., Zhang, J., Lou, J., Yan, J., and Uitenham, L., 2009. Biodegradable poly(lactic acid)/clay nanocomposites by melt intercalation: a study of morphological, thermal, and mechanical properties. International Journal of Polymer Analysis and Characterization, 14(4): 336-350.
14
-Kord, B., Jari, E., Najafi, A., and Tazakorrezaie, V., 2014. Effect of nanoclay on the decay resistance and physicomechanical properties of natural fiber-reinforced plastic composites against white-rot fungi (Trametes versicolor). Journal of Thermoplastic Composite Materials, 27(8): 1085-1096.
15
-Kord, B. and Roohani, M., 2015. Morphological, mechanical and barrier properties of polylactic acid/cellulose nanocrystal/nanoclay composite films. Journal of Wood and Forest Science and Technology, 21 (4), 41- 60.
16
-Lee, S.H., and Wang, S., 2006. Biodegradable polymers/bamboo fiber biocomposite with bio-based coupling agent. Composites: Part A, 37: 80–91.
17
-Lim, L.T., Auras, R., and Rubino, M., 2008. Processing technologies for poly(lactic acid). Progress in Polymer Science, 33: 820–852.
18
-Liu, D. Y., Yuan, X. W., Bhattacharyya, D. and Easteal A. J., 2010. Characterisation of solution cast cellulose nanofiber reinforced poly(lactic acid) Express Polymer Letters, 4(1): 26–31.
19
-Mutsuga, M., Kawamura, Y., and Tanamoto, K., 2008. Migration of lactic acid lactide and oligomers from polylactide food-contact materials. Food Additives and Contaminants, 25: 1283–1290. -Nieddu, E., Mazzucco, L., Gentile, P., Benko, T., Balbo, V., Mandrile, R., and Ciardelli, G., 2009. Preparation and biodegradation of clay composites of PLA. Reactive and Functional Polymers, 9(6): 371–379.
20
-Noushirvani, N., Ghanbarzadeh, B., and Entezami, A.K., 2011. Comparison of tensile, permeability and color properties of starch-based bionanocomposites containing two types of fillers: sodium montmorilonite and cellulose nanocrystal. Iranian Journal of Polymer Science and Technology, 24(5): 391-402
21
-Paul, M.A., Delcourt, C., Alexandre, M., Degée, P.H., Monteverde, F., and Dubois, P.H., 2005. Polylactide/montmorillonite nanocomposites: study of the hydrolytic degradation. Polymer Degradation and Stability, 87(3), 535–542.
22
-Rhim, J.W., Hong, S.I., and Ha, C.S., 2009. Tensile, water vapor barrier and antimicrobial properties of PLA/nanoclay composite films. LWT- Food Science and Technology, 42: 612–617.
23
-Roohani, M., Habibi, Y., Belgacem, N.M., Ebrahim, G., Karimi, A.N., and Dufresne, A., 2008. Cellulose whiskers reinforced polyvinyl alcohol copolymers nanocomposites. European Polymer Journal, 44(8): 2489–2498.
24
-Roohani, M., Kord, B., Motie, N., and Sharari, M., 2014. Biodegradation behaviors of cellulose nanocrystals -PVA nanocomposites. Iranian Journal of Wood and Paper Industries, 5(2): 1-14. -Roy, P.K., Hakkarainen, M., and Albertsson, A.C., 2012. Nanoclay effects on the degradation process and product patterns of polylactide. Polymer Degradation and Stability, 97(8), 124-1260.
25
-Shogrena, R.L., Doane, W.M., Garlotta, D., Lawton, J.W., and Willett, J.L., 2003. Biodegradation of starch/polylactic acid/poly(hydroxyester-ether) composite bars in soil. Polymer Degradation and Stability, 79: 405–411.
26
-Sinha Ray, S., and Okamoto, M., 2003. Biodegradable polylactide and its nanocomposites: opening a new dimension for plastics and composites. Macromolecules Rapid Communication 24: 815–840.
27
-Singh G., Kaur N., Bhunia H., Bajpai P.K., Mandal U.K., 2011. Degradation behaviors of linear low-density polyethylene and poly(Llactic acid) blends. Journal of Applied Polymer Science, 124:1993-1998.
28
ORIGINAL_ARTICLE
اثر تیمار لایه مغزی و مقدار پرکننده پودر بادام در خط چسب بر روی مقاومت چسبندگی کششی پانل ساندویچ
هدف از این پژوهش بررسی اثر تیمار خردههای نی(Arundo donax) بکار رفته در لایه میانی پانل ساندویچی (بدون تیمار، با تیمار حرارتی خشک و آب جوش) و نیز نسبت وزنی پودر پوسته میوه بادام به رزین ملامین اوره فرمآلدئید در سه سطح (3:97، 18:82 و 33:67) بر روی مقاومت چسبندگی کششی خشک و تر (بعد از 2 ساعت غوطهوری در آب جوش) پانل ساندویچی بوده است. تحلیل آماری نتایج و گروهبندی دانکن نشان داد که نوع تیمار خردههای لایه میانی و نسبت پودر پوسته میوه بادام تأثیر معنیداری بر روی مقاومت چسبندگی کششی خشک و تر داشته است. نتایج حاصل از طیفهای FT_IR بهدست آمده از نمونه-های پانلهای ساخته شده با خردههای تحت تیمار آب جوش نیز نشان داد که تیمار آب جوش باعث افزایش تعداد پیوندهای شیمیایی میشود. همچنین تصاویر ماکروسکوپی نشان داده است که تیمار آب جوش بهترین سطح، جهت اتصال مطلوب را می تواند ایجاد کند. بهطور کلی پانلهای حاوی خردههای تیمارشده با آب جوش در لایه مغزی و 33 درصد پرکننده پودر پوسته میوه بادام در خط چسب بیشترین مقاومت چسبندگی کششی در حالت خشک (MPa 01/5) و تر (MPa 86/2) را داشتهاند.
https://ijwpr.areeo.ac.ir/article_105605_ca6d80e20f8bccf37a69911b14695735.pdf
2016-03-20
141
153
10.22092/ijwpr.2015.105605
پانل ساندویچ
پوسته میوه بادام
طیف مادون قرمز
پودر
مقاومت چسبندگی کششی
مرتضی
ناظریان
morteza17172000@yahoo.com
1
دانشیار گروه علوم و صنایع چوب و کاغذ، دانشگاه زابل،
LEAD_AUTHOR
وحید
معظمی
moazami_vahid@yahoo.com
2
دانشجوی کارشناسی ارشد گروه علوم و صنایع چوب و کاغذ، دانشگاه زابل
AUTHOR
رحیم
محبی گرگری
rahim.mohebbi@yahoo.com
3
مربی گروه علوم و صنایع چوب و کاغذ، دانشگاه زابل
AUTHOR
- ASTM D 4541. 2002. Standard Test Method for Pull- Off Strength of Coatings Using Portable Adhesion Testers.
1
- Bodirlau, R. and Teaca, C.A. 2009. Fourier transform infrared spectroscopy and thermal analyses of lignocellulose fillers treated with organic anhydrides. International Journal of Rom. Journ. Phys. 54(1–2): 93-104.
2
- Bodirlau, R., Teaca, C.A., Resmerita, A.M. and Spiridon, I. 2012. Investigation of structural and thermal properties of different wood species treated with toluene-2, 4-diisocyanate. International Journal of Cellulose chemistry and technology, 46 (5-6): 381-387.
3
- Boonstra, M.J. and Tjeerdsma, B.F. 2006. Chemical analysis of heat-treated softwoods. International Journal of Holz als roh und Werkstoff, 64:204-211.
4
- Coates, J. 2000. Interpretation of Infrared Spectra, a Practical Approach. In: Meyers R, editor. Encyclopedia of Analytical Chemistry. Chichester: John Wiley and Sons, 10815-10837.
5
- Colom, X., Carrillo, F., Nogues, F. and Garriga, p. 2003. Structural analysis of photo degraded wood by means of FTIR spectroscopy. International Journal of Polymer Degrade. Stab, 80: 543–549.
6
- Ding, T., Gu, L. and Li, T. 2011. Influence of steam pressure on chemical changes of heat-traded Mongolian pine wood. Journal of Bio Resources, 6(2): 1880-1889.
7
- Doosthoseini, k., and Moezzipour b. 2011. Utilization of waste paper and old corrugated carton (OCC) as a filler of urea formaldehyde resin on plywood manufacturing. Iranian Journal of Wood and Paper Science Research, 26(2): 271-280.
8
- Ebringerova, A., Heromadkova, Z., Kostalova, Z. and Sasinkova, V. 2008. Chemical valorization of agricultural by-products: isolation and characterization of xylan-based antioxidants from almond shell biomass. International Journal of Bioresources, 3:60-70.
9
- Edoga, M.O. 2006. Comparative study of synthesis procedures for urea-formaldehyde resins (Part I). Leonardo Electron International Journal of Pract Techno, 72 (1):607-17.
10
- Charles, R., Frihart, C.R. and Wescott, J.M. 2004. Improved water resistance of bio-based adhesives for wood bonding, In: Jorge, F.E. (Ed.), Proceedings of ICECFOP1 – 1st International Conference on Environmentally-Compatible Forest Products, Oporto, Portugal, September 22–24, p. 293-302.
11
- Gierlinger, N., Goswami, L., Schmidt, M., Burgert, I., Coutand, C., Rogge, T. and Scwanninger, M. 2008. In situ FT-IR microscopic study on enzymatic treatment of poplar wood cross-sections. International Journal of Biomacromolecules, 9: 2194-2201.
12
- Kumar, A., Gupta, A., Sharma, K.V., Nasir, M. and Ahamed Khan, T. 2013. Infl uence of activated charcoal as filler on the properties of wood composites. International Journal of Adhesion & Adhesives, 46: 34-3.
13
- Lee, J., Gwak, K., Park, J., Park, M., Choi, D., Kwon, M. and Choi, I. 2007. Biological pretreatment of softwood pinus densiflora by three white rot fungi. Journal of Microbiology, 45:485-491.
14
- Leiva, P., Ciannamea, E., Ruseckaite, R.A. and Stefani, P.M. 2007. Medium-density particleboards from rice husks and soybean protein concentrate. International Journal of Applied Polymer Science, 106 (2), 1301–1306.
15
- Muller, U., Ratzsch, M., Schwanninger, M., Steiner, M. and Zobl, H. 2003. Yellowing and IR-changes of spruce wood as results of UV-irradiatioon. International Journal of photochemistry Photobiology B, Biology, 69: 97-105.
16
- Nemli, G. 2003. Effects of some manufacturing factors on the properties of particleboard manufactured from alder (Alnus glutinosa subsp. Barbata). Turkish Journal of Agriculture and Forestry, 27 (3), 99-104.
17
- Okino, E.Y.A., Termeira, D. E. and Menezzi, C.H. S. 2007. Post-Thermal Treatment of oriented strand board (OSB) made from cypress (cupressus glauca lam). Journal of Maderas Ciencia Technological, 3: 199-210.
18
- Pirayesh, H. and Khazaeian, A. 2012. Using almond (Prunus amygdalus L.) shell as a bio-waste resource in wood based composite. International Journal of Composites: Part B, 43(3): 1475-1479.
19
- Pandey, K.K. and Pitman, A.J. 2003. FTIR studies of the changes in wood chemistry following decay by brown-rot and white-rot fungi. International Journal of Biodeterior-ation and Biodegradation, 53(3): 151-160.
20
- Seller, T., George, D. and Smith, W. 2005. Tool wear properties of five extender fillers in adhesive mixes for plywood. International Journal of Forest products journal, 55(3): 27-31.
21
- Simon, C., George, B. and Pizzi, A. 2002. Copolymerization in UF/PMDI adhesives networks. Journal of Applied Polymer Science,86(14): 3681-3688.
22
- Sain, M. and Panthapulakkal, S. 2006. Bioprocess preparation of wheat straw fibers and their characterization. Journal of Industrial Crops and Products, 23 (1), 1-8.
23
- Urrestarazu, M., Martınez, G.A. and Carmen Salas, M.D. 2005. Almond shell waste: possiblelocal rockwool substitute in soilless crop culture. Journal ofScientia Horticulturae, 103 (2005): 453-60.
24
Veigel, S., Muller, U., Keckes, J., Obersriebnig, M., and Gindl-Altmutter, W., 2011. Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds. Cellulose, 18:1227–1237.
25
- Widyorini, R., Xu, J., Umemura, K. and Kawai, S. 2005. Manufacture and properties of binder less particleboard from bagasse. I. Effects of raw material type, storage methods, and manufacturing process. Journal of Wood Sci. 51 (6): 648–654.
26
- Zhand, S., Masoudifar, M., Saraeian, A.R. and Ghasemian, A. 2014. Comparison of hot water and alkaline pre-treatments on the properties of wheat straw NSSC pulp. Iranian Journal of Wood and Paper Science Research, 28(4): 774-794.
27
- Zhou, D., Zhang, L. and Guo, S. 2005. Mechanisms of lead bio sorption on cellulose/chitin beads. Journal of Water Research, 39(16): 3755 –3762.
28
ORIGINAL_ARTICLE
اثر طول ذرات میکرو سلولز بر خواص مکانیکی ، حرارتی و مورفولوژیکی نانو چندسازه چوب- پلاستیک
در این بررسی استفاده از ذرات میکروکریستالین سلولز در ساخت نانو چندسازه چوب پلاستیک مورد توجه قرار گرفته است. اثرات ابعاد ذرات میکرو کریستالین سلولز و جفت کننده مالییکی(MAPP) بر خواص مکانیکی، ریخت شناسی و حرارتی نانو چندسازه چوب پلاستیک مطالعه شده است. در این بررسی استفاده از ذرات میکروکریستالین سلولز بهمراه آرد چوب در دو سطح 20 و 50 میکرون ، درصد جفت کننده مالییکی 5/2 و 5 درصد بهمراه 3 درصد نانو رس در تهیه چند سازه چوب پلاستیک مورد توجه قرار گرفت. نتایج خواص مکانیکی در چندسازه با طول 50 میکرون ذرات میکرو سلولز و 5 درصد جفت کننده نسبت به سایر تیمارها برتر بوده است. همچنین نتایج آزمایشات نشان دادکه استفاده از جفت کننده مالییکی باعث بهبود خواص حرارتی در جریان مخلوطسازی در فاز درون سطحی شده و سبب اتصال بهتر بین الیاف و ماتریس گردیده است. خواص مکانیکی نانو چند سازه با استفاده از عکسبرداری SEM و TEM مورد بررسی گرفته است. پراکنش ذرات نانو رس در ماتریس چند سازه و تجزیه و تحلیل رفتار حرارتی چند سازه نیز به کمک آزمون TGA نشان داده که استفاده از 5% عامل جفت کننده مالییکی بهمراه ابعاد بلندتر ذرات میکرو سلولز بطور مشخص باعث افزایش مقاومت حرارتی چند سازه نسبت به سایر تیمارها شده است.
https://ijwpr.areeo.ac.ir/article_102673_3c70327d5480a38edf15d15dd6b5b538.pdf
2016-03-20
154
165
10.22092/ijwpr.2015.102673
چندسازه
میکرو سلولز
نانو رس
جفتکننده مالییکی
خواص مکانیکی
خواص حرارتی
امیر
نوربخش
nourbakhsh_amir@yahoo.com
1
دانشیار، صنایع چوب و کاغذ، بخش تحقیقات علوم چوب و فراوردههای آن، مؤسسه تحقیقات جنگلها و مراتع کشور، تهران
LEAD_AUTHOR
ابوالفضل
کارگرفرد
a_kargarfard@yahoo.com
2
دانشیار، صنایع چوب و کاغذ، بخش تحقیقات علوم چوب و فراوردههای آن، مؤسسه تحقیقات جنگلها و مراتع کشور، تهران
AUTHOR
-Annual book of ASTM standards.(1999). American Society for Testing and Materials, 100 Barr Harbor Dr., West Conshohocken, PA 19428, United States
1
-Ashori, A. and Nourbakhsh A. (2009). Characteristics of wood–fiber plastic composites made of recycled materials: Waste Manag Vol.29: 5pp.
2
-Han, G., Lei, Y., Wu, Q., Kojima, Y. and Suzuki, S. (2008). Bamboo-fiber filled high density polyethylene composites; effect of coupling treatmentand nanoclay. J Polym Environ Vol.21: 15pp.
3
-Hristove, V.N., Vasileva, S.T., Krumova, M. and Michler, R. (2004). Deformation mechanisms and mechanical properties of modified polypropylene/wood fiber composites. Journal of Polymer Composites. 25(5). 1015-1022.
4
-Li Q, Matuana LM. (2003). Surface of cellulosic materials modified with functionalized polyethylene coupling agents. J Appl Polym Sci Vol:88:9 pp.
5
-Meyrs EG, Chahyadi IS, Gonzalez C, Coberly CA .(1993). Wood fibres/polymer composites: fundamental concepts, processes, and material options. Forest Product Society, Madison, USA
6
-Morreale M, Scaffaro R, Maio A, La Mantia FP .(2008). Effect of adding wood flour to the physical properties of a biodegradable. Compos Part A Vol:39:14 pp
7
-Nourbakhsh A, Ashori A, and Jahan-Latibari A. (2010). Evaluation of the physical and mechanical properties of medium density fiberboard made from old newsprint fibers. J Reinf. Plast. Compos Vol:29:7 pp
8
-Nourbakhsh, A. and Ashori, A. (2008). Fundamental Studies on Wood-plastic Composites: Effects of Fiber Concentration and Mixing Temperature on the Mechanical Properties of Poplar/PP Composite, Polymer Composites, 29(5): 569_573.
9
-Sheng ( 2003). Application of Nano-Composites and Woodfiber Plastics for Microcellular Injection Molding . 7th International Conferences on Woodfiber – Plastics Composites May 19-20 2003 Monona Terrace Community & Convention Center Madison , Wisconsin , USA
10
-Stark NM, Rowlands RE (2003). Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites. Wood Fiber Sci Vol:35: 8pp
11
-Wang S-Y, Yang T-H, Lin L-T, Lin C-J, Tsai M-J (2007). Properties of low formaldehyde-emission particleboard made from recycled wood-waste chips sprayed with PMDI/PF resin. Build Environ Vol: 42:8 pp
12
-Zhou,Y., Rangari, V., Mahfuz, H., Jeelani, Sh., Mallick, P.K. (2005). Experimental study on thermal and mechanical behavior of polypropylene, talc/polypropylene and polypropylene/clay nanocomposites. Mater Sci Eng A. Vol:402: 9 pp.
13
ORIGINAL_ARTICLE
کاربرد نانو نقره در تولید کاغذ اسکناس ضد باکتری
اسکناس درطی دوره عمر خود از محیط های مختلف و مشاغل گوناگون، آن هم با فراوانی زیاد عبور می کند به طوریکه طی مطالعات علمی ثابت شده، اسکناس کاغذی را می توان یکی از مهمترین و شاید کم نظیرترین عوامل انتقال دهنده بیماری های عفونی و انگلی در جامعه دانست. هدف از این تحقیق بررسی راهکار مناسبی جهت ضد باکتری کردن کاغذ اسکناس با استفاده از نانو ذرات نقره به عنوان ماده ضد باکتری و کمک نگهدارنده پلی اکریل آمید کاتیونی می باشد. برای این کار خمیرکاغذ آزمایشگاهی الیاف پنبه رنگبری شده با پروکسید با درجه روانی oSR34 و درصد خشکی % 1/3 و pH خنثی تهیه و سپس مواد افزودنی فوق با شرایط مشخص (نانو نقره با مقادیر مصرف 25، 50، 75 و100 پی پی ام به همراه میزان 3/0 درصد پلی اکریل آمید کاتیونی) به آن اضافه گردیده و در پایان از آنها کاغذهای دست ساز 90 گرمی ساخته شد. جهت بررسی صحت نشست ذرات نقره از کاغذهای فوق تصاویر میکروسکوپ الکترونی تهیه شد. به منظور بررسی ضدباکتری شدن کاغذ از روش طیف سنجی فرابنفش-مرئی UV-vis استفاده گردید. همینطور کاغذها از نظر ویژگی های نوری و مقاومتی مورد ارزیابی قرار گرفتند. نتایج نشان داد با افزایش میزان مصرف نانو نقره، میزان مقاومت های کاغذ روند کاهشی، ماتی افزایش و از روشنی کاسته شده است. در خصوص آزمون بیولوژیکی نتایج نشان داد با مصرف بیشتر نانو نقره خصوصیات ضد باکتری کاغذ افزایش یافته است. بنابراین، با توجه به نتایج آزمونهای مقاومتی، نوری و بیولوژیکی و نیز در نظر گرفتن جنبه های اقتصادی و زیست محیطی، میزان مصرفppm 25 برای نانونقره به عنوان تیمار بهینه تعیین گردید.
https://ijwpr.areeo.ac.ir/article_105611_e648a2bac6281b91d1a5b5547da87b38.pdf
2016-03-20
166
179
10.22092/ijwpr.2015.105611
کاغذ اسکناس
کدورت سنجی
کاغذ ضد باکتری
نانوذرات نقره
امید
یزدانی آقمشهدی
omidyazdani29@yahoo.com
1
دانشآموخته کارشناسی ارشد صنایع خمیر و کاغذ، دانشگاه علوم کشاورزی و منابع طبیعی ساری
LEAD_AUTHOR
قاسم
اسد پور اتویی
gh.asadpour@sanru.ac.ir
2
استادیار، گروه مهندسی چوب و کاغذ، دانشگاه علوم کشاورزی و منابع طبیعی ساری
AUTHOR
اسماعیل
رسولی گرمارودی
e_rasooly@sbu.ac.ir
3
استادیار، گروه مهندسی فناوری تولید سلولز و کاغذ، دانشگاه شهید بهشتی، زیرآب، سوادکوه
AUTHOR
رضا
ایمانی
rezaim56@yahoo.com
4
دانش آموخته مقطع دکتری دانشگاه آزاد اسلامی واحد علوم تحقیقات تهران
AUTHOR
-Abrams, B. L., and Waterman, N.G., 1972. Dirty Money, Journal of the American Medical Association, 219: 1202-1203.
1
-Binesh, M., Mortazavi, A., Amin, M. and Moradi, M., 2010. Effect of Silver Nanocomposites whit the titanium dioxide in packing date and the study of microorganisms during storage period. Journal of Food Science and Technology, 2(1):1-8.
2
-Ebrahimi, Z., Kermania, H., Ramazani, O. and Zabihzadeh, S.M., 2013. Com parative analysis of paper properties from rice straw with sodium and potassium based chemimechanical pulping processes. Iranian Journal of Wood and Paper Science Research, 28(3): 534-544.
3
-El-Dars, F.M. and Hassan, W.M., 2005. A Preliminiary Bacterial Study of Egyption paper Money, International Journal of Environmental Health Research 15(3):235-239.
4
-Etemadi, H., Malek nezhad, P. and Zarnegar, T., 1979. Reported 5 cases of Clostridium septicum in the Bill. Tehran University Medical Journal, 35(10): 313-318.
5
-Feng, G.L., Chen, G.Q, Cui, F.Z. and kim, T.N., 2000. Amechanistic study of the antibacterial effect of silver ions on Eschercha coli and Etaphylococcus aureus, Journal of Biomedical Materials Research,52(4): 662-668.
6
-Ghafari, m, 2011. Optimization ofthe use of cationic starch to improve the mechanical properties in the pulp from mixed OCC and virgin NSSC. M. Sc. Thesis, University of Gorgan, gorgan,101p.
7
-Ghenaat, J., Rashd, T., Qazvini, K. and Qazvin, k., 2007. Study of bacterial contaminations of the common coins and banknotes. Medical Journal of Tabriz University of Medical Sciences. 28(2): 67-69.
8
-Green, F. and Arango, R.A., 2007. Wood protection by commercial silver formulations against eastern subterranean termites, paper prepared for the 38th annual meeting jackson lake lodge,wyoming, USA, 20-24 may, irg secretariat,)http://www.irg-wp.com.(
9
-Haji Mirza Baba, H., Montazer, M. and Rahimi, M.K., 2011. “Evaluation of antibacterial coatings containing nano silver nylon,” Islamic Azad University Journal of Medical Sciences 21(2): 101-107
10
-Hamzeh, Y. and Rostampour, A., 2008. Principales of papermaking chemistry. University of Tehran Press, Tehran, 424p.
11
-Imani, R., Talaiepour, M., Dutta, J., Ghobadinezhad, M., Hemmasi, A. and Nazhad, M., 2011. Antibacterial filter paper, Journal of Bioresources. 6 (1): 891-900.
12
-Kasra kermanshahi, R., 2009. Nano-bio-technology point of view of Microbiology. Isfahan University Press.168P.
13
-Kelasen, H.J., 2000. A historical review of the use of silver in the treatment of burns:part I. early uses. Burns Journal, 30:1-9.
14
-Lee, H.J.,Yeo.,S.Y. and Jeong, S.H., 2003. Antibactrial effect of nano sized silver collodial solution on textile fabrics, Jornal of material science, 38: 2199-2204.
15
-Mohamadi, M., 2013. Silver nanoparticles processing and evaluation of its performance on the antimicrobial properties of Health pulp and paper. M. Sc. Thesis, University of Agriculture Sciences and Natural Resources. Gorgan,125p.
16
-Montazer, M., Sadatdar, A. and Rahimi, M., 2012. Production of antibacterial Silk by proteases enzyme and nano silver. Journal of the Iranian carpets Association, 19: 75-82.
17
-Narchin, P., 2014. Processed nano-hybrid silver-clay and its effect on the antimicrobial properties of paper. M. Sc. Thesis, University of Agriculture Science and Natural Resources. Gorgan,104p.
18
-Pinner, R.W., Tutsch, S.M., Simonsen,L., Klug, L.A., Graberj, m. and Brekelman, R.L., 1996. Trends in infectious diseases mortality in the united states. Journal of the American Medical Association, 275(3):189-193.
19
-Safarzadeh, A. and Mosavi, o., 2001. Medical Microbiology. Publisher Tamadon Novin, Iran, 760p. (in Persian)
20
-Scott, W., 1940. Properties of paper: an introduction. Translated by Afra, A, Agricultural Sciences press, Tehran, iran, 392p, (in persian).
21
-Shojaee, A., Sedighi, B., Taheri, A. and Mozafari, N., 2007. Bacterial contamination of various Banknotes. Journal of Occupational Health .2(1): 19-22
22
-Soltani nezhad, Sh. and Mokhtari, T2011. The antibacterial activity of methanol extract of Eucalyptus leaves against Staphylococcus aureus, Escherichia coli and Streptococcus pyogenes in vitro, 2(4): 21-28
23
-Sondi, I. and Salopek-sondi, B., 2004. Silver nano particles as antimicrobial agent: A case study on e.coli and model for grame-negative bactria, Colloid and Interface Science 275(1):177-182.
24
-Tahan, C., Leung, R., Zenner, G. M., Ellison., K. D., Crone., W. C. and Miller, C. A., 2006. Nanotechnology and Improving Packaged Food Quality and Safety: Part 2. Nanocomposites. American Journal of Physics .74(5):443-448.
25
-Te-Hsing, W., Yi-Der, T. and Lie-Hang, S., 2007. The novel methods for preparing antibacterial fabric composites containing nano-material. Solid State Phenomena. 124: 1241-1244.
26
-Zaree, M., Khajeh ali, A. and SHekar forosh., Sh., 2009. Widespread contamination of Banknotes. Journal of Environmental Health Association, 2(1): 81-88.
27
-Zhang, j. p., 1984. A Survey of the Sources of contamination of Chines Paper Money and the dis-infective activity of Microwaves, Zhonghua liu xing bing xue za zhi 5(4): 237-241.
28
-Ziai bigdeli, M., 2001. History of old paper Currency to the Euro. Economic Bulletin.1: 195-205
29