@article { author = {Marzban Moridani, Elham and Talaeipour, Mohammad and Hemmasi, Amir houman and Ghasemi, esmaeil and Kalagar, Mehdei}, title = {The effect of paper mill recycling sludge application on the mechanical properties of composites based on recycled polymers}, journal = {Iranian Journal of Wood and Paper Science Research}, volume = {28}, number = {3}, pages = {509-521}, year = {2013}, publisher = {Research Institute of Forests and Rangelands}, issn = {1735-0913}, eissn = {2383-112X}, doi = {10.22092/ijwpr.2013.3455}, abstract = {In this research, the mechanical properties of composite produced from recycled polymers (polyethylene and polypropylene) and paper mill sludge from two different sources (waste water sludge (s) and sludge on the DAF) were examined. Three levels of paper sludge (15, 30 and 45 wt %) were used to produce composites. Haake machine was used to blend materials and to produce standard samples, injection molding system was utilized. The mechanical properties including bending (strength and modulus) and impact strength were measured. The results showed that composites containing PP polymer and waste water sludge have higher mechanical properties than PE polymer and sludge on the DAF. The addition of both types of sludge as filler, results in enhancement of tensile properties compare to pure polymer. In the case, the higher content of sludge on the DAF was used, tensile strength of the composite decreased. Adding both types of sludge as filler, impact strength was lower than pure polymer. It was shown that composites containing sludge on the DAF have lower impact property than waste water sludge. }, keywords = {Recycled paper mill sludge,composites,MECHANICAL PROPERTIES}, title_fa = {استفاده از لجن کارخانه بازیافت کاغذ بر خواص مکانیکی چندسازه بر پایه پلیمرهای بازیافتی}, abstract_fa = {در این پژوهش ویژگی­های مکانیکی چندسازه پلیمرهای بازیافتی (پلی­اتیلن و پلی­پروپیلن) و لجن کارخانه بازیافت کاغذ از دو منبع مختلف شامل لجن پساب (S) و لجن رویDAF  (D) به‌عنوان تقویت کننده مورد بررسی قرار گرفت. برای ساخت چندسازه از سه سطح لجن کاغذ ( 15،30 و 45% ) استفاده شد. برای اختلاط مواد از دستگاه هک و برای ساخت نمونه­های استاندارد از قالب­گیری تزریقی استفاده گردید. نتایج بدست‌آمده نشان داد که چندسازه حاوی پلی­پروپیلن و لجن پساب دارای ویژگی­های مکانیکی بالاتری نسبت به چندسازه حاوی پلی­اتیلن و لجن روی DAF می­باشد. با افزایش میزان هر دو نوع لجن کارخانه بازیافت کاغذ به‌عنوان پرکننده ویژگی­های کششی و خمشی نسبت به پلیمر خالص افزایش یافته است. البته فقط با افزایش میزان لجن روی DAF کاهش در مقاومت‌کششی چندسازه مشاهده شد. با افزایش میزان هر دو نوع لجن مقاومت به ضربه در همه چندسازه­های مقاومت به ضربه کاهش یافت. همچنین چندسازه­های حاوی لجن روی  DAFمقاومت به ضربه پایین­تری نسبت به لجن پساب کارخانه نشان دادند. }, keywords_fa = {لجن کارخانه بازیافت کاغذ,چندسازه,ویژگی¬های مکانیکی}, url = {https://ijwpr.areeo.ac.ir/article_3455.html}, eprint = {https://ijwpr.areeo.ac.ir/article_3455_f6c67abfa0ee03ef4ed0bd6189fe1908.pdf} }