Physics and anatomy
Hossein Familian; Abdolrahman Hosseinzadeh; Mohammad hassan Asareh; Sayed mosa Sadeghi; Kamyar Salehi
Abstract
Ziziphus spina- christi of the family Rhamnaceae is widely distributed especially in the southern region of Iran and considered as one of the most drought - resistant sub species of the country. This investigation is the first attempt to study wood properties of this species, in order to contribute to ...
Read More
Ziziphus spina- christi of the family Rhamnaceae is widely distributed especially in the southern region of Iran and considered as one of the most drought - resistant sub species of the country. This investigation is the first attempt to study wood properties of this species, in order to contribute to a better understanding of it. It seems necessary to recognize the best utilization of this wood that are potentially available and easy to caltivate in Iran.The results of this study revealed that Ziziphus spina - christi is a diffuse - porous with pores round to oval, dense, hard and fine - textured wood. The length of vessel elements is medium, and the diameter relative high, few vessels per unit area and the type of perforation plates is simple. Parenchyma scanty paratracheal, vasicentric and rarely aliform. Libriform fibers length medium, thin to thick - walled. Rays 1-2 cells wide with medium length and not visible with nakedeye, crystals are common in most rays. In this species also percentages of cellulose and lignin are high but ash and extractive soluble in acetone content was found to be low.
Pulp and paper
Kamyar Salehi; Abdolrahman Hosseinzadeh; Hossein Familian
Abstract
In order to investigate the possibility of utilizing cotton stem in cellulosic industries chemical, physical and anatomical properties of cotton stem (var. varamin) was investigated.Cotton wood fiber length, fiber diameter, lumen diameter and cell wall thickness was measured at 840 mm, 23.9mlm, ...
Read More
In order to investigate the possibility of utilizing cotton stem in cellulosic industries chemical, physical and anatomical properties of cotton stem (var. varamin) was investigated.Cotton wood fiber length, fiber diameter, lumen diameter and cell wall thickness was measured at 840 mm, 23.9mlm, 16/11mm, and 3/9mm respectively.Cotton stem oven-dry density, basic density, and air-dry density were measured at 0/44 gr./cm3, 0.4Ogr/cm3, and .42gr/cm3.Shrinkage and swelling was measured at 7.7 %, 8.3% and porosity was measured at 70.5%.Chemical composition was as follow: cellulose 52%, lignin 29.2%, ash 104% and extractives 6.8%.Anatomical features were as follow: Growth ring boundaries distinct or absent Wood diffuse-porous. Vessels in diagonal or radial pattern grouping:partly solitary partly in radial multiples of 2-4-6 or very small cluster Simple perforation plate. Intervesse pit alternate. Intervessel pit size: minute -< 4mm. Vestured pits absent. Vessel-ray pits with much reduced borders to apparently simple Helical Thickening absent. Mean tangential diameter of vessel lumina 50-100mm. Vessels per square millimeter 20-40 vessels. Mean vessel element length - < 350mm. Tyloses Gums & deposits absent. Fiber with simple to minutely bordered pits. Helical thickening in ground tissue fibers absent.Nonseptate fiber present. Fibers very thin walled. Rays with multi seriate portion as wide as uniseriate portion. Aggregate rays absent. Ray height> 1mm. Body ray cells procumbent with over 4 rows of upright And square marginal cells Ray per millimeter 4-12/mm.
Physics and anatomy
Saeed Mahdavi; masoudreza habibi
Abstract
Growing interest in wood and paper consumption in Iranian industries and forest utilization constraints call for alternative approaches on the exploitation trend. Lately, industrial countries consider utilization of small diameter trees and branches residual wood. European hornbeam with vast coverage ...
Read More
Growing interest in wood and paper consumption in Iranian industries and forest utilization constraints call for alternative approaches on the exploitation trend. Lately, industrial countries consider utilization of small diameter trees and branches residual wood. European hornbeam with vast coverage among the other species in Iran can be an alternative to tree shortage of raw material for the sector. This study showed that the branch fiber dimensions have significantly differed compare to trunk.Average fiber length was measured as 1.76mm for breast height of three trunks and 1.43 mm for two branches samples. Fiber length increased from crown downward to the stump and also from pith to bark, but there was a significant negative correlation between the variations and tree height. Fiber length increased in trees of up to 30 years of age and decreased afterwards. There is no orderly pattern from tree base to the upper branches.Runkel and flexibility coefficients of branch were better than trunk despite of higher fiber dimensions in trunk.
Physics and anatomy
Ahmad Jahan latibari; Fardad Golbabaei; Mohammad reza Amini
Abstract
Pinus teada, which was planted in Pelembera region, shows promising both in growth rate and adaptability. Even though the fiber geometry of P. teada wood in its native growth region is excellent, but for utilization of this wood in pulping, the knowledge of its technological characteristics especially ...
Read More
Pinus teada, which was planted in Pelembera region, shows promising both in growth rate and adaptability. Even though the fiber geometry of P. teada wood in its native growth region is excellent, but for utilization of this wood in pulping, the knowledge of its technological characteristics especially fiber geometry is required.Two trees of this species were randomly selected from Pelembera forests plantation in Gilan and after felling were cut in smaller bolts and transferred to wood &paper research laboratory, research institute of forests and rangelands. Five cross-sections with the thickness of 15 cm were cut from each tree and the cross-sections were used for selection of samples. Fiber geometry measurement samples were prepared from every five annual rings and from each sample, springwood (early wood) and summer wood (late wood) sample were cut separately. Preparations of fiber geometry samples were according to procedure developed by Franklin (1954) and from each sample the dimension of 30 complete and unbroken trachieds was measured.Trachied length, diameter, cell wall thickness and lumen diameter was measured for different elevation in tree and different growth rings in cross-section.Dimension of 3,00 trachieds were measured totally.Average trachied length, diameter, lumen diameter and cell wall thickness of early wood were measured at 3.65mm, 38.97 mm, 28.94 mm and 3.72 mm respectively. Related values for late wood is as follow: trachied length 3.84mm; diameter, 35.54 /lm; lumen diameter, 22.96 mm; and cell wall thickness, 6.29 mn. Average annual growths were measured at 5.66 mm and late wood percentage at 24.13. Felting, flexibility and runkel coefficients were calculated at 97.96, 73.48, and 26.74 respectively. The result of this study indicates that all measured properties increases with increasing the height of tree and from center (pith) toward outer regions (bark). However all the measured values decreased at highest as well as outer locations.Statistical analysis indicated that the difference in measured properties at different heights of trees from center to the bark is significantly different at 1% level.
Pulp and paper
Saeed Mahdavi; Abdolrahman Hosseinzadeh; Hossein Familian; masoudreza habibi
Abstract
Cross sectional disks were cut at breast height from three 17-year-old trees of E.camaldulensis grown in Pasand research station in Mazandaran province. Ring width, wood density, and fiber dimension were measured for each two rings from pith to the bark. Overall average disks, fiber length, fiber width, ...
Read More
Cross sectional disks were cut at breast height from three 17-year-old trees of E.camaldulensis grown in Pasand research station in Mazandaran province. Ring width, wood density, and fiber dimension were measured for each two rings from pith to the bark. Overall average disks, fiber length, fiber width, lumen diameter, and cell wall thickness were measured at 758, 15.93, 8.63, and 3.65 micrometer respectively. Mean values for the oven dry and basic. Density was 0.708 g/cm3 and 0.552 g/cm3. Cross sectional \ growth rate and wood production for the trees were measured at 11.1 mm and 12.3 m3/ha./year respectively. Chemical compositions of the wood consist or cellulose, lignin, extractives (in acetone soluble) and ash were measured at 47.44%, 30.87%, 6.96%, and 0.27% respectively. The result showed that E.camaldulensis is classified as short fiber hardwood with low frequency. Fiber dimensions and density slightly increased from pith to the bark. There was high significant correlation between cell wall thickness and density, while; there was no significant correlation between ring width and the others. Among the properties studied, cell wall thickness and fiber length showed the most variations.
Physics and anatomy
masoudreza habibi; Abdolrahman Hosseinzadeh; Ahmad Jahan latibari; Hossein Familian; Hossein Hosseinkhani
Abstract
In this study, annual growth, bark content, fiher dimensions of pine wood (P. eldarica) were measured. Annual ring thickness and bark content 4.95 mm, 12.15% are determined respectively. Fiber length, fiber diameter, lumen cell diameter, cell wall thickness were determined 2.26 mm, 39.63m 29.06 m and ...
Read More
In this study, annual growth, bark content, fiher dimensions of pine wood (P. eldarica) were measured. Annual ring thickness and bark content 4.95 mm, 12.15% are determined respectively. Fiber length, fiber diameter, lumen cell diameter, cell wall thickness were determined 2.26 mm, 39.63m 29.06 m and 5.28 m respectively. Also felting coefficient 58.59, tear coefficient 36.24% and flexibility coefficient 18.12%were measured. Trend of variations of fibers dimensions indicated that fibers longth increased with increasing tree height from butt to crown. Also this property increased from pith to tenth annuad ring then decreased toward of bark. Cell wall thickness decreased from butt to 2 m. height and then increased. Also cell wall thickness decreased from pith toward bark.
Chemistry of wood
Nooshin Toghraie; Abdolrahman Hosseinzadeh; Davood Parsapazhoh; Fardad Golbabaei
Abstract
To study saxaul wood properties in the various ecological regions of Iran twelve 10-22 years old sample trees (4 trees from each species) were selected and cut from three different areas around kerman. Physical, chemical and anatomical characteristics of wood samples were investigated. The results of ...
Read More
To study saxaul wood properties in the various ecological regions of Iran twelve 10-22 years old sample trees (4 trees from each species) were selected and cut from three different areas around kerman. Physical, chemical and anatomical characteristics of wood samples were investigated. The results of this investigation revealed that the initial moisture content before felling was 38.6% and the mean specific gravity based on oven dry weight and oven dry volume (WOD/VOD), oven dry and saturated weight Saxaul saturated volume (WOD/Vs ,WS/VS ), were studied for yellow, white and black and respectively. It is concluded that saxaul wood of Kerman province is heavy. The average longitudinal, radial and tangential shrinkage were surveyed. Wood periodicity of growth was determined to be 3-4 rings per year. Anatomical features were investigated by light microscopy and papermaking factors were determined. Fiber length, fiber diameter and lumen diameter were determined. These values lead to species with short and thick fibers. Chemical composition including percentage of cellulose, lignin, extractives and ash were revealed too.
Chemistry of wood
Hossein Familian; Abdolrahman Hosseinzadeh; Mohammad hassan Asareh; Saeed Mahdavi; Sayed mosa Sadeghi; Kamyar Salehi
Abstract
Ziziphus lotus of the family Rhamnaceae is distributed in the southern region of Iran and considered as one of drought - resistant tree species of the country. This investigation is the first attempt to study wood properties of this species, in order to contribute to a better understanding of it. The ...
Read More
Ziziphus lotus of the family Rhamnaceae is distributed in the southern region of Iran and considered as one of drought - resistant tree species of the country. This investigation is the first attempt to study wood properties of this species, in order to contribute to a better understanding of it. The results of this study revealed that Ziziphus lotus is a diffuse – porous with basic specific gravity medium and medium - textured wood. The length of vessel elements are medium, the diameter of vessel elements is small, porous with pores round to oval, intervessel pilting, opposite and intermediate, 20 vessels per square millimeter, simple perforation plates, vessel - ray pits similar to intervessel pits in size and shape and half bordered; Vascular tracheids present, there are rarely tyloses and Gums in vessels. Fibers with simple to minutely bordered pits, thin - to thick – walled and fiber lengths short; Parenchyma scanty paratracheal, vasicentric and rarely aliform; Ray uniseriate and sometimes biseriate, ray height is short, rays with procumbent, Square and upright cells mixed throughout the ray and one Prismatic crystals in chambered upright and square ray cells, rays 12 per mm, silica bodies in ray cells; There are 7-10 Schizogenous canals in pith.In this species also percentages of cellulose are high but ash and extractive soluble in acetone content was found to be low.
Chemical conversion
Abbas Fakhryan roghani; Abdolrahman Hosseinzadeh; Fardad Golbabaei
Abstract
Threes, six and 12 years old sample trees of Populos deltoides 77.51 were randomly selected and felled at the safrabasteh research station located in Gilan province. Sample tree transferred to the Alborz research center- Karaj for Laboratory studies; The Laboratory studies included determination of physical, ...
Read More
Threes, six and 12 years old sample trees of Populos deltoides 77.51 were randomly selected and felled at the safrabasteh research station located in Gilan province. Sample tree transferred to the Alborz research center- Karaj for Laboratory studies; The Laboratory studies included determination of physical, anatomical and chemical composition of revealed that with increasing trees age, fiber length and fiber diameter increased. There was significant differences among three ages studied at I percent probability.
Chemistry of wood
Nooshin Toghraie; Abdolrahman Hosseinzadeh; Khashayar Keimosa
Abstract
In this research, worked on two juniper trees (Juniperus exelsa L.) in Bakhtiari region as a part of Irano-touranian district. We noted the Sp. Gr. Of wood based on saturated volume 0.52, porosity 64%, volume shrinkage and swelling 10% and 11.3% resp. Anatomical structure and microscopic characteristics ...
Read More
In this research, worked on two juniper trees (Juniperus exelsa L.) in Bakhtiari region as a part of Irano-touranian district. We noted the Sp. Gr. Of wood based on saturated volume 0.52, porosity 64%, volume shrinkage and swelling 10% and 11.3% resp. Anatomical structure and microscopic characteristics had been investigated incidentally. The average length of tracheids 1.3 mm. And the diameter, lumen diameter and thickness of cell wall of tracheids were determined 23.4, 16.3 and 3.5 microns resp. the major pulp indexes are calculated via related formulas.
Physics and anatomy
Saeed Mahdavi; Abdolrahman Hosseinzadeh; Abbas Fakhryan roghani; masoudreza habibi
Abstract
In order to evaluate reed as a raw material for wood & paper industries, three main regions of Iran consist of south, North and East were selected for this study. Phragmites australis is dominant species in these regions and this study concentrated on it as well.Chemical components and biometry of ...
Read More
In order to evaluate reed as a raw material for wood & paper industries, three main regions of Iran consist of south, North and East were selected for this study. Phragmites australis is dominant species in these regions and this study concentrated on it as well.Chemical components and biometry of fibers were determined with four and thirty replications respectively. Statistical analysis showed that there were no significant differences among three regions in fiber length and lumen diameter but reversely fiber width and cell wall thickness showed significant differences. The highest fiber length mean was 1.39mm. For North (Anzali) Coefficients of papermaking of fibers also were calculated for each region. Biometerical fiber results, showed that P. australis has good fiber compare to the Iranians hardwoods as papermaking.The results also showed that there are significant differences between regions and subregions at %5 level. North had the highest and lowest cellulose and lignin contents respectively. These results also proved that P.australis is one of the best Iranians' raw materials as cellulose and lignin contents between the others.
Physics and anatomy
Abdolrahman Hosseinzadeh; Hossein Familian; Kamyar Salehi; Abbas Fakhryan roghani; Fardad Golbabaei; Habibalah Arabtabar; Nayeralsadat Sadraei
Abstract
Eight-nineteen-year-old trees from Eucalyptus intertexta from Sarab bahman experimental Plantation located 160 Km. South west of Shiraz were selected randomly and fell two from each of the four blocks. Form each tree, 10 cm. thick cross-sectional discs at several different heights (3 meters intervals) ...
Read More
Eight-nineteen-year-old trees from Eucalyptus intertexta from Sarab bahman experimental Plantation located 160 Km. South west of Shiraz were selected randomly and fell two from each of the four blocks. Form each tree, 10 cm. thick cross-sectional discs at several different heights (3 meters intervals) were cut and together with remaining boles then transferred to the Alborz Research Center-Karaj for laboratory studies. The laboratory studies included determination of physical, anatomical and mechanical properties as well as chemical compositions of wood. The mechanical properties were evaluated on the ASTM methods for air-dry and green conditions. The following conclusions were drawn from this study:E. intertexta from one site in southern region of Iran has an average specific gravity of 0.86, fiber length of 0.71 mm, fiber diameter of 25.26 mm, lumen diameter of 4.04 mm, cell wall thickness 5.62 mm, cellulose content of 45.95; lignin 28.2; extractives soluble in alcohol - Banzen 4.28 and ash 0.62 percent.It was found that the mean values of modulus of rupture, modulus of elasticity and compression strength-parallel to grain tested at green condition were 74.21 MPa, 8454 MPa and 38.52 MPa and air-dried condition were 123.47 MPa, 14667 MPa and 77.99 MPa respectively. Data are also presented on other mechanical properties such as impact strength, nail withdrawal cleavage and etc.
Chemistry of wood
Abdolrahman Hosseinzadeh; Abbas Fakhryan roghani; Fardad Golbabaei; Nayeralsadat Sadraei
Abstract
Eight-nineteen-year-old trees from Eucalyptus camaldulensis from De- hnow experimental Plantation located 160 Km. South west of Shiraz were selected randomly and fell two from each of the four blocks. Form each tree, 10 cm. thick cross-sectional discs at several different heights (3 meters intervals) ...
Read More
Eight-nineteen-year-old trees from Eucalyptus camaldulensis from De- hnow experimental Plantation located 160 Km. South west of Shiraz were selected randomly and fell two from each of the four blocks. Form each tree, 10 cm. thick cross-sectional discs at several different heights (3 meters intervals) were cut and together with remaining boles then transferred to the Alborz Research Center-Karaj for laboratory studies. The laboratory studies included determination of physical, anatomical and mechanical properties as well as chemical compositions of wood.The mechanical properties were evaluated on the ASTM methods for air-dry and green conditions. The following conclusions were drawn from this study:E. camaldulensis from one site in southern region of Iran has an average specific gravity of 0.806, Fiber length of 1.043 mm, fiber diameter of 15.38 mm, lumen diameter of 4.84 mm, cell wall thickness 5.29 mm, cellulose content of 42.5 percent. It was found that the mean values of modulus of rupture, modulus of elasticity and compression strength-parallel to grain tested at green condition were 81.19 MPa, 10887 MPa and 67.39 MPa respectively.Data are also presented on other mechanical properties such as impact strength, nail withdrawal cleavage and etc.
Physics and anatomy
Abdolrahman Hosseinzadeh; Ahmad Jahan latibari; Hossein Familian; Saeed Mahdavi; Sayed javad Sepidehdam
Abstract
In this investigation, samples were collected from three tamarix species including: Tamarix meyeri from northern part and T. aphylla and T. strica from the southern parts of Iran. Nine dominat tamarix trees were felled, three for each species. From each tree 10 cm thick cross-sections at three different ...
Read More
In this investigation, samples were collected from three tamarix species including: Tamarix meyeri from northern part and T. aphylla and T. strica from the southern parts of Iran. Nine dominat tamarix trees were felled, three for each species. From each tree 10 cm thick cross-sections at three different heights (5, 25 and 50% of the tree height) were cut. These disks were used for anatomical study, and remaining logs were transferred to laboratory for physical and chemical tests. The results of this study revealed that wood from these three species of tamarix is considered unsuitable for pulping and in the case, It is used for pulping, the pulp yield will be low and the strength of the pulp will be quite low, which is the consequence of short and thick-walled fibers that will not provide adequate fiber bonding. In addition, because of the large diameter and thick-walled fibers, the strength properties of the woods are also low.
