Volume 39 (2024-2025)
Volume 38 (2023-2024)
Volume 37 (2022-2023)
Volume 36 (2021-2022)
Volume 35 (2020-2021)
Volume 34 (2019-2020)
Volume 33 (2018-2019)
Volume 32 (2017-2018)
Volume 31 (2016-2017)
Volume 30 (2015-2016)
Volume 29 (2014-2015)
Volume 28 (2013-2014)
Volume 27 (2012-2013)
Volume 26 (2011-2012)
Volume 25 (2010-2011)
Volume 24 (2009-2010)
Volume 23 (2008-2009)
Volume 22 (2007-2008)
Volume 21 (2006-2007)
Volume 20 (2005-2006)
Volume 19 (2004-2005)
Volume 18 (2003-2004)
Volume 17 (2002-2003)
Volume 16 (2002-2003)
Volume 15 (2001-2002)
Volume 14 (2001-2002)
Volume 13 (2001)
Volume 12 (2000-2001)
Volume 11 (2000-2001)
Volume 10 (2000-2001)
Volume 9 (2000)
Volume 8 (1999)
Volume 7 (1999)
Volume 6 (1998)
Volume 5 (1998)
Volume 4 (1997)
Volume 3 (1997)
Volume 2 (1996)
Volume 1 (1995)
Chemistry of wood
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation

Mehdi Abdolahi; Said amir Mosavian; Akbar Varamsh; Amin Asadi

Volume 32, Issue 3 , September 2017, , Pages 369-381

https://doi.org/10.22092/ijwpr.2017.109402.1388

Abstract
  In this research, two types of lignin, i.e. one extracted from industrial waste water of the Iran wood and paper (choka) factory as black liquor and another provided from Aldrich company, were studied. Firstly, the lignin was precipitated from its black liquor by a dilute acid and was then purified by ...  Read More

Management and Economics wood
Studying the effect of acetylation Beech on interfacial bonding resistance of transparent paint (nitrocellulose lacquer, asid catalyzed lacquer and Half Ppolyester)

shahram tahmasebi; behzad bazyar; habibolah Khademi Islam; mohammad Ghofrani

Volume 31, SPRING 1 , March 2016, , Pages 105-117

https://doi.org/10.22092/ijwpr.2015.102671

Abstract
        In this study, structural performance of corner joint reinforced by fiber reinforced polymers (FRP) at the area of maximum tension stress was investigated under diagonal tension loading. Therefore 1 to 3 layers of unidirectional woven Glass, Carbon and Kevlar fibers were used ...  Read More

Management and Economics wood
The influence of fiber chemical treatment on prevention of biologic deterioration of medium density fiberboard (MDF)

Reza Hajihassani; seyedeh masoomeh

Volume 29, Fall 3 , November 2014, , Pages 390-398

https://doi.org/10.22092/ijwpr.2014.6279

Abstract
  Abstract In this research, the effects of acetylation on the prevention of white-rot and brown-rot fungi deterioration in medium density fiberboard (MDF) were investigated. Sample boards were made from acetylated poplar fibers, which were treated at different times (0, 30, 90 and 270 minutes) to obtain ...  Read More

Investigation on the effect of acetylation and reduction treatments on the chromophore groups of isolated lignin from unbleached hardwoods chemimecanical pulp using FT-IR spectroscopy

Asghar Tabei; Reza Solhnejad; Arash Farajpoor Roodsari

Volume 29, SPRING 1 , May 2014, , Pages 79-93

https://doi.org/10.22092/ijwpr.2014.4926

Abstract
  This study lignin from unbleached hardwoods chemimechanical pulp was extracted and the chromophor functional groups of the lignin were studied. Acetylation and reduction treatments were perfomed and samples were analyzed by FT-IR spectroscopy. A mild acidic dioxin extraction method was employed to isolate ...  Read More

Investigation on effect of acetylation and antioxidant on weathering resistance of wood/HDPE composite

Neda Moradpour; Mohammad reza Mastari frahani; Alireza Shakeri

Volume 27, WINTER 4 , December 2012, , Pages 707-716

https://doi.org/10.22092/ijwpr.2017.109628

Abstract
  To investigate the effect of acetylation and antioxidant  separately and together on discoloration and contact angle wood plastic composite due to weathering , composite s were made using popular wood flour and high density polyethylene . the sample were exposed  to natural weathering for 6 ...  Read More

Management and Economics wood
Investigation on the effect of acetylation and the resin type on the biological resistance of aspen tree layered particleboard

Kazem Dost Hosseini; Maryam Ghorbani kobandeh; Samira Mohammad ali bighi; Alinaghi Karimi

Volume 26, Issue 3 , September 2011, , Pages 466-476

https://doi.org/10.22092/ijwpr.2011.117202

Abstract
  This research was conducted to evaluate the effects of acetylation and the resin type on three layered populus particleboard against white-rot fungus, Trametes versicolor. Populus particles were acetylated at three levels of acetyl content (WPG of 0, 8.39% and 17.27%). In manufacturing of single and ...  Read More

Physics and anatomy
Investigation effect of Weathering on Acetylated Beech Wood by FTIR Spectroscopy and Electron Microscopic

Maliheh Akhtari; Mehdi Arefkhani

Volume 25, Issue 1 , September 2010, , Pages 48-61

https://doi.org/10.22092/ijwpr.2010.117265

Abstract
  In this study acetylated Beech wood (Fagus orientalis Lipsky) has been subjected to a variety of artificial weathering conditions in different of times (0,150&300 h), then wood surface was analyzed for chemical changes using Fourier Transform Infrared (FTIR) spectroscopy and for structural changes ...  Read More

Pulp and paper
The Investigation of Acetylation and Anti-Oxidant Effect on Weathering of wood Plastic Composites By Means of FTIR and Color Metry (Color measurement)

Pyvand Darabi; Hamideh Abdolzadeh; Ali naghi Karimi; Seeyed Ahmad Mirshokraie; Kazem Doosthoseini

Volume 25, Issue 1 , September 2010, , Pages 70-79

https://doi.org/10.22092/ijwpr.2010.117268

Abstract
  In this study capability of acetylated poplar flour in manufacture of high density poly ethylene composite which expose to accelerated weathering, was investigated. The acetylation degrees at medium and zero (control) levels, use of anti- oxidant and duration of weathering were considered as variables ...  Read More

Influences of Acetylation on Water Absorption and Dimensional Stability of Manufactured Paper

Delaram Drakhshandeh; Behbood Mohebi; Saeed Mahdavi

Volume 22, Issue 2 , September 2008, , Pages 99-108

https://doi.org/10.22092/ijwpr.2007.117429

Abstract
  This research was carried out to study the influence of acetylation on paper dimensional stability. Specimens from printing paper and Texon paperboard were oven dried and then treated with acetic anhydride at 120°c for 30 and 60 min without catalyst. Acetylated papers were soaked in water for 2 and ...  Read More

Composite wood products
Effect of Acetylation on Physical and Mechanical Properties of Prticleboard

Yasamin Khosrevani; Ali akbar Enayati; Alinaghi Karimi; Behbood Mohebi

Volume 22, Issue 1 , October 2007, , Pages 18-28

https://doi.org/10.22092/ijwpr.2007.117418

Abstract
  The effects of different levels of wood particles acetylation and resin content on the physical and mechanical properties of particleboard were investigated. Boards were made within 6 treatments at three different levels of acetyl content (WPGs of 0%, 5.11% and 10.76 %) and two levels of resin content ...  Read More