ORIGINAL_ARTICLE
تأثیر افزودن نانورس بر ویژگیهای چوب پلاستیک ساخته شده از ضایعات تخته فیبر نیمهسنگین و تختهخردهچوب با پلیاتیلن و پلیپروپیلن بازیافتی
این پژوهش با هدف بررسی ویژگیهای مکانیکی، گرماسنجی وزنی و ریختشناسی چوب پلاستیک ساختهشده از ضایعات تخته-خردهچوب و تخته فیبر نیمه سنگین و دو نوع پلیمر بازیافتی (پلیاتیلن سنگین و پلیپروپیلن) با افزودن نانورس انجام شد. برای این منظور50% وزنی ضایعات دو نوع تخته مذکور، 50% وزنی پلیمر بازیافتی، 3% وزنی انیدرید مالئیک پیوند داده شده با دو نوع پلیمر و نانورس در سه سطح 3، 6 و 9 درصد وزنی، بهوسیله یک اکسترودر دو ماردون ناهمسوگرد با یکدیگر مخلوط شدند. سپس نمونههای آزمونی استاندارد با استفاده از پرس تزریقی ساخته شده و ویژگیهای مکانیکی و تخریب گرمایی آنها مورد بررسی قرار گرفت. به منظور بررسی کیفیت پراکنش ذرات نانورس در ماده زمینه پلیمری و همچنین نحوه اتصال ماده لیگنوسلولزی و پلیمری در سطح اتصال از یک میکروسکوپ الکترونی روبشی استفاده شد. نتایج نشان داد مقاومت کششی، خمشی و مدول آنها در چندسازه پلیاتیلن بازیافتی و تختهخردهچوب با افزودن مقدار نانورس تا 3 درصد وزنی افزایش یافته و سپس کاهش مییابد، در حالی که برای چوب پلاستیک ساخته شده از پلیپروپیلن بازیافتی و تختهفیبر نیمه سنگین با افزودن نانورس، روند تغییر مقاومتها و مدول آنها کاهشی بود. مقاومت به ضربه فاقدار چوب پلاستیک با افزودن نانورس همواره کاهش یافته است که حاکی از افزایش سطح شکست چندسازهها است. بررسی تصاویر میکروسکوپی نیز نشان داد که با افزودن نانورس از تعداد حفرات و فضاهای خالی کمتر شده اما پراکنش نامناسب و تجمع ذرات نانورس بهخصوص در سطح 9% محرز است. نتایج آزمون گرماسنجی وزنی حاکی از آن است که با افزایش 3% وزنی نانورس، ثبات حرارتی چوب پلاستیک نسبت به شاهد کمی بهبود یافته و مقدار ماده باقیمانده پس از احتراق نیز افزایش یافت.
https://ijwpr.areeo.ac.ir/article_120891_11fc98c3b190f197cc35e5f73f102a53.pdf
2020-04-20
1
10
10.22092/ijwpr.2020.128211.1577
ضایعات تخته
پلیمر بازیافتی
نانورس
مقاومت
گرماسنجی وزنی
میکروسکوپ روبشی
جعفر
ابراهیم پور کاسمانی
jafar_kasmani@yahoo.com
1
گروه مهندسی چوب و کاغذ، واحد سوادکوه، دانشگاه آزاد اسلامی، سوادکوه، ایران
LEAD_AUTHOR
سعید
مهدوی
mahdavi43@gmail.com
2
دانشیار، بخش تحقیقات علوم چوب و فرآورده های آن، مؤسسه تحقیقات جنگلها و مراتع کشور، سازمان تحقیقات آموزش و ترویج کشاورزی تهران، ایران
AUTHOR
-Chaharmahali, M. Kazemi-Najafi, S. and Tajvidi, M., 2007. Effect of Blending Method on the Mechanical Properties of Wood-Plastic Composites. Iranian Journal of Polymer Science and Technology, 20(4): 361-367.
1
-Ghani, M.H.A., and Ahmad, S., 2011. The comparison of water absorption analysis between counterrotating and corotating twin-screw extruders with different antioxidants content in wood plastic composites. Advances in Materials Science and Engineering, vol. 2011, Article ID 406284, 4 pages.
2
-Golebiewski, J., and Galeski, A., 2007. Thermal stability of nanoclay polypropylene composites by simultaneous DSC and TGA, Compos. Sci. Techn. 67(15-16), 3442-3447. DOI:10.1016/j.compscitech.
3
-Gozdecki, C., Wilczyński, A., Kociszewski, M. and Zajchowski, S., 2015. Properties of wood–plastic composites made of milled particleboard and polypropylene, European journal of wood and wood products, 73(1): 87-95.
4
-Gu, R., Kokta, B.V., Michalkova, D., Dimzoski, B., Fortelny, I., Slouf, M., Krulis, Z. 2010. Characteristics of wood–plastic composites reinforced with organo-nanoclays, Journal of Reinforced Plastics and Composites, 29(24): 3566-3586.
5
-Han, G. Lei, Y. Wu, Q. Kojima, Y. and Suzuki, S., 2008. Bamboo-fiber filled high density polyethylene composites; effect of coupling treatmement nanoclay. Journal of Polymer Environment, 16(2): 123-130.
6
-Incarnato, L., Scarfato, P., Acierno, D., Milana, M. R., and Feliciani, R., 2003. Influence of recycling and contamination on structure and transport properties of polypropylene, Journal of Applied Polymer Science 89(7), 1768-1778. DOI: 10.1002/app.12168
7
-Kazemi Najafi, S. Marzenaki, M. and Chaharmahali. M., 2010. Effect of Virgin and Degraded Polypropylene Blends on Properties of Wood Flour-Polypropylene Composites. Journal of Forest and Wood Products (JFWP), 63(1): 47-59.
8
-Kord, B., Ekrami, M., Roohani, M., 2014. Effect of nanoclay particles content on the mechanical properties of wood flour-polypropylene composites using dynamic mechanic thermal analysis, Iranian Journal of Wood and Paper Industries, 5(2): 15-26.
9
-Kord, B., Ravanfar, P., Ayrimis, N., 2017. Influence of organically modified nanoclay on thermal and combustion properties of bagasse reinforced HDPE nanocomposites, Journal of Polymers and the Environment, 25(4): 1198-1207.
10
-Le Baillif, M., and Oksman, K., 2009. The effect of processing on fiber dispersion, fiber length, and thermal degradation of bleached sulfite cellulose fiber polypropylene composites. Journal of Thermoplastic Composite Materials, 22(2): 115-133.
11
-Madhoushi, M., Chavooshi, A., Ashori, A., Ansell, M.P., and Shakeri, A., 2016. Properties of wood plastic composite panels made from waste sanding dusts and nanoclay, Journal of Composite Materials. 0(0): 1–9.
12
-Nazerian, M., Dalirzadeh, A., Farokhpayam, S.R., 2014. The effect of old corrugated container (OCC) powder and as urea formaldehyde adhesive filler on properties of medium density fiberboard made from bagasse and waste MDF, Iranian journal of wood and paper science research, 29(3): 452-463.
13
-Winandy, J.E. Stark, N.M. and Clemons, C.M., 2004. Considerations in recycling of wood-plastic composites. In: Proceedings of Five Global Wood and Natural Fibre Composites Symposium. April 27-28, Kassel, Germany, pp. A6-1- A6-9.
14
-Yeh, S. and Gupta, R.K., 2010. Nanoclay- Reinforced, Polypropylene-Based Wood–Plastic Composites. Polymer Engineering and Science. 50(10): 2013-2020.
15
ORIGINAL_ARTICLE
رنگبری خمیر کاغذ CMP با پروکسید هیدروژن و هیپو کلریت سدیم
دراین تحقیق اثر استفاده از پروکسیدهیدروژن و هیپوکلریت سدیم بر رنگبری خمیر کاغذ شیمیایی _ مکانیکی (CMP) بررسی شده است. بدین منظور خمیر کاغذ CMP رنگبری نشده مخلوط پهن برگان از کارخانه چوب و کاغذ مازندران تهیه شد و با پروکسیدهیدروژن و هیپوکلریت سدیم در دو سطح 3 و 4 درصد، در طی دو زمان 60 و 90 دقیقه، دمای 80 درجه سانتی گراد و درصد خشکی 8% رنگبری گردید. به این ترتیب که در هر یک از تیمارها 30 گرم خمیر کاغذ همراه با پروکسید هیدروژن، سیلیکات سدیم، DTPA، هیدروکسید سدیم و هیپوکلریت سدیم برای رنگبری آماده سازی شدند. در ادامه کاغذ دستساز آزمایشگاهی با وزن پایه 60 گرم بر مترمربع تهیه و خواص نوری و مکانیکی آنها طبق آزمون TAPPI اندازهگیری و مقایسه شد. نتایج بدست آمده از بررسی ویژگی های نوری کاغذ دستساز نشان میدهد که با افزایش زمان رنگبری و سطح مواد شیمیایی ویژگی های نوری بهبود مییابد. به طوری که بیشترین روشنی و کمترین زردی در سطح 4 درصد و 90 دقیقه در رنگبری با پروکسیدهیدروژن و بیشترین ماتی در نمونه شاهد مشاهده شد. همچنین ویژگی های مقاومتی مانند مقاومت به کشش، ترکیدن و پارگی کاغذ های رنگبری شده افزایش یافت.
https://ijwpr.areeo.ac.ir/article_120909_9c77f87df7cbcd3c8dd669510cb27acb.pdf
2020-04-20
11
21
10.22092/ijwpr.2020.128739.1587
پروکسید هیدروژن
روشنی
ماتی
هیپوکلریت سدیم
خدیجه
آرمند
kh_armand@yahoo.com
1
دانشجوی دکتری صنایع خمیر و کاغذ دانشگاه علوم کشاورزی و منابع طبیعی گرگان
LEAD_AUTHOR
علی
قاسمیان
ali.ghasemiyan1960@yahoo.com
2
دانشیار، گروه صنایع خمیر و کاغذ، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، ایران
AUTHOR
-Afra, E., 2016.Properties of Paper an Introduction. Aeeizh, Tehran, 360p.
1
-Aliabadi, M., Akbarpour, I. and Saraeian, A.R, 2010. Application of organic complex "Sulvy-x" in peroxide bleaching of hornbeam CMP pulp. Iranian Journal of Wood and Paper Science Research, 26 (1): 117-127
2
-Akbarpour, I., Resalati, H., 2010. Utilization of organic complex of glanapone stab rather than sodium silicate in peroxide bleaching of mixed hardwood CMP pulp. Iranian Journal of Wood and Paper Science Research, 26 (1):193-217.
3
-Asadpour,GH., Rajabi, F and Zabizadeh, S. M., 2018. Evaluating the properties of bleached chemi-mechanical pulp (CMP) with one and two-stage sodium hypochlorite and hydrogen peroxide. Iranian Journal of Wood and Paper Science Research, 33 (2):205-217.
4
-Fillion, M., Ager, P. and Gaudreault, R., 2006. Comparison of bleaching sequences (PF, PH and PY) for deinked mixed office waste (MOW) containing various percentages of mechanical pulp. PAPTAC 92nd Annual Meeting, Montreal, Canada, 7-9, B179-186.
5
-Ghasemi, S., Behrooz, R., 2011. The effect of consistency on the optical properties of hydrogen peroxide bleached CMP pulp. Iranian Journal of Wood and Paper Science Research, 26 (2): 398-409.
6
-Hou, Q., Sun,X., 2018. Iso-concentration hydrogen peroxide bleaching of poplar chemi-thermomechanical pulp. Journal of Bioresources and Bioproducts, 3(1): 35-39.
7
-Mehri Iraei., H, 2012. Comparative study on hydrogen peroxide and sodium dithionite use in bleaching of deinked pulp.master of science in pulp and paper technology. Faculty of pulp and paper. Gorgan univer sity of agricultural sciences and natural resources. Gorgan.61.
8
-Mirshokraei, S.A., 1989. Hand Book for Pulp & Paper Technologists. Aeeizh, Tehran, 501p.
9
-Mirshokraei, S.A., 2010. Wood Chemistry Fundamentals & Applications. Aeeizh, Tehran, 198p.
10
-Vaysi1, R., Behrooze, R. and Khaj-e-Ali, E., 2016. The effect of ECF bleaching on optical and mechanical properties of bagasse soda pulp. Iranian Journal of Wood and Paper Science Research, 31 (2):349-361.
11
-Zeinaly, F., karimi, M., shakhes, J. and mohammadi, H., 2013. Improving the bleaching process of hardwood chemi-mechanical pulp. Cellulose Chemistry and Technology, 50 (2), 285-292.
12
-Zeinaly, F., Shakeri, A.R. and Shakhes, J., 2009. Hydrogen Peroxide Bleaching of CMP Pulp Using Magnesium Hydroxide. BioResources, 4(4), 1409-1416.
13
ORIGINAL_ARTICLE
بررسی خواص کاغذ و نانوکاغذ آبگریز با استفاده از سیلان
در این مطالعه، ابتدا کاغذ و نانوکاغذ سلولزی تولید شده و سپس با استفاده از روش غوطهوری در"دودسیل تری اتوکسی سیلان" ضدآب شدند. در نتیجه تیمار سیلان، سطح آبدوست میکرو کاغذ و نانوکاغذ به سطح آبگریز تبدیل شد. آزمون عکس-برداریتصاویر FE-SEM نشان داد که نانوفیبرهای سلولزی در مقیاس نانومتری (زیر 100 نانومتر) نانوفیبرهای سلولزی را تایید کردقرار دارند. آزمون XPS نشان داد که سطح نمونههای تیمار شده حاوی سیلان است. با تیمار سیلان زاویه قطره آب به 104 درجه در نانوکاغذ و 153 درجه در کاغذ افزایش پیدا کرد لذا سطح سوپرضدآب آبگریز برای کاغذ ایجاد گردید. آزمون TGA ثابت کرد که میزان خاکستر نمونههای حاوی سیلان بیشتر از نمونههای بدون سیلان بوده و نیز تأیید شد که تیمار سیلان بر روی سطح بهصورت چند لایهای اتصال برقرار کرد. نمونههای تیمار شده با سیلان جذب آب کمتر و مقاومت مکانیکی بیشتری نسبت به نمونههای تیمار نشده نشان دادند. تیمار سیلان میکرو کاغذ و نانوکاغذ سبب ضدآب آبگریز شدن آنها شده و میتواند سبب توسعه کاربردهای آنها در فضاهای بیرونی (محیطهای مرطوب) گردد.
https://ijwpr.areeo.ac.ir/article_121036_819c471872bb257be77c840e986360a3.pdf
2020-04-20
22
32
10.22092/ijwpr.2020.127196.1563
کاغذ
نانوکاغذ
سیلان
سطح آبگریز
حسین
یوسفی
hyousefi.ir@gmail.com
1
استادیار گروه تکنولوژی و مهندسی چوب- دانشگاه علوم کشاورزی و منابع طبیعی گرگان
LEAD_AUTHOR
الیاس
افرا
elyasafra@yahoo.com
2
دانشیار تکنولوژی خمیروکاغذ، دانشگاه علوم کشاورزی و منابع طبیعی گرگان، دانشکده مهندسی چوب و کاغذ، گروه صنایع خمیروکاغذ
AUTHOR
داود
رسولی
rasouli@gau.ac.ir
3
استادیار گروه تکنولوژی و مهندسی چوب- دانشگاه علوم کشاورزی و منابع طبیعی گرگان
AUTHOR
مهدی
مشکور
mahdimashkour@gmail.com
4
استادیار گروه تکنولوژی و مهندسی چوب- دانشگاه علوم کشاورزی و منابع طبیعی گرگان
AUTHOR
-Abdelmouleh, M., Boufi, S., Belgacem, M.N., Duarte, A.P., Salah, A.B. and Gandini, A., 2004. Modification of cellulosic fibres with functionalised silanes: development of surface properties. International Journal of Adhesion and Adhesives, 24(1), 43-54.
1
-Abdelmouleh, M., Boufi, S., ben Salah, A., Belgacem, M.N. and Gandini, A., 2002. Interaction of silane coupling agents with cellulose. Langmuir, 18(8), 3203-3208.
2
-Ajayan, P.M., Schadler, L.S. and Braun, PV., 2003. Nanocomposite Science and Technology. Materials Today. 52 p.
3
-Khanjanzadeh, H., Behrooz, R., Bahramifar, N., Gindl-Altmutter, W., Bacher, M., Edler, M. and Griesser, T., 2018. Surface chemical functionalization of cellulose nanocrystals by 3-amino propyl triethoxysilane. International journal of biological macromolecules, 106, 1288-1296.
4
-Lin, Y.C., Cho, J., Tompsett, G.A., Westmoreland, P.R. & Huber, G.W., 2009. Kinetics and mechanism of cellulose pyrolysis. The Journal of Physical Chemistry C, 113(46), 20097-20107.
5
-Mohamadi, A., Tabarsa, T. and Tasooji, M., 2011. Effect of amino silane coupling agent on properties of amino plastic resin-bonded wheat straw boards. Iranian Journal of Wood and Paper Science Research, 26(1), 128-137.
6
-Taipina de Oliveira, M., Ferrarezi, M.M.F., Yoshida, I. V.P. and do Carmo Gonçalves, M., 2013. Surface modification of cotton nanocrystals with a silane agent. Cellulose, 20(1), 217-226.
7
-Thakur, M.K., Gupta, R.K. & Thakur, V.K., 2014. Surface modification of cellulose using silane coupling agent. Carbohydrate polymers, 111, 849-855.
8
-Yousefi, H., Nishino, T., Faezipour, M., Ebrahimi, G. and Shakeri, A., 2011. Direct fabrication of all -cellulose nanocomposite from cellulose microfibers using ionic liquid-based nanowelding. Biomacromolecules., 12(11):4080–5.
9
Yousefi, H., Nishino, T., Shakeri, A., Faezipour, M., Ebrahimi, G. and Kotera, M., 2013. Water-repellent all-cellulose nanocomposite using silane coupling treatment. Journal of Adhesion Science and Technology, 27(12), 1324-1334.
10
ORIGINAL_ARTICLE
مقایسه دینامیکی و استاتیکی اتصال دم چلچله و فاق و زبانه در گونه نراد
این پژوهش با هدف ارزیابی دینامیکی و استاتیکی خواص الاستیکی اتصالات ایجاد شده درچوب نراد با استفاده از اتصالات متداول در صنایع چوب از جمله اتصال دم چلچله و فاق وزبانه در گونه نراد Abies alba) ) با استفاده از دو نوع چسب پلی ونیل استات (PVA) و سیانواکریلات(CA) صورت پذیرفت . ابعاد نمونه های تحقیق بر طبق استاندارد بین المللی ISO شماره 3129 ، 24*50*360 میلی متر مورد استفاده قرار گرفت و نتایج حاصله حاکی از آنست که ،اثر نوع اتصال ، نوع چسب ، اندازه اتصال و همچنین اثر متقابل اندازه و نوع اتصال در آزمون دینامیکی و استاتیکی در سطح پنج درصد معنی دار گشتند. با افزایش طول زبانه اتصال و ارتفاع دم چلچله مدول الاستیسیته دینامیکی و استاتیکی افزایش یافت مدول الاستیسیته اتصال دم چلچله به دلیل شکل اتصال دهنده و همگن بودن بافت اتصال دهنده و همچنین عدم وجود خط چسب گسترده در این اتصال ، به مدول الاستیسیته نمونه های اتصال نیافته (شاهد) نزدیک تر می باشد و همچنین چسب سیانواکریلات به دلیل تحمل تنش بالاتر و همچنین گیرایی سریعتر این چسب سبب بهبود خواص الاستیکی نمونه ها نسبت به چسب پلی ونیل استات گردید. با توجه به نتایج آزمون تی استیودنت و آزمون همبستگی پیرسون، مدول الاستیسیته دینامیک و استاتیک برآورد شده در تحقیق دارای رابطه معنی دار در سطح پنج درصد و دارای همبستگی مثبت برآورد گردید با توجه به همبستگی نتایج آزمون استاتیکی و دینامیکی ، روش های بررسی غیرمخرب دینامیکی را می توان جایگزین مناسبی برای آزمون های مخرب استاتیکی، جهت ارزیابی و درجه بندی چوب آلات دانست .
https://ijwpr.areeo.ac.ir/article_121037_e28dadd17b13ba57b8ae0b82809b1098.pdf
2020-04-20
33
45
10.22092/ijwpr.2020.127777.1571
اتصال دم چلچله
اتصال فاق و زبانه
ارزیابی استاتیکی
ارزیابی دینامیکی
مدول الاستیسیته
امیر
ملاحسنی
drmollahassaniwood@gmail.com
1
دانشجوی دکتری گروه صنایع چوب و کاغذ ، دانشکده منابع طبیعی و محیط زیست ، دانشگاه آزاد اسلامی ،واحد علوم تحقیقات تهران ، ایران
AUTHOR
امیر هومن
حمصی
h_hemmasi@yahoo.com
2
استاد ، گروه صنایع چوب و کاغذ ، دانشکده منابع طبیعی و محیط زیست ، دانشگاه آزاد اسلامی ،واحد علوم تحقیقات تهران ، ایران
LEAD_AUTHOR
حبیب الله
خادمی اسلام
hkhademieslam@gmail.com
3
استاد ، گروه صنایع چوب و کاغذ ، دانشکده منابع طبیعی و محیط زیست ، دانشگاه آزاد اسلامی ،واحد علوم تحقیقات تهران ، ایران
AUTHOR
امیر
لشگری
amir.lashgari79@gmail.com
4
دانشیار ، گروه صنایع چوب و کاغذ ، دانشکده کشاورزی و منابع طبیعی ، دانشگاه آزاد اسلامی ،واحد کرج ، البرز ، ایران
AUTHOR
بهزاد
بازیار
behzad1351@yahoo.com
5
استادیار ، گروه صنایع چوب و کاغذ ، دانشکده منابع طبیعی و محیط زیست ، دانشگاه آزاد اسلامی ،واحد علوم تحقیقات تهران ، ایران
AUTHOR
-Anonymous. 2000, Wood Hand book.Wood as an Engineering Material Agricultural. Handbook 72. UDSA. Forest product Laboratory. Madison WI, 42-48.
1
-Altun, S., Burdurlu, E. and Kilic, M., 2010. Effect of adhesive type on the bending moment capacity of miter frame corner joints. Bioresources Journal, 5(3): 1473-1483
2
- Bodig J. and Jayne B.A., 1993. Mechanics of Wood and Wood Composites. Malabar; Krieger Publishing Company, 712P
3
-Brancheriau, L., Kouchade, C. and Bremaud, I., 2010. Internal friction measurement of tropical species by various acoustic methods. J. Wood Sci. DOI 10.1007/s10086-010-1111-8
4
- Biechele, T., Chui, YH. and Gong, M., 2010. Assessing stiffness on finger-jointed timber with different non-destructive testing techniques. In: Proc of "the Future of Quality Control for Wood Products". The final conference of COST Action E53. May 4th – 7th; Edinburgh – UK. http://cte.napier.ac.uk/e53
5
-Custodio, J., Broughton, H. and Cruz, A., 2009. A Review of Factors Influencing the Durability of Structural Bonded Timber Joint. International Journal of Adhesion&Adhesive. 29:173-185
6
-Ceraldi, C., Mormone, C. and Ermolli, E., 2001. Resistographic Inspection of Acient Timber Structures for the Evaluation of Mechanical Characteristics.Material Structure Journal.34:59-64
7
-Dalvand, M. and Moradpour, D., 2017.Analysis of stress-- strain distribution of dowel and glue line in L-type furniture joint by means of fiinite element method. Iranian Journal of Wood and Paper Industries, 8(2): 297-307.
8
-Derikvand, M., Ebrahimi, G.h. and Eckelman, C.A., 2013. Effect of shoulder thickness on bending moment capacity of mortise and loose tenon joint, Iranian Journal of Wood and Paper Industries, 28(1): 65-75.
9
- Dalvand, M., Maleki, S., Ebrahimi, G.H. and Haftkhani, A.R., 2011. Determination of stress carrying capacity of doweled corner joints in framed furniture structure constructed of Fir. Iranian Journal of Wood and Paper Industries.
10
-Derikvand, M., Smardzewski, J., Ebrahimi, G.h, Dalvand, M. and Maleki, S., 2013 .Withdrawal force capacity of mortise and loose tenon T-type furniture joints, Turkish Journal of Agriculture and Forestry, 37: 377–384.
11
-Eckelman, C., 2003. Textbook of product engineering and strength design of furniture.
12
-Eckelman, C. and Haviarova, E., 2006. Performance test of school chairs constructed with round mortise and tenon jounts. Forest products journal. 56(3): 51.
13
-Ghofrani, M. and Noori, H., 2009. Lateral holding strength of wooden dowel, screw and ready-to-assemble joints (RTA joints) constructed of Medium Density Fiberboard (MDF). Iranian Journal of Wood and Paper Science Research, 24(2): 219-231.
14
-Ghofrani, M., Kahvand, M. and Noori, H., 2015.Stress carrying capacity of Miter Frame corner joints constructed with loose tenon under tension and compression load. Iranian Journal of Wood and Paper Science Research, 30(2):308-319
15
-Horwood, R., 1999. Wood workers hand book. New Holland publisher, London, 160 p.
16
-Hossein, M, A., Roohnia, M. and Shahverdi, M., 2009. Some footprints of wood internal defects on three first mode-shapes of free vibration،16th international symposium on nondestructive testing and evaluation of wood, Beiging, China
17
-Haviarova, E., Eckelman, C. and Erdil, Y., 2001. Design and testing of environmentally friendly wood school chairs for developing countries. forest products journal, 51( 3): 58-64.
18
-Jackson, A. and Day, D., 1995. Good wood joints. Harpercollins publisher. London, 128 p.
19
-Jahan Latibari, A., Ghofrani, M. and Noori, H., 2005. Investigation the holding strength of dowel joint constructed of particleboard, Iranian Journal of Agricultural Sciences 11(1): 135-148.
20
-Kahvand, M., Omrani, P. and Ebrahimi, G.h., 2013. Determination of bending moment resistance of Ttype joints constructed with wood biscuit, Iranian Journal of Wood and Paper Industries
21
-Kurt, S., Uysal, B., Ozcan, C. and Yildirim, M.N., 2009. The effects of edge banding thickness of Uludag Fir bonded with some adhesives on withdrawal strengths of Beech dowel pins in composite materials, BioResources Journal. 4(4): 1682-1693.
22
-Kyuchukov, G., Jivkov, V., Karalivanos, A. and Jelacic, D., 1999. Fit influence on the withdrawlal strength of dowel joints from wood composite. Faculty Forestry, University of Zagreb, Zagreb. 125-130 p.
23
-Maleki, S., Faezipour M., Ebrahimi, G.h., Faezipour, M. and Layeghi, M., 2012 .Investigation on bending moment resistance of L- shaped screwed corner joints constructed of plywood members, Iranian Journal of wood and paper Science Research, 27(4): 732 -742
24
-Noll, T., 2007. Wood workers joints book. Apple press, United kingdom, 192 p.
25
-Obataya, E. and Norimoto, M., 2000. Acoustic properties of a reed (Arundo donax L.) used for the vibrating plate of a clarinet. Journal of Acoustical Society of America, 106(2): 1106-1110.
26
- Roohnia, M., Tajdini, A. and Manouchehri, N., 2011(a). Assessing wood in sounding boards considering the ratio of acoustical anisotropy. ndt&e International. 2011(d); 44:13-20
27
-Roohnia, M., Hashemi-dizaji, S.F., Brancheriau, L.A., Tajdini, A.H. and Manouchehri, N., 2011(b). Effect of soaking process in water on the acoustical quality of wood for traditional musical instruments, BioResources. 6(2): 2055-2065
28
-Wegst, U.K.G., 2006. Wood for sound. American Journal of Botany, 93(10): 1439-1448
29
-Williamson, T.G., 2002. APA Engineeres Wood Handbook, McGraw-Hill, 750. Yang, T.H., Wang S.Y., Lin C.J., Tsai M.J., 2008: Evaluation of the Mechanical Properties of Duglas- fir and Japanese Cedar Lumber and its Structural Glulam by Nondestructive Techniques. Construction and Building Materials, 22: 487-493.
30
-Zhang, J.L. and Eckelman, C.A., 1993. The bending moment resistance of single–dowel corner joints in case construction, Forest Products Journal 43(6): 19–
31
ORIGINAL_ARTICLE
بررسی مقاومت به آتش و خواص مکانیکی چوب پلیمر صنوبر تیمار شده با نانو ولاستونیت/استایرن
هدف از این پژوهش، اثر اشباع چوب صنوبر با نانو ولاستونیت و مخلوط نانو ولاستونیت و استایرن بر مقاومت به آتش و خواص مکانیکی چوب پلیمر ساخته شده میباشد. نمونههای چوب صنوبر(Populus deltoides) با نانو ولاستونیت با غلظت 4 درصد و مونومر استایرن محول در متانول با غلظت 75 درصد، با روش خلاء- فشار اشباع شدند. چهار تیمار مختلف چوب با نانو ولاستونیت، استایرن، اشباع مخلوط نانو ولاستونیت و استایرن (تیمار یک مرحلهای) به نسبت یک به یک و در نهایت، اشباع اولیه چوب به وسیله نانو ولاستونیت و سپس استایرن (تیمار دو مرحلهای) مورد بررسی قرار گرفت. در این تحقیق، خواص مقاومت به آتش و خواص مکانیکی نمونهها بررسی شد. نتایج به دست آمده نشان داد که کاهش وزن چوب در برابر آتش در تیمار دو مرحلهای (NW+St)، 38/61 درصد و در تیمار یک مرحلهای (NW/St)، 68/69 درصد نسبت به نمونه شاهد بهبود یافت. دوام شعله تیمار NW/St نیز تقریباً با تیمار NW برابر میباشد و 30 درصد نسبت به نمونه شاهد بهبود نشان داد. کاهش سطح کربونیزه شده درتیمارهای دو مرحلهای (NW+St) و یک مرحلهای (NW/St) به ترتیب برابر 53/28 و 06/29 درصد بود که کاهش قابل توجهای را نشان داد. نتایج آزمونهای مکانیکی نشان داد که در اثر حضور ماده کندسوز کننده مقاومت به فشار موازی الیاف در تیمار NW/St بیشترین مقدار را در بین سایر تیمارها داشت که افزایشی برابر 41/57 درصد را نسبت به نمونه شاهد نشان داد. مدول الاستیسیته و گسیختگی تیمار NW/St به ترتیب 77/26 و 71/35 درصد نسبت به نمونه شاهد افزایش داشتند. به علاوه، مقاومت به سختی تیمار NW/St 09/107 درصد نسبت به نمونه شاهد افزایش نشان داد. در مجموع میتوان نتیجهگیری کرد که مخلوط کردن نانو ولاستونیت با استایرن در عین حال که مقاومت چوب پلیمر را در برابر آتش افزایش داد، باعث بهبود خواص مکانیکی چوب پلیمر هم شد.
https://ijwpr.areeo.ac.ir/article_121141_da8cfb7ae05ed13c68594c490722a335.pdf
2020-04-20
46
60
10.22092/ijwpr.2020.341487.1596
نانو ولاستونیت
چوب پلیمر
مقاومت به آتش
صنوبر
خواص مکانیکی
سهیلا
ایزدیار
sizadyar@ut.ac.ir
1
گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تهران، کرج ، ایران
LEAD_AUTHOR
رقیه
حمزه زاده
r.hamzezadeh@ut.ac.ir
2
دانشگاه تهران
AUTHOR
داود
افهامی سیسی
efhami@ut.ac.ir
3
عضو هیات علمی
AUTHOR
-Deka, M. and Saikia, C., 2000. Chemical Modification of Wood with Thermosetting Resin: Effect on Dimensional Stability and Strength Property. Bioresource Technology, 73 (2): 179-181.
1
-Din, R., 1989. Wood Polymer Composites: Their Properties and Applications. Ms. Thesis. Univeristy of Wales, Bangor. 60-63.
2
-Ellis, W., 2000. Wood-Polymer Composites: Review of Processes and Properties. Molecular Crystals and Liquid Crystals, 353: 75-84.
3
-Ghorbani kookandeh, M., Kaki, R. and Omidvar, A., 2015. Effect of Styrene and Methyl Methacrylate Monomers on Mechanical Properties and Decay Resistance of Beech (Fagus Orientalis). Forest and Wood Products, 68(1):195-207.
4
-Haghighi, A., Taghiyari, H.R. and Karimi, A.N., 2013. Study on Fire-Retardant Properties of Nano-Wollastonite in Fir Wood (Abies alba). Iranian Journal of Wood and Paper Science Research, 28 (2): 298-265 (In Persian).
5
-Haque, N., 1997. A Literature Review of Research into Wood-Plastic Composites. Ms. Thesis. University of Wales, Bangor. 1-11.
6
-Hassanpoortichi, A., Bazyar, B., Khademieslam, H., Rangavar, H. and Talaeipour, M., 2016. The Effect of Nano-Wollastonite on Biological, Mechanical, Physical, and Microstructural Properties of the Composite Made of Wood-Cement Fiber. Journal of Fundamental and Applied Sciences, 8: 1466–1479.
7
-Ibach, R. and Ellis, W., 2005. Lumen Modifications, Handbook of Wood Chemistry and Wood Composites, Boca Raton, Fla.: CRC Press, pages 421-446.
8
-Li, Y., Liu, Y., Haipeng, YU. and Qingfeng, S., 2009. Property Improvement of Wood Polymer Composites with Glycidyl Methacrylate, Key Laboratory of Bio-based Material Science and Technology of Ministry of Education, Northeast Forestry University, Harbin 150040, China.
9
-Li, Y., Liu, Y., Wang, X., Wu, Q., Yu, H. and Li, J., 2011. Wood-Polymer Composites Prepared by In-situ Polymerization of Monomers within Wood. Journal of Applied Polymer Science, 119(6): 3207–3216.
10
-Li, Y., Meng, X., Li, J. and Liu, Y., 2010. Performance of Wood-Polymer Composite Prepared by In-situ Polymerization of Styrene, Applied Mechanics and Materials Vols. 26-28: 181-185, Trans Tech Publications, Switzerland.
11
-Mehrabzadeh, M. and Kamal, M. R., 2009. Effects of Different Types of Clays and Maleic Anhydride Modified Polystyrene on Polystyrene/Clay Nanocomposites. Iranian Journal of Polymer Science and Technology, 22(2): 151-157.
12
-Meyer, J., 1981. Wood-Polymer Materials: State of the Art. Wood Science, 14 (2): 49- 54
13
-Modaberi, A., Adeli, K. and Soosani, J., 2014. Evaluating Populus Nigra Absolute Age of Exploitation with Different Planting Distances in the Central Zagros. Philippine Scientist Journal, 52(1): 56–61.
14
-Omidvar, A., 2009. Wood-Polymer Composite. Gorgan University of Agricultural Sciences and Natural Resources, Gorgan, 127pp.
15
-Rangavar, H., Khojasteh Khosro, S. and Taghipour Javy, M., 2018. The Effect of Nano Wollastonite on the Fire Resistance and the Adhesion Properties of Water Based Acrylic Coating on Wood Surface. Iranian Journal of Wood and Paper Science Research, 33 (2): 166-178 (In Persian).
16
-Razi, P. and Raman, A., 2000. Studies on Impact Fracture Properties of Wood-Polymer Composites, Journal of Composite Materials, 34 (12): 980-997.
17
-Rozman, H.D., Kumar, R.N., Abusamah, A. and Saad, M.J., 1998. Rubber Wood-Polymer Composites Based on Glycidyl Methacrylate and Diallylphthalate. Journal of Applied Polymer Science, 67: 1221-1226.
18
-Saiful Islama, Md., Sinin Hamdana, Jusohb, I. Rezaur Rahmana, Md. and Saleh Ahmed., Abu., 2012. The Effect of Alkali Pretreatment on Mechanical and Morphological Properties of Tropical Wood Polymer Composites, Materials and Design, 33: 419–424.
19
-Schaudy, R. and Proksch, E., 1982. Wood-Plastic Combinations with High Dimensional Stability. Industrial and Engineering Chemistry Research and Development, 21 (3): 369-375.
20
-Schneider, M.H., Phillips, J.G., Tingley, D.A. and Brebner, K.I., 1990. Mechanical Properties of Polymer-impregnated Sugar Maple. Forest Products Journal, 40(1): 37–41.
21
-Siau, J.F., 1969. The Swelling of Bass Wood Vinyl Monomers. Journal of Wood Science, 1(4): 250-253.
22
-Siau, J.F., Davidson, R.W., Meyer, J.A. and Skaar, C. 1968. A geometrical Model for Wood–Polymer Composites. Wood Science and Technology, 1(2): 116–128.
23
-Stolf, D.O. and Roco Lahr., F.A., 2004. Wood- polymer Composites: Physical and Mechanical Properties of Some Wood Species Impregnated with Styrene and Methyl Methacrylate. Materials Research, 7(4): 611- 617.
24
-Taghiyari H.T., 2012. Fire-Retarding Properties of Nano-Silver in Solid Woods. Wood Science and Technology; 46(5): 939 – 952.
25
-Tzakor-Rezaie, V., Najafi A. and Sinaie, A., 2016. The Effect of Nano-Wollastonite on Bending Properties and Fire Resistance of Wood Flour/Polypropylene Composite. Iranian Journal of Wood and Paper Science Research, 31(3):425-43 (In Persian).
26
-Yalinkilic, M.K., Tsunoda, K., -Takahashi, M., Gezer, E.D., Dwianto, W. and Nemoto, H., 1998. Enhancement of Biological and Physical Properties of Wood by Boric Acid–Vinyl Monomer Combination Treatment. Holzforshung, 52 (6): 667–672.
27
-Zabel, R.A. and Morrell, J.J. 1992. Wood Micro biology: Decay and Its Prevention. Academic Press. 476 pp
28
ORIGINAL_ARTICLE
تاثیر سامانه بیوپلیمری کیتوزان و نانوالیاف سلولزی بر ویژگیهای نوری و مقاومتی خمیرکاغذ شیمیایی- مکانیکی(CMP )
این تحقیق با هدف تاثیر استفاده از کیتوزان و نانوسلولز بر ویژگی های مقاومتی خمیرکاغذ شیمیایی- مکانیکی(CMP) انجام شد. به همین منظور، ابتدا مقداری ازخمیرشیمیایی-مکانیکی(CMP) رنگبری شده کارخانه چوب و کاغذ مازندران به عنوان نمونه شاهد انتخاب شد. سپس نانو الیاف سلولزی به صورت ژل سفید رنگ و در 3 سطح 0 ،2 و 3 درصد استفاده گردید. همچنین کیتوزان در 5 سطح 0، 5/0، 1، 5/1و2 درصد به سوسپانسیون خمیر کاغذ CMP حاصل اضافه شد. از خمیرکاغذهای مذکور کاغذهایی با وزن پایه gr/m2 60 تهیه و خواص نوری و مقاومتی آن ها طبق آزمون های استاندارد TAPPI اندازه گیری و مقایسه گردید. نتایج نشان داد که با افزودن کیتوزان مقاومت های به پارگی، کششی، ترکیدن، طول پارگی، مقاومت به عبور هوا،زردی و سبز رنگی در کاغذ حاصل از خمیرکاغذ CMP افزایش و روشنی، جذب آب و فاکتورa* کاهش یافته است. با افزودن نانو سلولز و کیتوزان به خمیرکاغذ CMP مقاومت های کششی، ترکیدن، طول پارگی و مقاومت به عبور هوا، جذب آب، زردی و فاکتورa* افزایش و مقاومت به پارگی، روشنی، سبز رنگی، ماتی کاهش یافته است. نتایج نشان داد که افزودن 2 درصد کیتوزان و همچنین افزودن همزمان2 درصد کیتوزان و 3 درصد نانو سلولز به خمیرکاغذ CMP باعث بهبود اکثر ویژگی ها درکاغذ حاصل شده است و می تواند به عنوان تیمار برتر انتخاب و معرفی گردد.
https://ijwpr.areeo.ac.ir/article_121142_6595e6ee4aa6d32a4fa19af2b5b34515.pdf
2020-04-20
61
75
10.22092/ijwpr.2020.128617.1584
کیتوزان
نانوسلولز
خمیرکاغذ CMP
ویژگی های نوری و مقاومتی
رامین
ویسی
vaysi_r452@yahoo.com
1
عضوهیات علمی واحد چالوس
LEAD_AUTHOR
یوسف
یوسفی گلوردی
yousefyousefigollordi@gmail.com
2
گروه صنایع چوب و کاغذ، دانشگاه آزاد اسلامی واحد چالوس
AUTHOR
-Aliniyay Lakani, S., Afra, E. and Yousefi, H., 2016. Studing the effect of pulp refining and paper pressing and using nano fibrillated cellulose to improve the CMP pulp properties, Iranian Journal of Wood and Paper Science Research,31)2),224-236.
1
-Asadi,F., Nazarnezhad, N. and Asadpour Attoeii, Gh., 2016. Preparation of nano-cellulose from cladophora, fibrous algae, and utilizing at the product to improve the strength properties of CMP pulp, Iranian Journal of Wood and Paper science Research ,31(4), 695-702.
2
-Ashoori, A., Harun, J., Raverty, J.D., Zin, W. Md. and Nor, M., 2005. Effect of chitosan addition on the surface properties of kenaf (Hibiscus cannabinus) paper, Iranian polymer journal, 9, 807-814.
3
-Barzan A. and Soraki, S., 2002. Procedure of experimental for pulp and paper, Mazandaran Wood and Paper Industries, Sari, Iran, 111-121, (in Persian).
4
-Costa, M.M. and Colodette, J.L., 2007. The impact of kappa number composition on eucalyptus kraft pulp bleach ability, Brazilian Journal of Chemical Engineering, 24(1): 61-71.
5
-Henriksson, M., Berglund L.A., Laksson, P. and Nishino,T., 2008. Cellulose nano-paper structures of high toughness, Biomacromolecules, 9(6), 1579-1585.
6
-Hasanzadeh, H., Hejazi, S., Yosofi, H., Mahdavi, M. and Abdolkhani, A., 2013. Effect of using cellulosic nanofibers and cationic starch on properties of rice stalk soda antraqinon pulp, Journal of Forest and Wood Products, 67(1), 105-117.
7
-Hadilam,M., Afra, E., and Yousefi, H., 2013. Effect of cellulose nano-fibers on the properties of bagasse paper, Journal of Forest and Wood Products, 66(3), 351-366.
8
-Heermann, M., Welter, S. and Hubbe M. A., 2006. Effect of high treatment levels in a dry-strength additives: program based on deposition on polyelectrolyte complexes, how much glue is too much? Tappi journal, 5(6), 9-14.
9
-Kang, T., 2007. Role of external fibrillation in pulp and paper properties, Doctoral dissertation, Department of forest products technology, Helsinki University of Technology, Finland, 41 p.
10
-Li, H., Du, Y. and Xu, Y., 2004. Interaction of cationized chitiosan with components in a chemical pulp suspension, carbohydrate polymers journal, 58, 205-214.
11
-Limmatainnen, H., Visanko,M., Sirvio,J. A., Hormi, O.E.O. and Niinimaki, J., 2012. Enhancement of nano-fibrillation of wood cellulose through sequential periodate-chlorite oxidation, Bio-macromolecules, (13):1592-1597.
12
-Luiss, A.J. and Jackson, C., 2002. Text book of pulping technology, McGraw-Hill, New York, NY, 126-132.
13
-Mohseni Tavakoli, Resalati H., Afra, E., Imani , R., Liimatainen, H., 2014.Effect of chitosan-nanosilica sehf-assembly layers chitosan on cotton liner fiber and the paper properties, Iranian Journal of Wood and Paper Science Industries,5)2),81-92.
14
-Nikolaeva, M., 2010, Measurement and improvement of wet paper web strength, Master Degree program in chemical and process engineering, Lappeenranta University of Technology:38-40.
15
-Nada, A. M. A., El-Sakhawy, M., Kamel, S.,and Eid,M.A.M.,2005. Effect of chitosan and its derivatives on the mechanical and electrical properties of paper sheets. Egyptian journal of solids, 28(2):202-208.
16
-Nicu, R., Bobu,E.., and Desbrieres, J.,2010, Chitosanas cationic polyelectrolyte in wet-end papermaking system, Cellulose chemistry and technology journal,10:102-108.
17
-Nogi, M. Iwamoto, S., Nakagaito,N.A. , and Yano,H., 2009. Optically transparent nano-fiber paper, Advanced Materials, 21:1595-1598.
18
-Pourkarim Dodangeh, H., Jalali Torshizi,H., Rudi,H., Ramzani,O., 2016. Performance of nano fibrillated cellulose(NFC) and chitosan bio-polymeric system on recycled and paper properties of old corrugated containers, Iranian Journal of Wood and Paper Science Industries,7)2),297-309.
19
-Piet, H.B., Jan, B., and Wielema T.A., 2002. Anionic wet-end starches a wealth of possibilities to improve paper quality and/or reduce paper, TAPPI Technology Summit.
20
-Pariser,E.R., and Lombardi,d.p, 1988. A guid to the research literature chitin, Source book, Plenum Press, New Yourk,USA, P:560.
21
-Rahmaninia, M., Rohi,M., Ramezani,O., and Zabihzadeh, S.M., 2015. The effect of pulp suspension pH on the performance of chitosan-nanobentonite as a dry strength additive in hardwood CMP pulp, Journal of Forest and Wood Products, 68(2), 347-357.
22
-Rashidi Joybari, I., Azadfalah, M., Resalati, H., Hamzeh, Y., Yosofi, H., 2015. Investigation of effect cationic soft wood fiber by EPTMAC and mixed it's with CMP pulp, Journal of Forest and Wood Products, 68(2):235-245.
23
-Rasoulpour Hedayati, N., Nazarnezhad, N., Omid Ramezani, O., 2012. Fiber Surface Modification of Kraft Pulp in Presence of Chitosan Polymer, Journal of Forest and Wood Products, 67(2), 489-501.
24
-Syverud, K. and Stenius, P., 2009. Strength and barrier properties of MFC films, Cellulose, (16):75-85.
25
-Steckel,H., and Nogly,F.M.,2003. Production of chitosan pellets by extrusion/Herinization, European Journal. PHarm.BiopHar, 46, 1-6.
26
-Tajik, M., 2015. Using of nano-cellulose, poly acrylamide and cationic starch in internal H-bond reinforced of bagasse printing paper, M.S. thesis, Shahid-Behesti University, 1-2.
27
-Technical Association of Pulp and Paper Industry, 2009. Standard Test Methods. Tappi Press, Atlanta, GA. USA.
28
-Vanerek, A., Alince, B., and Van de ven, T.G.M., 2006. Bentonite delamination induced by pulp fibers under high shear monitored by calcium carbonate deposition, colloids and surfaces A: Physicochemical and engineering aspects, 280(1-3):1-8.
29
-Vaysi, R., Kord, B., 2013.The effects of H2O2 bleaching and DTPA spraying on the brightness stability of hornbeam CMP pulp following accelerated irradiation aging, BioResource Journal,8(2),1909-1917.
30
-Wagberg, L., Forsberg,S., Johansson,A., and Juntti, P., 2002. Engineering of fiber surface properties by application of polyelectrolyte multilayer concept, Part 1. Modification of paper strength. Journal of Pulp and Paper Science, 28(7):222-228.
31
-Yousefi, H. Nishino,T., Faezipour,M., Ebrahimi,G., and Shakeri, A., 2011. Direct fabrication of all-cellulose nanocomposite from cellulose microfibers using ionic liquid-based Nanowelding, Biomacromolecules, 12(11):4080-4085.
32
ORIGINAL_ARTICLE
عملکرد نشاسته خام و اکسید شده به عنوان افزودنی های تقویت کننده پیوند بین لایه ای در مقواهای چندلایه بازیافتی
در تولید مقوا به ویژه انواع با گراماژ بالا، محدودیت آبگیری از خمیرکاغذ ، سرعت تولید کاغذ را به شدت پایین میآورد. در این حالت، یکی از راهکارهای متداول در بهبود آبگیری و افزایش سرعت ماشین کاغذ، تولید مقوای چندلایه میباشد. هرچند بعضی مواقع این لایهها بدون اتصال دهنده روی یکدیگر قرار میگیرند، اما در اکثر مواقع برای تقویت استحکام پیوند بین لایهای از نشاسته به عنوان افزودنی بین لایهها استفاده میشود. در این تحقیق اثر پاشش دو نوع نشاسته متداول در صنعت (اکسید شده و خام) را در میزان پاششهای مختلف (صفر، 1، 5/1 و 2 گرم بر مترمربع) در بین دو لایه مقوا بررسی شد. لایه رویی مقوا از کاغذ حاصل از الیاف بازیافتی خمیرکاغذ چاپ وتحریر و لایه زیرین از کاغذ حاصل از الیاف بازیافتی خمیرکاغذ کارتن کنگرهای کهنه تشکیل شدند. گراماژ هر لایه حدود 100 گرم بر مترمربع در نظر گرفته شد. نتایج نشان داد که اسپری هر دو نوع نشاسته در بین دو لایه باعث افزایش قابل توجه ویژگیهای مقاومتی اندازهگیری شده، نسبت به تیمار شاهد گردیدند. در مقایسه بین دو نوع نشاسته، نشاسته خام کارایی بهتری از نشاسته اکسید شده داشت. بیشترین تاثیر هر دو نوع نشاسته در ویژگیهای اندازهگیری شده در سطح 5/1 گرم بر متر مربع اتفاق افتاد.
https://ijwpr.areeo.ac.ir/article_121143_726174fd8ce97635a23e00391b7d1938.pdf
2020-04-20
76
87
10.22092/ijwpr.2020.341239.1591
مقوای چندلایه
پیوند بین لایه ای
نشاسته خام
نشاسته اکسید شده
اسپری کردن
احسان
فاتحی
ehsan161273@gmail.com
1
دانشگاه تربیت مدرس
AUTHOR
مهدی
رحمانی نیا
mrahmaninia@yahoo.com
2
عضو هیئت علمی دانشگاه تربیت مدرس
LEAD_AUTHOR
امیر
خسروانی
khosravani@modares.ac.ir
3
استادیار، دانشگاه تربیت مدرس
AUTHOR
زینب
آیرون
raheleiron@yahoo.com
4
دانشگاه تربیت مدرس
AUTHOR
-Adamopoulos, S., Passialis, C. and Voulgaridis, E., 2014. Grammage and Structural Density as Quality Indexes of Packaging Grade Paper Manufactured from Rcycled Pulp. Drewno, 57(191): 145-151.
1
-Ashori, A., Harun, J., Zin, W.M. and Yusoff, M.N.M., 2006. Enhancing Dry Strength Properties of Kenaf (Hibiscus Cannabinus) Paper through Chitosan. Polymer-Plastics Technology and Engineering, 45(1): 125-129.
2
-Ek, M., Gellerstedt, G. and Henriksson, G., 2009. Pulp and Paper Chemistry and Technology, Paper Products Physics and Technology, Volume 4, Stockholm, 333p.
3
-Halmschlager, G., 2001. Multi-Layer & Multi-Ply Concepts-Driving Forces and Advantages. Wochenblatt fur Papierfabrikation, 129(22): 1518-1521.
4
-Hamzeh, Y., Sabbaghi, S., Ashori, A., Abdulkhani, A. and Soltani, F., 2013. Improving wet and dry strength properties of recycled old corrugated carton (OCC) pulp using various polymers. Carbohydrate Polymers, 94: 577–583.
5
-Hubbe, M.A., 2006. Bonding between Cellulosic Fibers in the Absence and Presence of Dry-Strength Agents: A Review. BioResources, 1(2): 281-318.
6
-Jung, Y.J., Kim, T.Y., Jang, Y.J., Yoon, J.H. and Heo, Y.D., 2008. Effects of Base Paper Properties and the Composition of Adhesives on the Physical Properties of Multilayered Paper. Journal of Korea Technical Association of the Pulp and Paper Industry, 40: 34-42.
7
-Maurer, H.W., 2009. Starch in the Paper Industry, Chemistry and Technology, 18(3): 658-706.
8
-Midukov, N.P., Schrinner, T., Grossmann, H., Smolin, A.S. and Kurov, V.S., 2015. Effect of Virgin Fiber Content on Strength and Stiffness Characteristics of a Three-layer Testliner. BioResources, 10(1): 1747-1756.
9
-Mishra, A.K., 2005. Modified starches for enhanced paper quality and higher productivity. Pap Asia, 21, 30-33.
10
-Paulapuro, H., 2000. Paper and Board Grades. Papermaking Science and Technology book series, TAPPI press, Atlanta, 132p.
11
-Rahmaninia, M., Hosseinian, K. and Khosravani, A., 2017. The influence of nanochitosan addition on the process and quality properties of printing and writing paper made from recycled fibers. Journal of Forest and Wood Products (JFWP), Iranian Journal of Natural Resources, 69(4): 831-840.
12
-Rahmaninia, M., Rohi, M., Hubbe, M.A., Zabihzadeh, S. M. and Ramezani, O., 2018. The performance of chitosan with bentonite microparticles as wet-end additive system for paper reinforcement. Carbohydrate polymers, 179: 328-332.
13
-Rohi, M., Ramezani, O., Rahmaninia, M., Zabihzadeh, S.M. and Hubbe, M.A., 2016. Influence of pulp suspension pH on the performance of chitosan as a strength agent for hardwood CMP paper. Cellulose Chemistry and Technology, 50, 873-878.
14
-Ryu, J.Y. and Lee, H.L., 2007. Improvement of Plybond Strength of Two-ply Sheets by Spraying of Starch Blends, Tappi Journal, 6(5): 3-8.
15
-Scott, W.E., Abbott, J.C. and Trosset, S., 1997. Properties of Papers: An Introduction. Second Edition, TAPPI Press, Atlanta, 191p.
16
-Somerkallio, M., 2012. Spray application of strength chemicals. Master Science Thesis, Tampere University of Technology, Finland.
17
-Statista, 2018. Production volume of paper by type. https://www.statista.com/statistics/270317/production-volume-of-paper-by-type/
18
ORIGINAL_ARTICLE
اشباع پذیری چوب راش و کاج با اسید پیرولیز تهیه شده از گونههای مختلف چوب
اسید پیرولیز یا سرکه چوب مایعی تیره رنگ است که از تراکم بخار و دود ساطع شده از پیرولیز حرارتی چوب یا هر ماده لیگنوسلولزی دیگر بدست میآید. در این تحقیق ابتدا یک کوره حرارتدهی ساخته شد تا با استفاده از آن امکان اعمال یک برنامه دمائی-زمانی دقیق وجود داشته باشد. سپس چوب سه گونه مختلف شامل بلوط، پرتقال و سرو تحت یک برنامه دمایی-زمانی مشخص تحت پیرولیز قرار گرفتند. بخار و دودهای ساطع شده از کوره داخل لولهای به طول 20 متر با استفاده از جریان آب سرد خنک و متراکم شده و سپس به صورت مایع در داخل یک ظرف جمعآوری شدند. عمل پیرولیز در سه محدوده دمائی مختلف شامل 200، 260 و 330 درجه سانتیگراد انجام شد. اسید پیرولیزهای بدست آمده دارای رنگ و اسیدیته متفاوتی با توجه به دمای سرکهگیری بودند. گونههای مختلف چوب مورد استفاده برای سرکهگیری نیز بر روی این صفات اثرگذار بود. طی شرایط حرارتدهی استفاده شده در این مطالعه گونه سرو نسبت به گونههای پهنبرگ درصد پیرولیز کمتری داشت. مقادیر افزایش وزن نمونههای چوبی تیمار شده با توجه به گونهی چوب مورد اشباع، دمای تهیه اسید پیرولیز و همچنین چوب مورد استفاده برای پیرولیز از 5 تا 35 درصد متغییر بود. اسید پیرولیزهای بدست آمده در دمای بالاتر منجر به درصد افزایش وزن بالاتری شدند. اسید پیرولیزهای بدست آمده در دمای پایینتر با نرخ بیشتری از چوبهای تیمار شده آبشویی شدند. همچنین گونه چوب مورد استفاده برای پیرولیز نیز اثر معنیداری بر روی میزان آبشویی مواد از چوب داشت.
https://ijwpr.areeo.ac.ir/article_121257_e2031c568efbabd60a614c424530e604.pdf
2020-04-20
88
101
10.22092/ijwpr.2020.341610.1599
اسید پیرولیز
اشباعپذیری
درصد افزایش وزن
آبشویی
دما.
فرهود
فیروزبهی
farhood_firoozbehi2@yahoo.com
1
Ms. in wood science and technology, University of Tehran, I. R. Iran
AUTHOR
داود
افهامی سیسی
efhami@ut.ac.ir
2
عضو هیات علمی
LEAD_AUTHOR
یحیی
همزه
hamzeh@ut.ac.ir
3
استاد- دانشکده منابع طبیعی کرج- دانشگاه تهران
AUTHOR
اصغر
طارمیان
tarmian@ut.ac.ir
4
عضو هیئت علمی دانشگاه تهران
AUTHOR
رضا
اولادی
oladi@ut.ac.ir
5
عضو هیات علمی گروه علوم و صنایع چوب و کاغذ دانشگاه تهران
AUTHOR
-Anonymous, 2013. Wood The fuel of the future. DOI: http://www.economist.com/news/business /21575771-environmental-lunacy-europe-fuel-future.
1
-Demirbas, A., Ahmad, W., Alamoudi, R. and Sheikh, M., 2016. Sustainable charcoal production from biomass. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 38(13): 1882-1889.
2
-Hassanpanah, D., 2011. Effect of different concentrations of wood vinegar on potato mini-tuber production Agria cultivar under greenhouse conditions. Quarterly Journal of Plant Production, 2(4): 67-75.
3
-FAO, 2018. Global Forest Products Facts and Figures. FAOSTAT (available at Faostat.fao.org).
4
-Mun, S.P., Ku, C.S. and Park, S.B., 2007. Physicochemical characterization of pyrolyzates produced from carbonization of lignocellulosic biomass in a batch-type mechanical kiln. Journal of Industrial and Engineering Chemistry, 13(1): 127-132.
5
-Nakai, T., Kartal, S. N., Hata, T. and Imamura, Y., 2007. Chemical characterization of pyrolysis liquids of wood-based composites and evaluation of their bio-efficiency. Building and Environment, 42(3): 1236-1241.
6
-Noor Azrieda, A.R. and Salmiah, U., 2015. The potential of wood vinegar as wood repellent obtained from pyrolysis of rhizophora sp. against brown rot and white rot fungi. Conference Paper at CFFPR, Kuala Lumpur, Malaysia, September.
7
-Pimenta, A., Fasciotti, M., Monteiro, T. and Lima, K., 2018. Chemical composition of pyroligneous acid obtained from eucalyptus gg100 clone. Molecules, 23(2): 426.
8
-Poletto, M., 2017. Assessment of the thermal behavior of lignins from softwood and hardwood species. Maderas. Ciencia y tecnología, 19(1): 63-74.
9
-Saberi, M., Sarpeleh, A. and Askary, H., 2016. Control of Damping off and Increasing Some of the Growth Traits in Greenhouse Cucumber Using Citrus Wood Vinegar. Journal of Applied in Plant Protection, 4(2): 99-111.
10
-Saberi, M., Sarpeleh, A., Askary, H. and Rafiei, F., 2013. Effects of wood vinegar and vermicompost combination in the control of Verticillium dahliae the causal agent of verticillium wilt of greenhouse cucumber. Journal of Applied Entomology and Phytopathology, 81(1): 51-60.
11
-Scholz, G., Krause, A. and Militz, H., 2010. Exploratory study on the impregnation of Scots pine sapwood (Pinus sylvestris L.) and European beech (Fagus sylvatica L.) with different hot melting waxes, Wood Science and Technology, 44(3): 379-388.
12
-Sims, R.E. and Handford, P., 1991. Wood-the Fuel of the Future. New Zealand Engineering, 46(9), 14-15.
13
-Tarasin, M., 2013. Effect of eucalyptus wood vinegar on rubberwood infestation by Asian subterranean termite, Coptotermes gestroi Isoptera: Rhinotermitidae. Communications in agricultural and applied biological sciences, 78(2): 317-322.
14
-Temiz, A., Akbas, S., Panov, D., Terziev, N., Alma, M. H., Parlak, S. and Kose, G., 2013. Chemical composition and efficiency of bio-oil obtained from giant cane (Arundo donax L.) as a wood preservative. BioResources, 8(2): 2084-2098.
15
-Theapparat, Y., Chandumpai, A. and Faroongsarng, D., 2018. Physicochemistry and Utilization of Wood Vinegar from Carbonization of Tropical Biomass Waste. Tropical Forests: New Edition, 163.
16
-Tiilikkala, K., Fagerna, L. and Tiilikkala, J., 2010. History and use of wood pirolisis liquids as biocide and plant protection product. Open Agriculture Journal, 4 (1): 111–118.
17
-Velmurugan, N., Chun, S. S., Han, S.S. and Lee, Y.S., 2009a. Characterization of chikusaku-eki and mokusaku-eki and its inhibitory effect on sapstaining fungal growth in laboratory scale. International Journal of Environmental Science & Technology, 6(1): 13-22.
18
-Velmurugan, N., Han, S.S. and Lee, Y.S., 2009b. Antifungal activity of neutralized wood vinegar with water extracts of Pinus densiflora and Quercus serrata saw dusts. International Journal of Environmental Research, 3(2): 167-176.
19
-Unger, A., Schniewind, A. and Unger, W., 2001. Conservation of Wood Artifacts. Springer Science & Business Media. 578 pages
20
-Wessapan, T., Sutthisong, S., Somsuk, N., Hussaro, K. and Teekasap, S., 2013. A Development of Pyrolysis Oven for Wood Vinegar Production. EAU Heritage Journal: Science and Technology, 7(1): 50-58.
21
-Wu, Q., Zhang, S., Hou, B., Zheng, H., Deng, W., Liu, D. and Tang, W., 2015. Study on the preparation of wood vinegar from biomass residues by carbonization process. Bioresource Technology, 179 (1): 98-103.
22
ORIGINAL_ARTICLE
اثر هدایت الکتریکی بر کارایی و برهمکنش نشاسته کاتیونی – نانوسیلیکای آنیونی در خمیرکاغذ
با توجه به اینکه الیاف سلولزی در کاغذسازی حاوی بار منفی هستند، بنابراین برخی مواد افزودنی پلیمری که در داخل خمیرکاغذ بهکار میروند، حامل یونهای دارای بار مخالف (پلی الکترولیت کاتیونی) میباشند. این در حالی است که با افزایش هدایت الکتریکی سوسپانسیون، کارایی بسیاری از پلیالکترولیتها با مشکل مواجه میشود. لذا با توجه به تلاش صنایع به بستن سیستم آب و مصرف آب تازه کمتر و در نتیجه افزایش هدایت الکتریکی خمیرکاغذ، لازم به بررسی است که عملکرد مواد افزودنی کارآمد برپایه پلی الکترولیتها نظیر نشاسته کاتیونی - نانوسیلیکای آنیونی تا چه حد تحت تاثیر منفی قرار میگیرد. به همین دلیل میزان تاثیرپذیری عملکرد ترکیب افزودنی مذکور از هدایت الکتریکی خمیرکاغذ مورد بررسی قرار گرفت. نتایج نشان داد هدایت الکتریکی تاثیر منفی بر کارایی این سیستم ماده افزودنی پایانه تر داشته است؛ اما میزان تاثیرگذاری آن به ویژگی مورد بررسی مرتبط بوده است. چنانکه در برخی ویژگیها در مقدار کم پلیالکترولیت و هدایت الکتریکی زیاد، کارایی مثبت این سیستم ماده افزودنی دیگر معنیدار نبود . اما در برخی دیگر از ویژگیهای خمیرکاغذ، نظیر پیوند درونی و درجه روانی، علیرغم اثرات منفی هدایت الکتریکی زیاد، همچنان کارایی مثبت نشاسته– نانوسیلیکا بصورت معنیداری مشهود بود.
https://ijwpr.areeo.ac.ir/article_121258_4b240a171ee6aee55d3c9d7a4bd7b49b.pdf
2020-04-20
102
112
10.22092/ijwpr.2020.341345.1593
هدایت الکتریکی
پلی الکترولیت
نشاسته-نانوسیلیکا
کلویید
امیرحسین
مهرانفر
amirhossein.mehranfar@yahoo.com
1
گروه علوم و صنایع چوب و کاغذ، دانشکده منابع طبیعی، دانشگاه تربیت مدرس، نور، مازندران، ایران
AUTHOR
امیر
خسروانی
khosravani@modares.ac.ir
2
استادیار، دانشگاه تربیت مدرس
LEAD_AUTHOR
مهدی
رحمانی نیا
rahmaninia@modares.ac.ir
3
دانشگاه تربیت مدرس
AUTHOR
-Cao, Q. and Bachmann, M., 2013. Polyelectrolyte adsorption on an oppositely charged spherical polyelectrolyte brush. Soft Matter, 9(20): 5087-5098.
1
-Gess, J.M., 1998. Retention of Fines and Fillers During Papermaking. TAPPI Press, Atlanta, 357p.
2
-Hamzeh, Y., 2014. Water and Wastewater Management in Pulp and Paper Industries. Iranian Student Book Agency, 456p.
3
-Horvath, A.E., Lindström, T. and Laine, J., 2006. On the indirect polyelectrolyte titration of cellulosic fibers. Conditions for charge stoichiometry and comparison with ESCA. Langmuir, 22(2): 824-830.
4
-Hubbe, M.A., 2005. Microparticle programs for drainage and retention: 1-36. In: Rodriguez, J.M., (Ed.). Micro and Nanoparticles in Papermaking. TAPPI Press, Atlanta, 197p.
5
-Khosravani, A., Latibari, A.J., Mirshokraei, S.A., Rahmaninia, M. and Mohammad Nazhad, M., 2010. Studying the effect of cationic starch-anionic nanosilica system on retention and drainage. BioResources,5(2): 939-950.
6
-Khosravani, A. and Rahmaninia, M., 2013. The potential of nanosilica–cationic starch wet end system for applying higher filler content in fine paper. BioResources, 8(2): 2234-2245.
7
-Mehranfar, A.H., Khosravani, A. and Rahmaninia, M., 2017. The effect of cationic starch degree of substitution on nanoparticle system performance in old corrugated containers recycling. Journal of Forest and Wood Products, 70(1):147-155.
8
-Rahmaninia, M. and Khosravani, A., 2015. Improving the paper recycling process of old corrugated container wastes. Cellulose Chemistry and Technology, 49(2): 203-208.
9
-Sabazoodkhiz, R., Rahmaninia M. and Ramezani, O., 2017. Interaction of chitosan biopolymer with silica nano-particle as a novel retention/drainage and reinforcement aid in recycled cellulosic fibers, Cellulose, 24: 3433–3444.
10
-Samoshina, Y., Nylander, T., Shubin, V., Bauer, R. and Eskilsson, K., 2005. Equilibrium aspects of polycation adsorption on silica surface: how the adsorbed layer responds to changes in bulk solution. Langmuir, 21(13): 5872-5881.
11
-Thorn, I. and Au, C.O., 2009. Applications of Wet-End Paper Chemistry. Springer, Netherlands, 226p.
12
-Wagberg, L., 2000. Polyelectrolyte adsorption onto cellulose fibres-A review. Nordic Pulp & Paper Research Journal, 15(5): 586-597.
13
-Wågberg, L., Winter, L., Ödberg, L. and Lindström, T., 1987. On the charge stoichiometry upon adsorption of a cationic polyelectrolyte on cellulosic materials. Colloids and surfaces, 27(1-3): 163-173.
14
-Wang, F. and Hubbe, M.A., 2002. Charge properties of fibers in the paper mill environment. 1. Effect of electrical conductivity. Journal of Pulp and Paper Science, 28(10): 347-353.
15
-Yousefhashemi, S.M., Khosravani, A., Yousefi, H., 2019. Isolation of lignocellulose nanofiber from recycled old corrugated container and its interaction with cationic starch-nanosilica combination to make paperboard. Cellulose, 26: 7207-7221.
16
ORIGINAL_ARTICLE
بررسی ساخت کامپوزیت سبک سه لایه از چوب سیمان و یونولیت
این مطالعه با هدف ساخت سازه سبک و کاهش اتلاف انرژی انجام گردیده است بدین منظور تولید محصولات چوب سیمان یا فرآوردههای کامپوزیت با ترکیب ذرات آلی مانند الیاف چوب و مواد لیگنوسلولزی با یونولیت مد نظر قرار گرفت. محصول مورد بررسی شامل چوب سیمان ساخته شده از الیاف روزنامه باطله و خرده چوب صنوبر با ضخامت 20 میلیمتر در دو طرف سازه و یونولیت با ضخامت 10 میلیمتر در وسط سازه تولید گردید. فرآوردههای تولیدی چوب سیمان یونولیت دارای خواص ترکیبی از چوب سیمان و یونولیت خواهد داشت. در این تحقیق با توجه به فاکتورهای متغیر مورد مطالعه که شامل مواد لیگنوسلولزی و مقدار ماده افزودنی (همانند کلرید کلسیم (Caclدر دو سطح 3 و 5 درصد بوده، نمونههای آزمونی تهیه شدند. بهترین شرایط مقاومتی ساخت سازه استفاده از 10% مواد لیگنوسلولزی بدست آمد. ضخامت نمونهها در دو سطح یونولیت یکسان بوده و کلیه شرایط ساخت مانند میزان آبدهی، فشار پرس، میزان همزدگی بطور یکسان و ثابت در نظر گرفته شد. در آزمایش خمش استاتیک میانگین نیروی حداکثر بار برای شکست آجر معمولی برابر 26/3933 نیوتن و میانگین بار حداکثر برای شکستن چوب سیمان یونولیت 78/389 نیوتن بدست آمد که در حدود 10% مقاومت آجر معمولی را دارد اما آجر معمولی در هنگام شکست بصورت ناگهانی می شکند در حالیکه آجر یونولیت بصورت تدریجی شکسته میشود و خواص عایق بودن بدلیل دارا بودن الیاف سلولزی و یونولیت در آن از آجر معمولی بیشتر است با توجه به مقاومت پایین برای استفاده در قسمتهای پارتیشن بندی پیشنهاد میگردد.
https://ijwpr.areeo.ac.ir/article_121259_32130ed5202fe387b225ba3f72c3bec7.pdf
2020-04-20
113
125
10.22092/ijwpr.2020.126127.1540
چوب سیمان یونولیت
مقاومت خمشی
سیمان پرتلند
کلریدکلسیم
فرداد
گلبابائی
ijwpr@areeo.ac.ir
1
بخش تحقیقات علوم چوب و فراورده های آن، مؤسسه تحقیقات جنگل ها و مراتع کشور، سازمان تحقیقات، آموزش و ترویج کشاورزی، تهران، ایران
LEAD_AUTHOR
رضا
حاجی حسنی
reza.hajihassani@gmail.com
2
دکتری صنایع چوب، بخش تحقیقات علوم چوب و فرآوردههای آن
AUTHOR
کامیار
صالحی
kamyarsalehi@yahoo.com
3
مربی پژوهشی ، بخش تحقیقات علوم چوب و فرآوردههای آن، موسسه تحقیقات جنگلها و مراتع کشور
AUTHOR
اصغر
تابعی
tabei_asr@yahoo.com
4
استادیار، گروه علوم و صنایع چوب و کاغذ، واحد آستارا، دانشگاه آزاد اسلامی، آستارا، ایران
AUTHOR
-Aliabadi, M., Golmohammadi, R., Aliaei, M. and Shahidi, R., 2016. Study of the sound absorption properties of common building materials in buildings Industrial and administrative of the country. Journal of Occupational Health Engineering. 3-3
1
-Amousi, F., Moradi, AS, and Mozafari, AS. 2006. Feasibility Study Use of wood-cement lightweight composites in salinization Buildings against natural disasters. Second International Conference Comprehensive crisis management in natural disasters
2
-ASTM, 1979. Standard method of the properties of wood base fiber and particle panel material USA.
3
-Concha-Barrientos, M., Campbell-Lendrum, D., Steenlan, K. and Occupational N., 2004. Protection of the Human Environment.
4
-Doosthosseini, K., 1996. Effect of material added on connection quality of Portland cement with populous particleboard, magazine of Iran Natural Resources 48 (47-58).in Persian
5
-Doosthoseini, K, 2001.wood composite materials, volume1 Publications of Tehran University (compilation).in Persian.
6
-Fernandes, E c., and Delgado, 1999. Cement bonded board from waste water treatment sludge of recycle paper mill. Department of Forest Product and Paper Science in the University of New Brunswick.
7
-Jenifer, L., 2003. Wood fiber surface treatment level effect on selected mechanical of wood fiber-cement composites. Forest Resources Laboratory.
8
-Hamadan Construction Engineering System Organization, 2016. Thermal insulation details Exterior walls and adjacent uncontrolled space
9
Materials and Details Committee
10
-Huang Chen, 1998.study on the manufacturing technology of cement bonded particle board using CCA-treated wood.
11
-Karimi S. and Hadi, M., 2011. Investigation of buildings with zero energy consumption, Second International Conference on Energy Optimization
12
-Karami, S. and Nai, M., 2018. Advantages and Disadvantages of Different Types of Thermal Structural Engineering in Prohun Structural Registration No. 445200,
13
-Kolofta, J.L. and Miler, M.L. 1994. Effect of deinking on the recycle potential of papermaking fibers, Pulp and Paper Canada, 95: 8. 41-49. (In Persian)
14
-Muawia, A., Dafalla and Mohammed, L. and Shuraim, A., 2017. Efficiency of polystyrene insulated cement blocks in arid regions International Journal of GEOMATE, Aug, 2017, Vol.13, Issue 36, pp.35-38 Geotec. Const. Mat. & Env. ISSN: 2186-2990, Japan, DOI: http://dx.doi.org/10.21660/2017.36.2779
15
-Mirshokrai, S.A., 1995. Technology of pulp & paper (translation), volume 1&2, publication of Payamenoor University. In Persian
16
-Mohr, B.j and Kurtis, K.L., 2003. Fiber cement composites for housing construction .Georgia institute of technology.
17
-Moslemi, A., 1980. A new technique to classify the compatibility of wood with cement. Wood Science and Technology. Volume 24, Number 4, 345-354.
18
-Nkem Ede, A., Alegiuno, V. and Oluwaseun Awoyera, P., 2014. Use of Advanced Plastic Materials in Nigeria: Performance Assessment of Expanded Polystyrene Building Technology System American Journal of Engineering Research (AJER) e-ISSN: 2320-0847 p-ISSN: 2320-0936 Volume-03, Issue-04, pp-301-308
19
-Rafiei S., Monir Abbasi, A. and Salehi Taleshi, M.J., 2015. Evaluation of Kermit Roofs with Polystyrene Block as one of the New Technologies of Manufacturing Industry. First National Congress of Civil Engineering and Construction Projects Engineering, Gorgan
20
-Stevulova, N., Hospodarova, V., Junak, J., 2016 Potential utilization of recycled waste paper fibres in cement CHEMINĖ TECHNOLOGIJA. 2016. Nr. 1(67)
21
-Tabarsa, T.1, Hossieni, M. and Valizadeh, E., 2012. Effect of nano- wollastonite on microscopic, mechanical and physical properties of cement-wood fibers composite
22
-Qixuate 2001, Effect of alkaline accelerator on cement composite properties. Faculty of Civil Engineering.
23
-Valizadeh, A., 2004, Investigation of Fiber-Cement Panels Using Waste Paper, MSc Thesis, Gorgan University of Agricultural Sciences and Natural Resources
24
-Wolfe, R.W. and Gjinolli, A. (1996). Cement-bonded wood composites as an engineering material. The Use of Recycled Wood and Paper in Building Applications, Madison, Wisconsin, pp. 84-91.
25
-Younguist, J.A.1997. Properties of composite panels. WOOD HANDBOOK. Printed in 1999 by the Forest Products Society FSP catalogue no. 7269. Page 10-26
26
Yucel, K.T., Basyigit, C. and Ozel, C., 2003. Thermal insulation properties of expanded polystyrene as construction and insulating materials. 15th Proceeding of Symposium on Thermo-physical Properties, in Boulder, Colorado, NIST/ASME, pp.54-66
27
-Zziwa, A., Kizito, S., Banana, Y., Kaboggoza, R.S. Kambugu, R. and Sseremba, O. E., 2006. Production of composite bricks from sawdust using Portland cement as a binder, 1 Department of Forest Products Engineering, Makerere University, P.O. Box 7062 Kampala, Uganda
28