@article { author = {Ghahri, Saman and Hajihassani, Reza and Salehi, Kamyar and Golbabaei, Fardad}, title = {Study on Mechanical Properties of Kenaf-Cement Composite}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {37}, number = {2}, pages = {141-149}, year = {2022}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2022.357410.1707}, abstract = {In this study, the mechanical properties of kenaf cement composite were investigated using different amounts of kenaf particles (mixture of kenaf core and bark and kenaf core particles). Kenaf-cement composites were manufactured at different levels (10, 15 and 20%) of different kenaf particles. Also, Portland cement and calcium chloride (as cement accelerating additive) were used in this research. Calcium chloride and water were mixed well and then kenaf particles were added to the mixture. At next stage, cement was added to the prepared mixture and all component were mixed well. Prepared mixture was molded to the wooden mold and kenaf cement composites were produced. The results obtained from mechanical evaluation of kenaf-cement composites showed the highest bending strength in 10% kenaf bark-cement composites. Also results revealed that highest modulus of elasticity of 10% kenaf core-cement products were obtained. The results of this research revealed the potential of kenaf particles as reinforcement in cement composite production.}, keywords = {Cement-based products,Bending strength,Portland cement,lignocellulosic materials}, title_fa = {بررسی ویژگی های مکانیکی چندسازه کنف- سیمان}, abstract_fa = {در این تحقیق به منظور به دست آوردن بهترین درصدهای مورد استفاده در ساخت فرآورده سیمانی، از مغز کنف و مخلوط مغز و پوست کنف با درصدهای (10، 15 و 20) چندسازه چوب سیمان ساخته شد. کلریدکلسیم به عنوان تسریع کننده و سیمان پرتلند تیپ 2 در ساخت چندسازه سیمانی استفاده گردیدند. کلرید کلسیم و آب با هم مخلوط شدند و بعد ذرات کنف (مغز کنف و مخلوط مغز و پوست کنف) با درصدهای مختلف به آن اضافه شدند. در مرحله بعد سیمان به این ترکیب افزوده شد و مواد کاملاً با هم مخلوط و یکنواخت شدند. ترکیب آماده شده داخل قالب‌های چوبی ریخته شد و نمونه‌های کنف-سیمان ساخته شدند. نتایج به دست آماده از ارزیابی مکانیکی فرآورده‌های کنف-سیمان نشان دادند که بیشترین مقاومت خمشی مربوط به نمونه‌های ساخته شده با 10 درصد مخلوط مغز و پوست کنف و بیشترین مدول الاستیسیته نیز مربوط به نمونه‌های ساخته شده با 10 درصد مغز کنف می‌باشند. نتایج این پژوهش، قابلیت استفاده از ذرات کنف در تولید فرآورده های سیمانی را نشان دادند.}, keywords_fa = {فرآورده‌های سیمانی,مقاومت خمشی,سیمان پرتلند,مواد لیگنوسلولزی}, url = {https://ijwpr.areeo.ac.ir/article_126195.html}, eprint = {https://ijwpr.areeo.ac.ir/article_126195_865eb807a81cffd5a894a883d3ca4fae.pdf} }