@article { author = {Ebrahimpour Kasmani, Jafar and Mahdavi, Saeed}, title = {The effect of nanoclay contents on properties of WPC made of MDF and particleboard wastes with recycled polyethylene and polypropylene}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {35}, number = {1}, pages = {1-10}, year = {2020}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2020.128211.1577}, abstract = {This research was carried out with aim of the effect of nano-clay (NC) content on mechanical, thermogravimetry (TG) and morphological properties of wood plastic composite (WPC) made of medium density fiberboard (MDF) and particleboard (PB) wastes and recycled polypropylene and polyethylene (HDPE). For this purpose, wastes of MDF and PB at 50 wt.% , recycled PP and HDPE at 50 wt.%, maleic anhydride grafted with polymers at a constant level of 3 wt.% and nanoclay at three different levels 3, 6, and 9 wt.% were blended by two-wire extruder. Afterward, standard test pieces were made using an injection molding machine and their mechanical properties and TGA were investigated. Scanning electron microscope (SEM) was applied to investigate the quality of nanoclay particles dispersion in the matrice as well as how the lignocellulosic and polymers are bonded at the surface of bonding. The results showed that tensile and flexural strength and their modulus of HDPE and PB composite significantly were increased by adding NC up to 3 wt.%, but the strengths were dropped in WPC's by increasing of NC content at 6 and 9 wt.%. The notched impact strength of WPC has been totally decreased by NC addition that indicates more fracture surface on WPC's. SEM micrographs revealed that porosity and cavities in WPC's especially were decreased at 9 wt.% NC, whereas it is clear an inappropriate dispersion and aggregation of NC in WPC. The thermal stability of WPC's was slightly improved at 3 wt.% NC and the residual after combustion increased compared to the control.}, keywords = {Waste of boards,Recycled Polymer,nano-clay,Strength,thermogravimetry,SEM}, title_fa = {تأثیر افزودن نانورس بر ویژگی‌های چوب پلاستیک ساخته شده از ضایعات تخته فیبر نیمه‌سنگین و تخته‌خرده‌چوب با پلی‌‌اتیلن و پلی‌پروپیلن بازیافتی}, abstract_fa = {این پژوهش با هدف بررسی ویژگی‌های مکانیکی، گرماسنجی وزنی و ریخت‌شناسی چوب پلاستیک ساخته‌شده از ضایعات تخته-خرده‌چوب و تخته فیبر نیمه سنگین و دو نوع پلیمر بازیافتی (پلی‌اتیلن سنگین و پلی‌پروپیلن) با افزودن نانورس انجام شد. برای این منظور50% وزنی ضایعات دو نوع تخته‌ مذکور، 50% وزنی پلیمر بازیافتی، 3% وزنی انیدرید مالئیک پیوند داده ‌شده با دو نوع پلیمر و نانورس در سه سطح 3، 6 و 9 درصد وزنی، به‌وسیله یک اکسترودر دو ماردون ناهمسوگرد با یکدیگر مخلوط شدند. سپس نمونه‌های آزمونی استاندارد با استفاده از پرس تزریقی ساخته شده و ویژگی‌های مکانیکی و تخریب گرمایی آن‌ها مورد بررسی قرار گرفت. به منظور بررسی کیفیت پراکنش ذرات نانورس در ماده زمینه پلیمری و همچنین نحوه اتصال ماده لیگنوسلولزی و پلیمری در سطح اتصال از یک میکروسکوپ الکترونی روبشی استفاده شد. نتایج نشان داد مقاومت کششی، خمشی و مدول آن‌ها در چندسازه پلی‌اتیلن بازیافتی و تخته‌خرده‌چوب با افزودن مقدار نانورس تا 3 درصد وزنی افزایش‌ یافته و سپس کاهش می‌یابد، در حالی که برای چوب پلاستیک ساخته شده از پلی‌پروپیلن بازیافتی و تخته‌فیبر نیمه سنگین با افزودن نانورس، روند تغییر مقاومت‌ها و مدول آن‌ها کاهشی بود. مقاومت به ضربه فاق‌دار چوب پلاستیک با افزودن نانورس همواره کاهش یافته است که حاکی از افزایش سطح شکست چندسازه‌ها است. بررسی تصاویر میکروسکوپی نیز نشان داد که با افزودن نانورس از تعداد حفرات و فضاهای خالی کمتر شده اما پراکنش نامناسب و تجمع ذرات نانورس به‌خصوص در سطح 9% محرز است. نتایج آزمون گرماسنجی وزنی حاکی از آن است که با افزایش 3% وزنی نانورس، ثبات حرارتی چوب پلاستیک نسبت به شاهد کمی بهبود یافته و مقدار ماده باقیمانده پس از احتراق نیز افزایش یافت.}, keywords_fa = {ضایعات تخته,پلیمر‌ بازیافتی,نانورس,مقاومت‌,گرماسنجی وزنی‌,میکروسکوپ روبشی}, url = {https://ijwpr.areeo.ac.ir/article_120891.html}, eprint = {https://ijwpr.areeo.ac.ir/article_120891_11fc98c3b190f197cc35e5f73f102a53.pdf} } @article { author = {armand, khadijeh and ghasemiyan, ali}, title = {P pulp bleaching whit hydrogen peroxide and sodium hypochlorite}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {35}, number = {1}, pages = {11-21}, year = {2020}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2020.128739.1587}, abstract = {In this research, the effect of sodium peroxide and sodium hypochlorite on the chemical-mechanical pulp bleaching (CMP) has been investigated. For this purpose, unbleached CMP pulp was produced from Mazandaran wood and paper mill, and bleaching with hydrogen peroxide and sodium hypochlorite was carried out in two levels of 3 and 4%, during both 60 and 90 minutes in 70°C at 8% consistency. In each treatment, 30 grams of pulp with hydrogen peroxide, sodium silicate, DTPA, sodium hydroxide and sodium hypochlorite for bleaching were prepared. In the following 60 gr/m2 hand sheets were prepared and the optical properties of hand sheets were measured and analyzed based on TAPPI.The results obtained from the review of optical properties of handsheets show that by increasing the bleaching time and the level of chemicals the optical properties was improved. So that the highest brightness and minimum yellowness were observed in the 4% and 90 minutes in bleaching whit hydrogen peroxide. the lowest opacity in the control sample. Resistance properties such as tensile, burst and tear strength of bleached paper were also increased.}, keywords = {brightness,hydrogen peroxide,OPACITY,Sodium Hypochlorite}, title_fa = {رنگبری خمیر کاغذ CMP با پروکسید هیدروژن و هیپو کلریت سدیم}, abstract_fa = {دراین تحقیق اثر استفاده از پروکسیدهیدروژن و هیپو‌کلریت سدیم بر رنگ‌بری خمیر کاغذ شیمیایی _ مکانیکی (CMP) بررسی شده است. بدین منظور خمیر کاغذ CMP رنگ‌بری نشده مخلوط پهن برگان از کارخانه چوب و کاغذ مازندران تهیه شد و با پروکسید‌هیدروژن و هیپو‌کلریت سدیم در دو سطح 3 و 4 درصد، در طی دو زمان 60 و 90 دقیقه، دمای 80 درجه سانتی گراد و درصد خشکی 8% رنگ‌بری گردید. به این ترتیب که در هر یک از تیمارها 30 گرم خمیر کاغذ همراه با پروکسید هیدروژن، سیلیکات سدیم، DTPA، هیدروکسید سدیم و هیپو‌کلریت سدیم برای رنگ‌بری آماده سازی شدند. در ادامه کاغذ دست‌ساز آزمایشگاهی با وزن پایه 60 گرم بر مترمربع تهیه و خواص نوری و مکانیکی آنها طبق آزمون TAPPI اندازه‌گیری و مقایسه شد. نتایج بدست آمده از بررسی ویژگی های نوری کاغذ دست‌ساز نشان می‌دهد که با افزایش زمان رنگ‌بری و سطح مواد شیمیایی ویژگی های نوری بهبود می‌یابد. به طوری که بیشترین روشنی و کمترین زردی در سطح 4 درصد و 90 دقیقه در رنگ‌بری با پروکسیدهیدروژن و بیشترین ماتی در نمونه شاهد مشاهده شد. همچنین ویژگی های مقاومتی مانند مقاومت به کشش، ترکیدن و پارگی کاغذ های رنگ‌بری شده افزایش یافت.}, keywords_fa = {پروکسید هیدروژن,روشنی,ماتی,هیپو‌کلریت سدیم}, url = {https://ijwpr.areeo.ac.ir/article_120909.html}, eprint = {https://ijwpr.areeo.ac.ir/article_120909_9c77f87df7cbcd3c8dd669510cb27acb.pdf} } @article { author = {Yousefi, Hossein and Afra, Elyas and Rasouli, Davood and mashkour, mahdi}, title = {Characterization of water-repellent cellulose paper and nanopaper using silane}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {35}, number = {1}, pages = {22-32}, year = {2020}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2020.127196.1563}, abstract = {In this study, paper and nanopaper were first produced and then treated with dodecyltriethoxysilane to prepare water repellent cellulose paper and nanopaper were made using dodecyltriethoxysilane. As the result of silane treatment, the hydrophilic surface of paper and nanopaper converted to hydrophobic surfaceones. The micrographs of FE-SEM confirmed the nano-scale size of cellulose nanofibers. XPS results showed that the surface of specimens contains silane. With the treatment of silane, the water droplet contact angle increased to 104 and 153 degree in nanopaper and 153 paper, respectivelydegree in paper. Because of this, the surface of treated paper can be regarded as super hydrophobic surface. TGA confirmed that the ash content of treated specimens were higher than those of untreated ones and also it was revealed that the silane treatment made a multi-layers coating on the surface of specimens. The treated specimens showed less water absorption and higher mechanical properties than untreated ones. The silane coupling treatment made water hydrophobic surfaces onof cellulose paper and nanopaper made them water-proof which can led to the development of their applications for outdoorshumid conditions.}, keywords = {PAPER,nanopaper,Silane,hydrophobic surfaces}, title_fa = {بررسی خواص کاغذ و نانوکاغذ آبگریز با استفاده از سیلان}, abstract_fa = {در این مطالعه، ابتدا کاغذ و نانوکاغذ سلولزی تولید شده و سپس با استفاده از روش غوطه‌وری در"دودسیل تری اتوکسی سیلان" ضدآب شدند. در نتیجه تیمار سیلان، سطح آبدوست میکرو کاغذ و نانوکاغذ به سطح آب‌گریز تبدیل شد. آزمون عکس-برداریتصاویر FE-SEM نشان داد که نانوفیبرهای سلولزی در مقیاس نانومتری (زیر 100 نانومتر) نانوفیبرهای سلولزی را تایید کردقرار دارند. آزمون XPS نشان داد که سطح نمونه‌های تیمار شده حاوی سیلان است. با تیمار سیلان زاویه قطره آب به 104 درجه در نانوکاغذ و 153 درجه در کاغذ افزایش پیدا کرد لذا سطح سوپرضدآب آبگریز برای کاغذ ایجاد گردید. آزمون TGA ثابت کرد که میزان خاکستر نمونه‌های حاوی سیلان بیشتر از نمونه‌های بدون سیلان بوده و نیز تأیید شد که تیمار سیلان بر روی سطح به‌صورت چند لایه‌ای اتصال برقرار کرد. نمونه‌های تیمار شده با سیلان جذب آب کمتر و مقاومت مکانیکی بیشتری نسبت به نمونه‌های تیمار نشده نشان دادند. تیمار سیلان میکرو کاغذ و نانوکاغذ سبب ضدآب آبگریز شدن آن‌ها شده و می‌تواند سبب توسعه کاربردهای آن‌ها در فضاهای بیرونی (محیط‌های مرطوب) گردد.}, keywords_fa = {کاغذ,نانوکاغذ,سیلان,سطح آب‌گریز}, url = {https://ijwpr.areeo.ac.ir/article_121036.html}, eprint = {https://ijwpr.areeo.ac.ir/article_121036_819c471872bb257be77c840e986360a3.pdf} } @article { author = {Mollahassani, Amir and Hemmasi, Amir Hooman and Khademi Eslam, Habibollah and Lashgari, Amir and baziyar, behzad}, title = {Dynamic and static comparison of Dovetail , Tongue and Groove in Firs}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {35}, number = {1}, pages = {33-45}, year = {2020}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2020.127777.1571}, abstract = {The aim of this study is to evaluate the dynamic and static of elastic properties of Fir wood joints. For this purpose conventional joints in woos industry including dovetail, tongue and groove beech wood (Abies alba.) joints with polyvinyl acetate (PVA) and cyanoacrylate (CA) adhesives were used. Dimensions of research samples were determined 24×50×360 (mm) according to international standard (ISO No.3129), and the results indicate that the effects of joint type, adhesive type, joint size, and also retrospective joint size became meaningful at 5% level in dynamic and static tests. As the length of groove and height of dovetail and length of dowel increased in the joints, dynamic and static elasticity modules increased, and in terms of changes in elasticity modules of the research. Elasticity module for dovetail joint, as a result of the shape, having a homogenous joint texture, and also lack of extended adhesive line in the joint, is closer to un jointed samples (control group). Also cyanoacrylate adhesive improved elasticity features of samples compared to polyvinyl acetate adhesive as a result of higher tension resistance and faster coagulation. The results of the Student's t-test indicate that there exists a not significant difference between the mean of dynamic and the mean of static modulus of elasticity, not significance at 5% level and The Pearson correlation test indicate that the dynamic and static modulus of elasticity of the samples are significant at 5% level and are of positive correlation(+.0958) .With regard to the correlation of the results of dynamic and static tests, methods for non-destructive dynamic investigation may be regarded as appropriate alternatives to destructive static tests, in order to assess and classify woods.}, keywords = {Dovetail joint,tongue and groove joint,static assessment,dynamic assessment,elasticity modulus}, title_fa = {مقایسه دینامیکی و استاتیکی اتصال دم چلچله و فاق و زبانه در گونه نراد}, abstract_fa = {این پژوهش با هدف ارزیابی دینامیکی و استاتیکی خواص الاستیکی اتصالات ایجاد شده درچوب نراد با استفاده از اتصالات متداول در صنایع چوب از جمله اتصال دم چلچله و فاق وزبانه در گونه نراد Abies alba) ) با استفاده از دو نوع چسب پلی ونیل استات (PVA) و سیانواکریلات(CA) صورت پذیرفت . ابعاد نمونه های تحقیق بر طبق استاندارد بین المللی ISO شماره 3129 ، 24*50*360 میلی متر مورد استفاده قرار گرفت و نتایج حاصله حاکی از آنست که ،اثر نوع اتصال ، نوع چسب ، اندازه اتصال و همچنین اثر متقابل اندازه و نوع اتصال در آزمون دینامیکی و استاتیکی در سطح پنج درصد معنی دار گشتند. با افزایش طول زبانه اتصال و ارتفاع دم چلچله مدول الاستیسیته دینامیکی و استاتیکی افزایش یافت مدول الاستیسیته اتصال دم چلچله به دلیل شکل اتصال دهنده و همگن بودن بافت اتصال دهنده و همچنین عدم وجود خط چسب گسترده در این اتصال ، به مدول الاستیسیته نمونه های اتصال نیافته (شاهد) نزدیک تر می باشد و همچنین چسب سیانواکریلات به دلیل تحمل تنش بالاتر و همچنین گیرایی سریعتر این چسب سبب بهبود خواص الاستیکی نمونه ها نسبت به چسب پلی ونیل استات گردید. با توجه به نتایج آزمون تی استیودنت و آزمون همبستگی پیرسون، مدول الاستیسیته دینامیک و استاتیک برآورد شده در تحقیق دارای رابطه معنی دار در سطح پنج درصد و دارای همبستگی مثبت برآورد گردید با توجه به همبستگی نتایج آزمون استاتیکی و دینامیکی ، روش های بررسی غیرمخرب دینامیکی را می توان جایگزین مناسبی برای آزمون های مخرب استاتیکی، جهت ارزیابی و درجه بندی چوب آلات دانست .}, keywords_fa = {اتصال دم چلچله,اتصال فاق و زبانه,ارزیابی استاتیکی,ارزیابی دینامیکی,مدول الاستیسیته}, url = {https://ijwpr.areeo.ac.ir/article_121037.html}, eprint = {https://ijwpr.areeo.ac.ir/article_121037_e28dadd17b13ba57b8ae0b82809b1098.pdf} } @article { author = {izadyar, soheila and Hamzezadeh, Roghayeh and Efhamisisi, Davood}, title = {Fire resistance and mechanical properties of nano-wollastonite/styrene-treated poplar wood}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {35}, number = {1}, pages = {46-60}, year = {2020}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2020.341487.1596}, abstract = {The aim of this study was to investigate the effect of poplar wood saturation with nano-wollastonite and nano-wollastonite-styrene mixture on fire resistance and mechanical properties of polymer wood. Populus deltoids with 4% nano-wollastonite and 75% methanolic solution of styrene monomer was saturated by vacuum-pressure method. Four different wood treatments with nano-wollastonite, styrene, simultaneous nano-wollastonite and styrene (one-step) by 1:1 ratio and finally, the initial wood saturation by nano-wollastonite and then styrene (two-stage treatment) were investigated. In this study, the fire resistance and mechanical properties of the specimens were investigated. The results showed that the weight loss of wood against fire in two-stage treatment (NW+St) was 61.38% and in one-stage treatment (NW/St) was 69.68% better than control. NW/St treatment flame durability was approximately equal to NW treatment and improved by 30% compared to control. The reduction of carbonized area in two-stage (NW+St) and one-stage (NW/St) treatments was 28.53% and 29.06%, respectively, which showed a significant decrease. The results of mechanical tests showed that the NW/St treatment had the highest value due to the presence of condensing material in parallel to the NW/St treatment which showed an increase of 57.41% compared to the control sample. The modulus of elasticity and disruption of NW/St treatment increased by 26.77% and 35.71%, respectively. In addition, resistance to hardness of NW/St treatment increased by 10.07% compared to control. Overall, it can be concluded that mixing nano-wollastonite with styrene, while increasing the polymer wood fire resistance, also improved the mechanical properties of the polymer wood.}, keywords = {Nano wollastonite,wood-polymer,fire resistance,Poplar,MECHANICAL PROPERTIES}, title_fa = {بررسی مقاومت به آتش و خواص مکانیکی چوب پلیمر صنوبر تیمار شده با نانو ولاستونیت/استایرن}, abstract_fa = {هدف از این پژوهش، اثر اشباع چوب صنوبر با نانو ولاستونیت و مخلوط نانو ولاستونیت و استایرن بر مقاومت به آتش و خواص مکانیکی چوب پلیمر ساخته شده می‌باشد. نمونه‌های چوب صنوبر(Populus deltoides) با نانو‌ ولاستونیت با غلظت 4 درصد و مونومر استایرن محول در متانول با غلظت 75 درصد، با روش خلاء- فشار اشباع شدند. چهار تیمار مختلف چوب با نانو ولاستونیت، استایرن، اشباع مخلوط نانو ولاستونیت و استایرن (تیمار یک مرحله‌ای) به نسبت یک به یک و در نهایت، اشباع اولیه چوب به وسیله نانو ولاستونیت و سپس استایرن (تیمار دو مرحله‌ای) مورد بررسی قرار گرفت. در این تحقیق، خواص مقاومت به آتش و خواص مکانیکی نمونه‌ها بررسی شد. نتایج به دست آمده نشان داد که کاهش وزن چوب در برابر آتش در تیمار دو مرحله‌ای (NW+St)، 38/61 درصد و در تیمار یک مرحله‌ای (NW/St)، 68/69 درصد نسبت به نمونه شاهد بهبود یافت. دوام شعله تیمار NW/St نیز تقریباً با تیمار NW برابر می‌باشد و 30 درصد نسبت به نمونه شاهد بهبود نشان داد. کاهش سطح کربونیزه شده درتیمارهای دو مرحله‌ای (NW+St) و یک مرحله‌ای (NW/St) به ترتیب برابر 53/28 و 06/29 درصد بود که کاهش قابل توجه‌ای را نشان داد. نتایج آزمون‌های مکانیکی نشان داد که در اثر حضور ماده کندسوز کننده مقاومت به فشار موازی الیاف در تیمار NW/St بیشترین مقدار را در بین سایر تیمارها داشت که افزایشی برابر 41/57 درصد را نسبت به نمونه شاهد نشان داد. مدول الاستیسیته و گسیختگی تیمار NW/St به ترتیب 77/26 و 71/35 درصد نسبت به نمونه شاهد افزایش داشتند. به علاوه، مقاومت به سختی تیمار NW/St 09/107 درصد نسبت به نمونه شاهد افزایش نشان داد. در مجموع می‌توان نتیجه‌گیری کرد که مخلوط کردن نانو ولاستونیت با استایرن در عین حال که مقاومت چوب پلیمر را در برابر آتش افزایش داد، باعث بهبود خواص مکانیکی چوب پلیمر هم شد.}, keywords_fa = {نانو ولاستونیت,چوب پلیمر,مقاومت به آتش,صنوبر,خواص مکانیکی}, url = {https://ijwpr.areeo.ac.ir/article_121141.html}, eprint = {https://ijwpr.areeo.ac.ir/article_121141_da8cfb7ae05ed13c68594c490722a335.pdf} } @article { author = {Vaysi, Ramin and Yousefi-golordi, Yousef}, title = {Effect of Nano-fibrillated Cellulose and Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp(CMP)}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {35}, number = {1}, pages = {61-75}, year = {2020}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2020.128617.1584}, abstract = {This study was aimed to investigate the effect of cellulose nano-fibers and ‎chitosan on optical and mechanical properties of chemi-mechanical pulp. For this purpose, some of the bleached CMP pulp of Mazandaran Wood and Paper Industries (MWPI) were randomly selected as a control sample. In addition, the cellulose nanofibers were used as a white gel at 3 levels of ‎0, 2, and 3%. The chitosan was then added to the CMP pulps suspensions at 5 levels of 0, ‎‎0.5, 1, 1.5, 2%, as well. Hand-sheets with a basis weight of 60 gr/m2 were prepared from the mentioned pulps. The optical and mechanical properties were then measured and compared using TAPPI standard test methods. The results showed that by adding chitosan, tear, tensile, burst and breaking length strengths, air resistance, ‎yellowness, and greenness ‎increased and brightness, Cobb 60 and a* factor ‎decreased. On the other hand, with the addition of chitosan and nano-‎cellulose to CMP pulp, the tensile, burst, breaking length strengths, air resistance, Cobb 60, yellowness and a* factor ‎increased and the tear, brightness, and opacity decreased. Moreover, the findings showed that by simultaneous adding 2% chitosan, 2% chitosan, and 3% cellulose nanofibers to the CMP pulp, most of the paper properties were improved. Therefore, ‎it can also be introduced as the best treatment.}, keywords = {chitosan,Nano cellulose,CMP pulp,Optical and mechanical properties}, title_fa = {تاثیر سامانه بیوپلیمری کیتوزان و نانوالیاف سلولزی بر ویژگی‌های نوری و مقاومتی خمیرکاغذ شیمیایی- مکانیکی(CMP )}, abstract_fa = {این تحقیق با هدف تاثیر استفاده از کیتوزان و نانوسلولز بر ویژگی های مقاومتی خمیرکاغذ شیمیایی- مکانیکی(CMP) انجام شد. به همین منظور، ابتدا مقداری ازخمیرشیمیایی-مکانیکی(CMP) رنگبری شده کارخانه چوب و کاغذ مازندران به عنوان نمونه شاهد انتخاب شد. سپس نانو الیاف سلولزی به صورت ژل سفید رنگ و در 3 سطح 0 ،2 و 3 درصد استفاده گردید. همچنین کیتوزان در 5 سطح 0، 5/0، 1، 5/1و2 درصد به سوسپانسیون خمیر کاغذ CMP حاصل اضافه شد. از خمیرکاغذ‌های مذکور کاغذهایی با وزن پایه gr/m2 60 تهیه و خواص نوری و مقاومتی آن ها طبق آزمون های استاندارد TAPPI اندازه گیری و مقایسه گردید. نتایج نشان داد که با افزودن کیتوزان مقاومت های به پارگی، کششی، ترکیدن، طول پارگی، مقاومت به عبور هوا،زردی و سبز رنگی در کاغذ حاصل از خمیرکاغذ CMP افزایش و روشنی، جذب آب و فاکتورa* کاهش یافته است. با افزودن نانو سلولز و کیتوزان به خمیرکاغذ CMP مقاومت های کششی، ترکیدن، طول پارگی و مقاومت به عبور هوا، جذب آب، زردی و فاکتورa* افزایش و مقاومت به پارگی، روشنی، سبز رنگی، ماتی کاهش یافته است. نتایج نشان داد که افزودن 2 درصد کیتوزان و همچنین افزودن همزمان2 درصد کیتوزان و 3 درصد نانو سلولز به خمیرکاغذ CMP باعث بهبود اکثر ویژگی ها درکاغذ حاصل شده است و می تواند به عنوان تیمار برتر انتخاب و معرفی گردد.}, keywords_fa = {کیتوزان,نانوسلولز,خمیرکاغذ CMP,ویژگی های نوری و مقاومتی}, url = {https://ijwpr.areeo.ac.ir/article_121142.html}, eprint = {https://ijwpr.areeo.ac.ir/article_121142_6595e6ee4aa6d32a4fa19af2b5b34515.pdf} } @article { author = {Fatehi, Ehsan and Rahmaninia, Mehdi and Khosravani, Amir and Iron, Zeynab}, title = {Raw and Oxidized Starch Performance as Reinforcing Additives of Internal Bond in Recycled Multilayer Paperboards}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {35}, number = {1}, pages = {76-87}, year = {2020}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2020.341239.1591}, abstract = {In production of paperboards especially the ones with high grammage, limitation of pulp drainage will drastically reduce the speed of papermaking process. In this manner, one of the common ways to improving the drainage and subsequent increasing of machine speed is producing the multilayer paperboards. Although sometimes these layers are connected to each other without applying any additives, but most of the time starch has been applied between the layers for improving the internal bonds of multilayer paperboards. In this study, the effect of spraying two kinds of starch commonly used in industry (native and oxidized starch) with different application dosages (0, 0.5, 1, 1.5 and 2 g/m2) was investigated. The top layer of double layered paperboard was made of recycled printing and writing pulp and the back layer was produced from old corrugated carton (OCC) recycled fibers. Grammage of each layer was set about 100 g/m2. The results showed that spraying native and oxidized starch improved all considered mechanical properties comparing the control sample (without spraying any additive). Also, the native starch indicated better results in comparison with oxidized starch. Moreover, in both native and oxidized starch, the best mechanical properties were observed with applying 1.5 g/m2 of mentioned additives.}, keywords = {Multilayer Paperboard,internal bond,Native Starch,Oxidized Starch,spraying}, title_fa = {عملکرد نشاسته خام و اکسید شده به عنوان افزودنی های تقویت کننده پیوند بین لایه ای در مقواهای چندلایه بازیافتی}, abstract_fa = {در تولید مقوا به ویژه انواع با گراماژ بالا، محدودیت آبگیری از خمیرکاغذ ، سرعت تولید کاغذ را به شدت پایین می‌آورد. در این حالت، یکی از راه‌کارهای متداول در بهبود آبگیری و افزایش سرعت ماشین کاغذ، تولید مقوای چندلایه می‌باشد. هرچند بعضی مواقع این لایه‌ها بدون اتصال دهنده روی یکدیگر قرار می‌گیرند، اما در اکثر مواقع برای تقویت استحکام پیوند بین لایه‌ای از نشاسته به عنوان افزودنی بین لایه‌ها استفاده می‌شود. در این تحقیق اثر پاشش دو نوع نشاسته متداول در صنعت (اکسید شده و خام) را در میزان پاشش‌های مختلف (صفر، 1، 5/1 و 2 گرم بر مترمربع) در بین دو لایه مقوا بررسی شد. لایه رویی مقوا از کاغذ حاصل از الیاف بازیافتی خمیرکاغذ چاپ وتحریر و لایه زیرین از کاغذ حاصل از الیاف بازیافتی خمیرکاغذ کارتن کنگره‌ای کهنه تشکیل شدند. گراماژ هر لایه حدود 100 گرم بر مترمربع در نظر گرفته شد. نتایج نشان داد که اسپری هر دو نوع نشاسته در بین دو لایه باعث افزایش قابل توجه ویژگی‌های مقاومتی اندازه‌گیری شده، نسبت به تیمار شاهد گردیدند. در مقایسه بین دو نوع نشاسته، نشاسته خام کارایی بهتری از نشاسته اکسید شده داشت. بیشترین تاثیر هر دو نوع نشاسته در ویژگی‌های اندازه‌گیری شده در سطح 5/1 گرم بر متر مربع اتفاق افتاد.}, keywords_fa = {مقوای چندلایه,پیوند بین لایه ای,نشاسته خام,نشاسته اکسید شده,اسپری کردن}, url = {https://ijwpr.areeo.ac.ir/article_121143.html}, eprint = {https://ijwpr.areeo.ac.ir/article_121143_726174fd8ce97635a23e00391b7d1938.pdf} } @article { author = {Firouzbehi, Farhod and Efhamisisi, Davood and Hamzeh, Yahya and tarmian, asghar and Oladi, Reza}, title = {Treatability of Beech and Pine Wood with Pyrolysis Acid Made from Different ‎species of Wood}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {35}, number = {1}, pages = {88-101}, year = {2020}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2020.341610.1599}, abstract = {Pyrolysis acid or wood vinegar is a dark liquid derived from the condensation of steam and ‎smoke emitted by thermal pyrolysis of wood or any other lignocellulosic material. In this study, ‎a heating furnace was first designed to allow a precise temperature-time program. The wood ‎from three different species including oak, citrus and cypress were pyrolyzed under a specific ‎temperature-time schedule. The smoke emitted from the furnace were cooled and condensed in ‎a 20 m pipe using the flow of cold water, and then was dumped in a container as liquid. ‎Pyrolysis was performed at three different temperature ranges of 200, 260 and 330 ° C. The ‎obtained pyrolysis acids had different color and acidity depending on the temperature and ‎species of wood used. Under the heating conditions used in this study, cypress had lower ‎pyrolysis rate than hardwoods. The weight percentage gain of the treated beech and pine wood ‎varied from 5 to 35%, which was depended to the wood species for treatment, the temperature ‎as well as the wood used for pyrolysis. Acid pyrolysis at higher temperatures resulted in higher ‎weight percentage gain. The acid pyrolysis obtained at lower temperature was leached at ‎higher rates from treated wood. Also the wood types used for pyrolysis had significant effect on ‎the amount of lechant from treated woods. ‎}, keywords = {Acid pyrolysis,treatability,weight percentage gain,Leaching,Temperature.‎}, title_fa = {اشباع پذیری چوب راش و کاج با اسید پیرولیز تهیه شده از گونه‌های مختلف چوب}, abstract_fa = {اسید پیرولیز یا سرکه چوب مایعی تیره رنگ است که از تراکم بخار و دود ساطع شده از پیرولیز حرارتی چوب یا هر ماده ‏لیگنوسلولزی دیگر بدست می‌آید. در این تحقیق ابتدا یک کوره حرارت‌دهی ساخته شد تا با استفاده از آن امکان اعمال یک ‏برنامه دمائی-زمانی دقیق وجود داشته باشد. سپس چوب سه گونه مختلف شامل بلوط، پرتقال و سرو تحت یک برنامه ‏دمایی-زمانی مشخص تحت پیرولیز قرار گرفتند. بخار و دودهای ساطع شده از کوره داخل لوله‌ای به طول 20 متر با استفاده ‏از جریان آب سرد خنک و متراکم شده و سپس به صورت مایع در داخل یک ظرف جمع‌آوری شدند. عمل پیرولیز در سه ‏محدوده دمائی مختلف شامل 200، 260 و 330 درجه سانتی‌گراد انجام شد. اسید پیرولیزهای بدست‌ آمده دارای رنگ و ‏اسیدیته متفاوتی با توجه به دمای سرکه‌گیری بودند. گونه‌های مختلف چوب مورد استفاده برای سرکه‌گیری نیز بر روی این ‏صفات اثرگذار بود. طی شرایط حرارت‌دهی استفاده شده در این مطالعه گونه سرو نسبت به گونه‌های پهن‌برگ درصد پیرولیز ‏کمتری داشت. مقادیر افزایش وزن نمونه‌های چوبی تیمار شده با توجه به گونه‌ی‌ چوب مورد اشباع، دمای تهیه اسید پیرولیز و ‏همچنین چوب مورد استفاده برای پیرولیز از 5 تا 35 درصد متغییر بود. اسید پیرولیز‌های بدست آمده در دمای بالاتر منجر به ‏درصد افزایش وزن بالاتری شدند. اسید پیرولیز‌های بدست آمده در دمای پایین‌تر با نرخ بیشتری از چوب‌های تیمار شده ‏آبشویی شدند. همچنین گونه چوب مورد استفاده برای پیرولیز نیز اثر معنی‌داری بر روی میزان آبشویی مواد از چوب داشت.‏}, keywords_fa = {اسید پیرولیز,اشباع‌پذیری,درصد افزایش وزن,آبشویی,دما. ‏}, url = {https://ijwpr.areeo.ac.ir/article_121257.html}, eprint = {https://ijwpr.areeo.ac.ir/article_121257_e2031c568efbabd60a614c424530e604.pdf} } @article { author = {Mehranfar, Amir Hossein and Khosravani, Amir and Rahmaninia, Mehdi}, title = {The effect of electerical conductivity on the performance and interaction of cationic starch- anionic nanosilica in pulp slurry}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {35}, number = {1}, pages = {102-112}, year = {2020}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2020.341345.1593}, abstract = {As the papermaking fibers contain negative charge, therefore some polymer additives used in the pulp slurry, possess counter-ions (cationic polyeletrolyte). Meanwhile, due to increase of electrical conductivity (EC) in the suspension, the performance of many polyelectrolytes encounter some problems. Hence, according to the efforts for the water system closure, less raw water consumption, and therefore higher EC of the pulp suspension, how the performance of polyelectrolyte-based additives such as cationic starch-anionic nanosilica is adversely affected. In this due, the effectiveness of EC on the performance of the mentioned additive combination was investigated. The results confirmed that the EC negatively affected the performance of the wet-end additive system; although the amount of effectiveness was dependent on the type of the pulp property. Such that for low polyelectrolyte dosage and high EC, in certain properties, the positive effect of this additive system was not significant anymore. But, in the case of some other properties such as internal bond and freeness, despite of the negative effects of high EC, the performance of cationic starch-anionic nanosilica system was significantly remarkable.}, keywords = {Electerical Conductivity,polyelectrolyte,Starch-Nanosilica,Colloid}, title_fa = {اثر هدایت الکتریکی بر کارایی و برهمکنش نشاسته کاتیونی – نانوسیلیکای آنیونی در خمیرکاغذ}, abstract_fa = {با توجه به اینکه الیاف سلولزی در کاغذسازی حاوی بار منفی هستند، بنابراین برخی مواد افزودنی پلیمری که در داخل خمیرکاغذ به‌کار می‌روند، حامل یون‌های دارای بار مخالف (پلی الکترولیت کاتیونی) می‌باشند. این در حالی است که با افزایش هدایت الکتریکی سوسپانسیون، کارایی بسیاری از پلی‌الکترولیت‌ها با مشکل مواجه می‌شود. لذا با توجه به تلاش صنایع به بستن سیستم آب و مصرف آب تازه کمتر و در نتیجه افزایش هدایت الکتریکی خمیرکاغذ، لازم به بررسی است که عملکرد مواد افزودنی کارآمد برپایه پلی الکترولیت‌ها نظیر نشاسته کاتیونی - نانوسیلیکای آنیونی تا چه حد تحت تاثیر منفی قرار می‌گیرد. به همین دلیل میزان تاثیرپذیری عملکرد ترکیب افزودنی مذکور از هدایت الکتریکی خمیرکاغذ مورد بررسی قرار گرفت. نتایج نشان داد هدایت الکتریکی تاثیر منفی بر کارایی این سیستم ماده افزودنی پایانه تر داشته است؛ اما میزان تاثیرگذاری آن به ویژگی مورد بررسی مرتبط بوده ‌است. چنانکه در برخی ویژگی‌ها در مقدار کم پلی‌الکترولیت و هدایت الکتریکی زیاد، کارایی مثبت این سیستم ماده افزودنی دیگر معنی‌دار نبود . اما در برخی دیگر از ویژگی‌های خمیرکاغذ، نظیر پیوند درونی و درجه روانی، علیرغم اثرات منفی هدایت الکتریکی زیاد، همچنان کارایی مثبت نشاسته– نانوسیلیکا بصورت معنی‌داری مشهود بود.}, keywords_fa = {هدایت الکتریکی,پلی الکترولیت,نشاسته-نانوسیلیکا,کلویید}, url = {https://ijwpr.areeo.ac.ir/article_121258.html}, eprint = {https://ijwpr.areeo.ac.ir/article_121258_4b240a171ee6aee55d3c9d7a4bd7b49b.pdf} } @article { author = {Golbabaei, Fardad and Hajihassani, Reza and Salehi, Kamyar and Tabei, Asghar}, title = {Investigation of composite of three layers of cement and ionolite}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {35}, number = {1}, pages = {113-125}, year = {2020}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2020.126127.1540}, abstract = {The aim of this study was to construct lightweight structures and reduce energy loss. The aim of this study was to produce cement wood or composite products by combining organic particles such as wood fibers and lignocellulosic materials with monolith. The investigated product consisted of cement wood made from scrap wood fibers and poplar wood particle thickness of 20 mm on both sides of the structure and 10 mm thick unolith in the middle of the structure. Products manufactured by Unolite Cement will have a combination of cement and Unolite properties. In this study, according to the studied variables including lignocellulosic materials and amount of additive (such as calcium chloride (Cacl) at two levels of 3 and 5%, the best specimens were prepared using 10% lignocellulosic materials. The thickness of the specimens was uniform at the two monolithic surfaces and all fabrication conditions such as discharge rate, press pressure, coalescence rate were assumed to be uniform and constant.In static bending experiment the mean maximum load force for ordinary brick failure was 3933.26N and the mean. The maximum load for breaking the cement stick was 389/78 N, which was approximately It has 10% resistance to ordinary brick but ordinary brick breaks abruptly when fractured, while the monolithic brick is gradually broken and the insulation properties due to the cellulosic fibers and the monolith in it are higher than the ordinary brick due to its low resistance to use. Recommended in partitions.}, keywords = {Unolith Cement Wood,Flexural strength,Portland cement,calcium chloride}, title_fa = {بررسی ساخت کامپوزیت سبک سه لایه از چوب سیمان و یونولیت}, abstract_fa = {این مطالعه با هدف ساخت سازه سبک و کاهش اتلاف انرژی انجام گردیده است بدین منظور تولید محصولات چوب سیمان یا فرآورده‌های کامپوزیت با ترکیب ذرات آلی مانند الیاف چوب و مواد لیگنوسلولزی با یونولیت مد نظر قرار گرفت. محصول مورد بررسی شامل چوب سیمان ساخته شده از الیاف روزنامه باطله و خرده چوب صنوبر با ضخامت 20 میلی‌متر در دو طرف سازه و یونولیت با ضخامت 10 میلیمتر در وسط سازه تولید گردید. فرآورده‌های تولیدی چوب سیمان یونولیت دارای خواص ترکیبی از چوب سیمان و یونولیت خواهد داشت. در این تحقیق با توجه به فاکتورهای متغیر مورد مطالعه که شامل مواد لیگنوسلولزی و مقدار ماده افزودنی (همانند کلرید کلسیم (Caclدر دو سطح 3 و 5 درصد بوده، نمونه‌های آزمونی تهیه شدند. بهترین شرایط مقاومتی ساخت سازه استفاده از 10% مواد لیگنوسلولزی بدست آمد. ضخامت نمونه‌ها در دو سطح یونولیت یکسان بوده و کلیه شرایط ساخت مانند میزان آبدهی، فشار پرس، میزان هم‌زدگی بطور یکسان و ثابت در نظر گرفته شد. در آزمایش خمش استاتیک میانگین نیروی حداکثر بار برای شکست آجر معمولی برابر 26/3933 نیوتن و میانگین بار حداکثر برای شکستن چوب سیمان یونولیت 78/389 نیوتن بدست آمد که در حدود 10% مقاومت آجر معمولی را دارد اما آجر معمولی در هنگام شکست بصورت ناگهانی می شکند در حالیکه آجر یونولیت بصورت تدریجی شکسته می‌شود و خواص عایق بودن بدلیل دارا بودن الیاف سلولزی و یونولیت در آن از آجر معمولی بیشتر است با توجه به مقاومت پایین برای استفاده در قسمت‌های پارتیشن بندی پیشنهاد می‌گردد.}, keywords_fa = {چوب سیمان یونولیت,مقاومت خمشی,سیمان پرتلند,کلریدکلسیم}, url = {https://ijwpr.areeo.ac.ir/article_121259.html}, eprint = {https://ijwpr.areeo.ac.ir/article_121259_32130ed5202fe387b225ba3f72c3bec7.pdf} }