Physics and anatomy
Fardad Golbabaei; Ghanbar Ebrahimi; Abolfazl Kargarfard; Abbas Fakhryan roghani
Abstract
Oak (Quercus castaneafolia C.A. Mey) is one of the most important broadleaf species in the Caspian Forests of Iran. The wood of oak is highly appreciated in domestic wood industries especially furniture industry.
In this study which is a part of the extensive surveying project of the main wood engineering ...
Read More
Oak (Quercus castaneafolia C.A. Mey) is one of the most important broadleaf species in the Caspian Forests of Iran. The wood of oak is highly appreciated in domestic wood industries especially furniture industry.
In this study which is a part of the extensive surveying project of the main wood engineering properties of Iranian woods, the natural variations of strength and related properties of two trees of about 70 years old from Shafarod Forests in Gilan province were investigated.
The properties were determined from tests on small clear specimens in the green and dry conditions following the ASTM Standard. The mechanical and physical properties studied include: stress at elastic limits, modulus of rupture, modulus of elasticity and modulus of elasticity in static bending; shear parallel to grain, maximum crushing strength, fiber stress at proportional limit and modulus of elasticity in compression parallel to grain; compression perpendicular to grain and specific gravity.
The results of statistical analysis showed that the mechanical strength of the wood was found to be affected by percentage of moisture content of wood specimens, height of sample tree and to some extend by geographical; cal direction.
Physics and Mechanical Wood
Fardad Golbabaei; Amir Nourbakhsh; Abbas Fakhryan roghani; Shahrokh Falahdoost
Abstract
Beech (Fagus orientalis Lipsky L.) is one of the most important broadleaf species in the Caspian Forests of Iran. The wood of Beech is highly appreciated in domestic wood industries especially furniture industry. In this study which is a part of the extensive surveying project of the main wood engineering ...
Read More
Beech (Fagus orientalis Lipsky L.) is one of the most important broadleaf species in the Caspian Forests of Iran. The wood of Beech is highly appreciated in domestic wood industries especially furniture industry. In this study which is a part of the extensive surveying project of the main wood engineering properties of Iranian woods, the natural variations of strength and related properties of three trees of about 75 years old from Sangdeh Forests in Mazandran province were investigated.The properties were determined from tests on small clear specimens in the green and dry conditions following the ASTM Standard. The mechanical and physical properties studied include: stress at elastic limits, modulus of rupture, modulus of elasticity and modulus of elasticity in static bending; shear parallel to grain, maximum crushing strength, fiber stress at proportional limit and modulus of elasticity in compression parallel to grain; compression perpendicular to grain and specific gravity.The results of statistical analysis showed that the mechanical strength of the wood was found to be affected by percentage of moisture conten of wood specimens, height of sample tree and to some extend by geographical; direction.
Abdolrahman Hosseinzadeh; Nooshin Toghraie; Fardad Golbabaei; Nayeralsadat Sadraei
Abstract
In order to investigate The properties of wood eight-nineteen-years- old trees of Eucalyptus microtheca from De-hnow exprimental Plantation located 160 Km. South west of Shiraz were selected randomly and fell two from each of the four blocks. From each tree, 10 cm thick cross-sectional discs at several ...
Read More
In order to investigate The properties of wood eight-nineteen-years- old trees of Eucalyptus microtheca from De-hnow exprimental Plantation located 160 Km. South west of Shiraz were selected randomly and fell two from each of the four blocks. From each tree, 10 cm thick cross-sectional discs at several different heights (3 metres intervals) were cut and together with remaining boles then transfered to the Alborz Research Center-Karaj for laboratory studies. The laboratory studies included determination of physical, anatomical and mechanical properties as well as chemical compositions of wood. The mechanical properties were evaluated on the ASTM samples for air-dry and green conditions. The following conclusions were drawn from this study:E. microtheca from one site in southern region of Iran has an average specific gravity of 0.804, fiber length of 0.811 mm, fiber diameter of 15.9 mm, lumen diameter of 5.7 mm, cell wall, thickness 5 mm, cellulose content of 44.47 percent.It was found that the mean values of modulus of rupture, modulus of elasticity and compression strength-parallel to grain tested at green condition were 72.50 MPa, 8066.6 MPa and 38.5 MPa and air-dried condition were 120.7 MPa, 12013.8 MPa and 69.80 MPa respectively.Data are also presented on other mechanical properties such as impact strength, nail withdrawal cleavage and et
Abdolrahman Hosseinzadeh; Habialah Arabtabar; Fardad Golbabaei; Hossein Familian; Nayeralsadat Sadraei; Masoudreza Habibi
Abstract
Eight-nineteen-year-old trees from Eucalytus steriaticalyx from Dehnow experimental Plantation located 160 Km. South west of Shiraz were selected randomly and fell two from each of the four blocks. From each tree, 10 cm thick cross-sectional discs at several different heights (3 meters intervals) were ...
Read More
Eight-nineteen-year-old trees from Eucalytus steriaticalyx from Dehnow experimental Plantation located 160 Km. South west of Shiraz were selected randomly and fell two from each of the four blocks. From each tree, 10 cm thick cross-sectional discs at several different heights (3 meters intervals) were cut and together with remaining boles then transferred to the Alborz Research Center-Karaj for laboratory studies. The laboratory studies included determination of physical, anatomical and mechanical properties as well as chemical compositions of wood.The mechanical properties were evaluated on the ASTM samples for air-dry and green conditions. The following conclusions were drawn from this study:E. steriaticalyx from one site in southern region of Iran has an average specific gravity of 0.935, fiber length of 0.881 mm, fiber diameter of 16.063 m, lumen diameter of 4.465 m, cell wall thickness 5.789 m, cellulose content of 47.07 percent.It was found that the mean values of modulus of rupture, modulus of elasticity and compression strength-parallel to grain tested at green condition were 67.35 MPa, 8649 MPa and 35.36 MPa and air- condition were 117.53 MPa, 13397 MPa and 72.31 MPa respectively.Data are also presented on other mechanical properties such as impact strength, nail withdrawal cleavage and etc.
Physics and anatomy
Abdolrahman Hosseinzadeh; Hossein Familian; Kamyar Salehi; Abbas Fakhryan roghani; Fardad Golbabaei; Habibalah Arabtabar; Nayeralsadat Sadraei
Abstract
Eight-nineteen-year-old trees from Eucalyptus intertexta from Sarab bahman experimental Plantation located 160 Km. South west of Shiraz were selected randomly and fell two from each of the four blocks. Form each tree, 10 cm. thick cross-sectional discs at several different heights (3 meters intervals) ...
Read More
Eight-nineteen-year-old trees from Eucalyptus intertexta from Sarab bahman experimental Plantation located 160 Km. South west of Shiraz were selected randomly and fell two from each of the four blocks. Form each tree, 10 cm. thick cross-sectional discs at several different heights (3 meters intervals) were cut and together with remaining boles then transferred to the Alborz Research Center-Karaj for laboratory studies. The laboratory studies included determination of physical, anatomical and mechanical properties as well as chemical compositions of wood. The mechanical properties were evaluated on the ASTM methods for air-dry and green conditions. The following conclusions were drawn from this study:E. intertexta from one site in southern region of Iran has an average specific gravity of 0.86, fiber length of 0.71 mm, fiber diameter of 25.26 mm, lumen diameter of 4.04 mm, cell wall thickness 5.62 mm, cellulose content of 45.95; lignin 28.2; extractives soluble in alcohol - Banzen 4.28 and ash 0.62 percent.It was found that the mean values of modulus of rupture, modulus of elasticity and compression strength-parallel to grain tested at green condition were 74.21 MPa, 8454 MPa and 38.52 MPa and air-dried condition were 123.47 MPa, 14667 MPa and 77.99 MPa respectively. Data are also presented on other mechanical properties such as impact strength, nail withdrawal cleavage and etc.
