Jafar Ebrahimpour Kasmani; Ahmad Samariha; Alireza Khakifirooz
Abstract
This study aimed to investigate the use of cellulose nanofibers and starch-nano-cellulose and polyacrylamide-nano-cellulose hybrid systems for the replacement of imported long chemical fibers in the production of these papers. In this study, imported long fiber chemical pulp was added to cotton pulp ...
Read More
This study aimed to investigate the use of cellulose nanofibers and starch-nano-cellulose and polyacrylamide-nano-cellulose hybrid systems for the replacement of imported long chemical fibers in the production of these papers. In this study, imported long fiber chemical pulp was added to cotton pulp at 4 levels. Cellulose nanofibers were added to cotton pulp at a 5% level with 1% starch and 0.1% with polyacrylamide. Three levels of cationic starch and three levels of cationic polyacrylamide were also used. From each of the treatments, 60 gm-2 handsheet were made finally the physical, mechanical and optical properties of the paper made from different pulps were compared. The results showed that with increasing nanocellulose individually, compared to imported long fibers, surface smoothness, tensile strength, bursting, tearing of paper increased and air resistance, folding resistance and opacity decreased. Increasing nanocellulose in combination with cationic polyacrylamide increased the paper air resistance and surface area, tensile, burst, tear, and folding strength of the paper compared to imported long fibers, air resistance and opacity. With the increase of nanocellulose in combination with cationic starch, as compared to imported long fibers, surface smoothness, tensile strength, bursting, folding increased but opacity decreased. FE-SEM results also showed that with increasing percentage of cellulose nanofibers, the pores decreased significantly. As a result of the addition of 5% cellulose nanofibers the surface of the paper became smoother and the pores were filled relatively, confirming the results of surface smoothness and air resistance.
Pulp and paper
Yaghob Mamizadeh; Jafar Ebrahimpour Kasmani
Abstract
In textile industry the bellow comb fibers are located in a range in terms of their length and diameter that it can be used as proper raw material especially in paper dough industries; therefore, present study tries to consider improvement of durable paper's properties made of cellulosic nanofibers. ...
Read More
In textile industry the bellow comb fibers are located in a range in terms of their length and diameter that it can be used as proper raw material especially in paper dough industries; therefore, present study tries to consider improvement of durable paper's properties made of cellulosic nanofibers. In this consideration, the below comb fiber of pulp and paper imported chemical pulp are prepared from a company that is producing durable papers and they were transferred to laboratory. Cellulosic nanofiber has been prepared from Nano Novin Polymer Co., and it has been consumed at 4 levels of 0, 0.3, 0.6 and 0.6%. After mixing pulp with cellulosic nanofiber at determined percentages, the handmade 90 g.m-1 papers were made and eventually physical and mechanical properties of these papers were evaluated. The results showed that enhancement of cellulosic nanofibers till 0.9% has led to enhancement of tensile strength, bursting resistance, tearing strength and folding strength comparing to control sample up to 22.7, 38.9, 7.7 and 384% respectively. Increasing the amount of cellulosic nanofibers up to 0.9% the surface smoothness has increased up to 7.9% comparing to control; moreover, water absorption and pores were reduced as 69 and 7.9% respectively. The SEM results showed that enhancement of cellulosic nanofiber percentage has led to reduction of pores.
