@article { author = {Fakhryan roghani, Abbas and Hosseinzadeh, Abdolrahman and Golbabaei, Fardad}, title = {WOOD PROPERTIES OF POPULUS DELTOIDES 77.51 GROWN IN GILAN, IRAN}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {15}, number = {15-شماره 278}, pages = {1-17}, year = {2001}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2018.117508}, abstract = {Threes, six and 12 years old sample trees of Populos deltoides 77.51 were randomly selected and felled at the safrabasteh research station located in Gilan province. Sample tree transferred to the Alborz research center- Karaj for Laboratory studies; The Laboratory studies included determination of physical, anatomical and chemical composition of revealed that with increasing trees age, fiber length and fiber diameter increased. There was significant differences among three ages studied at I percent probability.}, keywords = {POPULUS DELTOIDES,PHYSICAL,ANATOMICAL AND CHEMICAL COMPOSITION}, title_fa = {خصوصیات شیمیایی، فیزیکی و آناتومیکی صنوبر دلتوئیدس کلن 77.51}, abstract_fa = {سه اصله درخت 4، 6 و 12 ساله صنوبر دلتوئیدس Populus deltoids کلن 77.51 به طور تصادفی از ایستگاه تحقیقات صنوبر صفرا بسته واقع در استان گیلان قطع و جهت بررسی خصوصیات آناتومیکی، شیمیایی و فیزیکی به آزمایشگاه شیمی چوب و کاغذ بخش تحقیقات علوم چوب و کاغذ موسسه تحقیقات جنگلها و مراتع انتقال داده شد.میانگین طول الیاف درخت 4 ساله 1.02 میلیمتر، 6 ساله 1.17 میلیمتر و 12 ساله 1.29 میلیمتر اندازه گیری شد. میانگین قطر الیاف بین 34.45-28.67 میکرون، قطر حفره سلولی بین 21.96-19.56 میکرون و ضخامت دیواره سلولی بین 6.24-3.99 میکرون بدست آمد. بین طول الیاف درختان در سه سن بهره برداری 4، 6 و 12 ساله اختلاف معنی داری در سطح1% بدست آمد.میانگین سلولز چوب درخت 4 ساله 51.23 درصد، 6 و 12 ساله به ترتیب 52.83 و 51.78 درصد و میانگین لیگنین این درختان به طور متوسط حداقل 22.03 و حداکثر 23.46 درصد اندازه گیری شد. مواد استخراجی این درختان بین 2.85-2.41درصد و خاکستر آنها بین 0.60-0.27 درصد بدست آمد.وزن مخصوص خشک درختان 4 ساله 0.331، 6 ساله 0.370 و 12 ساله g/cm3 0.376 و وزن مخصوص بحرانی آنها 0.308،0.331 و g/cm3 0.336 به ترتیب برای درختان با دوره بهره برداری 4، 6 و 12 ساله تعیین شد.}, keywords_fa = {خواص چوب ارس Juniperus exelsa در محدوده ایرانی- تورانی}, url = {https://ijwpr.areeo.ac.ir/article_117508.html}, eprint = {https://ijwpr.areeo.ac.ir/article_117508_12fbdd46a331df5109bcf75b320bc7cf.pdf} } @article { author = {Toghraie, Nooshin and Hosseinzadeh, Abdolrahman and Keimosa, Khashayar}, title = {JUNIPERUS EXELSA L.: WOOD STRUCTURE AND PHYSICAL PROPERTIES IN IRANO-TORANI REGION}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {15}, number = {15-شماره 278}, pages = {20-31}, year = {2001}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2018.117509}, abstract = {In this research, worked on two juniper trees (Juniperus exelsa L.) in Bakhtiari region as a part of Irano-touranian district. We noted the Sp. Gr. Of wood based on saturated volume 0.52, porosity 64%, volume shrinkage and swelling 10% and 11.3% resp. Anatomical structure and microscopic characteristics had been investigated incidentally. The average length of tracheids 1.3 mm. And the diameter, lumen diameter and thickness of cell wall of tracheids were determined 23.4, 16.3 and 3.5 microns resp. the major pulp indexes are calculated via related formulas.}, keywords = {JUNIPER. JUNIPERUS EXELSA,WOOD ANATOMY,physical properties}, title_fa = {خواص چوب ارس Juniperus exelsa در محدوده ایرانی - تورانی}, abstract_fa = {این تحقیق در مورد دو پایه از درختان ارس در منطقه چهارمحال و بختیاری، به عنوان بخشی از منطقه ایرانی - تورانی انجام شده است. بر پایه نتایج این تحقیق جرم ویژه نسبی چوب 0.52، تخلخل 64%، میزان همکشیدگی و واکشیدگی حجمی به ترتیب 10 و 11.3 درصد بدست آمد. همچنین ساختمان آناتومیک چوب بررسی و خصوصیات میکروسکوپی چوب همراه با تصاویر میکروسکوپی برشهای مختلف طولی و عرضی چوب ارایه شده است. طول متوسط تراکئیدها در این منطقه 1.3 میلیمتر، قطر تراکئید، قطر حفره و ضخامت دیواره سلولی به ترتیب 23.9، 16.3 و 3.5 میکرون تعیین شد. ضرایب مهم کاغذسازی نیز از طریق روابط مربوطه محاسبه شده است.}, keywords_fa = {ارس,Juniperus exelsa L,Juniperus,آناتومی چوب,خواص فیزیکی چوب}, url = {https://ijwpr.areeo.ac.ir/article_117509.html}, eprint = {https://ijwpr.areeo.ac.ir/article_117509_9d3a9097641e97a39f2cd9ebc7b419db.pdf} } @article { author = {Golbabaei, Fardad and Hosseinzadeh, Abdolrahman and Nourbakhsh, Amir and Hosseinkhani, Hossein and Fakhryan roghani, Abbas}, title = {VARIATION IN MECHANICAL PROPERTIES OF HORNBEAM (CARPINUS BETULUS L.) WOOD GROWN AT DIFFERENT ELEVATION OF ASALEM FORESTS (GILAN), IRAN}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {15}, number = {15-شماره 278}, pages = {33-60}, year = {2001}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2001.117510}, abstract = {In this study physical and mechanical properties of Hornbeam (Carpinus betulus L.) grown at three different elevations of Asalem Forests located at the north west of Gilan were investigated following the ASTM Standard. Sample trees were selected from 3 different elevations, at different height of trees, at 4 different geographical directions of the stems and 2 different moisture contents.The results of statistical analysis revealed that properties of Hornbeam wood from this region was influenced by elevations and to the lessees extend to geographical direction of wood specimens and tree height.  }, keywords = {hornbeam,PHYSICAL AND MECHANICAL PROPERTIES}, title_fa = {تغییرات ویژگیهای مهندسی چوب گونه ممرز (Carpinus betulus l) در سه منطقه ارتفاعی جنگلهای اسالم (گیلان)}, abstract_fa = {اندازه گیری خواص مکانیکی چوب گونه ممرز در منطقه اسالم گیلان با رعایت استاندارد ASTM آیین نامه D143-83 در مورد نمونه های تهیه شده از سه ارتفاع 350، 700 و 1200 متری سطح دریا در دو حالت سبز و خشک (خشک شده در هوای آزاد) انجام و برای تعیین تاثیر عوامل موثر رطوبت، جهات جغرافیایی، ارتفاع تنه و ارتفاع رویشگاه، مشاهدات حاصل از آزمایشهای با استفاده از طرح فاکتوریل در قالب بلوکهای کاملا تصادفی مورد تجزیه و تحلیل واقع و با استفاده از گروه بندی دانکن گروه بندی شد.نتایج آزمایشهای و تجزیه و تحلیل آماری نشان می دهد که خواص مکانیکی چوب گونه ممرز در جنگلهای اسالم تحت تاثیر ارتفاع رویشگاه بوده و با افزایش ارتفاع منطقه میزان آن کاهش می یابد که با تغییرات وزن مخصوص مطابقت دارد. در حالی که، اثرات جهات جغرافیایی و ارتفاع تنه درخت بر خواص چوب کم و گهگاه از نظر آماری اختلاف معنی داری ندارند.  }, keywords_fa = {ممرز,خواص فیزیکی و مکانیکی,اسالم}, url = {https://ijwpr.areeo.ac.ir/article_117510.html}, eprint = {https://ijwpr.areeo.ac.ir/article_117510_4a3122feff41fd226417eb0053829ce7.pdf} } @article { author = {Nourbakhsh, Amir and Hosseinzadeh, Abdolrahman and Jahan latibari, Ahmad and Golbabaei, Fardad and Kargarfard, Abolfazl and Hosseinkhani, Hossein}, title = {INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM LIGNOCELLULOSIC SOURCES IN SOURTHERN REGION OF IRAN (2) REPORT 2: THE POTENTIAL OF DATE PALM RESIDUES AND PROSOPIS (MESQUITE) WOOD IN PARTICLEBOARD INDUSTRY}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {15}, number = {15-شماره 278}, pages = {61-87}, year = {2001}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2001.117511}, abstract = {In this experiment the optimum condition of particleboard uom Date palm residues and prosopis (Mesquite) produced in southern part of Iran was investigated. Variable factors as type of raw-material (Date palm and prosopis), resin content (9, 10 and 11 percent) and press time (5, 6 and 7 minutes) and total of 18 combinations of variables were investigated.Other factors such as type of resin (UF), hardner content (2 percent) type of hardner (NH4CI)press closing time (4.5 mm/sec.), board density (0.7gr/cm3) press pressure (30 kg/cm2) and press temperature (160 C) were held constant.All boards were tested according to DIN-68763 standard. The factorial experimental design at completely random blocks test was used. The results of this study could be summarized as follows: Increasing the resin content from 9 to 11 percent increased MOR, MOE and ID and decreased thickness swelling after two and 24 hours immersion in water.The highest internal bond (IB) was related to prosopis (Mesquite) boards made at 5 minute, prass time. As far as production of date plam and prosopis (Mesquite) wood is concerned, the results revealed that the polymerization of resin and wood is better at 11 percent resin content and 5 minutes of press time. Date palm residues are important with treatment process according to reference. NO. One. Shape and dimension of chipped and flaked particles of date palm residues are important, because type and characteristics of species are different, in the mean time, as date palm residues has very high bulk density and specific surfaces than prosopis (Mesquite) which it has inverse effect on both physical and mechanical properties, thus it should be considered during the process of particleboards production.  }, keywords = {PARTIBOARD,Date palm,PROSOPIS (MEQUITE),UREAFORMALDEYIDE,press time,RESIN CONTENT}, title_fa = {بررسی امکان ساخت تخته خرده از منابع لیگنوسلولزی جنوب ایران (توان بالقوه استفاده از ضایعات نخل و چوب کهور پاکستانی در صنعت تخته خرده چوب)}, abstract_fa = {در این بررسی شرایط بهینه ساخت تخته خرده چوب از ضایعات نخل و کهور پاکستانی موجود در قسمتهای جنوبی ایران با هدف تعیین ویژگیهای فیزیکی و مکانیکی تخته ها مورد مطالعه قرار گرفته اند.ماده چوبی بکار گرفته شامل ضایعات هرس درخت نخل و سرشاخه های کهور پاکستانی، رزین مورد استفاده 9، 10 و 11 درصد (بر اساس وزن خشک خرده چوب)، زمان پرس 5، 6 و 7 دقیقه به عنوان عامل متغیر در نظر گرفته شدند.نوع رزین (اوره - فرم آلدئید)، نوع و درصد هاردنر (سخت کننده) (کلرور آمونیوم بر مبنای 2 درصد وزن خشک چسب)، زمان بسته شدن پرس (4.5 میلیمتر بر ثانیه)، دانسیته تخته (0.7 گرم بر سانتیمتر مکعب)، فشار پرس (30 کیلوگرم بر سانتیمتر مربع) و درجه حرارت پرس (160 درجه سانتیگراد) به طور ثابت فرض گردیدند. تخته های ساخته شده مطابق با استاندارد DIN-68763 جهت تعیین ویژگیهای فیزیکی و مکانیکی مورد بررسی قرار گرفتند. نتایج به دست آمده نشان داده است که:- با افزایش میزان درصد چسب از 9 به 11 درصد مقاومت خمشی، مدول الاستیسته و چسبندگی داخلی افزایش یافته و واکشیدگی ضخامتی پس از 2 و 4 ساعت غوطه وری در آب کاهش یافته اند.- بیشترین میزان چسبندگی داخلی (IB) در گونه کهور پاکستانی در زمان پرس 5 دقیقه بدست آمده است.- با در نظر گرفتن ویژگیهای ذرات گونه های مورد بررسی مشاهده شد که شکل هندسی و ابعاد ذرات فلیک و چیپس در ضایعات نخل مهم می باشند. ضایعات نخل دارای دانسیته حجمی بالایی نسبت به گونه کهور پاکستانی بوده که تاثیر معکوس بر ویژگیهای فیزیکی و مکانیکی تخته های ساخته شده می گذارند، بنابراین باید در طی فرآیند تولید تخته خرده چوب این عامل مورد توجه قرار گیرد.}, keywords_fa = {تخته خرده چوب,ضایعات نخل,کهور پاکستانی,اوره- فرم آلدئید,درصد چسب,زمان پرس}, url = {https://ijwpr.areeo.ac.ir/article_117511.html}, eprint = {https://ijwpr.areeo.ac.ir/article_117511_a0920040dc52acb8e8ebe67bf9a14497.pdf} }