Pulp and paper
Ghasem Asadpour; Hadi Boroshkian; Hossein Resalaty
Abstract
The purpose of this study is to investigate the effect of pH on cellulase enzyme activity on the drainage and strength properties of OCC pulp. Recycled OCC pulp was pretreated with consistency 0.4 percent, in constant condition the temperature is 50˚C, duration 1 hour and range pH:4-4.5, 8-8.5 with ...
Read More
The purpose of this study is to investigate the effect of pH on cellulase enzyme activity on the drainage and strength properties of OCC pulp. Recycled OCC pulp was pretreated with consistency 0.4 percent, in constant condition the temperature is 50˚C, duration 1 hour and range pH:4-4.5, 8-8.5 with cellulase enzyme at three levels 0.1, 0.3 and 0.5 percent (according to paper pulp dry weight). The results showed that pretreatment of cellulase enhances the freeness of pulp in comparison with the control samples, but by increasing the concentration of enzyme, the freeness of pulp was reduced in pH:4-4.5 the highest freeness is at the level of 0.1 percent and in pH:8-8.5 at the level of 0.3 percent. Also, papers were evaluated for resistance properties. The results showed that the increase in the use of cellulase enzyme has increased the tensile and burst strength index. As, in the alkaline pH, the effect of the cellulase enzyme on the increase of these strength was higher than the acid pH. The OCC pulp strength tear index, only in low levels of cellulase enzyme and in acidic pH, increased strength was observed, but with increasing enzyme consumption, there was a decrease in tear strength. Also, for strength to crushing, there was no specific trend regarding the amount of enzyme and pH on enzyme function.
Pulp and paper
Ali Ahmadi ladjimi; Mohammad Azadfallah; Mehdi Rahmaninia; Yahya Hamzeh
Abstract
Stickies is among the major challenges in paper recycling mills. This substance deposits on paper machine components and cause to break paper web as well as loss of end product quality. So, it is necessary to control the stickies and lessen its detrimental effects. It is known that cationic polymers ...
Read More
Stickies is among the major challenges in paper recycling mills. This substance deposits on paper machine components and cause to break paper web as well as loss of end product quality. So, it is necessary to control the stickies and lessen its detrimental effects. It is known that cationic polymers as fixing agents can control the stickies efficiently. Therefore, the control of stickies of OCC pulp using a commercial cationic polymer called GL at 0.4, 0.8 and 1.2 percent based on oven dry weight of pulp at pH 4 and pH 5 were investigated. Macro- and microstickies, dissolved and colloid substances (DCS), turbidity, and drainage time were measured to evaluate GL efficiency and compared with control sample. The results indicated that GL dosing at 0.4 and 0.8 percent in pH 4 and 7 due to flocculation and fixing the stickies onto the fiber caused to decrease in macro stickies, microstickies and DCS while improved the drainage time. Although, no efficient performance was observed in controlling stickies at higher content of GL i.e. 1.2 percent. Generally, it is concluded that with consuming at desired pH and dosage content, GL can be used as efficient agent to control stickies in processing of OCC pulp.
Pulp and paper
Nazbakht Hezbi; Elyas Afra; Hossein Resalty
Abstract
In this research, the effect of different steps of enzymatic treatment including enzymatic pre-refining and post-refining by Endoglucanase was investigated on the quality of OCC pulp. Three pulps including a: control sample (without enzyme addition), b: enzymatic pre-refining (enzyme treatment + refining) ...
Read More
In this research, the effect of different steps of enzymatic treatment including enzymatic pre-refining and post-refining by Endoglucanase was investigated on the quality of OCC pulp. Three pulps including a: control sample (without enzyme addition), b: enzymatic pre-refining (enzyme treatment + refining) and c: pre and post enzymatic refining (enzyme + refining + enzyme) were made from OCC pulps. Enzymatic treatment was done at optimum conditions before determined (concentration of 1u and time duration of 0.5 hour) under constant process conditions and refining accomplished at given revolution of 2000. Obtained results from this research indicated that applying enzymatic pre-treatment had efficient in improving the physical and mechanical of paper and showed the highest strength than to the other treatments. Using Endoglucanase at two stages (before and after refining) caused to improve pulp drainability and decrease the paper strength properties. In general, the maximum tear index was observed in enzymatic pre-refining step.
Farshad Sarkhosh rahmani; Mohammad Talaeipoor
Abstract
This study was carried out with the aim of producing fluting paper from wheat straw soda–AQ pulp and OCC pulp blend. Handsheets at 120 gr/m2 basis weight were made by blending the unbleached wheat straw pulp with OCC pulp at ratios of 25, 50 and 75%. Physical and strength properties of these papers ...
Read More
This study was carried out with the aim of producing fluting paper from wheat straw soda–AQ pulp and OCC pulp blend. Handsheets at 120 gr/m2 basis weight were made by blending the unbleached wheat straw pulp with OCC pulp at ratios of 25, 50 and 75%. Physical and strength properties of these papers were measured and compared to unblended papers. Results indicated that, paper properties were considerably affected by incorporation of the wheat straw pulp. In other words, in case of utilizing wheat straw soda – AQ pulp in OCC pulp , acceptable physical and strength properties can be produced , so that , the incorporated 75% of wheat straw pulp to OCC pulp, the best thickness, air resistance, roughness, tear index, burst index, folding endurance, breaking length, CMT and RCT can be achieved. According to obtained results, unbleached wheat straw soda – AQ pulp can be used not only to enhance the physical and strength properties of fluting paper but also as a lignocellusic source for making fluting paper.