@article { author = {Golbabaei, Fardad and Salehi, Kamyar and Hajihassani, Reza}, title = {The use of bagasse in the manufacture of reinforced composite reinforced cement-fiber}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {34}, number = {2}, pages = {302-311}, year = {2019}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2019.127186.1567}, abstract = {In this study, the composition of bagasse composite was investigated using different amounts of bagasse particles. Bagasse and cement particles are manufactured at levels (5, 10 and 15%) and percentage of calcium chloride as cement accelerating additive at two levels (3 and 2%) based on cement dry weight. Then, the mixture was poured into a mold measuring 15 8 18 8 8 cm and the excess water was removed from the bottom of the mold and initially weighed 10 kg on the specimens. The specimens were removed from the mold after 48 hours and kept in a glass saturated room at 90% humidity for 14 days and then finally dried in a laboratory environment. The bending strength and physical properties tests were performed on the specimens. The results showed that bagasse particles had a significant effect on bending strength and other physical properties. The bending strength was highest in boards made with 10% bagasse particles.}, keywords = {Composite Bagasse Cement Composite Product,Bending strength,physical properties,Portland cement,calcium chloride}, title_fa = {استفاده از باگاس در ساخت کامپوزیت تقویت شده سیمان چوب- الیاف}, abstract_fa = {در این پژوهش فرآورده چندسازه باگاس سیمان با استفاده از مقادیر مختلف ذرات باگاس مورد بررسی قرار گرفت. ذرات باگاس و سیمان در سطوح (5، 10 و 15 درصد) و درصد میزان کلرید کلسیم به‌عنوان ماده افزودنی تسریع‌کننده‌گیرایی سیمان در دو سطح (3 و ٥ درصد) براساس وزن خشک سیمان ساخته می‌شود. سپس مخلوط تهیه شده در یک قالب به ابعاد 8×18×15سانتی‌متر ریخته شده و آب اضافی از انتهای قالب خارج شده و در ابتدا وزنه‌ای به وزن10 کیلوگرم روی نمونه‌ها قرار گرفت. نمونه تخته‌های ساخته شده بعداز 48 ساعت از قالب خارج و به‌مدت 14 روز در اتاق اشباع شیشه‌ای با رطوبت 90% نگهداری شدند و سپس در محیط آزمایشگاه خشک شده به گیرایی نهایی رسیدند. آزمونهای مقاومت به خمش و ویژگی‌های فیزیکی بر روی نمونه‌ها انجام شد. نتایج نشان داد که ذرات باگاس بر روی مقاومت خمشی و سایر ویژگی‌های فیزیکی تاثیرگذار است، مقاومت به خمش در تخته‌های ساخته شده با 10 درصد ذرات باگاس بیشترین مقدار را داشته است.}, keywords_fa = {فرآورده چندسازه ذرات باگاس سیمان,مقاومت خمشی,ویژگی‌های فیزیکی,سیمان پرتلند,کلریدکلسیم}, url = {https://ijwpr.areeo.ac.ir/article_120186.html}, eprint = {https://ijwpr.areeo.ac.ir/article_120186_43673909dcfaf225a3232e44162f256e.pdf} }