Volume 39 (2024-2025)
Volume 38 (2023-2024)
Volume 37 (2022-2023)
Volume 36 (2021-2022)
Volume 35 (2020-2021)
Volume 34 (2019-2020)
Volume 33 (2018-2019)
Volume 32 (2017-2018)
Volume 31 (2016-2017)
Volume 30 (2015-2016)
Volume 29 (2014-2015)
Volume 28 (2013-2014)
Volume 27 (2012-2013)
Volume 26 (2011-2012)
Volume 25 (2010-2011)
Volume 24 (2009-2010)
Volume 23 (2008-2009)
Volume 22 (2007-2008)
Volume 21 (2006-2007)
Volume 20 (2005-2006)
Volume 19 (2004-2005)
Volume 18 (2003-2004)
Volume 17 (2002-2003)
Volume 16 (2002-2003)
Volume 15 (2001-2002)
Volume 14 (2001-2002)
Volume 13 (2001)
Volume 12 (2000-2001)
Volume 11 (2000-2001)
Volume 10 (2000-2001)
Volume 9 (2000)
Volume 8 (1999)
Volume 7 (1999)
Volume 6 (1998)
Volume 5 (1998)
Volume 4 (1997)
Volume 3 (1997)
Volume 2 (1996)
Volume 1 (1995)
Keywords = ALDER
Number of Articles: 4
Field Test on Resistance of Alder and Horn Beech At Coastal waters of Amirabad port in Caspian Sea
Volume 27, WINTER 4 , December 2012, , Pages 717-730
Abstract
In order to evaluate resistance of commercial wood species of alder and horn beech, logs were cut to lumbers. After caution of reduction moisture content, the lumbers were converted to special marine samples. The wood blocks were impregnated by CCA (Chrome- Cupper-Arsenic) and Betel method. Then treated ... Read MoreBending strengh of screwed T-typed furniture joints
Volume 27, Issue 3 , September 2012, , Pages 536-544
Abstract
Effects of screw length (2, 2.5,3 inch), wood species (beech, alder, white spruce), and two screw interval (2, 2/5 cm) on bending strength of the T-type joints were investigated. In order to fabricate the T –shaped joints, dimensions of the parts were determined as 15*5/5*2/5 cm. From the ... Read MoreTHE EFFECT OF SPECIES AND LAYER THICKNESS ON LAMINATED VENEER LUMBER (L. V. L.) MECHANICAL PROPERTIES
Volume 19, No., 2 , October 2004, , Pages 211-224
Abstract
Laminated veneer lumber (L. V. L) manufactured from Maple and Alder wood is investigated. Three levels of layer thicknesses of 2, 3 and 4mm. were investigated. Bending strength (MOR and MOE), CompressionThe results of this investigation indicated that laminated wood strength of samples produced from ... Read MoreACOUSTICAL PROPERTIES OF WOOD IN 2000, 4000 AND 8000 IN HERTZ FERQUENCIES
Volume 14, 14-No. 272 , May 2002, , Pages 27-47