Volume 39 (2024-2025)
Volume 38 (2023-2024)
Volume 37 (2022-2023)
Volume 36 (2021-2022)
Volume 35 (2020-2021)
Volume 34 (2019-2020)
Volume 33 (2018-2019)
Volume 32 (2017-2018)
Volume 31 (2016-2017)
Volume 30 (2015-2016)
Volume 29 (2014-2015)
Volume 28 (2013-2014)
Volume 27 (2012-2013)
Volume 26 (2011-2012)
Volume 25 (2010-2011)
Volume 24 (2009-2010)
Volume 23 (2008-2009)
Volume 22 (2007-2008)
Volume 21 (2006-2007)
Volume 20 (2005-2006)
Volume 19 (2004-2005)
Volume 18 (2003-2004)
Volume 17 (2002-2003)
Volume 16 (2002-2003)
Volume 15 (2001-2002)
Volume 14 (2001-2002)
Volume 13 (2001)
Volume 12 (2000-2001)
Volume 11 (2000-2001)
Volume 10 (2000-2001)
Volume 9 (2000)
Volume 8 (1999)
Volume 7 (1999)
Volume 6 (1998)
Volume 5 (1998)
Volume 4 (1997)
Volume 3 (1997)
Volume 2 (1996)
Volume 1 (1995)
Composite wood products
Investigation on the tensile properties and dimensional stability of polypropylene/wheat straw fiber/paper mill sludge composites

Habib alah Khademieslam; Mehdei Kalagar

Volume 31, SPRING 1 , March 2016, , Pages 67-77

https://doi.org/10.22092/ijwpr.2015.102674

Abstract
      In this investigation, tensile and physical properties of polypropylene (as matrix)/wheat straw fiber/paper mill sludge (as filler) composites was studied. The ratio of wheat straw fiber/ paper mill sludge was selected as 40/0, 30/10, 20/20, 10/30 and 0/40 (w/w) were used. Also, for better ...  Read More

Composite wood products
A study on physical properties of composites produced using recycled polymer filled with paper mill sludge composites

ELHAM MARZBAN MORIDANI; Mohammad Talaeipoor

Volume 29, Fall 3 , November 2014, , Pages 443-451

https://doi.org/10.22092/ijwpr.2014.6134

Abstract
    In this study, physical properties of composite produced using recycled polymer (polypropylene and polyethylene) filled with two types of paper mill sludge (sludge on the DAF and waste water sludge) were investigated. Three levels of paper sludge (15, 30 and 45 wt %) were used to produce composites. ...  Read More