ORIGINAL_ARTICLE
بررسی مقایسهایی خواص ضدمیکروبی نانوکامپوزیت سلولز- نقره و فیلم نانوسلولز پوششدهی شده با نانونقره
در سالهای اخیر تولید فیلم و بهکارگیری پوششهای سلولزی زیستتخریبپذیر و دوستدار محیطزیست به ویژه از نانوذرات سلولزی توجهات زیادی را به خود جلب کرده است. متناسب با کاربرد این محصولات در صنایع مختلفی چون صنایع غذایی، دارویی و بستهبندی، اهمیت بهبود ویژگی ضدباکتری این محصولات را پیش از پیش آشکار میسازد. در این تحقیق با هدف تولید پوششهای سلولزی ضدباکتری، ابتدا سلولز نانوفیبریلهشده از خمیر الیاف بلند به شیوه مکانیکی آسیاب کردن تولید شده و سپس به کمک ذرات نانونقره (بهکارگیری نیتراتنقره و احیاء با سدیمبورهیدرید)، با دو روش، تولید فیلم صورت پذیرفت. در روش اول با کمک پلیدادمک، ذرات نانونقره در دو سطح 5 و 10 ppm بر روی NFC احیاء وسپس از نانوکامپوزیت NFC/نانونقره فیلم تولید گردید. در روش دوم ابتدا فیلم NFC تولیدگردیده وسپس به وسیله غوطهوری آن در محلول نانونقره در دو سطح 5 و10 ppm، فیلمهای ضدباکتری به دست آمد. میزان ماندگاری نانونقره در روش اول در غلظتهای بالاتر بیشتر از شیوه غوطهوری بهدست آمد. اما در غلظتهای کمتر( ppm5) اختلاف ماندگاری نانونقره در دو شیوه اندک بوده است. لازم به ذکر است که شیوه غوطهوری مزیت بزرگ عدم هدر رفت نانونقره و ورود آن به طبیعت در طی آبگیری که در شیوه اول متعارف است را ندارد ومحلول نانونقره با افزایش غلظت قابل استفاده مجدد میباشد.
https://ijwpr.areeo.ac.ir/article_106597_e64acf97cdebbf2a6c3e901e23d839a5.pdf
2016-12-21
541
556
10.22092/ijwpr.2016.106597
نانوکامپوزیت
غوطهوری
سلولز نانوفیبریلهشده
نانونقره
ضدمیکروبی
مهدیس
شفاعی
mahdis.shafaee@gmail.com
1
دانش آموختهی دانشگاه علوم کشاورزی و منابع طبیعی گرگان
LEAD_AUTHOR
الیاس
افرا
elyasafra@yahoo.com
2
معاون اموزشی دانشکده چوب و کاغذ دانشگاه منابع طبیعی و علوم کشاورزی گرگان
AUTHOR
علی
قاسمیان
ali.ghasemian1960@yahoo.com
3
عضو هیئت علمی دانشکده چوب و کاغذ دانشگاه علوم کشاورزی و منابع طبیعی گرگان
AUTHOR
محمد رضا
دهقانی فیروزآبادی
m_r_dehghani@mail.ru
4
عضو هیئت علمی دانشکده چوب و کاغذ دانشگاه علوم کشاورزی و منابع طبیعی گرگان
AUTHOR
پونه
ابراهیمی
epouneh@yahoo.com
5
عضو هیئت علمی دانشکده شیمی دانشگاه گلستان
AUTHOR
-Chen, X., and Schluesener, H. J. 2008. Nanosilver: a nanoproduct in medical application. Toxicology letters, 176(1): 1-12.
1
-Cheng, C. L., Sun, D. S., Chu, W. C., Tseng, Y. H., Ho, H. C., Wang, J. B., and Chang, H. H. 2009. The effects of the bacterial interaction with visible-light responsive titania photocatalyst on the bactericidal performance. Journal of biomedical science, 16(1): 7.
2
-Choi, O., Deng, K. K., Kim, N. J., Ross Jr, L., Surampalli, R. Y., and Hu, Z. 2008. The inhibitory effects of silver nanoparticles, silver ions, and silver chloride colloids on microbial growth. Water research, 42(12): 3066-3074
3
-Díez, I., Eronen, P., Österberg, M., Linder, M. B., Ikkala, O., and Ras, R. H. 2011. Functionalization of nanofibrillated cellulose with silver nanoclusters: Fluorescence and antibacterial activity. Macromolecular bioscience, 11(9): 1185-1191.
4
-Henriksson, M. 2008. Cellulose nanofibril networks and composites; preparation, structures and properties. KTH Chemical Science and Engineering. Stockholm, P:51.
5
-Kim, Y. S., Song, M. Y., Park, J. D., Song, K. S., Ryu, H. R., Chung, Y. H., ... & Hwang, I. K. 2010. Subchronic oral toxicity of silver nanoparticles. Particle and fibre toxicology, 7(1), 1.
6
-Martins, N. C., Freire, C. S., Pinto, R. J., Fernandes, S. C., Neto, C. P., Silvestre, A. J., and Trindade, T. 2012. Electrostatic assembly of Ag nanoparticles onto nanofibrillated cellulose for antibacterial paper products. Cellulose, 19(4): 1425-1436.
7
-Martins, N. C., Freire, C. S., Neto, C. P., Silvestre, A. J., Causio, J., Baldi, G., and Trindade, T. 2013. Antibacterial paper based on composite coatings of nanofibrillated cellulose and ZnO. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 417: 111-119
8
-Missoum, K., Sadocco, P., Causio, J., Belgacem, M. N., & Bras, J. 2014. Antibacterial activity and biodegradability assessment of chemically grafted nanofibrillated cellulose. Materials Science and Engineering: C, 45: 477-483
9
-Nassar, M. A., and Youssef, A. M. 2012. Mechanical and antibacterial properties of recycled carton paper coated by PS/Ag nanocomposites for packaging. Carbohydrate polymers, 89(1): 269-274.
10
-Petica, A., Gavriliu, S., Lungu, M., Buruntea, N., and Panzaru, C. 2008. Colloidal silver solutions with antimicrobial properties. Materials Science and Engineering, 152(1): 22-27.
11
-Pinto, R. J., Marques, P. A., Neto, C. P., Trindade, T., Daina, S., and Sadocco, P. 2009. Antibacterial activity of nanocomposites of silver and bacterial or vegetable cellulosic fibers. Acta biomaterialia, 5(6): 2279-2289.
12
-Rabea, E. I., Badawy, M. E. T., Stevens, C. V., Smagghe, G., and Steurbaut, W. 2003. Chitosan as antimicrobial agent: applications and mode of action. Biomacromolecules, 4(6): 1457-1465.
13
-Rai, M., Yadav, A., and Gade, A. 2009. Silver nanoparticles as a new generation of antimicrobials. Biotechnology advances, 27(1): 76-83.
14
-Sothornvit, R., & Krochta, J. M. 2001. Plasticizer effect on mechanical properties of β-lactoglobulin films. Journal of Food Engineering, 50(3): 149-155.
15
-Tang, J., & Xi, T. 2008. Status of biological evaluation on silver nanoparticles. Sheng wu yi xue gong cheng xue za zhi= Journal of biomedical engineering Shengwu yixue gongchengxue zazhi, 25(4): 958-961.
16
-Van Dong, P., Ha, C. H., and Kasbohm, J. 2012. Chemical synthesis and antibacterial activity of novel-shaped silver nanoparticles. International Nano Letters, 2(1): 1-9.
17
-Wani, I. A., Ganguly, A., Ahmed, J., and Ahmad, T. 2011. Silver nanoparticles: ultrasonic wave assisted synthesis, optical characterization and surface area studies. Materials Letters, 65(3): 520-522.
18
-Yamane, C., Aoyagi, T., Ago, M., Sato, K., Okajima, K., & Takahashi, T. 2006. Two different surface properties of regenerated cellulose due to structural anisotropy. Polymer journal, 38(8): 819-826.
19
ORIGINAL_ARTICLE
استفاده از پلی اتیلن بازیافتی برای بهبود ویژگیهای فیزیکی و مکانیکی تخته خرده چوب
هدف از این بررسی استفاده از پلی اتیلن بازیافتی برای اصلاح ویژگیهای تخته خرده چوب بوده است. بنابر این با استفاده از 3 میزان مصرف چسب 10، 7 و 4 درصد و 3 میزان مصرف پلی اتیلن بازیافتی 5، 10 و 15 درصد (بر اساس وزن خشک خرده چوب) در لایه سطحی کیک خرده چوب اقدام به ساخت تخته خرده چوب گردید. نتایج نشان داد افزایش مقدار مصرف پلی اتیلن باعث بهبود مقاومت خمشی و مدول الاستیسیته تخته های ساخته شده می گردد. به طوری که مقاومت خمشی و مدول الاستیسیته تخته های ساخته شده با کاربرد 15 درصد پلی اتیلن نسبت به تخته های شاهد به ترتیب در حدود 59 و 53 درصد افزایش داشته است. همچنین واکشیدگی ضخامت تخته ها با افزایش مصرف پلی اتیلن بهبود یافته است و حداقل واکشیدگی ضخامت 2 ساعت در شرایط مصرف چسب 10 درصد و 15 درصد پلی اتیلن بازیافتی به دست آمده است که کمتر از 10 درصد تخته های شاهد می باشد. افزایش مقدار مصرف پلی اتیلن، جذب آب تخته ها را کاهش داده است و حداقل آن در تخته های دارای 15 درصد پلی اتیلن مشاهده گردید. به طوری که با مصرف 15 درصد پلی اتیلن تا حدود 58 درصد در جذب آب 2 ساعت آنها در مقایسه با تخته های شاهد کاهش دیده شد. به طور کلی می توان بیان داشت یکی از بهترین راهکارها برای کاهش ضایعات پلیمری و تولید محصولاتی با ارزش افزوده بالا، به کارگیری آنها در جهت بهبود ویژگیهای تخته خرده چوب می باشد
https://ijwpr.areeo.ac.ir/article_101480_2f77ed325da1f2af5e52375666caf3ce.pdf
2016-12-21
557
568
10.22092/ijwpr.2016.101480
پلی اتیلن بازیافتی
تخته خرده چوب
واکشیدگی ضخامت
جذب آب
ابوالفضل
کارگرفرد
a_kargarfard@yahoo.com
1
دانشیار، بخش تحقیقات علوم چوب و فراوردههای آن، مؤسسه تحقیقات جنگلها و مراتع کشور، سازمان تحقیقات، آموزش و ترویج کشاورزی، تهران، ایران
LEAD_AUTHOR
امیر
نوربخش
nourbakhsh_amir@yahoo.com
2
دانشیار، بخش تحقیقات علوم چوب و فراوردههای آن، مؤسسه تحقیقات جنگلها و مراتع کشور، سازمان تحقیقات، آموزش و ترویج کشاورزی، تهران، ایران
AUTHOR
فرداد
گلبابائی
ijwpr@areeo.ac.ir
3
کارشناس ارشد، بخش تحقیقات علوم چوب و فراوردههای آن، مؤسسه تحقیقات جنگلها و مراتع کشور، سازمان تحقیقات، آموزش و ترویج کشاورزی، تهران، ایران
AUTHOR
-Ayrilmis, N.; Candan, Z. and Hiziroglu, S., 2008. Physical and mechanical properties of cardboard panels made from used beverage carton with veneer overlay. Material and Design 29: 1897-1903.
1
-Baoguo LI.; Zhongli P. and Yi Zh., 2007. Properties of medium density composite particleboard from creeping wild rye and HDPE plastic., 2007 ASAE Annual Meeting 076218.
2
-Borysiuk, P.; Zbiec, M.; Boruszewski, P.; Maminski, M.; Grzeskiewicz, M. and Jenczyk, T., 2011. Flat-pressed wood plastic composites mechanical and physical properties and machining capabilities. Proceedings of The International Panel Products Symposium 2011. 227-231.
3
-Deng, Y. and Furuno, T., 2000. Properties of gypsum particleboard reinforced with polypropylene fiber. Wood Sci. Journal 47(4): 445-450.
4
-Dimakis, A.; Brightwell, L.; Kems, J.; Neogi, A.; Robak, G.; Schulner, T. and Smith, JE., 2006. Reinforced wood product and methods for reinforcing a wood product. United States Patent no. 20060127633.
5
-European Standard EN 310, 1996. Wood based panels, determination of modulus of elasticity in bending and bending strength. European Standardization Committee, Brussell.
6
-European Standard EN 312, 2003. Particleboards specifications, requirements for general purpose boards for use in general conditions. European Standardization Committee, Brussell.
7
-European Standard EN 317, 1996. Particleboards and fiberboards, determination of swelling in thickness after immersion. European Standardization Committee, Brussell.
8
-European Standard EN 319, 1996. Wood based panels, determination of tensile strength perpendicular to plane of the board. European Standardization Committee, Brussell.
9
-European Standard EN 326-1: 1993. Wood based panels, Sampling, cutting and inspection. Sampling and cutting of test pieces and expression of test results.
10
-Malcolm, HD., 1992. Reinforced fiberboard. British patent. GB2248246.
11
-Mohebby, B.; Tavassoli, F. and Kazemi-Najafi S., 2010. Mechanical properties of medium density fiberboerd reinforced with metal and woven synthetic nets. Journal of Wood Prod. DOI 10.1007/s00107-010-0412-3.
12
-Muehl, J.; Krzysik, A.; Chow, P., 2004. Composite panels made with biofiber or office wastepaper bonded with thermoplastic and/or thermosetting resin. U,S. Department of Agriculture, Forest Service,Forest Product Laboratory,Volume 294 of Research Note FPL.
13
-Mura, IJ. and Mura, I., 2001. Reinforced particleboard and method for manufacturing thereof. World Intellectual Property Organization. Patent no: WO/2001/081056.
14
-Murathan, A. and Gurum-Balbas, M., 2006. Manufacturing low density boards from waste cardboards containing aluminium. Materials and Design 28: 2215-2217.
15
-Kargarfard, A., 2011. The effect of wood particles type and coupling agent content on properties of composites from recycled polypropylene and eucalyptus wood. Journal of Forest and Wood Products, Volume 64,No.1,55-64
16
ORIGINAL_ARTICLE
بررسی و مقایسه ویژگی های کاغذ روزنامه حاصل از خمیر کاغذ شیمیایی- مکانیکی (CMP) رنگبری شده چوب نارنج و زبان گنجشگ
در این تحقیق امکان استفاده از خمیرکاغذ CMP رنگبری شده چوب نارنج و زبان گنجشگ به عنوان جایگزین تمام یا بخشی از خمیرکاغذ CMP کارخانه چوب و کاغذ مازندران برای تولید کاغذ روزنامه مورد بررسی قرار گرفت. بدین منظور، ابتدا با شرایط پخت کارخانه مذکور و با Na2O 101گرم برلیتر، در دمای 165 و در زمان پخت 70 دقیقه، از چوب نارنج و زبان گنجشگ خمیرکاغذ CMP با راندمان 85 درصد تولید شد. سپس این خمیر کاغذها با پروکسید هیدروژن رنگبری و با نسبت های 15 ، 30 ، 45 و 60 درصد جداگانه با خمیرکاغذ CMP کارخانه چوب و کاغذ مازندران (نمونه شاهد) مخلوط گردید. از هر نمونه کاغذ دست ساز با وزن پایه 60 گرم برمتر مربع تهیه شد و خواص نوری و مقاومتی آن طبق آزمون های استاندارد TAPPI اندازه گیری ومورد تجزیه و تحلیل آماری قرار گرفت. نتایج نشان داد که کاغذ حاصل از خمیر CMP زبان گنجشگ درتمامی ویژگی های اندازه گیری شده (بجز روشنی) مناسب تراز نمونه شاهد و خمیر CMP نارنج(بجز ماتی) بوده است. در اثر رنگبری با پروکسید هیدروژن، روشنی، مقاومت های به پارگی، ترکیدن، کششی و طول پارگی افزایش و ماتی کاغذ حاصل کاهش داشته است. نتایج نشان داد که خمیرکاغذ خالص سفید نشده چوب نارنج و زبان گنجشگ ویژگی مطلوبی برای تولید کاغذ روزنامه را ندارد و لازم است این خمیرکاغذ ها با با پروکسید هیدروژن رنگبری شوند. به طوری کلی، بهترین ویژگی های مقاومتی نیز در کاغذ روزنامه حاصل از اختلاط 60-45 درصد خمیرکاغذ CMPنارنج و زبان گنجشگ(جداگانه) با 40-55 درصد خمیرکاغذ CMP کارخانه مشاهده گردید.
https://ijwpr.areeo.ac.ir/article_106287_768b54c2c484633a4ab4662553ead9c0.pdf
2016-12-21
569
580
10.22092/ijwpr.2016.106287
خمیر CMP
نارنج
زبان گنجشگ
رنگبری
کاغذروزنامه
خواص نوری و مقاومتی
رامین
ویسی
vaysi_r452@yahoo.com
1
دانشیار، صنایع چوب و کاغذ، دانشگاه آزاد اسلامی واحد چالوس
LEAD_AUTHOR
محمد
نیک کار
m.nikkar@yahoo.com
2
دانشآموخته کارشناسی ارشد، صنایع چوب و کاغذ، دانشگاه آزاد اسلامی واحد چالوس
AUTHOR
حمید رضا
سالاریان
salarmohamad741@yahoo.com
3
دانشآموخته کارشناسی ارشد، صنایع چوب و کاغذ، دانشگاه آزاد اسلامی واحد چالوس
AUTHOR
-Barzan A., S. Soraki, 2002. Procedure of experimental for pulp and paper, Mazandaran Wood and Paper Industries, Sari, Iran, 111-121, (in Persian).
1
- Buchert, J., Tenkanen, M., Kantelinen, A., and Viikari, L., 1994. Application of xylanases in the pulp and paper industry, Bioresource Technology, 50(1): 65-72.
2
-Cater, Henry A.,1996. The chemistry of paper preservation, Journal of Chemical Education, vol. 73, No. 11.
3
- Jeffries, T.W., and Viikari, L., 1996. Enzymes for pulpand paperprocessing, American chemical society, Washington, DC, 326p.
4
-Johansson Mattias,2000. Formation of chromospheres and leucochromopheres during manufacturing of mechanical pulp, Department of pulp and paper chemistry and technology, Royal Institute of Technology,Stockholm,Sweden.
5
-Kahnoji A, R. Moshtagh, 2000. Quality and quantity situation of the northern Iranian forests, technical office of woody, assistant of northern Iranian forests, vo.1, 23-35, (in Persian).
6
- Luiss, A.J., and Jackson, 2002. Textbook of pulping technology, McGraw-Hill, New York, NY, 126-132.
7
-Lindstom, H. ,1997. Fiber length, tracheide diameter and late wood percentage in Norway spruce, development from pith out wards , Wood and Fiber Science ,85-89.
8
- Mirshokraie S.A.., 2003. Pulp and paper technology, Aeeizh publication, Tehran, Iran, 209-210p, (Translated in Persian).
9
-Mirshokraie S.A. and Abdolkhani A.,2005. Effects of metallic ions on brightness CMP pulp of hardwoods in north of Iran, Iranian journal national resourse,58 (2), (in Persian).
10
-Nikkar,M. ,2011. Review the possibility of using CMP pulp to newsprint production from Citrus species in Mazandaran Wood and Paper Industries (MWPI), graduated of master science, Islamic Azad University of Chalous Branch, (in Persian).
11
-Rasouli G.,Resalati H., Mahdavi S.,2006.Effect of wood raw materials combination on the properties of chemi-mechanical pulp for making newsprint, journal of Pajouhesh&Sazandegi, N0:76, 69-75, (in Persian).
12
- Paullsson M. , Lucian A. , Arthur J. , 2001. Photo-yellowing of untreated chemi-thermo-mechanical pulp under argon, ambient and oxygen atmosphere, Journal of wood chemistry and technology ,21 (4).
13
-Gholamnejad,M.,2011. Effect of Willow wood on some optical and mechanical properties of newsprint from a chemi-mechanical pulp, Journal of science and techniques in natural resources, Islamic Azad University of Chalous Branch,6(2),89-103, (in Persian).
14
-Rasoligarmarodi ,A..,2001. Studying the possibility of using Aspen and Hornbeam for CMP pulp and newsprint production, graduated of master science, TarbiatModaresUniversity, (in Persian).
15
-Ravanbakhsh, M.,2008. Studying the possibility of using Bagasse CMP pulp for newsprint production, graduated o f master science, Islamic Azad University of Chalous Branch, (in Persian).
16
-RajabiKaboodCheshmeh,O., Veysi,R.,2015. Investigation and comparison of paper properties and birch and aspen CMPpulp with beech and hornbeam CMP pulp, Journal of wood and forest science and technology,Gorgan university,22(1),17-30.
17
-Seth ,R . S.,1995. The effects of fiber length & coarseness on the tensile strength of webs , TAPPI J. , N0:3., 25-28.
18
-Saint-Cyr, K., Van de Ven, T. G. M., and Garnier, G.,2002, Adsorption of yellowing inhibitors on the mechanical pulp,Journal of. Pulp and Paper Sci. 28(3), 78-83.
19
-Salehi K.,1998.Investigation and determination high yield chemi-mechanical pulp of Bagass, journal of Research Institute of Forests and Rangelands,Karaj,Iran, N0:10.(in Persian).
20
- Technical Association of Pulp and Paper Industry,2009. Standard Test Methods. TAPPI Press, Atlanta, GA.USA,.29(1), 17-20.
21
-Vaysi R.,2015.An Investigation and comparison of newsprint properties from Bamboo and Reed CMP pulps, Iranian J. of Wood and Paper Sci. and Technology 30(2), 256-265.
22
- Xu E . C . , 2002. H2o2 bleaching of mechanical pulps , Journal of pulp and paper science , 28(11),379-388
23
ORIGINAL_ARTICLE
بررسی رویکرد تولیدکنندگان داخلی مبلمان نشیمن در تولید و فروش این محصولات
امروزه کارشناسان معتبرترین بخش از صنعت مبلمان جهان، موجودیت و پتانسیل های صنعت مبلمان ایران را به رسمیت می شناسند و مهمتر این که برای آن شانس رشد و توسعه بسیار زیادی قائل هستند. هدف از این تحقیق بررسی دیدگاه تولیدکنندگان داخلی مبلمان نشیمن در زمینۀ تولید و فروش این محصولات می باشد. در این راستا با کسب اطلاع از نظر متخصصین آگاه دانشگاهی و روش های تحقیق اسنادی و پیمایشی ، پنج شاخص مؤثر بر تولید و فروش محصولات مبلمان منزل، در قالب پرسشنامه ای استاندارد طراحی شد. برای بررسی روایی پرسشنامه از روش آلفای کرون باخ و برای ارزیابی اعتبار آن از روش اعتبار محتوی استفاده گردید. رتبه بندی شاخص های اصلی با روش طیف لیکرت نشان داد که از منظر تولید کنندگان داخلی، به ترتیب شاخص های مشتری مداری، همکاری با دانشگاهیان، مبلمان وارداتی، طراحی و رضایت مندی از حمایت های دولتی و اصناف، دارای بیشترین تا کمترین درجه اهمیت در تولید و فروش محصولات مبلمان منزل هستند.
https://ijwpr.areeo.ac.ir/article_106288_33a9bbb316e31ab4cf9e0e67477bd321.pdf
2016-12-21
581
594
10.22092/ijwpr.2016.106288
شاخص
مبلمان نشیمن
تولید کنندگان داخلی
تولید
فروش
محمد
غفرانی
ghofrani@sru.ac.ir
1
دانشیار، گروه صنایع چوب، دانشکده عمران، دانشگاه تربیت دبیر شهید رجایی، تهران
LEAD_AUTHOR
افروز
غیاث وند
af.ghiyasvand@yahoo.com
2
دانشجوی کارشناسی ارشد، گروه صنایع چوب، دانشکده عمران، دانشگاه تربیت دبیر شهید رجایی، تهران
AUTHOR
- Afra, A. and Barimani,A., 2012. Investigation of the furniture world training and evaluating the Iran’s position. Iran wood and furniture industry journal, 70: 41-47.
1
- Alizadeh, H., Faezipour, M.M., Azizi, M. and Zyaei, M., 2014. Survey the situation of furniture foreign trade, determine and prioritize the influencing indexes on export development (Case Study: Household Furniture). Iranian Journal of Wood and Paper Science Research, 2(29): 299 – 309.
2
- Azar, A., Rezaei, Z., and Moradi, H., 2013. Evaluation of factors affecting in supply chain at furniture industry and identification of effective indicators to it (case study: Yaftabad zone in Tehran). Iran’s natural resources journal, 66(4): 453-465.
3
- Deros, B.Md., Saibani, N., Yunos, B., Rahman, M. and Ghani, J.A., 2012. Evaluation of Training Effectiveness on Advanced Quality Management Practices. Procedia - Social and Behavioral Sciences, 56: 67 – 73.
4
- Ebrahimi, Gh., 2013. Iran’s furniture industry needs academic and technical management in all levels. Iran wood and furniture industry journal, 83: 22-24.
5
- Fatolahzade, A., 2006. Investigation on training state of foreign furniture in Iran. Iran natural resources journal, 59(1): 237-249.
6
- Ghofrani, M., Azizi, M. and Rahimi, F., 2012. Investigation on Effective Indices in Development of Wooden Furniture Industry for Developing Countries and indicating the ways it can prove. Iran wood and furniture industry journal,67: 11.
7
- Jahangirniya, M., 2009. A brief in Iran’s the situation of furniture industry. Iran wood and furniture industry journal, 50: 57-58.
8
- Kotler, P., Keller, K.L., Brady, M., Goodman, M., Hansen, T., 2009. Marketing Management, European Edition, Prentice Hall, 899pp.
9
- Maleki Gholandoz, M., Tajdini, A., Pourmosa, Sh. and Agharafiei, E., 2014. Identifying and ranking of factors affecting customer satisfaction of the household wood furniture industry by Multi-Attribute Decision making method (Case Study: home furniture). Iranian Journal of Wood and Paper Science Research, 4(28): 691 – 708.
10
- Miller, D. and Crumtion, A., 2012. Improvement in facial aesthetic for productions of furniture industries. Iran wood and furniture industry journal, Translated by Fadavi, V. , 73: 34-38.
11
- Mohebi, B., 2009. Industries should use the individuals’ new ideas from universities. Iran wood and furniture industry journal, 43: 15-16.
12
- Najafiyan, M. and Aghababaei, H., 2014. The quantity and quality investigation of the manufacture of furniture and it’s effect on economics. Iran wood and furniture industry journal, 92: 37-41.
13
- Rangavar, H. and Khojasteh khosro, S., 2014. Investigating the Effective Index on Customer’s Choice in Buying Furniture. Iranian Journal of Wood and Paper Industries, 1(5): 153 – 164.
14
- Rahimi, F. and Ghofrani, M., 2011. The role and importance of worker’s training in the progress of Iran’s furniture industry. Iran wood and furniture industry journal, 62: 43-48.
15
- Riyahei, A., 2009. Analytic investigation of the world’s furniture training and evaluation of Iran’s position. Tehran’s furniture cluster, pages: 25.
16
- Tajdini, A., Taghadosi, A., Pourmousa, Sh., Jahan Latibari, A., Safdari, V. and Roohnia, M., 2013. Study the effective indices on wooden furniture imports in Iran. Iranian Journal of Wood and Paper Science Research, 2(28): 205 – 223.
17
- Tehraniseresht, V. and Masuri, Sh., 2009. Industry managers! How much valuable is the design of the production?. Iran wood and furniture industry journal, 50: 68-70.
18
- Tuan Hassan, T.M.R., Yaccob, M.R. and Abdullatiff, N.K., 2014. Sustaining SMEs Wood-Based Product Manufacturing through Best Practices –The Case of Indigenous Entrepreneurs in Kelantan. Procedia - Social and Behavioral Sciences 115: 221 – 234.
19
- Ziyaei, M, 2013. Looking at Iran’s furniture industry by Italian glasses. Iran wood and furniture industry journal, 82: superintendent’s note.
20
ORIGINAL_ARTICLE
اثر سنتز درونبافتی نانوذرات اکسیدروی بر خواصمکانیکی و زیستی فرآورده چوبپلیمر
در این پژوهش امکان سنتز نانوذراتاکسیدروی به روش هیدروترمال و اثر آن بر خواصمکانیکی و زیستی فرآورده چوبپلیمر صنوبر (Populous deltoides) مورد ارزیابی قرارگرفت. تحقیق به پنج تیمار شاهد، استایرن (St)، نانواکسیدروی (N)، نانوکامپوزیت (NC) و نانواکسیدروی/ استایرن (NSt) گروهبندی شد. نمونههای آزمون مکانیکی و زیستی تهیه شده براساس استانداردهای ASTM-D143 و EN113، در سیلندر اشباع، به روش خلاء- فشار، اشباع شدند. در آزمون مکانیکی، برای هر تیمار 5 تکرار و در آزمون زیستی، برای هر تیمار 10 تکرار در نظر گرفته شد. تصاویر میکروسکوپ الکترونی حضور نانوذرات-اکسیدروی در دیواره سلولی و استایرن در حفرات سلولی را تاییدنمود. نتایج نشانداد که مقاومتخمشی، مدولخمشی، سختی و فشار موازیالیاف در تیمار NSt با بالاترین بهبود نسبت به نمونه شاهد، به ترتیب 74/36، 23/40، 58/60 و07/25 درصد افزایش یافت. مقاومت به پوسیدگی نمونههای تیمار شده نیز نسبت به نمونههای شاهد افزایش یافت، به طوریکه بیشترین کاهش وزن در نمونههای شاهد، 81/25 درصد و کمترین کاهش وزن در تیمار NSt، 37/3 درصد مشاهده شد.
https://ijwpr.areeo.ac.ir/article_106761_e08bd648d87da2c9cd4dca27f62237b2.pdf
2016-12-21
566
576
10.22092/ijwpr.2016.106761
چوبپلیمر
خواص مکانیکی
فرآیند هیدروترمال
مقاومت به پوسیدگی
نانواکسیدروی
الهام
حاتم زاده عربی
ehatamzade@yahoo.com
1
دانشجوی کارشناسی ارشد، گروه مهندسی چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه علوم کشاورزی و منابع طبیعی ساری
AUTHOR
مریم
قربانی
ghorbani_mary@yahoo.com
2
دانشیار، گروه مهندسی چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه علوم کشاورزی و منابع طبیعی ساری
LEAD_AUTHOR
پوریا
بی پروا
p.biparva@sanru.ac.ir
3
استادیار، گروه علوم پایه، دانشگاه علوم کشاورزی و منابع طبیعی ساری
AUTHOR
- Akhtari, M., Taghiyari, H.R., Ghorbani Kokandeh, M., 2013. Effect of some metal nanoparticles on the spectroscopy
1
analysis of Paulownia wood exposed to white-rot fungus, European Journal of wood and wood products. 71 (2):283-
2
285.
3
- Atalla, R., Beecher, J., Caron, R., Catchmark, J., Deng, Y., Glasser, W., Gray, D., Haigler, C., Jones, P., Joyce, M.,
4
Kohlman, J., Koukoulas, A., Lancaster, P., Perine, L., Rodriguez, A., Ragauskas, A., Wegner, T. and Zhu, J., 2006.
5
Nanotechnology for the forest products industry. Vision and technology roadmap. Agenda 2020 Technology
6
Alliance.
7
- Clausen, C.A., 2007. Nanotechnology: Implications for the Wood Preservation Industry. International Research Group on Wood Protection. Stockholm, Sweden, IRG/WP/07-30415, 15.
8
- Devi, R.R. and Maji, T.K., 2007. Effect of Glycidyl Methacrylate on the Physical Properties of Wood–Polymer Composites. Journal of Polymer composite. DOI 10.1002/pc. 20265.
9
- Freeman, M., and Mcintyre, C., 2008. Comprehensive review of copper-based wood preservatives. Forest Products Journal, (11): 6-27.
10
- Ghorbani Kookandeh, M., Siahposht, H., Taghiyari, H. R., 2014. Effects of heat treatment and impregnation with zinc oxide nanoparticles on physical, mechanical, and biological properties of beech wood, Wood Science and Technology. 48:727–736.
11
- Ghorbani Kookandeh, M., Akhtari, M., Taghiyari, H.R., 2013. Effect of nano zinc-oxide on the physical and mechanical properties of Paulownia wood (Paulownia fortunei), Iranian Journal Wood and paper industries. 4(1):75-82.
12
- Hill, C.A.S., Hale, M.D., Ormondroyd, G.A., Kwon, J.H. and Forster, S.C., 2006. Decay resistance of anhydride-modified Corsican pine sapwood exposed to the brown rot fungus Coniophora puteana. Holzforschung, 60: 625-629.
13
- Jani, M., Rozman, D. and Rahim, S., 2007. Rubber wood-polymer Composites: The Effect of Chemical Impregnation on the Mechanical and Physical Properties. Malaysian Polymer Journal. 2(2): 1-11.
14
- Kartal, S., Green, F. and Clausen, C., 2009. Do The Unique Properties Of Nanometals Affect Leachability Or Efficacy Against Fungi And Termites? International Biodeterioration and Biodegradation, 63: 490-495.
15
- Lee, S.D., Kim, J.S. and Seo J.H., 2012. Synthesis and Photocatalytic Property of Zno Nanoparticles Prepared By Spray- Pyrolysis Method, Physics Procedia, 32: 320- 326.
16
- Lowniczak, V.M., 1994. Method of production of the composite Bamboo polystyrene elaborated in Poland. Paper presented on international bamboo festivaland national Bamboo convention 1, Bandung, Indonasia.
17
- Marzbani, P., Mohammadnia Afrouzi, Y., Omidvar, A., 2015. The effect of nano-zinc oxide on particleboard decay resistance, Maderas Ciencia y Technologia. 17(1): 63-68.
18
- Matsunaga, H., Kigushi, M. and Evans, P., 2007. Micro-distribution of metals in wood treated with a nano-copper wood preservative. International Research Group on Wood Protection, Stockholm, Sweden, IRG/WP/07-40360, 7.
19
- Mousavi Hosseini, M.J., Faezipour, M. and Yousefi, H., 2011. Effect of nanoclay on the properties of medium density fiber board (MDF). Iranian Journal of Wood and Paper Science Research, 26(4): 699-707.
20
- Omidvar, A., 2009. Wood polymer composite. Gorgan University of Agricultural Sciences and Natural Resources press, Gorgan.
21
- Ramimoghadam, D., Hussein, M. and Taufiq-Yap, Y., 2012. The Effect of Sodium Dodecyl Sulfate (SDS) and Cetyltrimethylammonium Bromide (CTAB) On the Properties of Zno Synthesized By Hydrothermal Method. International Journal of Molecular Sciences, 13: 13275-13293.
22
- Ramimoghadam, D., Hussein, M. and Taufiq-Yap, Y., 2012. The Effect of Sodium Dodecyl Sulfate (SDS) and Cetyltrimethylammonium Bromide (CTAB) On the Properties of Zno Synthesized By Hydrothermal Method. International Journal of Molecular Sciences, 13: 13275-13293.
23
- Saiful Islam, Md., Hamdan, S., Rezaur Rahman, Md., Jusoh, I. and Ahmed, A.S., 2011. The effect of crosslinker on mechanical and morphological properties of tropical wood material composites. Materials and Design, 32(4): 2221- 2227.
24
- Sharma, D. and Arun, N., 2011. Synthesis of Zno Nanoparticles Using Surfactant Free In-Air and Microwave Method. Applied Surface Science,257: 9661-9672.
25
- Sharifnia, H. and Mohebby, B., 2010. Enhanced Mechanical Properties of Poplar Wood by a Combined-Hydro-Thermo- Mechanical (CHTM) Modification. Iranian Journal Wood and paper industries, 1(1): 57-66.
26
- Stolf, D.O. and Roco Lahr, F.A., 2004. Wood- polymer composites: Physical and Mechanical properties of some wood species impregnated with styrene and methyl methacrylate. Materials Research, 7(4): 611- 617.
27
- Yang, Z.L., 2004. Zinc Oxide Nanostructures: Growth, Properties and Applications. Journal of Physics, Condensed Matter, 16: 829-R858.
28
- Zhang, Y., Qian, W. and Zhang, j., 2009. Preparation of Zno Nanoparticles by a Surfactant-Assisted Complex Sol–Gel Method Using Zinc Nitrate. Journal of Sol-Gel Science and Technology, 51: 198-203.
29
ORIGINAL_ARTICLE
اثر اصلاح ترکیبی گلوتارآلدئید/پارافین بر ویژگیهای زیستی و مکانیکی چوب صنوبر (Populus deltoides)
در این تحقیق ویژگیهای مکانیکی و زیستی چوب صنوبر اصلاحشده با گلوتارآلدئید و پارافین بررسی شد. اصلاح با گلوتارآلدئید در 3 سطح غلظت 5، 10 و 20درصد همراه با کاتالیزور کلریدمنیزیم و متعاقباً در سطوح اصلاح ترکیبی، اشباع با پارافین بهروش خلا-فشار انجام شد. افزایش سطح غلظت گلوتارآلدئید، به افزایش وزن و حجیمشدگی دیواره سلولی چوب منتهیشد که متعاقب آن میزان نفوذ پارافین به ساختار متخلخل چوب کاهش یافت. مقاومت زیستی در معرض قارچ پوسیدگی سفید و خواص مکانیکی بهترتیب طبق استانداردهای EN113و ASTM D143-94 اندازهگیری شد. تصاویر ریزنگار الکترونی گسیلمیدانی گویای حجیمشدگی دیوارهها و حضور پارافین در حفرات بود. در بررسی پایداری حرارتی، با افزایش شدت اصلاح، میزان افتجرم روند کاهشی داشت که این امر بهدلیل ایجاد اتصالات عرضی بین گلوتارآلدئید و پلیمرهای دیوارهای است. نتایج آزمون خواص مکانیکی نشان داد که ورود پارافین در سطوح اصلاح ترکیبی حاوی 10 و 20درصد گلوتارآلدئید، بهبود معنیدار مدولالاستیسیته را بههمراهداشت. گلوتارآلدئید به کاهش مقاومت خمشی انجامید که حضور پارافین آنرا در سطوح اصلاحشده بهبودبخشید. حضور گلوتارآلدئید به بهبود فشار موازی الیاف و سختی منتهیشد که در اصلاحترکیبی این اثر محسوستر بود. اصلاح گلوتارآلدئید موجب بهبود مقاومت در معرض قارچ پوسیدگی سفید گردید که این نیز در حضور پارافین افزایش معنیداری نشان داد. بهبود مقاومت چوباصلاحشیمیاییشده در برابر قارچپوسیدگی سفید را میتوان به کاهش رطوبت چوب، حجیمشدن دیوارهسلولی و مسدود شدن منافذ ریز دیواره نسبت داد.
https://ijwpr.areeo.ac.ir/article_106762_e4e57ca1be0eff0698fa182eac2d9fdc.pdf
2016-12-21
606
620
10.22092/ijwpr.2016.106762
گلوتارآلدئید
پارافین
خواص مکانیکی
پوسیدگی سفید
ندا
اسماعیلی
neda.esmaeeli1990@yahoo.com
1
دانشجوی کارشناسی ارشد، گروه مهندسی چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه علوم کشاورزی و منابع طبیعی ساری
AUTHOR
مریم
قربانی
ghorbani_mary@yahoo.com
2
دانشیار، گروه مهندسی چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه علوم کشاورزی و منابع طبیعی ساری
LEAD_AUTHOR
پوریا
بی پروا
p.biparva@sanru.ac.ir
3
استادیار، گروه علوم پایه، دانشگاه علوم کشاورزی و منابع طبیعی ساری
AUTHOR
- Abdolzadeh, H., Ebrahimi, G., Layeghi, M., Ghassemieh, M. and Mirshokrai, S.A., 2014. Mechanical properties of Beech -Furfuryl alcohol wood polymer. Iranian Journal of Wood and Paper Industries, 4(2): 131–140.
1
- Blanchette, R.A., Krueger, E.W., Haight, J.E., Akhtar, M. and Akin, D.E., 1996. Cell wall alterations in loblolly pine wood decayed by the white-rot fungus Ceriporiopsis subvermispora. Biotechnol, 53: 203–213.
2
- Bodirlau, R., Teaca, C.A. and Spiridon, T., 2008. Chemical modification of Beech wood: Effect on thermal stability. Bioresources, 3(3): 789-800.
3
- Bourgois, J., Bartholin, M.C. and Guyonnt, R., 1989. Thermal treatment of wood: Analysis of the obtained product. Wood Science and Technology, 23: 303-310.
4
- Buchelt, B., Dietrich, T. and Wagenfu¨hr, A., 2012. Macroscopic and microscopic monitoring of swelling of beech wood after impregnation with furfuryl alcohol. European Journal of Wood and Wood Product, 70 (6): 865-869.
5
- Esteves, B., Nunes, L., Domingos, I. and Pereira, H., 2014. Improvement of termite resistance, dimensional stability and mechanical properties of pine wood by paraffin impregnation. European Journal of Wood and Wood Products, 72: 609–615.
6
- Flournoy, D.S., Kirk, T.K. and Highley, T.L., 1991. Wood decay by brown-rot fungi: Changes in pore structure and cell wall volume. Holzforschung, 45: 383–388.
7
- Ghosh, S.C., Militz, H. and Mai, C., 2008. The efficacy of commercial silicones against blue stain and mould fungi in wood. European Journal of Wood and Wood Products, 67: 159–167.
8
- Hill, C.A.S., 2008. The reduction in the fibre saturation point of wood due to chemical modification using anhydride reagents: a reappraisal. Holzforschung, 62:423–428.
9
- Li, Y., Dong, X., Lu, Z., Jia, W. and Liu, Y., 2013. Effect of Polymer In Situ Synthesized from Methyl Methacrylate and Styrene on the Morphology. Thermal Behavior, and Durability of Wood. Journal of Applied Polymer Science, 128(1): 13- 20.
10
- Mai, C., Xie, Y., Xiao, Z., Bollmus, S., Vetter, G., Krause, A. and Militz, H., 2007. Influence of the Modification with Different Aldehyde-based, Agents on the Tensile Strength of Wood. European Conference on Wood Modification 2007.
11
- Moheby, B., 2005. Attlenuated total reflection Infrared spectroscopy of white rot decay beech wood. International Biodeterioration & Biodegradation, 55(4): 247- 251.
12
- Mundigler, N. and Rettenbacher, M., 2005. Natwood technology a material thermal wood modification. In: Hill CAS, Militz H (eds) The Second European Conference on Wood Modification. Go¨ttingen, Germany, 270–275.
13
- Neyestani, F., 1987. Effect of several improvement approaches on the Iranian domestic wood species for utilization in loom industry. M.Sc. thesis, Department of Wood Science and Technology, Tehran University, 88p.
14
- Papadopoulos, A.N. and Hill, C.A.S., 2002. The biological effectiveness of wood modified with linear chain carboxylic acid anhydrides against Coniophora puteana. Holz Roh Werkst, 60: 329–332.
15
- Rowell, R.M., 2005. Chemical modification of wood. In: Handbook of wood chemistry and wood composites. Rowell, R.M. (Ed) Taylor and Francis, Boca Raton, 381–420p.
16
- Sailer, M. and Van Etten, B., 2004. Potential wood protection strategies using physiological requirements of wood degrading fungi. Heron, 49:327–337.
17
- Schneider, M.H., Phillips, J.G., Tingley, D.A. and Brebner, K.I., 1990. Mechanical properties of polymer-impregnated sugar maple. Forest Product Journal, 40(1), 37–41.
18
- Scholz, G. Krause, A. and Militz, H. (2012) Volltra¨nkung modifizierten Holzes mit Wachs. European Journal Wood Product, 70:91–98pp.
19
- Scholz, G., Krause, A., and Militz, H., 2010. Exploratory study on the impregnation of Scots pine sapwood (Pinus sylvestris L.) and European beech (Fagus sylvatica L.) with different hot melting waxes. Wood Science and Technology, 44: 379–388.
20
- Standard test method for small clear specimens of timber. Designation, West Conshohocken, American Society for Testing and Materials, ASTM- D143 Standard, 1994.
21
-Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials, ASTM D2395-14e1 Standard, 2014.
22
- Ukrainczyk, N., Kurajica, S. and Šipuši, J., 2010. Thermophysical Comparison of Five Commercial Paraffin Waxes as Latent Heat Storage Materials. Chemical and biochemical engineering quarterly, 24 (2), 129–137.
23
- Vihavainen, T., Piispanen, K. and Mansikkmäki, P., 1980. Treatment of wood with formaldehyde, Acid catalysis of the reaction between formaldehyde and wood. International Research Group on Wood Preservation, Doc. No. IRG/WP 3146.
24
- Winandy, J.E., Rowell, R.M., 1984. The chemistry of wood strength. In: The chemistry of solid wood. Advances in chemistry. American chemical society, Washington, DC, 207: 211-255.
25
- Wood preservatives. Method of test for determining the protective effectiveness against wood destroying basidiomycetes – Determination of the toxic values. Beuth Verlag GmbH, Berlin, European standards, EN 113, 1996.
26
- Xiao, Z., Xie, Y., Militz, H. and Mai, C., 2010a. Effect of glutaraldehyde on water related properties of solid wood. Holzforschung, 64: 475–482.
27
- Xiao, Z., Xie, Y., Militz, H. and Mai, C., 2010b. Effects of modification with glutaraldehyde on the mechanical properties of wood. Holzforschung, 64: 483–488.
28
- Xie, Y., Krause, A., Militz, H., Turkulin, H., Richter, K. and Mai, C., 2007. Effect of treatments with 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU) on the tensile properties of wood. Holzforschung, 61:43–50.
29
- Xie, Y., Callum, A., Hill, S., Xiao, Z., Mai, C., and Militz, H., 2011. Dynamic water vapour sorption properties of wood treated with glutaraldehyde. Wood Science and Technology, 45: 49–61.
30
- Xiao, Z., Xie, Y. and Mai, C., 2012. The fungal resistance of wood modified with glutaraldehyde. Holzforschung, 66: 237–243.
31
- Xie, Y., Qiliang, F. and Wang, Q., 2013. Effects of chemical modification on the mechanical properties of wood. European Journal of Wood and Wood Products, 71: 401–416.
32
- Yasuda, R. and Minato, K., 1994. Chemical modification of wood by non-formaldehyde cross-linking reagents. Part 1. Improvement of dimensional stability and acoustic properties. Wood Science and Technology, 28: 101–110.
33
- Yasuda, R., Minato, K. and Norimoto, M., 1994. Chemical modification of wood by nonformaldehyde crosslinking reagents. Part 2. Moisture adsorption and creep properties. Wood Science and Technology, 28: 209–218.
34
- Yusuf, S., 1996. Properties enhancement of wood by cross-linking formation and its application to the reconstituted wood products. Wood Research, 83: 140–210.
35
ORIGINAL_ARTICLE
بررسی ظرفیت تحمل تنش کششی و فشاری با اتصال دهنده فلزیv– شکل در اتصالات گوشه
این پژوهش با هدفبررسی ظرفیت تحمل تنش در اتصالهای گوشهای فارسی ساختهشدهبا اتصالدهنده فلزیv- شکل و مقایسه آن با اتصال کلید پاپیونی در زیر بارکششی و فشاری انجام شدهاست. متغیرهای تحقیق عبارت بودند از نوع اعضای اتصال (تخته خرده چوب و MDF)، تعداد اتصالدهنده در 3 سطح 2، 3و 4 عدد، و ارتفاع اتصالدهنده در دو ارتفاع (7و 10 میلیمتر) ؛ همچنین، هر نوع اتصال در دو حالت با چسب و بدون چسب بررسی شد. نتایج نشان داد که ظرفیت تحمل تنش اتصالها زیر بار فشاری بیشتر از ظرفیت تحمل تنش زیر بار کششی بود. ظرفیت تحمل تنش اتصالهای ساخته شده با اعضا MDF نسبت به اتصالهای ساخته شده با تخته خرده چوب بیشتر بود. اتصالهای ساخته شده با چسب نسبت به اتصالهای ساخته شده بدون چسب عملکرد بهتری داشتند. افزایش تعداد و ارتفاع اتصالدهنده v- شکل باعث افزایش ظرفیت تحمل تنش شد.به طور کلی استفاده از اتصالدهنده v- شکل به دلیل هزینه کم، عدم نیاز به یک مرحله کاری بیشتر جهت برش شکاف اتصال، نصب یک مرحلهای، سریع، و آسان و همچنین ظرفیت تحمل تنش بیشتر بر اتصال کلید پاپیونی ترجیح دارد. مطابق نتایج، حداکثر ظرفیت تحمل تنش MPa7/13و MPa 28 در حالت بدون چسب و با چسب اتصال دهنده v- شکل، استفاده از اعضای MDF با ارتفاع اتصال دهنده 10 میلی متر و تعداد 4 عدددر حالت بدون چسب ،و استفاده از اعضای اتصال MDFبا ارتفاع اتصالدهنده 10 میلی متر و تعداد 3 عدد در حالت اتصالدهنده به همراه چسببه تولیدکنندگان کابینت، دکورسازان و مبل سازان پیشنهاد می گردد.
https://ijwpr.areeo.ac.ir/article_106763_8d6da7011e1c8719e52b7305a3d32993.pdf
2016-12-21
621
633
10.22092/ijwpr.2016.106763
صنعت کابینت سازی
اتصال گوشهای
کشش و فشار قطری
ظرفیت تحمل تنش
تخته فیبر با دانسیته متوسط(MDF)
اتصال V
حمید رضا
تقییاری
htaghiyari@yahoo.com
1
دانشیار، گروه صنایع چوب، دانشکده مهندسی عمران، دانشگاه تربیت دبیر شهیدرجائی، تهران
LEAD_AUTHOR
محمد
غفرانی
ghofrani@sru.ac.ir
2
دانشیار گروه صنایع چوب، دانشکده مهندسی عمران، دانشگاه تربیت دبیر شهیدرجائی، تهران
AUTHOR
فرزاد
اربابی قمصری
faarbabi@yahoo.com
3
کارشناس ارشد گروه صنایع چوب، دانشکده مهندسی عمران، دانشگاه تربیت دبیر شهیدرجائی، تهران
AUTHOR
- Altun, S., Burdurlu, E. & Kılıç, M., 2010. Effect of adhesive type on the bending moment capacity of miter frame corner joints. BioResources, 5(3), 1473-1483.
1
- Atar, M., Ozcifci, A., Altinok, M. and Celikel, U., 2009. Determination of diagonal compression and tension performances for case furniture corner joints constructed with wood biscuits. Materials & Design. 30: 665-670.
2
- Dalvand, M., Ebrahimi, GH. Rostampour Haftkhani, A. and Maleki, S., 2012. Analysis of factors affecting diagonal tension and compression capacity of corner joints in furniture frame fabricated with dovetail key, Journal of Forestry Research. 24(1)155-168- Ebrahimi, gh, 2008. Engineering Design of Furniture Structure. Press of uni. Tehran.
3
-European standard, 1993. EN 310: Wood-Based Panels. Determination of Modulus of Elasticity in Bending and of Bending Strength[English version].
4
- European standard, 1993. EN 319: Particleboards and Fibreboards. Determination of tensile strength perpendicular to the plane of the board [English version].
5
- European standard, 1993. EN 323: Wood-Based Panels.Determination of density [English version].
6
- Kasal, A., 2008. Effect of the number of screws and screw size on moment capacity of furniture corner joints in case construction. Forest products journal, 58(6), 36.
7
- Lashgari, A., Khodayari, P. and Mohamadi, S.A., 2012. Withdrawal strength and bending resistance of L -shaped nail ′s joint in particleboard and MDF, Iranian Journal of Wood and Paper Science Research Vol. 27 No. (4), 2012.
8
- Maleki, S., Dalvand, M., Haftkhani, A.R. and Faezipour, M., 2013. The effect of adhesive types and dovetail fitting height on stress carrying capacity of Miter Frame corner joints constructed of particleboard and Medium Density Fiberboard (MDF), Iranian Journal of Wood and Paper Industries, 66(2):203-214.
9
- Maleki, S., Derikvand, M., Dalvand, M., & Ebrahimi, G., 2012. Load carrying capacity of mitered furniture corner joints with dovetail keys under diagonal tension load. Turkish Journal of Agriculture and Forestry, 36(5), 636-643.
10
- Ozkaya, K., Burdurlu, E., Ilce, A. C., & Ciritcioglu, H. H., 2010. Diagonal tensile strength of an oriented strand-board (OSB) frame with dovetail corner joint. BioResources, 5(4), 2690-2701.
11
- Taghiyari HR, Ghofrani M, Arbabi Ghamsari F., 2017. Effects of adhesive and loading directions on the load-carrying capacity of V-nails. Maderas, Ciencia y tecnologia 19(1): 113 – 124..
12
ORIGINAL_ARTICLE
بررسی جایگاه صنعت چوب و کاغذ درمیان بخشهای اقتصادی ایران با رویکرد داده-ستانده
با توجه به اهمیت صنعت چوب و کاغذ برای اقتصاد ایران و ارتباط این بخش با سایر بخشها، مطالعه حاضر با هدف بررسی ارتباطات متقابل و پیوند بین بخش چوب و کاغذ با دیگر بخشهای اقتصادی صورت گرفته است. برای این منظور از جدول داده- ستانده سال 1380 و روش سنتی و نوین حذف فرضی ، استفاده شده است. محاسبه شاخص حساسیت انتشار و نیز شاخص قدرت انتشار صنعت چوب و کاغذ به ترتیب با ارقام 451/2 و 378/1 حاکی از آن است که این صنعت رتبه اول حساسیت انتشار و رتبه سوم قدرت انتشار را در بین بخش ها به خود اختصاص داده و این بدین معنی است که صنعت چوب و کاغذ پیوند پسین و پیشین قوی با سایر بخش ها دارد.همچنین ارتباط این صنعت نیز با سایر بخش ها به طور یکسان و متوازن در بیشتر بخش ها توزیع شده است.در صورت حذف فرضی این صنعت از دیدگاه ستانده کاهش تولید به میزان 112345678 ریال(الگوی لئونتیف)و 132456789 ریال (الگوی گش) می باشد.از نظر کشش تولید رتبه 19 را از 34 بخش به خود اختصاص داده است.
https://ijwpr.areeo.ac.ir/article_106765_900d09109b28a1853aac14dcf90b3404.pdf
2016-12-21
634
647
10.22092/ijwpr.2016.106765
بخش چوب و کاغذ
جدول داده- ستانده
پیوندهای پسین و پیشین
روش حذف فرضی
مریم
لشکری زاده
lashkarizadehm@yahoo.com
1
استادیار، گروه اقتصاد، واحد فیروزکوه، دانشگاه آزاد اسلامی، فیروزکوه، ایران
LEAD_AUTHOR
محمدرضا
برهلنی
2
کارشناس ارشد، گروه اقتصاد، دانشگاه آزاد اسلامی واحد فیروزکوه
AUTHOR
-Abrishami, H., 1996. Iran economic, Corporation of Cultural and Scientific Publication. Tehran. (In Persian)
1
-Amirtemouri, S. and Khalilian, S., 2007. The growth of total factors productivity of agricultural sector in iran and its perspective in the fourth development plan. Agricultural Economic and Development Quarterly, 59:37-52. (In Persian)
2
-Atvan, M., 2007. Calculating the backward and forward linkages of economic activities in Iran (based on the hypothetical extraction method). Iranian Economic Accounts Quarterly, 2: 26-43. (In Persian)
3
-Banouei, A.A., Bazzazan, F., Mirzaei, H. and Karami, M., 2011. Avaluation the importance of the regional economic sections based on spatial linkages: A case study in Golestan province. Journal of Humanities and Social Sciences, 41. (In Persian)
4
-Banouei, A.A., Jeloudari Mamghani, M. and Mohagheghi, M., 2007. Identifying key sectors based on demand and supply approaches. The Economic Research. 7(1): 1-30. (In Persian)
5
-Bazzazan, F., 2005. Analysis of transport sector in Iran economy. The Journal of Planning and Budgeting. 94: 53-78. (In Persian)
6
-Bidabad B., 2004. Inter-industry linkages and employment targeting policy for iran. Agricultural Economic and Development Quarterly, 46:107-135. (In Persian)
7
-Cai, L. and Leung, P., 2004. Linkage measures: A revisit and a suggested alternatives. Economic Systems Research, 16 (1): 65-85.
8
-Cella, G., 1984. The Input-output measurement of interindustry linkages. Oxford Bulletin of Economics and Statistics, 46 (1):73-84.
9
-Clements, B.J., 1990. On the decomposition of normalization of interindustry linkages. Economic letters, 4: 337-340.
10
-Clements, B.J. and Rossi, J.W., 1991. Interindustry linkages and economic development: The case of Brazil reconsidered. Developing Economies, 29 (2): 166-187.
11
-Dietzenbacher, E., 2000. Interregional multipliers: Looking backward, looking forward. Regional Studies, 36 (2): 125-136.
12
-Dietzenbacher, E. and van der Linden, J., 1997. Sectoral and spatial linkages in the EC production structure. Journal of Regional Science, 37 (2): 235-57.
13
-Dietzenbacher, E., Van der Linden, J. and Steenge, A., 1993. The regional extraction method: EC input-output comparisons. Economic Systems Research, 5: 185-206.
14
-Dolinar, Loverence, 2015.”Intersectoral Linkages in the Slovenian Economy in the years 2010”14 International Input-output conferences, http://www.iioa.org
15
-Duarte, R., Sanchez-Choliz, J. and Bielsa, J., 2002. Analysis water use in the Spanish economy: an input-output approach. Ecological Economics, 43: 71- 85.
16
-Fadaei, M., 2011. Product life cycle, Iran wood, furniture and paper Industry Magazine, 61:50-55.
17
-Iran Statistical center, Regional accounts, 2001-2006 years. (In Persian)
18
-Jahangard, E., 1998. Identification of key activities of the Iranian economy in an economic development plan. The Journal of Planning and Budgeting. 31, 32: 99-123. (In Persian)
19
-Jahangard, E., 2011. The importance of the oil industry in the creation of employment and the economy of Iran, Waleed and its impact on other economic activities.the journal of growth and development economy.1,2,2011. (In Persian)-http://www. RISI .com/
20
-Kim, C.H., Moon, J.M., Kim, E.G., & Ahn, B.I., 2010. Input-output analysis for pulp, paper and paper product industries. Palpu Chongi Gisul/Journal of Korea Technical Association of the Pulp and Paper Industry, 42(4), 45-55.
21
-Kourakinezhad, ZH. and Najafi, B.A.D., 2008. Investigating interaction effects among iranian economic sectors with emphasis on agricultural sector. Agricultural Economic and Development Quarterly, 63:139-158. (In Persian)
22
-Kula, M., 2008. Supply-use and input-output tables, backward and forward linkages of the Turkish economy. 16th Inforum world Conference in Northern Cyprus. September 1- 5.
23
-Miller, R.E. and Blair, P.D., 1985. Input-output analysis: Foundations and extensions. Prentice Hall, New Jersey. Chap. 1.
24
-O’Callaghan, M. And Yue, G., 2000. Intersectoral linkages and key sectors in China 1987-1977. An application of input-output linkage analysis. 13th international conference on input-output techniques. August 21-25.
25
-Sameti, M. And Majid Naraghi, M., 2003. Study of employment and importance of agricultural sector in an economic development program (by using the input- output table). Paper presented at the conference on agriculture and national development, in Tehran, Iran. (In Persian)
26
-Tzimos, C., Papadimitriou, I. and Adamou, N., 2014. “The Measurment of Interindustry Linkages with Data Analysis Methods”, 16th International Input-Output Conference in Istanbul, Turkey.
27
-Sanchez-Choliz, J. and Duarte, R., 2003. Analysing pollution by way of vertically integrated coefficients with application to the water sector in Aragon. Journal of Economics, 27: 433-448.
28
ORIGINAL_ARTICLE
بررسی ویژگیهای تخته تراشه جهت دار (OSB) ساخته شده از مخلوط کلنهای ده ساله صنوبر
در این تحقیق اثر رطوبت کیک و حرارت پرس بر خواص فیزیکی و مکانیکی تخته تراشه جهتدار سهلایه مورد ارزیابی قرار گرفت. تختههای آزمایشگاهی به ضخامت 12 میلیمتر، در حالی که جهت تراشههای لایه سطحی در جهت طول تخته و جهت تراشههای لایه میانی ، عمود بر لایه سطحی بود، از مخلوط چوب سه کلن ده ساله صنوبر دو رگه (populus euramericana vernirubensis, p. e. I-214 , p. e. 561/41 ) ، با استفاده از دو سطح رطوبت کیک 7 و10 درصد و سه سطح حرارت پرس180، 200 و220 درجه سانتیگراد ساخته شدند. در کلیه تیمارها، دانسیته تخته ها 7/0 گرم بر سانتیمتر مکعب، زمان پرس 8 دقیقه و نوع چسب مصرفی؛ فنل فرمالدئید به میزان 7 درصد وزن خشک چوب بود. خواص مکانیکی و فیزیکی تختههای آزمونی، بر پایۀ استاندارد اروپایی (EN 300) جهت تولید تخته تراشه جهت دار نوع 1 و نوع 2 مورد ارزیابی قرار گرفت. نتایج حاصل نشان داد که افزایش رطوبت کیک اثر بسیار معنیداری بر افزایش ویژگیهای خمشی تختهها داشت به طوری که بالاترین مدول گسیختگی در رطوبت کیک 10 درصد و حرارت پرس 220 درجه سانتیگراد و بالاترین مدول الاستیسیته در رطوبت کیک 10 درصد و حرارت پرس 180 درجه سانتیگراد به دست آمد. افزایش حرارت پرس نیز اثر بسیار معنی داری در افزایش مدول گسیختگی تختهها و همچنین اثر معنی داری در کاهش واکشیدگی ضخامت 24 ساعت تخته ها داشت. کمترین واکشیدگی ضخامت 24 ساعت در رطوبت کیک 7 درصد و حرارت پرس 220 درجه سانتیگراد به دست آمد. بالاترین چسندگی داخلی در رطوبت کیک 7 درصد و حرارت پرس 200 درجه سانتیگراد به دست آمد.در مجموع در تمامی حالتها خصوصیات تختههای تولید شده بیشتر از حد استاندارد مورد نیاز بود.
https://ijwpr.areeo.ac.ir/article_106766_6009c4181949ec02753245b5f64b6e43.pdf
2016-12-21
648
661
10.22092/ijwpr.2016.106766
تخته تراشه جهت دار
صنوبر
کلن
زمان پرس
رطوبت کیک
فنل فرمالدیید
عباس
تمجیدی
abbastamjidi@yahoo.com
1
دانشجوی دکتری تخصصی،گروه علوم و صنایع چوب وکاغذ،دانشگاه آزاد اسلامی،واحد علوم وتحقیقات تهران
AUTHOR
محمدمهدی
فایزی پور
mfaezi@ut.ac.ir
2
استاد،گروه علوم و صنایع چوب و کاغذ،دانشکده منابع طبیعی،دانشگاه تهران
LEAD_AUTHOR
کاظم
دوست حسینی
kdoosthoseini@ut.ac.ir
3
استاد،گروه علوم و صنایع چوب و کاغذ،دانشکده منابع طبیعی،دانشگاه تهران
AUTHOR
قنبر
ابراهیمی
ibrahimi@ut.ac.ir
4
استاد،گروه علوم و صنایع چوب و کاغذ،دانشکده منابع طبیعی،دانشگاه تهران
AUTHOR
حبیب الله
خادمی اسلام
hkhademieslam@gmail.com
5
دانشیار،گروه علوم و صنایع چوب و کاغذ،دانشگاه آزاد اسلامی،واحد علوم و تحقیقات تهران
AUTHOR
-Akrami, A., Barbu, M.C. and Fruehwald, A., 2014a. Characterization of properties of oriented strand boards from beech and poplar.EuropeanJournal of Wood and Wood Products, 72: 393-398.
1
-Akrami, A., Fruehwald, A. and Barbu, M.C., 2014b. The effect of fine strands in core layer on physical and mechanical properties of oriented strand boards (OSB) made of beech (Fagus sylvatica) and poplar (Populus tremula). EuropeanJournal of Wood and Wood Products, 72: 521-525.
2
-APA, 2001. The Engineered Wood Association.
3
-Banoun, F., Morgan, D., Viart, M. and Zsuffa, L., 1984. The poplar: A multi-purpose tree for forestry development. Unasylva (FAO) 36(3): 23-33.
4
-Bayatkashkoli, A. and Faegh, M., 2014. Evaluation of mechanical properties of laminated strand lumber and oriented strand lumber made from poplar wood (populus deltoides) and Paulownia (Paulownia fortunei) with urea-formaldehyde adhesive containing nanoclay. International Wood Products Journal, 5 (4): 192-195
5
-Biblis, E.J., 1985. Properties of three-layer oriented strand board from southern hardwoods. Forest Products Journal, 35(2): 28-32.
6
-Carino, H.F. and foronda, S.U., 1990. SELECT: A model for minimizing blank costs in hardwood furniture manufacturing. Forest Products journal, 40(5): 21-36.
7
-Casy, i.j., 1987. Changes in wood flake properties in relation to heat, moisture and pressure during flake board manufacture. M.Sc. thesis. Virginia State University, Blacksburg, Virginia. pp. 162.
8
-Dick, G., 2009. Wafer board and oriented strand board: The history and manufacturing practices. Technical Report 131 of Wood-Based Composites Center.
9
-DIN EN 300, 1997 E. Oriented Strand Board (OSB): Definitions, classification and specifications. English version of DIN EN 300.
10
-Doosthoseini, K., 2007. Wood Composite Materials Manufacturing, Applications. University of Tehran, Iran. 705p.
11
-Doosthosseini. K. and Rowshani, A., 1997. Investigation the possibility of using Haloxylon sp. In particleboard manufacturing industry. Iranian Journal Of Natural Resources, 49: 87-96.
12
-Edalat, H.R., Faezipour, M.M., Doosthoseini, K., Tabarsa, T. and Mirshokraie, S.A., 2014. Evaluation of Penetration Effect of Phenol Formaldehyde Rrsin on Internal Bonding and Tensile Strength Parallel to Surface of Oriented Strand Board. Journal of Wood and Forest Science and Technology, 21(1):149-163.
13
-EN 310:1993. Wood-based panels; determination of modulus of elasticity in bending and of bending strength.
14
-EN 317:1993. Particleboards and fibreboards; determination of swelling in thickness after immersion in water.
15
-EN 319:1993. Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board.
16
-EN 326-1:1994.Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results.
17
-Eckenwalder, J.E. 1996. Systematics and evolution of Populus: 7–32. In: Stettler, R. F., Bradshaw, H. D., Jr., Heilman, P.E. and Hinckley T.M., [Eds.], Biology of Populus and Its Implications for Management and Conservation. NRC Research Press, National Research Council of Canada, Ottawa, Ontario, Canada.
18
-FAO Reaport, Global Forest Resources Assessment Country Reports, 2015, FAO, http://www.fao.org/documents/card/en/c/74c6dc1c-f7b7-4030-97a0-6920fdbc8c20/.
19
-Faraji, F., 1993. Investigation of PF Resin Polymerization and comparison with UF Resin Polymerization in particleboard manufacturing. M.Sc. thesis, Natural Resources Faculty, Tehran University, 215p. (in Persian).
20
-Ghasemi, R.A. and Modir-Rahmati, A.R. 2004. Investigation on wood production of different poplar clones (wide crown clones) in Karaj area. Iranian Journal of Forest and Poplar Research,12(2): 221-249.
21
-Geimer, R.l., 1976. Flake alignment in particleboard as affected by machine variables and particle geometry, USDA Forest Service. Research Paper FPL, 275:1-16.
22
-Gunduz, G., Yapici, F., Ozcifci, A. and Kalaycioglu. H., 2011. The Effects of Adhesive Ratio and Pressure Time on Some Properties of Oriented Strand Board; Bio Resources, 6(2): 2118-2124.
23
-Guse, L.M., 1995. Engineer Wood Products: The Future Is Bright ,Forest Product Journal, 45 (7/8): 17-24.
24
-Heebink, B.G.,1972. Irreversible Dimensional changes in panel materials. Forest Product Journal.22(5):44-48.
25
-Heebink, B.G., 1972. Irreversible dimensional changes in panel materials. Forest Prod. J. 22:5. 44-48.
26
-Hrazsky, J. and Kral, P., 2011. Optimization of a Pressing Diagram in OSB Pressing, Dravna Industrija, 62 (1): 27-35.
27
-Iswanto, A.H., Azhar, I., Supriyanto, M. and Susilowati, A., 2014. Effect of resin type, pressing temperature and time on particleboard properties made from sorghum bagasse. Agriculture, Forestry and Fisheries, 3(2): 62-66.
28
-Jahanilomer, Z. and Farrokhpayam, S.R., 2015. Vertical density profile, a keyparameter for evaluating of
29
particleboard quality. Journal of Wood and Forest Science and Technology, 21(4):1-21.
30
-Jime´nez L, Rodriguez A, Ferrer JL, Pe´rez A, Angulo V (2005( Paulownia, a fast growing plant, as a raw material
31
for paper manufacturing. Afinidad 62:100–105.
32
-Kargarfard, A., 2003. Investigation on The Effect of Production Variables on Heat Transfer Mechanism During
33
Particleboard Pressing. ph.D. thesis, , Department of Wood and Paper Science, Tehran Science and Research Branch,
34
Islamic Azad University, Tehran.
35
-Kargarfard, A., 2011.The Effect of Resin Gradient and Press Time on the Physical and Mechanical Properties of
36
Particleboard Produced from Citrus Tree Wood. Journal of wood and forest science and technology, 18(2): 25-40
37
-Kehr, E. and Schoelzel, S., 1966. The investigation of pressing conditions in the manufacture of particleboard.
38
USDA Translate.FPL-678.
39
-Kelly, S. S., Rials, T.G. and Glaser, W. G., 1987. Relaxation behavior of the amorphous components of wood.
40
Journal of Materials Science, 22(2): 617-624.
41
-Khial, B., Sadraie, N.S., 1984. Poplar pests investigation in Iran, Research Institute of Forests and Rangelands,
42
Tehran, Iran, 107pp (In Persian).
43
-Kord. B., Roohani, m. and KORD, b.R., 2015. Characterization and Utilization Of Reed Stem ASA lignocellulosic Resource for Particleboard Production. Maderas. Ciencia y tecnología, 17(3): 517 – 524.
44
-Kuhne,G., and Belimow,F., 1978. Ein Beitrag zur Analyse des Heisspressvorgangs dreischichtiger Mobelplatten II.Holzindustrie (2):50-52.
45
-Kuhne, G; Belimow, F., 1978. Analysis of the hot press process of furniture chip boards in 3 layers II. Holzindustrie 31 (2) 50-52.
46
-Kurt, R., and Cavus, V. 2011. Manufacturing of parallel strand lumber (PSL) from rotary peeled ybrid poplar I- 214 veneers with phenol formaldehyde adhesives. Wood Research, 56(1), 137-144.
47
-Lam, F., 2001; Modern structural wood productes, Prog. Strauct. Eng. Mat. 3(3), 238-245.
48
-Latibari, A.J., Hossienzadeh, A.B. and Tabarsa, T., 1996. Investigation on The Effect of UF Resin Polymerization Variables on Strength of UF Bonded Hornbeam Particleboard. Wood and Paper Research 1, Technical Publication 148:1-48.
49
-Liu, J.Y and McNatt, J.D., 1991; Thickness swelling and density variation in aspen flake boards,Wood Science and Technology, 25(1): 73-82.
50
-Mackes, K.H., and Lynch, D. L., 2001, The Effect of Aspen Wood Characteristics and Properties on Utilization, USDA, Forest Service Proceedings RMRS-P-18.
51
-Maloney, T.M, 1993, Modern Particle Board and Dry Process Fiberboard Manufacturing, San Francisco: MillerFreeman, Madison, WI: Forest Products Society.
52
-McNatt, J.D.; Bach, L.; Wellwood, R.W., 1992. Contribution of flake alignment to performance of strand board. Forest products Journal, Madison.v.42, n. (3), p.45-50.
53
-Mendes, L.M., Iwakiri, S., Matos, J.L.M., JR, S.K., and Saldanha, L.K., jan./jul.2003. Effects of panels Density, Composition and Resin content on OSB panels properties, Floresta e Ambiente,.10(1):P.01-17.
54
-Moslemi, A.A., 1974. Particleboards. Volume I-materials and volume II technology. Southern Illinois University Press, IL 62902-3697, Carbondale, USA.
55
-Nazerian,M., Beyki, Z., Mohebbi-Gargarii, R. and Kool, F., 2016. The effect of some technological production
56
variables on mechanical and physical properties of particleboard manufactured from cotton ("Gossypium hirsutum") stalks. Maderas: Ciencia y tecnología, 18(1): 167-178.
57
-Nemli, G., 2002. Factors Affecting The Production of E1 Type Particleboard. Turk Journal Agriculture Forestry, 26:31-36.
58
-Ramtin, A., Dadkhah Tehrani, B. and Doosthoseini, K., 2008. Investigation of press temperature and press time on physical and mechanical properties of OSB board made of Aspen. Iranian Journal of Wood and Paper Science Research, 23(1): 74-82.
59
-Rebollar, M., Perez, R. and Vidal, R., 2007. Comparison between oriented strand boards and other wood-based panels for the manufacture of furniture. Elsevier, Materials and Design, 28: 882-888.
60
-Reddy, N. and Yang, Y., 2009, Properties and potential applications of natural cellulose fibers from the bark of cotton stalks. BioResour Technology, 100(14):3563–3569.
61
-Roffael, E. and Dix, B., 1988. Zur Bedeutung von schnellwüchsigen Baumarten als Rohmaterial für die Werkstoff, Holzwerkstoffherstellung unter besonderer Berücksichtigung von Pappelholz für Spanplatten. Holz Roh, 46(7): 245-252.
62
-Salari, A., Tabarsa, T., Khazaeian, A. and Saraeian, A., 2012. Effect of nanoclay on some applied properties of Sci., oriented strand board (OSB) made from underutilized low quality paulownia (Paulownia fortunei) wood. J Wood, 58: 513–524.
63
-Stanton, B.J., Eaton, J., Johnson, D., Rice, B., Schuette, B. and Moser, B., 2002. Hybrid poplar in the pacific northwest, the effects of market driven management. Journal of Forestry 100(4): 28-33.
64
-Stefka, V., 1999. Particleboard pressing process and transfer phenomena. TU Zvolen, 61p.
65
-Suzuki , s., and Takeda, k., 2000. Production and properties of Japanese oriented strand board. I: Effect of strand length and orientation on strength properties of Sugi oriented strand board, journal Wood science, 46,289-295
66
-Tabarsa, T.; Chui, H. 2000. Wood behavior in transverse compression. Part1: apparatus and preliminary results. WoodandFiberScience 32(2):144-152.
67
-Thoemen, H., Irle, M. and Sernek, M. 2010. Wood-Based Panels. An Introduction for Specialists,Published by Brunel University Press, London, England.
68
-UN., 2011, Forest products annual market review, 2010-2011, United Nations Food and Agriculture Organization.
69
-Valentina, D., Ciobanu, O., Zeleniuc A. and Dumitrascu E., 2014The Influence of Speed and Press Factor on Oriented Strand Board Performance in Continuous Press. BioResources9 (4), 6805-6816
70
-Winandy, J.E and Kamke, F.A., 2004. Fundamentals of composite processing. Proceeding of a Workshop. Gen.Technical Report, FPL-GTR-149.Madison, WI: USDA. Forest Service. FPL. 118 P.
71
-Yin, S., 1987. A study of the technology and properties of oriented bamboo strand board. Journal of Nanjing Forestry University, 3: 65-72.
72
-Youngquist, J.A., 1999. Wood-based composites and panel products, Wood handbook: wood as an engineering material.
73
-Zhou, D., 1990. A study of oriented structural board made from hybrid poplar Physical and mechanical properties of OSB. Holz als Roh- und Werkstoff, 48: 293-296.
74
-Zoralioglu, T., 2003. Some statistical information concerning poplar wood production in Turkey, First International Conference on The Future of Poplar Culture, Italy.
75
ORIGINAL_ARTICLE
مقایسه عملکرد نشاسته کاتیونی ذرت و تاپیوکا در بهبود ویژگی های مقاومتی کاغذ حاصل از کارتن های کنگره ای کهنه
هدف از این تحقیق بررسی تاثیر نشاسته کاتیونی ذرت و تاپیوکا بر ویژگیهای مقاومتی کاغذ ساخته شده از کارتنهای کنگرهای کهنه میباشد. در اثر بازیافت کاغذ ویژگیهای آن افت کرده و بر کیفیت مورد نظر کاغذ تاثیر منفی میگذارد. به کارگیری تیمارهای مختلف میتواند در ارتقاء این الیاف موثر واقع شود. از تیمارهای موثر در ارتقاء الیاف بازیافتی، استفاده از نشاسته کاتیونی میباشد. در این بررسی از نشاسته کاتیونی ذرت و تاپیوکا هر یک در 3 سطح 5/0، 1 و 5/1 درصد استفاده و با نمونه های شاهد( فاقد نشاسته کاتیونی) مقایسه شد. کاغذ دستساز با جرم پایه 120 گرم بر مترمربع ساخته و ویژگیهای مقاومتی آن اندازهگیری شد. همچنین میزان جذب نشاستهها بر روی خمیرکاغذ با استفاده از روش فنول- اسید محاسبه گردید. نتایج مشخص نمود که مصرف 5/1 درصد نشاسته تاپیوکا و 1 درصد ذرت در اغلب موارد تاثیر بهینه را در افزایش مقاومت کاغذهای حاصله داشته است. همچنین در مقایسه دو نشاسته، تاپیوکا عملکرد بهتری داشته است.
https://ijwpr.areeo.ac.ir/article_106289_cd2edb507834a783d2d92c7bf6b21b3a.pdf
2016-12-21
662
670
10.22092/ijwpr.2016.106289
نشاسته کاتیونی
بازیافت
OCC
تاپیوکا
ذرت
نورالدین
نظرنژاد
nazarnezhad91@gmail.com
1
دانشیار، عضو هیئتعلمی گروه مهندسی علوم و صنایع چوب و کاغذ، دانشگاه علوم کشاورزی و منابع طبیعی ساری
LEAD_AUTHOR
سید نجمه
موسوی
n.nazarnezhad@yahoo.com
2
دانشآموخته کارشناسی ارشد، صنایع خمیر و کاغذ، دانشگاه علوم کشاورزی و منابع طبیعی ساری
AUTHOR
سید مجید
ذبیح زاده
majid_zabihzadeh@yahoo.com
3
دانشیار، عضو هیئتعلمی گروه مهندسی علوم و صنایع چوب و کاغذ، دانشگاه علوم کشاورزی و منابع طبیعی ساری
AUTHOR
-Anonymous, j., 2001. A New Developments in Molded Pulp Processes and Packaging. IMPEPA Report. Chicago.Illinois USA, 20-24 pp.
1
-Chakravarty, S., 2006. Development of creep tester and to study the effect of cationic starch on tensile creep behavior of softwood handsheets at low and high relative humidity. A thesis Submitted to the Faculty of Miami University In partial fulfillment of the requirements for the degree of Master of Science, 60pp.
2
-Ekhtera, M., H. Rezayati,P., Ramezani, O. and Azadfallah, M., 2008. Effect of polyalumimium chloride, starch, alum, and rosin on the rosin sizing, strength, and microscopic appearance of paper prepared from old corrugated container (occ) pulp. Bioresources technology, 4(2): 291-318 pp.
3
-Hamzeh, y., 2009. Principales of papermaking chemistry. Tehran university press, 424 p. (in Persian).
4
-Hubbe, M.A., 2006. Bonding between cellulosic fibers in the absence and presence of dry-strength OD dry-strength agents-a review. BioResources, 1(2): 281-318 pp.
5
-Hubbe, M.A., 2006. Bonding between cellulosic fibers. Bioresources Technology, 1(2): 281-318 pp.
6
-Hubbe, M.A., 2004. Innovation in starch technology for wet end scientific and technical advances in wet end chemistry. PIRA International Industry Briefing Note.Miami.
7
Jalali, T.H., 2009. Determining the best combination of dry strength additives on mechanical properties of recycled occ. -M.Sc thesis, faculty of Natural Resources of Tehran University, 115p. (In Persian).
8
-Jalali, T.H., Latibari.J. A., Mirshokraei,A. and Faezipur.M.M., 2010. Study the effect of cationic starch and guar gum on the strength properties of recycled occ. Journal of wood and paper, 46: 70-73.
9
-Kearney R. and Maurer H., W., 1997. Starch and Starch Product in Paper Coating, Tappi Press, and Appendix 3: Starch in paper-Enzymatic Test Method, ISBN-10: 0898520509.
10
-Khosravani. A., Latibari.J.A., Tajvidi.M., Mirshokraei, A. and Mohammadnezhad, M., 2010. Study the effect of cationic starch on the performance of nano silica, anionic starch in fine paper. Journal of forest and wood product, Tehran university press, 63 (1): 6 p.
11
-Khosravani, A., 2009. Investigation on Utilizing Cationic Starch –anionic Nanosilica system for application of more filler in fine paper. Ph.D. thesis, Tehran University, 74 pp.
12
-Lee, J., lee, Y.H.L. and Youn, H.Y., 2005. Adsorbtion analysis of cationic guar gum on fibers in closed papermaking system. Tappi Journal, 4(10): 323-324 pp.
13
-Malton, S., Kuys, K., Parker, I.and Vanderhoke, N., 1998. Adsorption of cationic starch on eucaltptus pulp fibers and fines. Appita journal, 51(4): 292-298 pp.
14
-Mirshokraei, A., 2002. Guide to waste paper. Aeezh press, 140 p. (in Persian).
15
Szwaresztajan, E., 1996. Investigation on changes in the properties of Recycled pulp Fractionation. Cellulose Chemistry and Technology.
16
-Tschirner, U., Barsness, J. and Keeler, T., 2007. Recycling of chemical pulp from wheat and corn stover, Bioresurses, 2(4): 356-543 pp.
17
-Ziaee, M., 1999. Effect of non-fibrous additives on properties of recycled paper pulping and paper packaging from mixed waste. M.Sc. thesis, Faculty of marine and natural resources, 98 p.
18
ORIGINAL_ARTICLE
رفتار گسیختگی خزش ماده مرکب الیاف باگاس- پلیپروپیلن
در این مطالعه رفتار گسیختگی خزش ماده مرکب الیاف باگاس- پلیپروپیلن مورد بررسی قرار گرفت. برای توصیف اثر دوام بار بر روی ماده مرکب مورد مطالعه، دو مدل تخریب تجمعی (EDRM و Wood)، و یک مدل شکست بر پایه انرژی (R-W)، مورد استفاده قرار گرفتهاند. نتایج نشان داد که مدل EDRM در سطح تنش بسیار بالا، زمان شکست را کمتر از مقدار استاتیکی و مدل Wood، زمان شکست را بیشتر از مقدار حاصل از آزمون استاتیک برآورد میکند. علت این امر به تفاوت در نحوه اعمال بار در بارگذاری استاتیکی و بارگذاری خزشی نسبت داده شد. نتایج نشان داد که هر سه مدل قادر بودند رفتار گسیختگی خزش ماده مرکب مورد مطالعه را به خوبی توصیف کنند و در این بین مدل Wood از لحاظ آماری برازش بهتری را بر روی دادههای تجربی نشان داده است. بر اساس یافتههای تحقیق حاضر میتوان نتیجه گرفت که مدل R-W در پیش بینی زمان شکست، نسبت به دو مدل دیگر محافظه-کارانهتر عمل میکند و علت این امر را میتوان به تفاوت در معیار شکست در مدلهای بر پایه انرژی یا معیار شکست در مدلهای تخریب تجمعی نسبت داد. همچنین نتایج نشان داد که با افزایش سطح تنش مرحله دوم خزش کوتاهتر میشود و در سطوح تنش بالا، مرحله سوم خزش غالب است.
https://ijwpr.areeo.ac.ir/article_106764_4b655b8407f0fad19f25cee785b5fabf.pdf
2016-12-21
671
683
10.22092/ijwpr.2016.106764
ماده مرکب
گسیختگی خزش
مراحل سهگانه خزش
مدلهای تخریب تجمعی
مدلهای شکست بر پایه انرژی
فروغ
دستوریان
fdastoorian@ut.ac.ir
1
استادیار، صنایع چوب و کاغذ، دانشگاه علوم کشاورزی و منابع طبیعی ساری
LEAD_AUTHOR
محمد
لایقی
mlayeghi@ut.ac.ir
2
استادیار، صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران
AUTHOR
قنبر
ابراهیمی
ba_ebrahimi@yahoo.com
3
استاد، صنایع چوب و کاغذ، دانشکده منابع طبیعی-دانشگاه تهران
AUTHOR
مهدی
تجویدی
mehdi.tajvidi@maine.edu
4
هیات علمی دانشکده منابع جنگلی-دانشگاه مین آمریکا
AUTHOR
سید مجید
ذبیح زاده
majid_zabihzadeh@yahoo.com
5
هیات علمی دانشکده منابع طبیعی- دانشگاه علوم کشاورزی و منابع طبیعی ساری
AUTHOR
-Adcock, T., Wolcott, M.P. and Hermanson, J.C., 2001. The influence of wood plastic composite formulation: Studies on mechanical and physical properties. Project End Report: Engineered Wood Composites for Navy Waterfronts. Task 1D-1 Evaluate Extruded Materials. Washington State University. Pullman, Washington.
1
-Alvarez-Valencia, D., Dagher H. j., Davids, W.G. and Lopez-Anido, R. A., 2010. Structural performance of wood plastic composite sheet piling, Journal of Materials in Civil Engineering, 22(12): 1235-1243.
2
-ASTM D618-00, Standard Practice for Conditioning Plastics for Testing, American society for testing materials.
3
-ASTM D6815, Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products.
4
-Brandt, C.W. and Fridley, K.J., 2003. Load-Duration Behavior of Wood-Plastic Composites. Journal of Materials in Civil Engineering, 15(6):524-536.
5
-Cai, Zh. and Ross R.J., 2011. Mechanical properties of wood-based composite materials. In: Wood handbook, Forest Products Laboratory, pp.12.1-12.12.
6
-Chang, F.C., Lam, F. and Kadla, J.F., 2013. Application of time–temperature–stress superposition on creep of wood–plastic composites, Mechanics of time dependent materials, 17: 427-435.
7
-Clemons, C., 2002. Wood-plastic composites in the United States; The interfacing of two industries. Forest Product Journal, 52 (6): 10-18.
8
-Dolan, J.D., DuChateau, K.A., O'Dell, J., Wolcott, M.P. and Johnson, S., 2010. Effect of form change in sill plates on shear wall performance, 11th World Conference on Timber Engineering, WCTE 2010. 2: 1160-1168.
9
-Dastoorian, F., Tajvidi, M. and Ebrahimi, G., 2010. Evaluation of time dependent behavior of a wood flour/high density polyethylene composites, Journal of Reinforced Plastics and Composites, 29 (1):132-143.
10
-Fridley, K. J., 1992. Creep rupture behavior of wood. Department of Forestry and Natural Resources Agricultural Experiment Station, Bulletin No. 637. Purdue University.
11
-Gerhards, C.C. and Link, C.L., 1987. A cumulative damage model to predict load duration characteristics of lumber. Wood and Fiber Science. 19(2): 147-164
12
-Hamel, S.E., Bechle, N.J., Hermanson J.C. and Cramer, S. M., 2010. Characterizing macroscopic creep behavior of wood plastic composites in tension and compression, in 10th international conference on wood & biofiber plastic composites and cellulose nanocomposites symposium: May 2009, Madison, WI: Forest Product society, 289P.
13
-Kazemi Najafi, S., Nikray, S.J. and Ebrahimi, GH., 2012. A comparison study on creep behavior of wood–plastic composite, solid wood, and polypropylene, Journal of Composite Materials, 46(7): 801-808.
14
-Kazemi Najafi, S., Sharifnia, H. and Tajvidi, M., 2008. Effects of water absorption on creep behavior of wood-plastic composites. Journal of Composite Materials, 42(10): 993-1002.
15
-Najafi, A. and Najafi, S.K., 2009. Effect of load levels and plastic type on creep behavior of wood sawdust/HDPE composites. Journal of Reinforced Plastics and Composites, 28(21): 2645-2653.
16
-Odell, J., 2008. Wood plastic composite sill plate for continuous anchorage of shear walls in light frame wood structures. MSc thesis, Washington State University.
17
-Pendleton, D., Hofford, T.A., Adcock, T., Woodward, B. and Wolcott, M.P., 2002. Durability of an Extruded HDPE/Wood Composite. Forest Products Journal, 52(6), 21-27.
18
-Pooler, D.J. and Smith L.V., 2004. Non-linear Viscoelstic response of a wood plastic composite, including temperature effects. Journal of Thermoplastic Composite Materials, 17:427-439.
19
-Rangaraj, Sudarshan V., and Smith Lloyd, V., 1999. The Nonlinear viscoelastic response of a wood-thermoplastic composite, Mechanics of Time Dependent Materials, 3:125-139.
20
-Reiner, M. and Weissenberg, K.A., 1939. Thermodynamic theory of the strength of the materials, Rheological leaflet 10(1):12–20.
21
-Rosowsky, D.V. and Fridley, K.J., 1995. Directions for duration-of-load research. Forest Products Journal, 45(3), 85-88.
22
-Sain, M.M., Balatinecz, J. and Law, S., 2000. Creep fatigue in engineered wood fiber and plastic compositions. Journal of Applied Polymer Science, 77(2): 260-268.
23
-Wood, L.W., 1951. Relation of strength of wood to duration-of-load. Report No. 1916, U.S.D.A Forest Service, Forest Products Laboratory, Madison, WI.
24
-Xu, B., Simonsen, J. and Rochefort, W.E., 2001. Creep resistance of wood-filled polystyrene/high-density polyethylene blends. Journal of Applied Polymer Science, 79(3):418-425.
25
ORIGINAL_ARTICLE
تاثیر نانو ولاستونیت بر خواص فیزیکی و مکانیکی چوب پلاستیک ساخته شده با ساقه آفتابگردان و چوب توسکا
در این پژوهش تاثیر نانو ولاستونیت بر خواص فیزیکی و مکانیکی چندسازه چوب پلاستیک ساخته شده با پودر پسماند ساقه آفتابگردان و چوب توسکا مورد بررسی قرار گرفت. پودر ساقه آفتابگردان مورد استفاده نسبت به جرم خشک پودرچوب در پنج سطح صفر، 25، 50، 75 و 100 درصد و نانو ولاستونیت بصورت پودر در سه سطح صفر، 3 و 5 درصد به عنوان عوامل متغیر این تحقیق در نظر گرفته شدند. خواص فیزیکی و مکانیکی چندسازه شامل مقاومت به پیچ عمود بر سطح، مقاومت خمشی، مدول الاستیسیته، جذب آب و واکشیدگی ضخامت پس از 2 و 24 ساعت غوطهوری در آب مطابق با استاندارد EN DIN-اندازه گیری گردید. به منظور بررسی فصل مشترک چوب و پلیمر و همچنین نحوه پراکنش و توزیع نانو ذرات ولاستونیت در ماتریس پلیمری عکسهای میکروسکوپی تهیه گردید. نتایج نشان داد که با افزایش نسبت اختلاط پودر ساقه آفتابگردان به پودر چوب تا سطح 25 درصد سبب افزایش مقاومت به پیچ عمود بر سطح و تا سطح 50 درصد باعث افزایش مقاومت خمشی و مدول الاستیسیته چندسازه چوب پلاستیک گردید. استفاده از پودر ساقه آفتابگردان در مخلوط با پودر چوب توسکا سبب افزایش میزان جذب آب و واکشیدگی ضخامت 2 و 24 ساعت غوطه وری در آب شد. استفاده از نانو ولاستونیت تا سطح 5 درصد نسبت به جرم کل تخته سبب بهبود کلیه خواص فیزیکی و مکانیکی چند سازه چوب پلاستیک گردید.
https://ijwpr.areeo.ac.ir/article_107021_3162347a13002ddfe3ec8f6b4e7116c4.pdf
2016-12-21
684
694
10.22092/ijwpr.2016.107021
واژههای کلیدی: ساقه آفتابگردان
چندسازه چوب پلاستیک
نانو ولاستونیت
خواص فیزیکی و مکانیکی
حسین
رنگ آور
hrangavar@yahoo.com
1
دانشیار، گروه صنایع چوب، دانشکده مهندسی عمران، دانشگاه تربیت دبیر شهید رجائی، تهران
LEAD_AUTHOR
امیر
نوربخش
nourbakhsh_amir@yahoo.com
2
دانشیار، بخش تحقیقات علوم چوب و فراوردههای آن، مؤسسه تحقیقات جنگلها و مراتع کشور، سازمان تحقیقات، آموزش و ترویج کشاورزی، تهران، ایران
AUTHOR
سعید
حاجی حتملو
hajihatamloo@yahoo.com
3
دانشجوی کارشناسی ارشد، گروه صنایع چوب، دانشکده مهندسی عمران، دانشگاه تربیت دبیر شهید رجائی، تهران
AUTHOR
-Azad, F., Faezi Pour, M. and Tajvidi, M., 2011. Polypropylene coupling factor coupled with maleic anhydride effect on the physical and mechanical characteristics of composite flour Polypropylene protocol. Research Journal of Wood and Paper Science Research, 24 (2), 232-243.
1
-Deshmane, D., Yuan, Q. and Misra, R.D. K., 2007. High strength-toughness combination of melt intercalated Nano-clay-reinforced thermoplastic olefins. Journal of Material Science Engineering, 460-461(1-2): 277-287.
2
-Gorjani, F. and Omidvar, A., 2005. Check the manufacturing process and mechanical properties of recycled high density polyethylene composite wheat-straw. Research and development in natural resources, 72, 84-88.
3
-Han, G., Lei, Y., Wu, Q., Kojima, Y. and Suzuki, S., 2008. Bamboo-fiber filled high density polyethylene composites; effect of coupling treatment and Nano-clay. Journal of Polymer Environment, 16(2): 123-130.
4
-Han-seung, Y., Hyun-joong, K., Hee-junpark, B. and Teak-Sung, H., 2006. Water absorption behavior and mechanical properties of lignocellulosic filler polyolefin. bio composites. Composite Structures, 72(4), 429-437.
5
-Karimi, A.N., Rohani, M., Parsapzhuh, D. and Ebrahimi, Q., 2004. The use of lignocellulosic fibers (bagasse and kenaf) in manufacturing polypropylene fiber composite. Iranian Journal of Natural Resources, 57 (3), 491-506.
6
-Khosravian, B., 2009. Evaluation of physical properties, mechanical, thermal and morphological hybrid composites and nano-hybrid composites, polypropylene, wood flour, wollastonite, M.Sc. thesis, Department of Natural Resources, Tehran University: 103 p.
7
-Lu, J.Z., Wu, Q., and Negulescu, I., 2005. Wood-fiber/high-density-polyethylene composites; Coupling Agent Performance. Journal of Applied Polymer Science, 96(1): 93–102.
8
-Nourbakhsh, A. and Ashori, A., 2010. Wood plastic composite analysis of mechanical properties. Journal of Bioresource Technology, 101: 2525-2528.
9
-Panthapulakkal, S. and Sain, M., 2006. Injection molded wheat straw and corn stem filled polypropylene composites. Journal of Polymers and the Environ, 14(3): 265- 272.
10
-Raeisi nafche, H., Abduos, M., Kazemi, S. and Mohbi, R., 2015.The impact of nano-clay and polypropylene oxide in the solution phase compatibilizer on physical and mechanical properties of wood fiber-polypropylene composites. Forestry and wood products. Iranian Journal of Natural Resources, 68(4), 843-858.
11
-Rangavar, H., Gholipor, T. and Kargarfard, A., 2011. The possibility of using waste wood plastic composite canola. Wood and Forest Sciences and Technology, 28 (4), 641-628.
12
-Rangavar, H., Oromiehie, A., Safarpour, A., and Gholipour, T., 2013. Study of utilizing recycled polyvinyl choloride (PVC) in wood plastic composite. Iranian Journal of Wood and Paper Science Research. 28: 35-47.
13
-Razavi-Nouri, M., Jafarzadeh, F., Oromiehie, A. and Langroudi, A.E., 2006. Mechanical properties and water absorption behaviour of chopped rice husk filled polypropylene composites. Iranian Polymer Journal, No 9: 757-766.
14
-Yang, S., Wolcott, M., Kim, H. and Kim, S., 2007. Effect of different compatibilizing agents on the mechanical properties of lignocellulosic material filled polyethylene bio-composites. Composite Structures, 79(4): 369–375.
15
-Zhao, Y., Wang, K., Zhu, F., Xue, P. and Jia, M., 2006. Properties of poly vinyl chloride/wood flour/ montmorillonite composites: Effects of coupling agents and layered silicate. Journal of Polymer Degradation and Stability, 91(12): 2874-2883.
16
ORIGINAL_ARTICLE
تهیه نانو سلولز از جلبک رشته ای کلادوفورا و استفاده از آن جهت بهبود ویژگی های مقاومتی خمیر CMP
امروزه جلبکها از نظر بوم سامانههای دریایی به عنوان تولیدکنندگان و اولین زنجیره دریافت انرژی از خورشید محسوب میشوند. به این صورت تضمین کنندهی انرژی بسیاری از آبزیان برای زندگی هستند. در تقسیمات جهانی گیاهی، جلبکها 1800 جنس و 21000 گونه دارند. جلبکها بهدلیل حضورشان در هوا تا آبهای زیرزمینی، عرصه وسیعتری را در مقایسه با سایر رستنیها به خود اختصاص میدهند. بر اساس مطالعات انجام شده، تنوع زیستی جلبکها در ایران بیش از 7000 گونه برآورد میگردد. جلبکها دارای مصارف بسیار زیادی از جمله درصنایع غذایی ،تهیه ی کود ، مصارف دارویی و غیره میباشد. در این تحقیق از نانوسلولز جلبک سبز کلادوفورا جهت بهبود مقاومتهای خمیر CMP استفاده شده است. جهت انجام این کار از جلبک مذکور با استفاده از فرآیند سودا و سپس رنگبری سلولز خالص تهیه شد..سپس سلولز حاصله با روش التراسونیک به نانوسلولز تبدیل شد. نانوسلولز جلبک کلادوفورا در نسبت های 2 ، 5 و 8 درصد با خمیرCMP مورد اختلاط قرار گرفت. در نهایت کاغذ دستساز تهیه و ویژگی های مقاومتی آن با خمیر خالص CMP حاصل از چوب پهنبرگان مورد بررسی و مقایسه قرار گرفت. نتایج نشان داد که تیمار 8 درصد بیشترین دانسیته، مقاومت به کشش، مقاومت به ترکیدن و تیمار شاهد کمترین مقدار را داشته است. همچنین بیشترین مقاومت به پارهشدن مربوط به تیمار شاهد بوده در حالیکه کمترین مقاومت به پارهشدن مربوط به تیمار 8 درصد بوده است.
https://ijwpr.areeo.ac.ir/article_106290_01aa2ad1074ae258013ad0ffb31bcfa2.pdf
2016-12-21
695
702
10.22092/ijwpr.2016.106290
تیمار فراصوتی
جلبک سبز کلادوفورا
خواص مقاومتی
کاغذ CMP
نانوسلولز
فاطمه
اسدی
asadi_fatemeh66@yahoo.com
1
کارشناس ارشد خمیروکاغذ، دانشگاه علوم کشاورزی و منابع طبیعی، ساری
LEAD_AUTHOR
نورالدین
نظرنژاد
nazarnezhad91@gmail.com
2
دانشیار گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه علوم کشاورزی و منابع طبیعی، ساری
AUTHOR
قاسم
اسدپور اتویی
asadpur2002@yahoo.com
3
استادیار گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه علوم کشاورزی و منابع طبیعی، ساری
AUTHOR
-Ali, M. and Sreekrishnan, T.R., 2001.Aquatic toxicity from pulp and paper mill effluents: a review. Advances in Environmental. Research, 5 (2001), pp. 175–196.
1
-Almehbad, N.Y., 2004. Improving paper properties, polymer-plastic Technol. Eng. 43(3), 963-979.
2
-Bold, H. and Wynne, M., 1985. Introduction to the algae, 2nd ed., Prentice Hall Int: Englewood Cliffs, NJ.
3
-Brown, A.J., 1886. An acetic ferment which forms cellulose. Journal of Chemical Society, 49,432–439.
4
- Chen, W., Yu, H., Liu, Y., Hai, Y., Zjang, M. and Chen, P., 2011. Isolation and characterization of cellulose nanofibers from four plant cellulose fibers using a chemical-ultrasonic process, Cellulose 18:433-442.
5
-Ek, R., Gustafsson, C., Nutt, A., Iversen, T., Nystro, C.J. Mol Recog .1998. Cellulose Powder from Cladophora Sp. Algae. Journal of Molecular Recognition, 11, 263-265.
6
-Favier, V., Chanzy, H., Cavaillé, J.Y., 1995. Polymer Nanocomposites Reinforced By Cellulose Whiskers. Macromolecule (28), 6365-6367.
7
-González, I., Boufi, S., Pèlach, M.A., Alcalà, M., Vilaseca, F. and Mutjé, P.,2012. Nanofibrillated cellulose as paper additive in eucalyptus pulps. BioResources, 7(4), 5167-5180.
8
-Hubbe, M.A., Rojas, O.J., Lucia, L. and Sain, M., 2008. Cellulosic nanocomposites: A review, Bioresources 3(3), 929-980.
9
-Kouhia, M., 2013. Integration of a microalgae-utilizing biorefinery into a pulp and paper mill.
10
-Lindgren, A., 2010. Preparation of Nanofibers from Pulp Fibers. Master Thesis.collaboration with Eka Chemicals AB.
11
-Luu, W.T., Bousfield, D.W. and Kettle, J., 2011 Application of nanofibrillated cellulose as a paper surface treatment for inkjet printing. Papercon, 2222_2233.
12
-Mata,Teresa M., António, A., Martins and Nidia, S. Caetano., 2010. Microalgae for biodiesel production and other applications: A review. In: Renewable and Sustainable Energy Reviews 14.1, pp. 217–232. issn: 1364-0321. doi: 10.1016/j.rser.2009.07.020.
13
-Mihranyan, A., 2011. Cellulose from cladophorales green algae: From environmental problem to high‐tech composite materials. Journal of Applied Polymer Science, 119(4), 2449-2460.
14
-Mirshokraei, S.A., 2009. Pulp and Paper Technologists, Aeij Press, Tehran.
15
-Sheath, R.G. and Wehr, J.D., 2003. Introduction to freshwater algae. Freshwater algae of North America: ecology and classification (JD Wehr & RG Sheath, eds.). Academic Press, San Diego, 1-9.
16
-Smook, G.A., 1982. Pulp and Paper Technologists, Translated by Mirshokraei, S. A., Aeij Press, Tehran, 501 P.
17
-Tekere, M., 2010. Biology 1: Diversity of algae and plants. African Virtual university, http://www. oer. avu.org. Accessed 2011/10/15.
18
-Vuong, R., Chanzy, H., Sugiyama, J., 1992. Biol Cell .75, 264.
19
-Yousefi, H. and Mashkor, M., 2008. Cellulose Nano-crystalline, renewable and inexpensive industrial to produce nanocomposites, Nanotecnology monthly magazine, Seventh year, 131.
20
-Yousefi, H., Nishino, T., Faezipour, M., Ebrahimi, G. and Shakeri, A., 2011. Direct fabrication of nanocomposite from cellulose microfibers using ionic liquid-based nanowelding. Biomacromolecules, 12, 4080–4085.
21