Volume 39 (2024-2025)
Volume 38 (2023-2024)
Volume 37 (2022-2023)
Volume 36 (2021-2022)
Volume 35 (2020-2021)
Volume 34 (2019-2020)
Volume 33 (2018-2019)
Volume 32 (2017-2018)
Volume 31 (2016-2017)
Volume 30 (2015-2016)
Volume 29 (2014-2015)
Volume 28 (2013-2014)
Volume 27 (2012-2013)
Volume 26 (2011-2012)
Volume 25 (2010-2011)
Volume 24 (2009-2010)
Volume 23 (2008-2009)
Volume 22 (2007-2008)
Volume 21 (2006-2007)
Volume 20 (2005-2006)
Volume 19 (2004-2005)
Volume 18 (2003-2004)
Volume 17 (2002-2003)
Volume 16 (2002-2003)
Volume 15 (2001-2002)
Volume 14 (2001-2002)
Volume 13 (2001)
Volume 12 (2000-2001)
Volume 11 (2000-2001)
Volume 10 (2000-2001)
Volume 9 (2000)
Volume 8 (1999)
Volume 7 (1999)
Volume 6 (1998)
Volume 5 (1998)
Volume 4 (1997)
Volume 3 (1997)
Volume 2 (1996)
Volume 1 (1995)
Composite wood products
Investigation of physical and mechanical properties of particleboard made from Apricot pruning and industrial wood particles

Ali akbar Enayati; Marzyeh Raeisi; Hamidreza Adalat

Volume 24, Issue 2 , October 2009, , Pages 244-253

https://doi.org/10.22092/ijwpr.2009.117379

Abstract
  For this study, the pruning of Apricot tree and industrial wood particles were used. The combination percent of Apricot wood particles (0, 15, 30 and 45) and press time (5 and 7 minute) were the variables of experiment. Results showed that with increasing the percent of Apricot wood particles, the amount ...  Read More

Composite wood products
Densification of Paullownia wood by using of hot-press

Hamid reza Adalat; Taghi Tabarsa; Marzyeh Raeisi

Volume 23, Issue 2 , October 2008, , Pages 136-148

https://doi.org/10.22092/ijwpr.2008.117411

Abstract
  For this study 10 logs of Paullowina.furtunie from Shastkalateh forest of Gorgan in Iran were selected randomly. After that, 45 clear flat swan specimens prepared and dried to 5% moisture. Density of each log and thickness of specimens were measured. Three levels of compression percent (16%, 33% and ...  Read More