Volume 39 (2024-2025)
Volume 38 (2023-2024)
Volume 37 (2022-2023)
Volume 36 (2021-2022)
Volume 35 (2020-2021)
Volume 34 (2019-2020)
Volume 33 (2018-2019)
Volume 32 (2017-2018)
Volume 31 (2016-2017)
Volume 30 (2015-2016)
Volume 29 (2014-2015)
Volume 28 (2013-2014)
Volume 27 (2012-2013)
Volume 26 (2011-2012)
Volume 25 (2010-2011)
Volume 24 (2009-2010)
Volume 23 (2008-2009)
Volume 22 (2007-2008)
Volume 21 (2006-2007)
Volume 20 (2005-2006)
Volume 19 (2004-2005)
Volume 18 (2003-2004)
Volume 17 (2002-2003)
Volume 16 (2002-2003)
Volume 15 (2001-2002)
Volume 14 (2001-2002)
Volume 13 (2001)
Volume 12 (2000-2001)
Volume 11 (2000-2001)
Volume 10 (2000-2001)
Volume 9 (2000)
Volume 8 (1999)
Volume 7 (1999)
Volume 6 (1998)
Volume 5 (1998)
Volume 4 (1997)
Volume 3 (1997)
Volume 2 (1996)
Volume 1 (1995)
Effect of CMP fiber grafting on strength properties of its paper

Iman Rashidi joibari; Mohammad Azad falah; Yahya Hamzeh; Hossein Resalatii; Saeid Mahdavi

Volume 28, SPRING 1 , March 2013, , Pages 24-34

https://doi.org/10.22092/ijwpr.2013.3071

Abstract
  Mechanical and chemi-mechanical pulps such as CMP, due to the weaker strength properties, have found limited application in the production of high quality papers as compared with chemical pulps. Therefore, appropriate modification of such fibers could be used to overcome such deficiencies. This study ...  Read More

Composite wood products
Evaluation of steam pretreatment of poplar wood particles on the mechanical and physical properties of particleboard

Hamid Hatefnia; Aliakbar Enayati; Kazem Dosthosseini; Mohammad Azadfalah

Volume 26, Issue 4 , January 2012, , Pages 785-797

https://doi.org/10.22092/ijwpr.2011.117255

Abstract
          In this research the effect of steam pretreatment on the physical and mechanical properties of particleboard were evaluated. Steam pre-treatment was applied on the particles of poplar wood in a stainless steel reactor at four different temperature (155, 165, ...  Read More