Chemical conversion
Saeed Hasani; Mohammad Talaei poor; behzad baziyar; Amir Homan Hemmasi; Saeed Mahdavi
Abstract
AbstractIn this study, black poplar (Populus nigra) cut from Zanjan province was used in two age groups of 18 and 38- year-old. Timbers with thicknesses of 4, 5 and 6 cm were prepared from each age group. The prepared timbers were modified during the heat treatment process (Thermowood) at a constant ...
Read More
AbstractIn this study, black poplar (Populus nigra) cut from Zanjan province was used in two age groups of 18 and 38- year-old. Timbers with thicknesses of 4, 5 and 6 cm were prepared from each age group. The prepared timbers were modified during the heat treatment process (Thermowood) at a constant temperature of 212 °C. Experimental samples were obtained from the surface and middle depth of heat-treated timbers. Heat-treated and control wood samples were subjected to accelerated weathering for 150 hours. Color lightness (L*), color difference (ΔΕ*) and water droplet contact angle were measured for heat-treated and control samples before and after weathering. In order to investigation of the wettability content, the method of measuring the contact angle of the water drop - static according to the ASTM D 5946 standard was used. In general, before weathering, the brightness of the heat-treated samples decreased compared to the control sample, but after weathering, the color lightness of the control samples decreased and the color lightness of the heat-treated samples increased. Also, the content of color difference of samples after weathering compared to before weathering showed a significant decrease statistically. Heat treatment increased the contact angle of water droplets of the samples 60.31% and the contact angle of water droplets of the heat-treated and control samples increased significantly after weathering compared to before weathering.
Management and Economics wood
Saeed Hasani; Seid Khalil Hosseini Hashemi; Ramin Farsi; Ahmad Jahan Latibari
Abstract
AbstractAmong the forest diseases, fungi are the most important factors that cause irreparable losses to the wood in standing trees and logs. Fungi are the cause of contamination and decay of trees and timbers in forest or in the stock of factories. Decayed woods are one of the biomass resources and ...
Read More
AbstractAmong the forest diseases, fungi are the most important factors that cause irreparable losses to the wood in standing trees and logs. Fungi are the cause of contamination and decay of trees and timbers in forest or in the stock of factories. Decayed woods are one of the biomass resources and a great amount of decayed woods in the forests are not viable. In this study some experiments were conducted in order to investigate the effect of Coriolus versicolor decay on compounds obtained from beech wood (Fagus orientalis L.) pyrolysis and preparation of various and valuable chemicals. Separation and identification of chemical compounds in sound wood and decayed wood of beech was conducted by using pyrolysis method at 500° C and in nitrogen atmosphere. Separation and identification of extracted chemical compounds was carried out using sailylation of these compounds by N, O-bis (trimethylsilyl) trifluoroacetamide and also using Gas Chromatography and Mass Spectrometry method. Totally, 23 compounds were identified in sound beech wood which most of these compounds, in this temperature, are related to 2,6-dimethoxyphenol and 3-hidroxy-4-methoxy benzoic acid; and 31 compounds were detected in decayed beech wood that most of them are related to Cyclononasiloxane octadecamethy and 4-(3,4-Dimethoxybenzylidene)-1-(4-nitrophenyl) and also 17 compounds were detected the same in sound and decayed wood.
