@article { author = {Hajihassani, Reza and Golbabaei, Fardad and masoomeh, seyedeh}, title = {Influence of filler modification on physical and mechanical properties of wood plastic composite}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {34}, number = {4}, pages = {435-447}, year = {2020}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2019.126382.1544}, abstract = {The aim of current research was to investigate effect of chemical treatment of poplar fibers on physical and mechanical properties of wood plastic composite. The samples were made from acetylated poplar fibers with different weight percent gains (WPGs of 0, 14.7 and 19.5%), two levels of fiber consumption (30 and 40%) as well as two levels of MAPP (0 and 3%). The samples were physically and mechanically tested. Afterward, the results were analyzed based on a complete randomized design (CRD) under a factorial experiment. Results revealed that the acetylation causes reduction of water absorption and thickness swelling and also improvement of some mechanical properties. Moreover, the results showed that the utilization of MAPP increases physical and mechanical properties of wood plastic composite. The research results showed that increasing of fiber consumption from 30 to 40% enhances water absorption, thickness swelling, tensile strength, tensile modulus as well as bending modulus, and also causes reduction of bending strength and impact resistance.}, keywords = {Wood Plastic Composite,Filler Modification,poly propylene,PHYSICAL AND MECHANICAL PROPERTIES}, title_fa = {تاثیر اصلاح شیمیایی پرکننده بر خواص فیزیکی و مکانیکی چندسازه چوب-پلاستیک}, abstract_fa = {Dor:98.1000/1735-0913.1398.34.435.69.4.1578.1603 هدف از این تحقیق بررسی تاثیر تیمار شیمیایی الیاف صنوبر (Populous deltoides) بر خواص فیزیکی و مکانیکی چندسازه چوب- پلاستیک تولید شده به روش تزریق قالبی بود. نمونه‌های چوب- پلاستیک با استفاده از پلی‌پروپیلن و با در نظر گرفتن 3 سطح مختلف شدت استیلاسیون (صفر، 7/14 و 5/19 درصد)، 2 سطح مقدار الیاف (30 و 40 درصد) و دو سطح کاربرد مالئیک انیدرید پروپیلنی (MAPP) بعنوان جفت کننده (صفر و 3 درصد) ساخته شدند و آزمون‌های فیزیکی و مکانیکی بر روی آنها صورت گرفت. سپس نتایج در قالب طرح آماری کاملاً تصادفی متعادل تحت آزمایش فاکتوریل مورد تجزیه و تحلیل قرار گرفتند. نتایج آزمون‌ها نشان دادند که تیمار شیمیایی استیلاسیون می‌تواند سبب کاهش میزان جذب آب بلند مدت و واکشیدگی ضخامت بلند مدت چندسازه گردد. بعلاوه این تیمار سبب بهبود برخی از خواص مکانیکی چندسازه چوب پلاستیک گردید. همچنین در این بررسی نتایج بیانگر آن بود که مصرف مالئیک انیدریر پروپیلنی‌ می‌تواند بر روی کلیه خواص فیزیکی و مکانیکی چند سازه اثر مثبت داشته باشد. افزایش مصرف الیاف در ساخت چندسازه سبب افزایش میزان جذب آب، واکشیدگی ضخامتی و نیز بهبود برخی ویژگی‌های مکانیکی از جمله مقاومت کششی، مدول کششی و مدول خمشی گردید. همچنین با افزایش مصرف الیاف ویژگی‌های مقاومت خمشی و مقاومت به ضربه چندسازه چوب- پلاستیک کاهش یافت.}, keywords_fa = {چندسازه چوب-پلاستیک,اصلاح پرکننده,پلی پروپیلن,ویژگیهای فیزیکی و مکانیکی}, url = {https://ijwpr.areeo.ac.ir/article_119792.html}, eprint = {https://ijwpr.areeo.ac.ir/article_119792_907969dda8dfad34f069438ad53d7563.pdf} }