ORIGINAL_ARTICLE
ارزیابی ویژگیهای فیزیکی و مکانیکی چوب اصلاح شده با فرآیند بخارگرمایی
چکیده این پژوهش با هدف بررسی تاثیر اصلاح بخارگرمایی(Hygro-Thermal Treatment) چوب صنوبر(Populus deltoides) بر ویژگیهای فیزیکی و مکانیکی آن انجام گرفت. در این بررسی تیمار بخارگرمایی در دماهای 130، 150 و 170 درجه سانتیگراد و برای مدت زمان ماندگاری صفر، 20 و 40 دقیقه انجام شد. آزمونهای فیزیکی؛ شامل اندازهگیری افت وزن و کلاپس ناشی از تیمار، تغییرات دانسیته، ثبات ابعادی، زبری سطح و آزمونهای مکانیکی؛ شامل مقاومت خمشی و مدول الاستیسیته در چوب تیمار شده انجام شدند. نتایج نشان دادند که تیمار بخارگرمایی موجب بهبود ثبات ابعادی، افزایش کلاپس و زبری سطح و کاهش جرم و دانسیته چوب صنوبر شده است. هم چنین این فرآیند سبب کاهش مقاومت خمشی و افزایش مدول الاستیسیته گردید. از سوی دیگر، با افزایش دمای تیمار و مدت زمان ماندگاری افت وزن، افت دانسیته و هم چنین افزایش پدیده کلاپس روی میدهد؛ در حالی، افزایش ثبات ابعاد با دمای تیمار و مدت زمان ماندگاری رابطه مستقیم دارد.
https://ijwpr.areeo.ac.ir/article_107597_75b7dee10494ef970da3708430575564.pdf
2017-04-21
1
12
10.22092/ijwpr.2017.107597
اصلاح بخارگرمایی
زمان ماندگاری
صنوبر(Populus deltoides)
ویژگیهای فیزیکی و مکانیکی
رضا
حاجی حسنی
reza.hajihassani@gmail.com
1
دانشجوی دکترا، گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی و علوم دریایی، دانشگاه تربیت مدرس
AUTHOR
بهبود
محبی
mohebbyb@modares.ac.ir
2
معاونت آموزشی دانشکده منابع طبیعی و علوم دریایی دانشگاه تربیت مدرس
LEAD_AUTHOR
سعید
کاظمی نجفی
skazemi@modares.ac.ir
3
استاد و مدیر گروه علوم چوب و کاغذ دانشکده منابع طبیعی و علوم دریایی دانشگاه تربیت مدرس
AUTHOR
پرویز
ناوی
parviz.navi@bfh.ch
4
استاد، گروه معماری، مهندسی چوب و سازه چوبی دانشگاه برن، سوئیس
AUTHOR
-Alvira, P., Tomás-Pejó, E., Ballesteros, M., and Negro, M.J., 2010. Pretreatment technologies for an efficient bioethanol production process based on enzymatic hydrolysis: a Review, Bioresour. Technol, 101: 4851–4861.
1
-Assor, C., Placet, V., Chabbert, B., Habrant, A., Lapierre, C., Pollet, B., and Perre, P., 2009. Concomitant changes in viscoelasticity properties and amorphous polymers during the hydrothermal treatment of hardwood and softwood. J. Agric. Food. Chem, 57: 6830–6837.
2
-Biswas, A.K., Yang, W., and Blasiak, W., 2011. Steam pretreatment of salix to upgrade biomass fuel for wood pellet production. Fuel Process Technol, 92: 1711–1717.
3
-Dioufa, P.N., Stevanovicb, T., Cloutierb, A., Fangb, C.H., Blanchetc, P., Koubaad, A., and Mariottib, N., 2011. Effects of thermo-hygro-mechanical densification on the surface characteristics of trembling aspen and hybrid poplar wood veneers, Applied Surface Science, 257: 3558–3564.
4
-Esteves, B., Marques, A.V., Domingos, I., and Pereira, H., 2007. Influence of steam on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus) wood. Wood Sci. Technol, 41: 193–207.
5
-Garrote, G., Domínguez, H., and Parajó, J.C., 1999. Hydrothermal processing of lignocellulosic materials. Holz Roh Werkst, 57: 191–202.
6
-Hakkou, M., Pétrissans, M., Zoulalian, A., and Gérardin, P., 2005. Investigation of wood wettability changes during heat treatment on the basis of chemical analysis. Polymer Degradation and Stability, 89: 1-5.
7
-Hill, C.A.S., 2006. Wood Modification: Chemical, Thermal and Other Processes, John Wiley & Sons Ltd, Chichester, UK,p. 260.
8
-Jennings, J.D., Zink-Sharp, A., Frazier, C.E., and Kamke, F.A., 2006. Properties of compression densified wood, Part II, Surface Energy, J. Adhes. Sci. Technol, 20 (4): 335–344.
9
-Lam, P.S., Lam, P.Y., Sokhansanj, Sh., Bi, X.T., and Lim, C.J., 2013. Mechanical and compositional characteristics of steam-treated douglas fir (Pseudotsuga menziesii L.) during pelletization.Biomass and Bioenergy, 56: 116-126.
10
-Liu, S., 2008. A kinetic model on autocatalytic reactions in woody biomass hydrolysis. J. Biobased Mater. Bio, 2: 135–147.
11
-Metsa-Kortelainen, S., Antikainen, T., and Viitaniemi, P., 2006. The water absorption of sapwood and heartwood of scots pine and norway spruce heat-treated at 170◦C, 190◦C, 210◦C and 230◦C. Holz RohWerkst, 64(3): 192–197.
12
-Mirzaei, Gh., Mohebby, B., and Tabarsa, T., 2012. Collapsibility and Wettability of Hydrothermally Treated Wood. Iranian Journal of Wood and Paper Industries, Vol. 3, No. 1.
13
-Mirzaei, Gh., Mohebby, B., and Tasooji, M., 2012. The effect of hydrothermal treatment on bond shear strength of beech wood. Eur. J. Wood Prod, 70: 705-709.
14
-Mohebby, B., Sharifnia-Dizboni, H., and Kazemi-Najafi, S., 2009. Combined hydro-thermo-mechanical modification (CHTM) as an innovation in mechanical wood modification. In: Proceeding of 4th European Conference on Wood Modification (ECWM4). 27-29th April, Stockholm, Sweden, pp. 353-360.
15
-Navi, P., and Sandberg, D., 2011. Thermo-hydro-mechanical processing of wood, Engineering Sciences, Taylor & Francis Group, LLC, Swiss, p. 360.
16
-Popescu, C.M., and Popescu, M.C., 2013. A near infrared spectroscopic study of the structural modifications of lime (Tilia cordata Mill.) wood during hydro-thermal treatment. Spectrochimica Acta. Part A: Molecular and Biomolecular Spectroscopy, 115: 227–233.
17
-Ramos, L.P., 2003. The chemistry involved in the steam pretreatment of lignocellulosic materials. Quim Nova, 26: 863–871.
18
-Standard methods of testing small clear specimens of timber, American Society for Testing of Materials, ASTM D 143-09, 2014.
19
-Surface Texture: Profile method rules and procedures forthe assessment of surface texture, 1:1158-1159, ISO/DIS 4287.1. 1998.
20
-Thybring, E.E., 2013. The decay resistance of modified wood influenced by moisture exclusion and swelling reduction. International Biodeterioration & Biodegradation,82: 87-95.
21
-Xu, X., and Tang, Z., 2012. Vertical Compression Rate Profile and Dimensional Stability of Surface-Densified Plantation Poplar Wood. Lignocellulose, 1 (1): 45-54.
22
ORIGINAL_ARTICLE
ارزیابی غیرمخرب تاثیر رطوبت و دما بر خواص الاستیک چوب راش با استفاده از آزمون ارتعاش خمشی
در این تحقیق 10 نمونه چوب راش (Fagus orientalis L) با ابعاد 360×16×16 سانتی متر (طولی×شعاعی×مماسی) بدون عیب ظاهری انتخاب و پس از قرار گرفتن در شرایط دمایی (60، 80، 100، 120، 140، 160و 180 درجه سانتیگراد) و رطوبتی متفاوت شامل رطوبت در حالت اشباع از آب (رطوبت تعادل: 5±35 درصد)، رطوبت تعادل در مجاورت هوا (رطوبت تعادل: 5±19 درصد) و رطوبت مشروط سازی شده در اتاق کلیماتیزه (رطوبت تعادل: 2±12 درصد) مورد آزمون ارتعاش خمشی آزاد در دو صفحهی طولی-مماسی و طولی-شعاعی قرار گرفتند. برخی از ویژگیهای فیزیکی، مکانیکی و آکوستیکی در هر دو صفحه مورد بررسی و مقایسه قرار گرفتند. نتایج نشان داد که ضریب همبستگی سه مد اول ارتعاش خمشی در شرایط کلیماتیزه در هر دو صفحه شرایطی مشابه را داشت اما در زمان غوطهور در آب در دو صفحه رفتاری متمایز و مخالف را نشان دادند. اثر افزایش دمای بالای 100 درجه باعث ایجاد تنشهای همکشیدگی شده که این امر منجر به گسترش ترکهای ریز و کاهش مدول الاستیسیته دیواره سلولی شده و در نهایت منجر به کاهش قابلیت چوب در انتشارموج شده که به تبع آن باعث افزایش مقادیر میرایی ارتعاش در صفحات ارتعاشی طولی-شعاعی و طولی-مماسی نمونههای آزمونی گردید. همچنین تغییرات همزمان مدولالاستیسیته و میرایی ارتعاش در هر دو صفحه ارتعاشی میتواند گزینهای بسیار مطلوب جهت کنترل فرآیند از ابتدای استحصال چوب تا قرار گرفتن در پروسههایی مثل چوب خشککنی و تیمارهای گرمایی باشد.
https://ijwpr.areeo.ac.ir/article_107022_f3953eed112801185dc15145d235ca0d.pdf
2017-04-21
13
24
10.22092/ijwpr.2017.107022
رطوبت
حرارت
ارتعاش
کنترل برخط
تئوری تیر تیموشنکو
آکوستیک
مصطفی
کهن ترابی
mostafa.kohantorabi@srbiau.ac.ir
1
دانشجوی دکترای تخصصی، گروه علوم و صنایع چوب و کاغذ، دانشگاه آزاد اسلامی واحد علوم و تحقیقات، تهران
LEAD_AUTHOR
مهران
روح نیا
mehran.roohnia@kiau.ac.ir
2
استاد، گروه علوم صنایع چوب و کاغذ، دانشکده کشاورزی و منابع طبیعی، دانشگاه آزاد اسلامی، واحد کرج
AUTHOR
شادابه
فتحی
shadabeh.fathi@gmail.com
3
دانشجوی کارشناسی ارشد مهندسی علوم صنایع چوب و کاغذ، دانشکده کشاورزی و منابع طبیعی، دانشگاه آزاد اسلامی، واحد کرج
AUTHOR
-Aizawa, H., Eiichi, O., Ono, T., and Norimato, M., 1998. Acoustic converting efficiency and anisotropic nature of wood. Wood Research, 85: 81-83.
1
-Bekhta, P., and Neimz, P., 2003. Effect of high temperature on the change in color dimensional stability and mechanical properties of spurce wood, Holz forschung. 57(5): 539-546.
2
-Bodig, J., Jayne, B.A., 1993. Mechanics of wood and wood composites. Krieger Publishing Co, Malabar Florida. 712 pp.
3
-Bordonné P.A., 1989. Module dynamique et frottement intérieur dans le bois: Mesures sur poutres flottantes en vibrations naturelles Thèse de doctorat de l'INP de Lorraine soutenue à Nancy. 154 p.
4
-Brasha, B., Ross, R., Pellerin, R., 1997. Stres wawe nondestructive evalution of green veneer: Souther yellow pine and Douglas fir. International Society for Optical Engineering, 2994: 296-306.
5
-Brémaud. I., Cabrolier, P., Gril, J., Clair, B., Gérard, J., Minato, K., Thibaut, B., 2010. Identification of anisotropic vibrational properties of Padauk wood with interlocked grain, Wood Science and Technology, 44:355-367.
6
-Bucur V (2006) Acoustics of wood. Springer-Verlag, Berlin, Heidelberg, New York.393pp.
7
-Chan, J.M., 2007. Moisture content in radiata pine wood: Implications for wood quality and water-stress response. PhD Thesis. School of Forestry College of Engineering.University of Canterbury Riccarton, Christchurch, New Zealand. 210pp.
8
-Dündar, T., Kurt, S., As, Nusret., Uysal, B., 2012. Nondestructive evaluation of wood strength using thermal conductivity.BioResources. 7(3): 3306-3316.
9
-Forest Products Laboratory., 1999. Wood Handbook: wood as an engineering material. Gen. Tech.Rep. FPL-113. Madison, WI: USDA Forest Service, Forest Products Laboratory. 463p.
10
-Green, D., Kreschmann, D., 1994. Moisture content and the properties of clear southern pine. Madison, WI: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory. 28p.
11
-Halabe, U., Bidgalu, G., Hota, G., Ross, R. 1995., Nondestractive evalution of green wood using stress wawe and transverse vibration techniques. Materials Evalution, 55(9): 1013-1018.
12
-Hill, C., 2006. Wood modification chemical,thermal and other process. Chichester, England, 260 pp.
13
-Hossein. M.A, Roohnia, M, Shahverdi. M, 2009. Some footprints of wood internal defects on three first mode-shapes of free vibration،16th international symposium on nondestructive testing and evaluation of wood, 2-14 October, Beijing , China: 23-32.
14
-Jody, D., Gray, Shawn T., Grushecky, A., Armstrong, J.P., 2008. Stress wave velocity and dynamic modulus of elasticity of yellow poplar ranging from 100 to 10 percent moisture .Proceedings, 16th central hardwood forest conference. Department of Agriculture, Forest Service, Northern Research Station. IN April 8-9, 2008.pp:139-142.
15
-Kamdem, D. P., Pizzi, A., Jermannaud, A., 2002. Durabillity of heat-treated wood, Holz als Roh-und Wekstoff, 60: 1-6.
16
-Kohantorabi, M., Roohnia, M., 2013. Detection of defects in joints using the variations in dynamic shear modulus and Correlation Coefficient factor in Beech Wood. Iranian Journal of Wood and Paper Science Research, 28(2): 238-257.
17
-Kohantorabi, M., Roohnia, M., Haji Rafeiha, E., and Asgari, A., 2014. Nondestructive evaluation of defects (face to face and end to end joints) with polyvinyl acetate applied adhesive using vibration method. Iranian Journal of Renewable Natural Resourses Research, 4(3): 21-34.
18
-Kohantorabi, M., Hossein, M.A, Shahverdi, M., Roohnia, M., 2015. Vibration Based NDT Methods to Verify Wood Drying Efficiency. DRVNA INDUSTRIJA, 66 (3): 221-228.
19
-Korkut, S., Akgul, M., Dundar, T. 2008. The effect of heat treatment on some technological properties of scots pine (pinus sylvestries L.) wood, BioResource. 99:1861-1868.
20
-Kretschmann, D., Green, D., 1996. Modeling Moisture content-mechanical property relationships for clear southern pine. Wood and Fiber Science, 28(3): 320-337.
21
-Kubojima, Y., Suzuki, Y., Tonosaki, M., 2005. Vibrational Properties of Green Wood in High Temperature Water Vapor; Holzforschung. 59: 446-450.
22
-Llana, D.F., Gonzalez, G.I., Francisco, A., Niemz, P. 2013. Influence of Temperature and Moisture Content in Non-destructive values of Scots pine (Pinus sylvestris L). Proceedings 18th International Nondestructive Testing and Evaluation of Wood Symposium. Madison, Wisconsin, USA. September 24-27. 2013. Pp: 451-457.
23
-Matan, M., Buhnnum, K. 2003. Effect of moisture content on some physical and mechanical properties of juvenile rubberwood (Hevea brasiliensis Muell. Arg). Songklanakarin Journal Science Technology, 25(3):328-340.
24
-Obataya, E., Norimoto, M., 1999. Acoustic properties of a reed (Arundo donax L.) used for the vibrating plate of a clarinet, Journal of Acoustical Society of America, 106 (2): 1106-1110.
25
-Ohsaki, H., Kubojima Y., Tonosaki M. & Ohta M., 2006. Vibrational Properties of wetwood of todomatsu (Abies sachalinesis) at high temperature. Journal of Wood Science. 53(2): 134-138
26
-Perré, P.; Roger, B. K., 2006. Drying of Wood: Principles and Practices. Taylor and Fransis group, LLC, 57 p.
27
-Roohnia, M., Yavari, A. Tajdini, A., 2009. Elastic Parameters of Poplar Wood with End-Cracks. Annals of Forest Science, 26 (2): 141-153.
28
-Roohnia, M., Kohantorabi, M., Jahan-Latibari, A., Tajdini, A. and Ghaznavi, M., 2012. Nondestructive assessment of glued joints in timber applying vibration-based methods. European Journal of Wood and Wood Products, 70: 791-799.
29
-Segolpayegani, A., Brémaud, I., Gril, J., Thevenon, M.F. and Pourtahmasi, K., 2012. Effect of extractions on dynamic mechanical properties of white mulberry (Morus alba). Journal of Wood Science, 58(2):153-162
30
-Silva, D.A.L., Lahr, F.A.R., Faria, O.B., Eduardo, C., 2012. Influence of Wood Moisture Content on the Modulus of Elasticity in Compression Parallel to the Grain. Materials Research, 15(2): 300-304
31
-Skaar, C., 1998. Wood-Water Relations, Springer-Verlag, Berlin, Heidelberg, New York. 291pp.
32
-Yang, X., Ishimaru, Y., Iida, I. Urakami, H., 2002. Application of modal analysis by transfer function to nondestructive testing of wood I: Determination of localized defects in wood by shape of the flexural vibration wave. Journal of Wood Science, 48: 283–288.
33
ORIGINAL_ARTICLE
تعیین معادله سرعت واکنش لیگنین زدایی صنوبردلتوییدس
با توجه به اهمیت و کاربرد فراوان چوب گونههای مختلف صنوبر در تولید خمیر کاغذ، واکنش لیگنینزدایی در فرایند تولید خمیر کاغذ از چوب صنوبردلتوییدس، مورد بررسی قرار گرفت تا رابطه میان غلظت لیگنین باقیمانده در خمیر کاغذ با زمان پخت، بدست آید. بدین منظور نمونههای سه اصله درخت 10 ساله صنوبردلتوییدس از ایستگاه تحقیقات چمستان واقع در شهرستان نور استان مازندران جمعآوری گردیدند. خمیرهای کاغذ به روش کرافت با سولفیدیته 25 درصد، قلیائیت 14 درصد، نسبت مایع پخت به ماده اولیه 1 : 5، سه درجهحرات بیشینه پخت 155 و 165 و 175 درجه سانتیگراد تهیه گردیدند. عدد کاپا و بازده خمیرها، تعیین و درصد لیگنین باقیمانده در خمیر کاغذ برای هر نمونه محاسبه شد. سپس با استفاده از مدلهای ارائه شده برای معادله سرعت، به روش حدس و خطا و به کمک نرمافزار اِکسِل، درجه و ثابت سرعت واکنش لیگنینزدایی، برای هر درجهحرارت پخت، بدست آمد. نتایج بدستآمده نشان میدهند که معادلههای سرعت واکنش لیگنینزدایی صنوبردلتوییدس در درجه-حرارتهای 155 و 165 و 175 درجه سانتیگراد، بهترتیب دارای درجههای 5/5 و 5/2 و 1 و ثابتهای سرعت 7-10× 8/1 برحسب (دقیقه) 1- × (غلظت) 5/4- و 4-10× 7/7 برحسب (دقیقه) 1- × (غلظت) 5/1- و 3-10× 5/3 برحسب (دقیقه) 1- میباشند. با استفاده از این معادله ها، امکان کنترل فرایند خمیرسازی، فراهم شده و می توان زمان مناسب برای رسیدن به غلظت مشخصی از لیگنین باقیمانده در خمیر را پیشبینی نمود.
https://ijwpr.areeo.ac.ir/article_107119_9263ce63bffb1fccac8735792d4d6244.pdf
2017-04-21
25
32
10.22092/ijwpr.2017.107119
صنوبردلتوییدس
خمیر کاغذ
لیگنین زدایی
سرعت واکنش
محمد مهدی
برازنده
mbaraz@rifr-ac.ir
1
استادیار، بخش تحقیقات علوم چوب و فراورده های آن، مؤسسه تحقیقات جنگل ها و مراتع کشور، سازمان تحقیقات، آموزش و ترویج کشاورزی، تهران، ایران
LEAD_AUTHOR
سعید
مهدوی
mahdavi43@gmail.com
2
دانشیار پژوهشی، بخش تحقیقات علوم چوب و فراورده های آن، مؤسسه تحقیقات جنگل ها و مراتع کشور، سازمان تحقیقات، آموزش و ترویج کشاورزی، تهران، ایران
AUTHOR
عباس
فخریان
fakhryan@rifr-ac.ir
3
کارشناس ارشد، بخش تحقیقات علوم چوب و فراورده های آن، مؤسسه تحقیقات جنگل ها و مراتع کشور، سازمان تحقیقات، آموزش و ترویج کشاورزی، تهران، ایران
AUTHOR
-Barazandeh, M.M and A. Fakhryan, 2011. Evaluating the Rate Equations of Delignification Reaction of Bagasse in Soda Pulping. Iranian Journal of Wood and Paper Science Research. Vol. 26, No. 1 (34); PP. 72-82.
1
-Epelde,G., Lindgren, I.C.T. and Lindstrom, M.E. ,1998. Kinetics of Wheat Straw Delignification in Soda and Kraft Pulping. Journal of Wood Chemistry and Technology, 18(1), 69-82.
2
-Fakhryan, A.; Hosseinzadeh, A.; Golbabaei, F. and H. Hosseinkhani, 2002. Investigation of delignification and paper making characteristics of Populus deltoids (col.77/51) grown under three rotations. Iranian Journal of Wood and Paper Science Research. Vol. 16.; PP. 1-28.
3
-Guolin, H.; Chengfang, Z. and C. Zhongsheng, 2006. Pulping of Wheat Straw with Caustic Potash- Ammonia Aqueous Solutions and It,s Kinetics. Chinese J. Chem. Eng., 14(6) 729-733.
4
-Http://WWW.radiometer-analytical.com/news/en.,2006.Kappa Number Determination of Paper Pulp.
5
-Ji, Y.; Vanska, E. and A. Van Heningen, 2009. Rate Determination Step and Kinetics of Oxygen Delignification. Pulp and Paper CANADA.
6
-Levenspiel, O., 1998. Chemical Reaction Engineering (2nd Edition).
7
-Li,Z. ; Li,J , Kubes, G.J.,2002. Kinetics of Delignification and Cellulose Degradation during Kraft Pulping with Polysulphide and Anthraquinone, Journal of Pulp and Paper Science,Vol. 28(7).
8
-Lindgren, C.T. and Lindstrom, M.E.,1998. Journal Wood Chemistry and Technology, 18(1): 69-82.
9
-Martin P. Kwasniews Ki, Hans Theliander and Maryam Mahmoudkhani,2000. Introductory Study of the Combined Effect of Transport Phenomena and Chemical Kinetics on the delignification rate in wood chips, Forests Products Division Papers at the AICHE 2000 Annual Meeting.
10
-Sabatier, J., Peniche, C.F.,1993. Soda Pulping of Bagasse Delignification Phases and Kinetics. HOLZFORSCHUNG, (47) 313-317.
11
-Sarwar Jahan, M. Khalidul Islam,M. AJM Mounl Hasan , Nasima Chowwdhury, D.A.,2000. Investigation on Soda and Soda-Anthraquinone(AQ) Pulping of Saccharum spontaneum.
12
-TAPPI T 222 om-98, 1998. Acid-insoluble lignin in wood and pulp.
13
ORIGINAL_ARTICLE
ارزیابی تاثیر اصلاح شیمیایی با Polycrease ECR بر ویژگی های کاربردی چوب پلیمر صنوبر
در این پژوهش ارزیابی تأثیر اصلاح شیمیایی با Polycrease ECR بر ویژگیهای کاربردی چوب صنوبر باهدف استفاده بهعنوان چوب- پلیمر موردبررسی قرار گرفت. فرایند اصلاح شیمیایی چوب به روش آغشته سازی با Polycrease ECR در دو سطح وزنی 30 و 50 درصد، مدتزمان 24 ساعت و درجه حرارت 120 درجه سانتیگراد انجام گرفت. ویژگیهای کاربردی شامل درصد افزایش وزن، تورم حجمی، جذب آب و واکشیدگی حجمی طولانیمدت (8 هفته)، مقاومت به خمش و مدول الاستیسیته، فشار موازی الیاف، مقاومت برشی و مقاومت انفصالی پیچ موازی الیاف مطابق با استاندارد ASTM اندازهگیری شدند. پردازش آماری دادهها با روش تحلیل واریانس دوگانه (ANOVA) در قالب طرح کاملاً تصادفی صورت گرفت. نتایج حاصل از اندازهگیری مقاومت نمونههای اصلاحشده با نمونههای شاهد مقایسه گردیدند. نتایج نشان داد که اصلاح شیمیایی با Polycrease ECR تأثیر معنیداری بر خواص فیزیکی و مکانیکی نمونههای تیمار شده نسبت به نمونههای شاهد داشته است. میزان مقاومت مکانیکی نمونههای شاهد نسبت به نمونه اصلاحشده بیشتر بود. اصلاح شیمیایی در سطح 30 درصد باعث کاهش جذب آب و واکشیدگی حجمی طولانیمدت شد. کاهش مقاومتهای مکانیکی قابلملاحظه نبود. مشاهده شد که اصلاح شیمیایی با Polycrease ECRدر سطح 30 درصد در مقایسه با 50 درصد، خواص فیزیکی و مکانیکی بالاتری داشته است. بهطورکلی، بیشترین تأثیر اصلاح شیمیایی با Polycrease ECR در خواص فیزیکی نمونهها (درصد جذب آب و واکشیدگی حجمی طولانیمدت) مشاهده گردید.
https://ijwpr.areeo.ac.ir/article_107063_97b1c15d7cab01297b8bd31de0c77b12.pdf
2017-04-21
33
46
10.22092/ijwpr.2017.107063
اصلاح شیمیایی
چوب- پلیمر
Polycrease ECR
ویژگیهای کاربردی
صنوبر
آیسونا
طلائی
talaei.srttu@gmail.com
1
استادیار گروه علوم و صنایع چوب، دانشکده مهندسی عمران، دانشگاه تربیت دبیر شهید رجائی، تهران
LEAD_AUTHOR
محمدهادی
رضوانی
rezvani_h@yahoo.com
2
دانش آموخته کارشناسی ارشد، گروه علوم و صنایع چوب، دانشکده مهندسی عمران، دانشگاه تربیت دبیر شهید رجائی، تهران.
AUTHOR
- Adamopoulos, S., Hosseinpourpia, R., & Mai, C., 2015. Tensile strength of handsheets prepared with macerated fibres from solid wood modified with cross-linking agents. Holzforschung, 69(8), 959-966.
1
- Akhtari, M,. Ghorbani Kokandeh, M., Taghiyari, H.R., 2015. Study on the physical and mechanical properties of paulownia wood impregnated with nanosilver and nanocopper. J. of Wood & Forest Science and Technology, Vol. 21 (4), 147-159.
2
- Baysal, E., Yalinkilik, M. K., Altinok, M., Sonmez, A., Peker. H., and Colak, M., 2007. Some physical, biological, mechanical, and fire properties of wood polymer composite (WPC) pretreated with boric acid and borax mixture. Construction and Building Materials, (21): 1879–1885.
3
- Bollmus, S., 2011. Biologische und technologische Eigenschaften von Buchenholz nach einer Modifizierung mit 1, 3-dimethylol-4, 5-dihydroxyethyleneurea (DMDHEU). PhD dissertation, Georg-August-Universitat Goettingen,
4
- Chao, W.Y., and Lee, A.W., 2003. Properties of Southern pine wood impregnated with styrene. Holzforschung, 57(3): 333-336.
5
- Dieste, A., 2009. Wood-water relationships in wood modified with 1, 3-dimethylol-4, 5-dihydroxy ethylene urea (DMDHEU). PhD dissertation, Georg-August-Universitat Goettingen, Germany.
6
- Dieste, A., Krause, A., Bollmus, S., & Militz, H., 2008. Physical and mechanical properties of plywood produced with 1.3-dimethylol-4.5-dihydroxyethyleneurea (DMDHEU)-modified veneers of Betula sp. and Fagus sylvatica. Holz als Roh-und Werkstoff, 66(4), 281-287.
7
- Esteves, B.; Nunes, L.; Pereira, H., 2009. Furfurylation of Pinus pinaster Wood. In: Englund F, Hill CAS, Militz H, Segerholm BK (Hg.) The Fourth European Conference on Wood Modifiation. 4th European Conference on Wood Modifiation, Stockholm, 415-418.
8
- Hill CAS., 2006 Wood modification. Chemical, thermal and other processes. John Wiley & Sons Ltd., Chichester, pp 239.
9
- Jani, M., Rozman, D., and Rahim., 2007. Rubber wood-polymer Composites: The Effect of Chemical impregnation on the Mechanical and Physical Properties. Malaysian Polymer Journal, 2(2): 1-11.
10
- Jiang, T., Gao, H., Sun, J., Xie, Y., & Li, X., 2014. Impact of DMDHEU resin treatment on the mechanical properties of poplar. Polymers & Polymer Composites, 22(8), 669.
11
- Kaki, R., & Ghorbani, M., 2013. Investigation of Water Absorption and Dimensional Stability of Beech Impregnated With Methylmethacrylate. Journal of Forest and Wood Products (JFWP) (Iranian Journal of Natural Resources), 329-338.
12
- Kong, M. T., Lim, T. W., Król, P., Auriga, R., & Mamiński, M. Ł., 2015. 1, 3-Dimethylol-4, 5-dihydroxyethyleneurea as a Potential Alternative Binder for Plywood. The Journal of Adhesion, (just-accepted).
13
- Krause A, Wepner F, Xie Y, Militz H., 2008. Wood protection with dimethyloldihydroxy-ethyleneurea and its derivatives. In: Schultz TP, Militz H, Freeman MH, Goodell B, Nicholas DD (eds) Development of commercial wood preservatives. Efficacy, environmental, and health issues. American Chemical Society, Washington DC, pp 356–371.
14
- Lande, S.; Westin, M.; Schneider, M., 2004. Properties of furfurylated wood. Scandinavian Journal Forest Research 19(5): 22-30.
15
- Li, Y.; Dong, X.; Lu, Z.; Jia, W., and Liu, Y., 2012. Effect of polymer in situ synthesized from methyl methacrylate and styrene on morphology, thermal behavior and durability of wood. Journal of Applied Polymer Science, 128(1), 13-20.
16
- Lopes, D. B., Mai, C., & Militz, H., 2015. Mechanical properties of chemically modified portuguese pinewood. Maderas. Ciencia y tecnología, 17(1), 179-194.
17
- Lopes, D. B., May, C., & Militz, H., 2013. Physical properties of Portuguese pinewood chemically modified. Ciência & Tecnologia dos Materials, 25(2), 121-128.
18
- Militz, H., & Norton, J., 2013. Performance testing of DMDHEU-modified wood in Australia. International Research Group on Wood Protection IRG/WP 13-30613, Stockholm, Sweden.
19
- Omidvar, A,. 2009. Wood-polymer composite. Gorgan University of Agricultural sciences and Natural Resources, 127p.
20
- Rowell, R.M., 2005 a. Chemical modification of lingo-cellulosic materials. Marcel Dekker, New York, pp 77-98.
21
- Rowell, R.M., 2005 b. Handbook of wood chemistry and wood composites: blends and composites, Chapter
22
14 Chemical Modifiation Wood. Edited by Stoyko Fakirov, Debes Bhattacharyya, ISBN 978-3-446-40591-2.
23
- Schneider, M.H., & Phillips., J.G., 1996. Wood polymer composites improving woods’ natural virtues by polymer impregnation. Wood and fiber science 26(1), pp: 142-151.
24
- Schneider, M.H., & Phillips, J.G., 2000. Physical properties of wood polymer composites. J. Forest Engineering 11:1, 83- 89.
25
- Schneider, M.H., & Phillips, J.G., Tingley, D.A., & Brebner, K.I., 1990. Mechanical properties of polymer impregnated maple. For. Prod. J. 40(1): 37- 41.
26
- Talaeepour, S., and Omidvare, A., 2008. Investigation of physical properties wood polymer composites from palownia, aspen, maple, hornbeam speiec. Journal of Pajouhesh and sazandegi, (77): 85-91.
27
- Trinh, H. M., Militz, H., & Mai, C., 2012. Modification of beech veneers with N-methylol-melamine compounds for the production of plywood. European Journal of Wood and Wood Products, 70(4), 421-432.
28
- Verma, P., Junga, U., Militz, H., & Mai, C., 2009. Protection mechanisms of DMDHEU treated wood against white and brown rot fungi. Holzforschung,63(3), 371-378.
29
- Winandy JE, Rowell R., 2005. Chemistry of wood strength. In: Rowell R (ed) Handbook of wood chemistry and wood composites. Taylor & Francis, Boca Raton London New York Singapore, pp 303–347.
30
- Xie Y, Krause A, Militz H, Turkulin H, Richter K, Mai C., 2007. Effect of treatments with 1.3-dimethylol-4,5 dihydroxyethyleneurea (DMDHEU) on the tensile properties of wood. Holzforschung 61(1):43–50.
31
- Xie, Y., Xiao, Z., Grüneberg, T., Militz, H., Hill, C. A., Steuernagel, L., & Mai, C., 2010. Effects of chemical modification of wood particles with glutaraldehyde and 1, 3-dimethylol-4, 5-dihydroxyethyleneurea on properties of the resulting polypropylene composites. Composites Science and Technology,70(13), 2003-2011.
32
- Yildiz, Ü. C., Yildiz, S., & Gezer, E. D., 2005. Mechanical properties and decay resistance of wood–polymer composites prepared from fast growing species in Turkey. Bioresource technology, 96(9), 1003-1011.
33
- Zahedi tajrishi, A., and Omidvar, A., 2007. Resistance of Poplar wood polymer composites against Coriolus versicolor fangus. Journal of Agricultural Science and Natural Resource. 14(1): 81-90.
34
ORIGINAL_ARTICLE
ارزیابی ویژگیهای مکانیکی چندسازه الیاف کارتن کنگره ای کهنه – پلیپروپیلن تقویتشده با نانولولههای کربنی
در این پژوهش اثر نانولولههای کربنی چند دیواره (فراوریشده و فراوری نشده) بر ویژگیهای مکانیکی چندسازه ساختهشده از الیافکارتن کنگره ای کهنه - پلیپروپیلن شامل 20% الیافکارتن کنگره ای کهنه، 80% پلیپروپیلن و صفر یا 3% مالئیک انیدرید پلیپروپیلن مورد بررسی قرار گرفته است. نانولوله کربنی چند دیواره فراوری نشده و فراوریشده در 3 سطح 0 ، 5/0 و 1 درصد مورداستفاده قرارگرفته است. برای فراوری کردن نانولولههای کربنی از روش اکسیداسیون اسیدی(مخلوط اسید سولفوریک و اسید نیتریک) استفاده شد. ویژگیهای مکانیکی چند سازه بر اساس دستورالعمل های ASTM اندازه گیری شده است. نتایج نشان داد که با افزایش میزان نانولوله های کربنی ویژگی های کششی افزایش یافته ولی تاثیر فراوری نانولوله کربنی تاثیر معنی داری نداشته است. تاثیر افزودن نانولوله کربنی بر ویژگی های خمشی در سطح اعتماد آماری 99% معنی دار شده است و در اثر افزودن مقادیر زیادتر این ماده هر دو ویژگی مدول الاستیسیته خمشی و مقاومت خمشی زیاد شده است. مقاومت به ضربه نمونه ها نشان می دهد که در اثر زیاد شدن نانو لوله کربنی و مقدار جفت کننده این ویژگی افزایش می یابد. فراروی نانولولههای کربنی باعث بهبود بعضی مقاومتهای مکانیکی شده است. عکسبرداری با میکروسکوپ الکترونی روبشی تقویت اتصال بین اجزای تشکیل دهنده چند سازه را نشان می دهد. در چند سازه های بدون مواد جفت کننده، به دلیل اتصال ضعیف بین الیاف و پلی پروپیلن، این الیاف بدون شکسته شدن از ملات پلاستیک خارج شده اند. ولی در نمونه های حاوی جفت کننده، گسیختگی در الیاف مشاهده می گردد.
https://ijwpr.areeo.ac.ir/article_107064_c364e079b36eabfcb79cc0a18e673f39.pdf
2017-04-21
47
56
10.22092/ijwpr.2017.107064
چندسازه
نانولوله کربنی
میکروسکوپ الکترونی
ویژگیهای مکانیکی
الیافکارتن کنگره ای کهنه
احمد
جهان لتیباری
latibari.aj@gmail.com
1
استاد، گروه علوم و صنایع چوب و کاغذ، دانشگاه آزاد اسلامی واحد کرج، کرج، ایران،
LEAD_AUTHOR
روزبه
آبیدنژاد
roozbeh.abidnejad@gmail.com
2
گروه علوم و صنایع چوب و کاغذ دانشگاه آزاد اسلامی واحد کرج رجایی شهر - کرج - ایران
AUTHOR
مهران
روح نیا
mroohnia@gmail.com
3
گروه علوم و صنایع چوب و کاغذ، دانشگاه آزاد اسلامی واحد کرج، کرج، ایران
AUTHOR
-Ahmed, D.S., Haider, A.J. and Mohammad, M.R. 2013. Comparison of functionalization of multi-walled carbon nanotubes treated by olive oil and nitric acid and their characterization. Energy Procedia 36, 1111-1118.
1
-American Society of Testing and Material, 2014. ASTM annual book of testing methods, no. 10. Philadelphia, PA., USA.
2
-Bikiaris, D., Vassiliou, A., Chrissafis, K., Paraskevopoulos, K.M., Jannakoudakis, A., Docoslis, A., 2008. Effect of acid treated multi-walled carbon nanotubes on the mechanical, permeability, thermal properties and thermo-oxidative stability of isotactic polypropylene. Polymer Degradation and Stability, 93; 952- 967.
3
-Huang, J., Rodrigue, D., 2013. The effect of carbon nanotube orientation and content on the mechanical properties of polypropylene based composites. Materials and Design, 55; 653-663.
4
-Madeshwaran, S.R., Kwon, J.K., Cho, J.W. Functionalized multi-walled Carbon Nanotubes with Heyperbranched Aromatic Polyamide for Poly (methyl methacrylate)composites. Fibers and Polymers. 2013. Vol14. No2. 182-187
5
-Mahajan, A., Kingon, A., Kukovecz, A., Konya Z., Vilarinho, P.M., 2013. Studies on the thermal decomposition of multiwall carbon nanotubes under different atmospheres. Materials Letters. 90; 165- 168.
6
-May-Pat, F.A., Yazdani-Pedram, M., Cauich-Rodriguez, J.V., 2011. Mechanical properties ofPET composites using multi-walled carbon nanotubes functionalized by inorganic and itaconic acids. Express Polymer Letters. Vol.6. No 2. (2012); 96-106
7
-Osorio, A.G., Silveira, I.C.L., Bueno, V.L., Bergman C.P. 2008. H2SO4/HNO3/HCL – Functionalizanion and its effect on dispersion of carbon nanotubes in aqueous media. Applied Surface Science, 225; 2485-2489
8
-Rahmanian,S., Suraya,A.R., Shazed,M.A., Zahari,R., Zainudin,E.S., 2013. Mechanical characterization of epoxy composite with multiscale reinforcements: Carbon nanotubes and short carbon fibers. Materials and Design,60; 34-40.
9
-Sahoo, N.G., Rana, S., Cho, J.W., Li, L., Chan, S.H., 2010. Polymer nanocomposites based on functionalized carbon naotubes. Prog in polymer Sci,35; 837- 867.
10
-Shimamura, Y., Oshima, K., Tohgo, K., Fujii, T., Sirasu, K., Yamamoto, G., Hashida, T., Goto, K., Ogasawara, T., Naito, K., Nakano, T., Inoue, Y., 2013. Tensile mechanical properties of carbon nanotube/epoxy composite fabricated by pultrusion of carbon nanotube spun yarn perform. Composites: Part A,62; 32-38.
11
-Stobinski, L., Lesiak, B., Kover, L., Toth, J., Biniak, S., Trykowski, G., Judek, J.,2010. Multiwall carbon nanotubes purification and oxidation by nitric acid studied by the FTIR and electron spectroscopy methods. Journal of Alloys and compounds.501; 77-84.
12
ORIGINAL_ARTICLE
تأثیر تشکیل چندلایه های نشاسته کاتیونی- آنیونی بر روی الیاف CMP بر ویژگی های خمیر و کاغذ
این پژوهش با هدف بررسی اثر تشکیل چندلایههای پلیمری از نشاسته کاتیونی و نشاسته آنیونی بر روی الیاف CMP با تکنیک لایهنشانی لایه به لایه بر خواص خمیرکاغذ و کاغذهای تهیهشده از آن انجام شد. آزمایشهای لایهنشانی یک در میان نشاستههای کاتیونی و آنیونی (بهترتیب با مصرف 1% و 5/0 درصد بر اساس وزن خشک الیاف)؛ با 10 دقیقه زمان لایهنشانی، برای تشکیل یک تا پنج لایه متوالی نشاستههای یونی بر روی الیاف CMP انجام شد. ویژگیهای خمیرکاغذ از جمله: درجه روانی، شاخص نگهداری آب و پتانسیل زتا اندازهگیری شد. سپس از این خمیرکاغذ، کاغذهای دست ساز با وزن پایه 60 گرم بر مترمربع تهیه و خواص آن مورد ارزیابی قرارگرفت. تغییرات متوالی پتانسیل زتا تشکیل لایههای متوالی نشاستهها بر روی الیاف CMP را تأیید می-کند. بهعلاوه، با افزایش تعداد لایههای تشکیلشده شاخص نگهداری آب و میزان درجه روانی خمیرکاغذ افزایش یافت. نتایج ارزیابی ویژگیهای کاغذ تهیهشده نشان داد که خواص پیوندپذیری بین الیاف از جمله شاخص مقاومت به کشش و شاخص مقاومت به ترکیدن افزایش قابل ملاحظهای یافته است. تصاویر الکترونی تهیهشده بر ایجاد پیوندهای بیشتر بین الیاف به سبب جذب بیشتر نشاسته کاتیونی تأکید دارد.
https://ijwpr.areeo.ac.ir/article_107066_677b98af8b91db0fb63641d446d2784f.pdf
2017-04-21
57
68
10.22092/ijwpr.2017.107066
تکنیک لایه به لایه
نشاسته کاتیونی
نشاسته آنیونی
ویژگیهای مقاومتی
پتانسیل زتا
شاخص نگهداری آب
حمیدرضا
رودی
h_rudi@sbu.ac.ir
1
استادیار، گروه مهندسی فناوری تولید سلولز و کاغذ، دانشکده مهندسی انرژی و فناوریهای نوین، دانشگاه شهید بهشتی، زیراب، ایران
LEAD_AUTHOR
حسیبه
سعیدی
hasibeh.saedi@gmail.com
2
دانشجوی کارشناسی ارشد گروه مهندسی فناوری سلولز و کاغذ، دانشکده مهندسی انرژی و فناوریهای نوین، دانشگاه شهید بهشتی
AUTHOR
-Agarwal, M., Lvov, Y. and Varahramyan, K., 2006. Conductive wood microfibres for smart paper through layer-by-layer nanocoating. Nanotechnology, 17: 5319–5325.
1
-Agarwal,M., Xing, Q., Shim, B., Kotov, N., Varahramyan,K. and Lvov,Y., 2009. Conductive paper from lignocellulose wood microfibers coated with a nanocomposite of carbon nanotubes and conductive polymers. Nanotechnology, 20(21): 215602-215610.
2
-Bertrand, P., Jonas, A., Laschewsky, A. and Legras, R., 1999. Ultrathin polymer coatings by complexation of polyelectrolytes at interfaces: suitable materials, structure and properties. Macromolecular Rapid Communications, 1999: 21: 319.
3
-Brancato, A.A. 2008. Effect of progressive recycling on cellulose fiber surface properties, Doctor of philosophy thesis, Georgia institute of technology, School of chemical and bimolecular engineering, Georgia, USA.
4
-Chi, H., Li, H., Liu, W. and Zhan, H., 2007. The retention and drainage aid behavior of quaternary chitosan in papermaking system. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 297: 147–153.
5
-Decher, G., Hong, J.D. and Schmitt, J., 1992. Buildup of ultrathin multilayer films by a self-assembly process. III: Consecutivelyalternating adsorption of anionic and cationic polyelectrolyte on charged surface, Thin solid film, 210: 831–835.
6
-Eriksson, M., Notley, S.M. and Wagberg, L., 2005. The influence on paper strength properties when building multilayers of weak polyelectrolytes onto wood fibers. Journal of Colloid and Interface Science, 292: 38-45.
7
-Fleer, G.J., Cohen Stuart, M.A., Scheutjens, J.M.H.M., Cosgrove, T. and Vincent, B., 1993. Polymers at interfaces. Chapman and Hall, London, UK, 502P.
8
-Hongta, Y., 2008. Fundamentals, Preparation and characterization of super hydrophobic wood fiber products, Ph.D. thesis of Paper Science and Engineering, School of Chemical and Bimolecular Engineering, Georgia Institute of Technology, Georgia, USA.
9
-Hubbe, M.A. 2005. Micro and Nanoparticles in Papermaking, J. M. Rodriguez (ed.), TAPPI Press, Atlanta, GA, USA, 197p.
10
-Hubbe, M., 2006. Bonding between cellulosic fibers in the absence and presence of dry-strength agent-A review. BioResource, 1(2): 281-318.
11
-Katz, S., Liebergott, N. AND Scallan, A.M., 1981. A mechanism for the alkali strengthening of mechanical pulps. Tappi journal, 64(7): 97-100.
12
-Law, K.N., Lvalade, J. and Quan, J., 1996. Effect of recycling on papermaking properties of mechanical and high yield pulps, Tappi Journal, 79(3): 167-174.
13
-Lvov, Y.M., Grozdits, G.A., Eadula, S., Zheng, Z. and Lu, Z., 2006. Layer-by-layer nanocoating of mill broken fibers for improved paper. Nordic pulp and paper Research Journal, 21: 552-557.
14
-Maurer, H., 2009. Starch: Chemistry and Technology. Third Edition. Chapter18: Starch in the paper industry. Elsevier Inc. New York, USA, 48p.
15
-Page, D.H., 1969. Theory for the tensile strength of paper. Tappi journal, 52(4): 674-681.
16
-Roberts, J.C., Au, C.O., Clay, G.A. and Lough, C., 1986. The effect of C-labelled14 cationic and native starches on dry strength and formation. Tappi Journal, 69(10): 88-93.
17
-Ryu, J., 2009. Properties of handsheet made of multilayered fibers with polyelectrolytes at different pH and conductivity. PhD thesis, Department of forest sciences, College of Agriculture and life sciences, Seul national university, Korea.
18
-Van de Steeg, H.G.M., 1992. Cationic starches on cellulose surfaces: A study of polyelectrolyte adsorption. Ph.D. Thesis, University of Wageningen, USA.
19
-Wagberg, L., Forsberg, S., Johansson, A. and Juntti, P., 2002. Engineering of Fiber Surface Properties by Polyelectrolyte Multilayer Concept. Journal of Pulp and Paper Science, 28: 222-229.
20
-Wang, F. and Martin, H., 2002. Charge properties of fibers in the paper mill environment. 1. Effect of electrical conductivity, Journal of pulp and paper science, 28: 347-353
21
-Wistara, N. and Young, R.A., 1999. Properties and treatments of pulps from recycled paper, Part: Physical and chemical properties of pulps. Cellulose, 6(4): 291-324.
22
-Wistrand, I., Lingstrom, R. and Wagberg, L., 2007. Preparation of electrically conducting cellulose fibers utilizing polyelectrolyte multilayers of poly (3, 4-ethylenedioxythiophene): poly (styrene sulphonate) and poly (allyl amine). European Polymer Journal, 43: 4075-4091.
23
-Xing, Q., Eadula, S.R. and Lvov, Y.M., 2007. Cellulose Fiber-Enzyme Composites Fabricated through Layer-by-Layer Nanoassembly. Biomacromolecules, 8(6): 1987-1991.
24
-Youn, H., Chin, S., Ryu, J. and Kwon, H., 2007. Basic study on electrochemical properties of multilayered pulp fibers with polyelectrolytes. Journal of KTAPPI, 40(3): 53-60.
25
-Zakrajsek, N., Knez, S., Ravnjak, D. and Golob, J., 2009. Analysis of Modified Starch Adsorption Kinetics on Cellulose Fibres via the Modified Langmuir Adsorption Theory. Chemical and biochemical engineering quarterly, 23 (4): 461–470.
26
ORIGINAL_ARTICLE
بررسی سفتی ساختار خرپاهای چوبی به روش عناصر محدود
هدف در این تحقیق بررسی تاثیر ساختار سازه خرپا بر سفتی و توزیع تنش در عضوهای سازه خرپا است. به این منظور نمونه هایی در 11 ساختار و چهار4 تکرارکه در مجموع 44 نمونه خرپا با چوب صنوبر_تبریزی ساخته و همزمان از دو اتصال مفصلی توسط چسب چوب و اتصال اصطکاکی توسط میخ استفاده شد. برای محاسبه مقاومت خرپاها ابتدا سازه ها توسط دستگاه آزمون مکانیکی با سرعت 12/5 میلیمتر بر ثانیه و 3/5 کیلونیوتن بارگذاری و نتایج آزمون مکانیکی نشان داد، خرپای هیپگیردر بیشترین مقاومت، کمترین توزیع تنش را دارا بوده و تأثیر ساختار خرپا بر روی مقاومت و توزیع تنش در عضوهای آن در سطح 95% معنی دار است. برای نشان دادن توزیع تنش بر روی عضوها از روش اجزاء محدود و نرم افزارهای مدل سازی، اتوکد و کتیا و نرم افزار انسیس جهت تحلیلی عناصر محدود استفاده و نتایج حاکی از آن است که تمرکز تنش حداکثر، در تعامل با شکست در حالت تجربی می باشد.
https://ijwpr.areeo.ac.ir/article_107116_d2bb517889d7da4f11af9518dd8f4a98.pdf
2017-04-21
69
82
10.22092/ijwpr.2017.107116
خرپا
آزمون مکانیکی
اتصال مفصلی
اتصال اصطحکاکی
روش عناصرمحدود
اخسان
کتابی
ehsanketabi@live.com
1
دانشجوی کارشناسی ارشد مهندسی صنایع چوب و کاغذ، دانشکده کشاورزی و منابع طبیعی، دانشگاه آزاد اسلامی، واحد کرج، مهرشهر
AUTHOR
امیر
لشگری
amir.lashgari@kiau.ac.ir
2
دانشیار گروه مهندسی صنایع چوب و کاغذ، دانشکده کشاورزی و منابع طبیعی، دانشگاه آزاد اسلامی، واحد کرج، مهرشهر
LEAD_AUTHOR
1)Arguelles (2003). Estructura de Madera. Diseno Calculo[Timber structures. Design and Calculus.]. Asociacion de Investigacion Tecnica de las lndustrias de la Madera Corcho, Madrid (AITIM), Spain.
1
2)Ellegaard (2006). Finite-element modeling of timber joints with punched, metal plate fasteners. Journal of Structural Engineering, 132(3), 409417.
2
3)Freilingor (1997). Cyclic Performance of Wood Truss Joints. Proct: Structural Congress XV AM. Society of Civil Engineer, Restart, VA, , 939943.
3
4)Hektor, Full Size Truss Joints Made of Old Wood: Laboratory Tests on Shear Failures. ICOMOS IWC-XVI International Symposium-Florence, Venice .2047.4
4
5)Kent (1997). Dynamic Behavior of Metal Plate Connected Wood Truss Joint. Journal of Structural Engineering , 123 (8): 1037-1043.
5
6)Stehn (2004). The influence of nail ductility on the load capacity of a glulam truss structure. Engineering Structures, 26(6), 809-816.
6
7)Xu (2009). Numerical 3D Finite Element Modelling and Experimental Tests for Dowel Type Timber Joints. Construction and Building Materials, 23, 3043-3052
7
ORIGINAL_ARTICLE
بهبود مقاومتهای فیزیکی کاغذهای دست ساز با کاهش بار آنیونی خمیرکاغذ
مقاومت به کشش تر در فراوردههای بهداشتی سلولزی بسیار مهم میباشد و هنگامی که این فراورده ها با فرایندهای بازیافت تولید می شود به علت عدم ثبات برخی از ویژگی های سوسپانسیون خمیرکاغذ دستیابی به حدود مطلوب ویژگی های کیفی دشوار است. به نظر می رسد ارتباط قوی تری بین مقاومت به کشش در حالت تر و میزان بار آنیونی سوسپانسیون خمیر کاغذ وجود داشته باشد. در این تحقیق با استفاده از مقادیر مختلف دو نوع پلیمرهای کاتیونی ابتدا بار آنیونی سوسپانسیون خمیر کاغذ به تدریج کاهش و سپس با اضافه نمودن پلیمر افزاینده مقاومت به کشش تر و عامل تثبیت کننده آن کاغذهای دست ساز با ویژگی های مقاومتی مختلف ساخته شد. نوع و مقدار مصرف پلیمر های کاتیونی تأثیر معنی داری بر کاهش بار آنیونی دوغاب خمیر کاغذ و در نتیجه افزایش مقاومت به کشش تر و سایر ویژگی های مقاومتی کاغذهای دست ساز داشت. تأثیر پلیمرها در بهترین شرایط باعث شد بار آنیونی از eq/Lµ 237 در نمونه شاهد به eq/Lµ32 کاهش یابد تا مقاومت به کشش تر از N/m13 به N/m 121، مقاومت به کشش در حالت خشک از N/m 2730 به N/m 2860 و مقاومت به ترکیدگی ازkPa 146 به kPa 160 با استفاده از 135 میلی گرم بر لیتر پلیمر F10 افزایش یافتند. نتایج رگرسیون گام به گام ارتباط میزان بار آنیونی خمیروکاغذ با ویژگی های کاغذهای دست ساز را تایید کرد. نتایج این پژوهش نشان داد که با کاهش بار آنیونی دوغاب خمیر کاغذ جوهرزدایی شده می توان مقاومت به کشش تر و نیز سایر ویژگی های مقاومتی کاغذهای دست ساز را افزایش داد.
https://ijwpr.areeo.ac.ir/article_107117_766344f262207ee93c16d854a1107a1b.pdf
2017-04-21
83
93
10.22092/ijwpr.2017.107117
بار آنیونی
کشش تر
خمیر جوهرزدایی شده
رگرسیون گام به گام
سید عباس
مهدیخواه
k.mehdikhah@gmail.com
1
دانشجوی کارشناسی ارشد علوم و صنایع چوب و کاغذ،دانشکده کشاورزی ومنابع طبیعی دانشگاه آزاد اسلامی واحد کرج ،کرج ،ایران.
AUTHOR
شادمان
پورموسی
sh.pourmousa@gmail.com
2
دانشیار گروه علوم و صنایع چوب و کاغذ،دانشکده کشاورزی ومنابع طبیعی دانشگاه آزاد اسلامی واحد کرج ،کرج ،ایران.
LEAD_AUTHOR
آژنگ
تاج دینی
atajdini@gmail.com
3
دانشیار گروه علوم و صنایع چوب و کاغذ،دانشکده کشاورزی ومنابع طبیعی دانشگاه آزاد اسلامی واحد کرج ،کرج ،ایران.
AUTHOR
- Harding, R.C.G, and Gess, J.M. (1985).Method for preparation of cationic cellulose, Patent 4505775, 14 page.
1
-Hashimoto, K., Suzuki, K., and Kamaya, Y. (2004). Wet-end properties of cationic graft depolymerized polyacrylamides, Journal of Wood Science, 50 ( 3):271-274.
2
- Hubbe, M.A, 2006.Paper resistance to wetting, a view of internal sizing chemicals and their effects, Bioresources: 2(1), 106-145.
3
-Garcia, J. , Cadena, E.M , Vidal , T. ,and Torres, A.L .( 2008 ). Determination of zeta potential and cationic demand of bleached pulps, V CONGRESO IBEROAMERICANO DE INVESTIGACION EN CELULOSA Y PAPEL, 13 Page.
4
-Khosravani, A., Jahan Latibari, A., Mirshokraei, S.A., Rahmaninia, M., and Nazhad, M.M. (2010). Studying the effect of cationic Starch-Anionic nanosilica system on retention and drainage, Bioresources, 5(2), 939-950.
5
- Matsushita, Y., Iwatsuki, A., and Yasuda,S. ( 2004). Application of cationic polymer prepared from sulfuric acid lignin as a retention aid for usual rosin sizes to neutral papermaking, Journal of Wood Science, 50(6):540-544.
6
-Nazari, A., Montazeri, M.,and Rahimi, M.K.(2009). Completing both antimicrobial and bleach white cotton clothes and cationic nanoparticles of titanium dioxide using butane tetra carboxylic acid, Journal of Polymer Science and Technology, 12(1):41-51
7
-Pourmousa, Sh., and Yadollahi.R. ( 2013). Optimization of the performance of PAE resin combined with retention aid and CMC in tissue paper production using deinked pulp, Iranian Journal of Wood and Paper Science Research, 28(3):489-497.
8
-Rashidi joybari, I., Azad fallah, M., Resalati, H., and Hamzeh.Y. (2015).Effect of softwood fibers cationization with EPTMAC and mixing with CMP, Journal of Forest and Wood, 68(2):235-245
9
-Sepidehdam, S.J., and Sotodeh, A.(2014).The performance of cationized pulp fiber as paper making Wet-end additive, Iranian Journal of Wood and Paper Science Research,29(3):354-367.
10
-Sood,Y.V.,Tyagi, R., Tyagi, S.,Pande, P.C., and Tondo, R.(2010).Surface charge of different papermaking raw material and its influence on paper properties, Journal of Scientific and Industrial Research,69(4),300-304.
11
-Wei, X., Feng, Hai-Li., and Qian ,Xue-ren.(2008).Preparation and application of cationized pulp fiber as a papermaking wet end additive, Journal of Forestry Research,19(3):235-238.
12
ORIGINAL_ARTICLE
تاثیر زمان کوبش بر ویژگیهای خمیرکاغذ سودا و مونواتانول آمین حاصل از کاه گندم
در این تحقیق به بررسی تأثیر زمان کوبش بر ویژگیهای مرفولوژی، فیزیکی و مقاومتی خمیرکاغذ سودا و مونواتانول آمین حاصل از کاه گندم، جهت دستیابی به زمان بهینه کوبش پرداخته شده است. جهت کوبش خمیرکاغذها از کوبنده آزمایشگاهی یوکرومیل در زمانهای مختلف استفاده شد. نتایج نشان داد که با افزایش زمان کوبش درجه روانی (SR) خمیرکاغذها افزایش یافت و در این بین خمیرکاغذ مونواتانول آمین در زمان کمتری نسبت به خمیرکاغذ سودا، به میزان بیشینه درجه روانی (SR) رسید. همچنین مشاهده شد، افزایش زمان کوبش باعث کاهش طول الیاف، ضخامت، زبری، تخلخل، و افزایش دانسیته و میزان نرمه در هر دو نوع خمیرکاغذ میگردد. همچنین مشخص شد، خمیرکاغذ مونواتانول -آمین پس از مدت زمان 30 دقیقه، به بیشترین میزان شاخص کشش خود (N.m/g 3/91) میرسد و پس از آن افزایش زمان کوبش تأثیر معنیداری بر افزایش این ویژگی نخواهد داشت. در مورد خمیرکاغذ سودا مشاهده گردید که با افزایش زمان کوبش شاخص کشش بطور معنیداری افزایش مییابد و در زمان 50 دقیقه بیشترین میزان شاخص کشش (N.m/g 7/87) برای این نوع خمیرکاغذ حاصل میشود. بیشترین میزان شاخص ترکیدن در خمیرکاغذ سودا برابر با kp.m2 5 میباشد که درمدت زمان 50 دقیقه کوبش حاصل میگردد. در مورد خمیرکاغذ مونواتانول آمین با افزایش مدت زمان کوبش تا 40 دقیقه شاخص ترکیدن افزایش یافته و به میزان بیشینه خود (kp.m2 6/5) میرسد و پس از آن، میزان آن کاهش مییابد. افزایش زمان کوبش باعث کاهش شاخص پارگی در هر دو نوع خمیرکاغذ مونواتانول آمین و سودا شد. با بررسی نتایج مشاهده شد که خمیرکاغذ مونواتانول آمین، نسبت به خمیرکاغذ سودا، بازده بالاتر و قابلیت کوبش بهتری دارد که این میتواند به دلیل قابلیت بهتر مونواتانول آمین در حفظ کربوهیدراتها و ترکیبات معدنی باشد.
https://ijwpr.areeo.ac.ir/article_107118_6ab3e664e6bee85d9ecbe028da4e6bb8.pdf
2017-04-21
94
105
10.22092/ijwpr.2017.107118
کوبش
کاه گندم
مونواتانول آمین
یوکرومیل
ویژگیهای فیزیکی و مکانیکی
محمد
احمدی
mohamad_198180@yahoo.com
1
استادیار، دانشکده کشاورزی و منابع طبیعی، دانشگاه محقق اردبیلی، اردبیل
LEAD_AUTHOR
سحاب
حجازی
shedjazi@ut.ac.ir
2
دانشیار، گروه صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
AUTHOR
کامیار
صالحی
kamyarsalehi@yahoo.com
3
بخش تحقیقات علوم چوب و فراورده های آن، مؤسسه تحقیقات جنگل ها و مراتع کشور، سازمان تحقیقات، آموزش و ترویج کشاورزی، تهران، ایران
AUTHOR
-Atchinson, J.E., 1995. Non-wood fiber could play major role in future US papermaking furnishes. Journal of Pulp and Paper, 70 (7): 125–131.
1
-Atchinson, J.E., 1996. Twenty-five years of global progress in nonwood plant fiber repulping. TAPPI J, 79 (10): 87–97.
2
-Atchison, J., 1998. Update on global use of non-wood plant fibers and some prospects for their greater use in the United States, In: Proceedings of the North American Non-wood Fiber Symposium,atlanta,Georgia, 4-6 September, Tappi Press.
3
-Andalibian, M.A., Mahdavi, S., Kermanian, H. and Ramezani, O., 2013. The influence of OCC pulp refining to improve the properties of test liner board. Iranian Journal of Wood and Paper Science Research, 28 (1): 139-152.
4
-Bhardwaj, N. K., Hoang, V. and Nguyen, K. L., 2007. A comparative study of the effect of refining on physical and electrokinetic properties of various cellulosic fibres. Bioresource Technology Journal, 98(8): 1647–1654.
5
-Chuiko,V., Chupka, L. and Nnikitin,V., 1974. Change in lignin during cooking with monoethanolamine. Khimiya I tekhnol. Tsellyulozy , 13(1): 34-36.
6
-Green, J. and Sanyer, N., 1982.Alkaline pulping in aqueous alcohols and amines. TAPPI J, 5: 133-137.
7
-HedjaziS., Kordsachia,O., R. Patt. and kriepl, A., 2009. MEA/water/AQ-pulping of wheat straw. Holzforschung, 63(5): 505–512.
8
-Hedjazi,S., Heidari Adli,A., Jahan Latibari,A., Hmazeh,Y., O.kordsachia. and Ahmadi,M., 2011. Ethanolamine Pulping- As A Novel Opportunity to Overcome Rice Straw Pulping Challenges. Proceedings of the 16th ISWFPC. China, Beijing, 4-6 May: 78-83.
9
-Kevin, A., Truner, P. and Malier, R., 2000. The impact of refining index on the wood, pulp and paper properties of Eucalyptus Grandis clone, In: Proceedings of International Conference of Paptac, Montreal, Canada, 31 March: 493-502.
10
-Kord,B., 2009. Effect of Refining Intensity on Pulp and Paper Properties Made of Eucalyptus Camaldulensis Wood. Iranian Journal of Wood and Paper Science Research, 24 (1): 125-133.
11
-Reme, A.P., 2000. Fiber dimension during defibration and fiber development, In: Proceedings of International Conference of Paptac, Canada, Montreal, 31 March: 480-486.
12
-Sarwar Jahan M., 2008. Process for production of dissolving pulp from terma orientalis by prehydrolysis kraft. Bio resources Journal, 3: 33-38.
13
-Shiralizadeh F., Hedjazi S. and Ahmadi M., 2015. Evaluation of pulp properties produced from rice straw by combination the monoethanolamine and potassium hydroxide. Iranian Journal of Wood and Paper Science Research, 30 (1): 46-59.
14
-Talaeipour, M., 2009. Effect of refining of deinked pulp on the optical, physical and mechanical properties of paper. Iranian Journal of Wood and Paper Science Research, 2 :34-36.
15
ORIGINAL_ARTICLE
بررسی تاثیر نوع اتصال بر روی توزیع تنش و نحوه شکست سازه صندلی به روش عناصر محدود
در این تحقیق مقاومت و تمرکز تنش بر روی سازه ی صندلی با تغییر نوع اتصال(اتصال کام و زبانه- اتصال دوبل) مورد بررسی قرار گرفت.برای ساخت صندلی ها از چوب چنار(platanus orientalis) استفاده و برای محاسبه ی مقاومت صندلی ها از دستگاه آزمون مکانیکی با سرعت بارگذاری 7/12 میلی متر بر دقیقه و برای نشان دادن توزیع تنش بر روی عضوهای صندلی از نرم افزار Ansys استفاده شد.نتایج نشان می دهد که صندلی با اتصال زبانه و کام و ساختاری ساده و با قید دارای مقاومت بیشتر و توزیع تنش کمتری نسبت به صندلی با اتصال دوبل با ساختار ساده و با قید بوده و تاثیر نوع اتصال روی مقاومت صندلی معنی دار بود.توزیع تنش نشان می دهد که تنش حداکثر بر روی اتصالات افقی صندلی قابل مشاهده می باشد.مدل های عناصر محدود نشان می دهند که توزیع تنش در صندلی های با اتصال زبانه و کام یکنواخت تر می باشد
https://ijwpr.areeo.ac.ir/article_107127_d1f32d36fa79df6644a7f0bd3378c7ae.pdf
2017-04-21
106
117
10.22092/ijwpr.2017.107127
اتصال دوبل
نرم افزار انسیس
توزیع تنش
عناصر محدود
سهیلا
زمانی نسب
soheila_zamaninasab@yahoo.com
1
کارشناس ارشد مهندسی صنایع چوب و کاغذ، دانشکده کشاورزی و منابع طبیعی، دانشگاه آزاد اسلامی، واحد کرج
AUTHOR
امیر
لشگری
amir.lashgari@kiau.ac.ir
2
دانشیار، گروه مهندسی صنایع چوب و کاغذ، دانشکده کشاورزی و منابع طبیعی، دانشگاه آزاد اسلامی، واحد کرج
LEAD_AUTHOR
آژنگ
تاج دینی
atajdini@gmail.com
3
دانشیار گروه صنایع چوب و کاغذ، دانشکده کشاورزی و منابع طبیعی، دانشگاه آزاد اسلامی، واحد کرج
AUTHOR
-Eckelman, C., 2003.Text book of product engineering and strength design of furniture.Purdue university press, West Lafayette, Usa, 231p.
1
-Ebrahimi, Gh., 1997.Mechanical wood and its composite products.theuniversity of Tehran.Tehran University Press, second edition, 660p.
2
-Jahed motlagh, H., Novian, H., Eshraghi, M., 1991. Ansys. Amirkabir University Press,400p.
3
-Lashgari, A., 2011. Predictive failure analysis and stress distribution in the double connection to the finite element method.Journal of Wood and Paper Science Research.26 (4):708-718.
4
-Lashgari, A., 2012. Engineering and Structural Design Furniture.Islamic Azad University of Takestan. Tehran University Press, The first edition, 353 p.
5
-Lashgari, L., mohammadi, A., 2012.Fracture Mechanics and Fatigue in wood. The Islamic azad university of Takestan. Tehran University Press, the first edition, 312p.
6
-Igor,D.,Dusan, S., 2009. Stress distribution in chair construction. Faculty of forestry, Journal of Wood Science, 52:358-362.
7
-Gustafson, S.,1995. Furniture design by use of the finite element method.HolzalsRoh-und werkstoff, 53(4):257-260.
8
-Keith, F., Fahenty, p., Thomas, G., Williamson, E., 1995. Wood engineering and construction handbook. -McGraw-Hill Education, Krieger Publishing Company, 928p.
9
-Safdari,v., Sepidehdam,M., Hosseini hashemi, Kh., 2009. Wood Science and Forest Products. Islamic azad University Press,333-379.
10
-Smardzewski, J., Prekrad, S., 2004. Stress distribution in angle joints of skelection furniture electronic. Journal of polish agriculture universities technology (7) I(1)
11
ORIGINAL_ARTICLE
تأثیر استفاده از کربنات کلسیم حاصل از تصفیه آب بر ویژگیهای مقاومتی کاغذ کنگره ای تهیه شده از خمیرکاغذ OCC و NSSC
در نتیجه تصفیه و در طی فرایند سبککردن و کاهش سختی آب، رسوبات کربنات کلسیم به همراه سایر ناخالصیها ایجاد میشود که بهصورت لجنهای معدنی جمعآوری و دفن میشوند . این تحقیق با هدف بررسی تأثیر استفاده از پرکننده کربنات کلسیم حاصل از تصفیه آب کارخانه چوب و کاغذ مازندران بر ویژگیهای مقاومتی کاغذ کنگرهای حاصل از دو خمیرکاغذ سولفیتخنثی نیمهشیمیایی و کارتنهای کنگرهای کهنه صورت گرفته است. کربناتکلسیم در سه سطح مصرفی 5 درصد، 10 درصد و 15درصد وزن خشک کاغذ به خمیرهای کاغذ اضافه شد. مقاومت به عبور هوا کاغذهای دستساز، به همراه شاخص مقاومت در برابر کشش، شاخص مقاومت در برابر ترکیدن، شاخص مقاومت در برابر پارهشدن و مقاومت به لهیدگی کنگرهای اندازهگیری و با نمونههای کاغذهای دستسازشاهد(نمونههای فاقد کربنات کلسیم) مقایسه شد. نتایج این تحقیق نشان داد که استفاده از کربناتکلسیم حاصل از تصفیه آب بر ویژگیهای مقاومتی کاغذ کنگرهای تأثیر منفی دارد. این تأثیر منفی پرکننده کربناتکلسیم بر خمیرکاغذ بکر سولفیتخنثی نیمهشیمیایی و خمیرکاغذ کارتنهای کنگرهای کهنه در کیفیت کاغذ کنگرهای متفاوت بوده و در خمیرکاغذ کارتنهای کنگرهای کهنه بیشتر است.
https://ijwpr.areeo.ac.ir/article_107128_23171b5b9bc50c07a104d5f829041215.pdf
2017-04-21
118
130
10.22092/ijwpr.2017.107128
کاغذ کنگره ای
پرکننده
کربنات کلسیم
مقاومت های کاغذ
مینا
اکبری
amina37@yahoo.com
1
دانشجوی کارشناسی ارشد خمیر و کاغذ، دانشگاه علوم کشاورزی و منابع طبیعی ساری
AUTHOR
قاسم
اسدپور
asadpur2002@yahoo.com
2
استادیار گروه خمیر و کاغذ دانشگاه علوم کشاورزی و منابع طبیعی ساری
LEAD_AUTHOR
نورالدین
نظرنژاد
nazarnezhad91@gmail.com
3
دانشیار گروه خمیر و کاغذ دانشگاه علوم کشاورزی و منابع طبیعی ساری
AUTHOR
-Afra, E., 2007. Principles of paper properties. Aeej press, Tehran. 360p.
1
-Akbari, M., Kaboodi, N., Torabi, H., Asadpour, Gh. and Dehghani firoozabadi, M.R., 2015. Improving the printing and writing paper properties using PCC filler modified by cationic starch. Iranian Journal of Wood and Paper Science Research, 29(4): 515-525.
2
-Antunes, E., Garcia, F.A.P., Ferreira, P. and Rasteiro, M.G. 2008. Flocculation of PCC filler in papermaking: Influence of the particle characteristics. Chemical Engineering Research and Design, 86(10): 1155-1160.
3
-Asadpour, GH., 2012. Investigation of using colloidal silica nanoparticles and CMP cationic fiber fines on fillers retention and properties of pulp and paper improvement. Ph.D. thesis. University of Agriculture and Natural Resources of Gorgan, 250p.
4
-Bagherzadeh, F., 2013. Determining the optimal consumption of fillers (china clay and GCC) in the fluting papers that produced from mixture of NSSC and OCC pulps with maintaining strength properties. M.Sc., thesis. University of sari agriculture and natural resources.
5
-Barzan, A., 1997. Investigation of the application of waste paper packaging in fluting paper production in Mazandaran wood & paper industries. M.SC thesis. Tarbiat moddares University. 95.
6
-Barzan, A., Resalaty, H., and Asadpour atoei Gh. 2015. Study of using water softening process byproduct, calcium carbonate on fine paper production. Iranian Journal of Wood and Paper Science Research, 30(1):1-25.
7
-Biermann C.J., 1996. Handbook of Pulping and Papermaking Second Edition. Academic Press Ltd., London, England.
8
-Christopher, J., 2007. Chemistry Paper. Aeej press, Theran. 240p.
9
-Ebrahimi, M., 2011. Investigation of mineral fillers retention on strength and optical properties of CMP pulp. M.Sc. thesis. University of shahid beheshti.
10
-Forozande sharaki, K., 2003. The principle of water treatment and purification. payame-noor press.424p. (In Persian)
11
-Gentile, E. 2003. Clays as fillers and coatings for paper. Presented at euro clays workshop, European clay minerals group meeting, Modena, Italy, June.
12
-Hamzeh, Y. and Rostampour Haftkhani, A., 2009. Principals of papermaking chemistry. Tehran university press, 424 p. (In Persian).
13
-Hemmasi, A.h., 2005. Application of Biotechnology in Pulp and Paper Industry. JOURNAL OF AGRICULTURAL SCIENCES Islamic Azad University, 11(1): 105-119.
14
-Kasmani J., Samariha A. and Nemati M. (2014). Effect of Mixing Different Contents of OCC Pulp on NSSC Pulp Strength. Bio Resources, 9(3), 5480-5487pp.
15
-Linen, C., Booth, G. 1990. Paper matters. Uk: paper publication.
16
-Lopes Velho, J., 2002. How Mineral Fillers Influence Paper Properties: Some Guidelines, Iberoamerican Congress on Pulp and paper Research.
17
-Lumianen, J., 2000. Refining of chemical of chemical pulp In: Gullichsen, J. and Paula Puro, H., (Eds), Paper making science and technology. Book & Fapet Oy. Jyvaskyla, Finland.
18
-Mehrabi, E., Resalati, H., and Mohamadzade, K. 2015. Investigation on Effect of Using Precipitated Calcium Carbonate on Paper Properties Made from CMP and Wood-Free Pulp Furnish. 22 (2): 1-17.
19
-Mohammadzade Saghavaz, K. Resalati, H. and Mehrabi, E., 2014. Jornal of Wood & Forest Science and Technology, Vol. 21 (2): 133-147.
20
-Nicu. r., bobu, e., Desbrieres , j ., 2010. Chitosan Cationic Polyelectrolyte in Wet-end papermaking systems. Cellulose Chemistry and Technology J., 10, 102-108pp.
21
-Norell, M., Johansson, K., and Persson, M., 2000. Papermaking Science and Technology, Book 4, Papermaking Chemistry, Chapter 3, Retention and Drainage, Finland, Fapetoy.Scott, W.E., 1996. Principles of Wet End Chemistry, Chapter 1, Introduction to Wet End Chemistry, Tappi Press, 1-4 pp
22
-Scott, W.E. 1996. Principles of Wet End Chemistry, Chapter 1, Introduction to Wet End Chemistry, TAPPI Press, 1-4 pp.
23
-Smoke, G., 2002. Pulp and Paper Technology. Aeej press, Tehran. 160p.
24
ORIGINAL_ARTICLE
تعیین حداقل غلظت بازدارندگی بنومیل بر چهار جدایه قارچی در کاغذهای تاریخی
بخش قابل توجهی از تاریخ و فرهنگ بشر به صورت اسناد و آثار هنری کاغذی ثبت شدهاست. این مساله لزوم حفاظت از این آثار را ایجاب میکند. تخریب بیولوژیک ناشی از فعالیت قارچها، از مهمترین عوامل تخریب مواد آلی به ویژه آثار کاغذی به شمار میرود. هدف از این بررسی تعیین حداقل غلظت بازدارندگی(MIC) بنومیل برای قارچهای آسپرژیلوس نایجر، آسپرژیلوس ترئوس، پنیسیلیوم و کلادوسپوریوم جداسازی شده از صفحههای کاغذی نسخهها و کتابهای خطی آلوده به قارچ است. در این بین جدایههای مورد بررسی از نظر حساسیت به بنومیل با یکدیگر نیز مقایسه شدهاند. شناسایی جنس قارچها با توجه به خصوصیات ماکروسکوپی و نیز ویژگیهای میکروسکوپی به روش slide culture با میکروسکوپ نوری انجام شد. به منظور تعیین حداقل غلظت بازدارندگی تیمار الکلی بنومیل برای رشد هریک از جدایهها بر کاغذ، از روش دیسک دیفیوژن استفاده شد. طرح آزمایش مورد استفاده برای سنجش مقاومت قارچی کاغذهای تیمار شده بر اساس استاندارد ASTM D 2020-92 انجام گرفت. نتایج حاصل از بررسی نشان داد که همه قارچهای مورد آزمون به بنومیل حساس بوده و تیمار الکلی بنومیل مانع رشد جدایههای مورد آزمون بر کاغذ شدهاست. جنس پنیسیلیوم کمترین MIC برابر با ppm5/12 و جنس آسپرژیلوس بیشترین MIC برابر با ppm100 داشتند. میزان MIC به دست آمده برای آسپرژیلوس ترئوس و کلادوسپوریوم ppm50 بود. بررسی تفاوت قطر کلنی بین نمونههای شاهد، کنترل و تیمار شده نشان داد، در همه جدایهها با افزایش غلظت بنومیل از قطر کلنی در کاغذهای تیمار شده نسبت به گروههای کنترل و شاهد، کاسته شده و درصد بازدارندگی افزایش یافته است. %100 بازدارندگی و عدم رشد برای پنیسیلیوم در کاغذهای تیمار شده با غلظت≤ ppm5/12، برای آسپرژیلوس ترئوس و کلادوسپوریوم در کاغذهای تیمار شده با غلظت ppm ≤50 و برای گونه آسپرژیلوس نایجر در کاغذهای تیمار شده با غلظت ppm100 مشاهده شد.
https://ijwpr.areeo.ac.ir/article_107594_f6c3f80713abd8241a72ce0ec68d4e2e.pdf
2017-04-21
131
144
10.22092/ijwpr.2017.107594
ضدقارچ
بنومیل
کاغذ تاریخی
حداقل غلظت بازدارندگی
جواهر
چعباوی زاده
javaher_chabavi@yahoo.com
1
استادیار، عضو هیئتعلمی گروه قارچ و انگلشناسی دانشگاه علوم پزشکی اصفهان، اصفهان، ایران
AUTHOR
حسین
احمدی
h.ahmadi@aui.ac.ir
2
دانشیار، عضو هیئتعلمی دانشکده مرمت، دانشگاه هنر اصفهان، اصفهان، ایران
AUTHOR
محسن
محمدی آچاچلویی
mohsen.mohammadi@aui.ac.ir
3
استادیار، عضو هیئتعلمی دانشکده مرمت، دانشگاه هنر اصفهان، اصفهان، ایران
AUTHOR
مهشید
شیردوانی
mahshid_shirdavani@yahoo.com
4
دانشجوی دکتری حفاظت و مرمت اشیا تاریخی و فرهنگی، دانشگاه هنر اصفهان، اصفهان، ایران
LEAD_AUTHOR
-ASTM D2020-92, 2003. Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard.
1
-Andrews, J., 2001. determination of minimum inhibitory concentrations. Journal of Antimicrobial Chemotherapy, 48(1): 5-16.
2
-Ansari, K.N., Muheet, A., 1990. Evaluation of some fungisides for seed treatments and foliar application in management of damping-off seedlings aond blight of rapeseed caused by Alternaria brassicae. Mycopathologia, 100: 137-163.
3
-Cavena, G., Nugari, M. and Salvadori, O., 2008. Plant Biology for Cultural Heritage: Biodeterioration and Conservation. Getty ,Los Angeles.
4
-E.Florian, m.L., 2004. Fungal Facts, solving fungal problems in heritage collections. Archetype publication, london.
5
-Elnaggar, A., Sahab, A., Ismail, S., Mahgoub G. and Abdelhady, M., 2010. Microbial Study of Egyptian Mummies: an Assessment of Enzyme Activity, Fungicides and Some Mummification Materials for the Inhibition of Microbial Deterioration. e-conservation magazine, 16: 39-49.
6
-Gallo, F., 2010. Aerobiological research and problems in libraries: 61-74. In: Mitchell, R. and Mc namara, C., (Eds). Cultural Heritage Microbiology. washington, DC.
7
-Ghahri, M., 2006. A review of the paper destructive fungi, pathology and ways to prevent and cope. Marammat & pazhouhesh, 1: 27-41.
8
-Leah Nardi, A., Vandom, F., 1379. Guide the preservation, conservation and restoration of paper: Sarvghad moghadam, A., (Trns). Islamic Research Foundation of Astan Quds Razavi, Mashhad.
9
-Magnucka, E.G., Suzuki, Y., Pietr, S.J., Kozubek, A., Zarnowski, R., 2007. Action of benzimidazol fungicide on resocinolic lipid metabolism in rye seedling depends on thermal and light growth conditions. pestcide Biochemistry and Physiologo, 88: 219-225.
10
-Mitchell, R., McNamara, C., 2010. Fundamental Studies in Conservation Science. ASM Press, Washington DC.
11
-Mohammadi achachlouei, M., Kouchakzaei, A., 2013. Characterization of fungies and their effect on documents and manuscripts in the archive of Malek national library and museum institution. Ganjineh Asnad, 23(4): 126-145.
12
-Munktell Ahlstrom. (2014). Retrieved from http://munktell.com/en/Munktell/Munktell-products/Datasheets/
13
-Neves, E. R., Schofer, S., Phillips, A., Canejo, J., Macedo, M. F., 2009. antifungal effect of diffrent methyl and propyl paraben mixtures on the treatment of paper biodeterioration. International Biodeterioration & Biodegradation, 63: 267-272.
14
-Pedregosa, A., Rios, S., Monistrol, F., laborda, F., 1995. Effect of the microtubule inhibitor methyl benzimidazol-2-yl carbamat (MBC) on protein secretion and microtubule distribution in cladosporium cucumerinum. Mycol. Reseach, 99(1): 43-48.
15
Rahmen, A., 1992. Effect of fungicide benomyl on cell wall degradiation by som fungi. Zentralblant fur Mikrobiologie, 147(5): 329-339.
16
-Seqeira, S., cabrita, E., Macedo, M., 2012. Antifungals on paper conservation: an overview. International Biodeterioration & Biodegradation, 74: 67-86.
17
-Shakeri, M., Hoseini, M., Dehghani, F., 1393. Determine the pomegranate fruit rot control methods in stock. Zeraat & Baghbani. 74: 166-171.
18
-Suwalsky, M., Benites, M., Norris, B., Sotomayor, P., 2000. Toxic effects of the fungicide benomyl on cell membranes. Comparative Biochemistry and Physiology, 125: 111-119.
19
-The Hague. (2004). Benomyl; Health-based Reassessment of Administrative Occupational Exposure Limits. Netherlands: The Hague: Health Council of the Netherlands, Committee on Updating of Occupational Exposure Limits.
20
ORIGINAL_ARTICLE
بررسی ویژگیهای مکانیکی تخته فیبر دانسیته متوسط تولید داخلی و وارداتی به کمک پروفیل دانسیته عمودی اشعه ایکس، طیف سنجی و آنالیز تصویری (مطالعه موردی شرکت آرین سینا)
هدف از این تحقیق بررسی ویژگیهای مکانیکی تخته فیبر دانسیته متوسط تولید داخلی و تخته فیبر دانسیته متوسط وارداتی (کشور مالزی) بوده است. به دلیل عدم شناخت و عدم دسترسی به اطلاعات عوامل و متغیرهای تأثیرگذار متعدد در تولید اوراق تخته فیبر در صنعت بهویژه تختههای وارداتی، برای درک بهتر تفاوتها از اشعه مادونقرمز برای نمایان کردن پروفیل دانسیته عمودی تختهها و طیف سنجی مادونقرمز (FT_IR)، جهت شناسایی ترکیبات الیاف و پیوندهای به وجود آمده با چسب و آنالیز ابعادی الیاف تختهها استفاده شد. نتایج تجزیهوتحلیل آماری نشان داد که تختههای تولید داخل نسبت به تختههای وارداتی مقاومتهای مکانیکی بالاتری داشته است. بطوریکه میانگین مقاومت خمشی و مدول الاستیسیته به ترتیب برای تختههای ساختهشده در داخل کشور 56/34 و 2762 مگاپاسکال بوده است و برای تختههای وارداتی 87/24 و 2277 مگاپاسکال میباشد. همچنین میانگین مقاومت چسبندگی داخلی برای تختههای ساختهشده در داخل کشور 78/0 مگاپاسکال و برای تختههای وارداتی 58/0 بوده است. نتایج حاصل از پروفیل دانسیته نشان داد که تختههای ساختهشده در داخل کشور، در لایه میانی دارای دانسیته 599 تا 615 کیلوگرم بر مترمکعب و لایههای سطحی نیز دارای دانسیته 1060 کیلوگرم بر مترمکعب، درحالیکه تختههای وارداتی در لایه میانی دارای دانسیته 533 تا 571 کیلوگرم بر مترمکعب و لایههای سطحی نیز دارای دانسیته 1020 کیلوگرم بر مترمکعب داشتهاند. با توجه به نتایج حاصل از طیف سنجیهای FT_IR بهدستآمده از نمونههای، تختههای تولید داخلی نسبت به تختههای وارداتی دارای پیوند هیدروژنی بیشتری می-باشند. تصاویر آنالیز الیاف نیز نشان داد بیشترین، کمتر و میانگین طول الیاف برای تختههای تولید داخل به ترتیب 260، 10 و 120 و بیشترین، کمتر و میانگین طول الیاف برای تختههای وارداتی به ترتیب 190، 5 و 45 بهدستآمده است.
https://ijwpr.areeo.ac.ir/article_107595_3a3f5b009c7a444155b776e6b9e09aa5.pdf
2017-04-21
145
156
10.22092/ijwpr.2017.107595
پروفیل دانسیته عمودی
طیفسنجی
آنالیز تصویری
تخته فیبر با دانسیته متوسط
وحید
معظمی
moazami_vahid@yahoo.com
1
کارشناس ارشد فرآوردههای چندسازه چوبی، مسئول تحقیق و توسعه شرکت آرین سینا، ساری، ایران،
LEAD_AUTHOR
فاطمه
افسونی
f.afsoni@ariansina.com
2
کارشناس ریاضی، مدیرعامل شرکت آرین سینا، ساری، ایران
AUTHOR
سعید
داداشی
s.dadashi@ariansina.com
3
کارشناس علوم چوب و کاغذ، مدیریت کارخانه شرکت آرین سینا، ساری، ایران
AUTHOR
اسماعیل
داداشی
e.dadashi1360@gmail.com
4
کارشناس علوم چوب و کاغذ، کارشناس فرآیند تولید کارخانه شرکت آرین سینا، ساری، ایران
AUTHOR
- Akbari, S., Nazerian, M., Farokhpayam, S.R. and Nosrati Sheshkal, B., 2015 Investigation of mechanical properties particleboard produced using canola stalks and poplar wood by Response Surface Method (RSM). Iranian Journal of Wood and Paper Science Research, 30(2): 230-242.
1
- Bodirlau, R., Teaca, C.A., Resmerita, A.M. and Spiridon, I., 2012. Investigation of structural and thermal properties of different wood species treated with toluene-2, 4-diisocyanate. International Journal of Cellulose chemistry and technology, 46 (5-6): 381-387.
2
- Belini, U.L., Fiorelli, J.b., Savastano, H. and Tomazello Filho, M., 2014. Density profile as a tool in assessing quality of new composite. Iranian Journal of Materials Research, 17(1): 138-145.
3
- Colom, X., Carrillo, F., Nogues, F. and Garriga, p., 2003. Structural analysis of photo degraded wood by means of FTIR spectroscopy. International Journal of Polymer Degrade. Stab, 80: 543–549.
4
- Edoga, M.O., 2006. Comparative study of synthesis procedures for urea-formaldehyde resins (Part I). Leonardo Electron. International Journal of Pract Techno, 72 (1):607-17.
5
- European Standard EN 310, 1996. “Wood based panels, determination of modulus of elasticity in bending and bending strength,” European Standardization Committee, Brussell.
6
- European Standard EN 319, 1996. Wood based panels, determination of tensile strength perpendicular to plane of the board. European Standardization Committee, Brussell.
7
- European Standard EN 622-5, 1998. “Fiberboard-Specifications-Part 5. Requirements for dry process board (MDF), TES.” European Standardization Committee, Brussell.
8
- Hua, J., Chen, G., Xu, D. and Shi, S., 2012.Impact of thermo mechanical refining conditions on fiber quality and energy consumption by mill trial. Journal of Bio resources 7(2): 1919-1930.
9
- Ibrahim, Z., Abdul Aziz, A., Raml, R., Mokhtar, A. and Lee, S., 2013. Effect of refining parameters on medium density fibreboard (MDF) properties from oil palm trunk (Elaeis guineensis). Iranian Journal of Open Journal of Composite Materials, 3:127-131.
10
- Ismaeilimoghadam, S., Shamsian, M., Bayat Kashkoli, A. and Kord, B., 2015. Effect of chemical modification of wood flour on properties of polypropylene-nano SiO2 hybrid nanocomposite. Iranian Journal of Wood and Paper Science Research, 30(4): 674-689.
11
- Jahanilomer, Z. and FarrokhPayam, S.R., 2015. Vertical density profile, a keyparameter for evaluating of particleboard quality. Iranian Journal of Wood & Forest Science and Technology, 24(4):1-21.
12
- Kelemwork,SB., Tafiar,PMM. and Ding, WE., 2007. Influence of culum age particle size and board density on the performance of particleboard made from Ethiopain highland bamboo (yushauia alpine). Journal of bamboo and rattan, 6(3&4): 239-250.
13
- Kumar, A., Gupta, A., Sharma, K.V., Nasir, M. and Ahamed Khan, T., 2013. Influenceof activated charcoal as filler on the properties of wood composites. International Journal of Adhesion & Adhesives, 46: 34-3.
14
- Maloney, T.M., 1977. Modern particleboard and dry process fiberboard manufacturing. Miller Freeman Inc., San Francisco, USA. 672 p.
15
- Masoudifar, M., Nosrati sheshkel, B., Mansouri, H.R., and Mohebbi Gargari, R., 2015. The Effect Type of Chemical Treatment of Wood Material on Physical, Mechanical and Morphological Properties of Wood Flour / Polypropylene Hybrid Composite. Iranian Journal of Wood and Paper Science Research, 30(1): 119-131.
16
- Muller, U., Ratzsch, M., Schwanninger, M., Steiner, M. and Zobl, H., 2003. Yellowing and IR-changes of spruce wood as results of UV-irradiatioon. International Journal of photochemistry Photobiology B, Biology, 69: 97-105.
17
- Nazerian, N. and Moazami, V., 2015. Bending strength of sandwich-type particleboard manufactured from giant reed (Arundo donax). Forest Products Journal. 65 (5-6): 292-300.
18
- Teaca B.R., 2009. Fourier trencform infrared spectroscopy and thermal analyses of lignocellulose fillers treated with organic anhydrides. Rom. International Journal of Phys. 54(1–2):93–104.
19
- Wong, E., Zhang, M. and Wang, Q., 2000. Formation of the density profile and its effects on the properties of fiberboard. Iranian Journal of Japan Wood Research Society, 46: 202-209.
20
- Wong, S., Winistorfer, P. and Young, T., 2001. Fundamentals of vertical density profile formation in wood composites. Part III. MDF density formation during hot-pressing. Iranian Journal of Wood and fiber science, 36(1), 17-5.
21
- Xu, H., and Suchsland, O., 1989. A simulation of the horizontal density distribution in a flake board. International Journal of Forest Products Journal, 39(5): 29-33.
22
- Zhang, Y., Yu, Z., Shan, F. and Shang, J., 2012. Characteristic and prediction model of vertical density profile of fiberboard with "pretreatment - Hot pressing" united technology. International Journal of wood research, 57(4):613-630.
23
- Zhiyong, C., James, H. and Jerrold, E., 2006. Effects of Pressing Schedule on Formation of Vertical Density Profile for MDF Panels, 40th International Wood Composites Symposium proceedings, Seattle, Washington. Pullman, Wash: Washington State University, April 11-12: 1-11.
24
- Zhou, D., Zhang, L. and Guo, S., 2005. Mechanisms of lead bio sorption on cellulose/chitin beads. Journal of Water Research, 39(16): 3755-3762.
25