Afra, Elyas
Immersion of paper in emulsified beeswax by ultrasonic method and its effect on paper properties [Volume 39, Issue 4, 2024, Pages 257-271]
Ahmadi, Hamed
Investigating the relationship between investment strategies, resilience and financial
knowledge on the production growth of wooden furniture industry in the post-Corona era: Moderating impact of government support [Volume 39, Issue 4, 2024, Pages 284-300]
Ahmadi, Mehrdad
Investigation on anatomical properties of Lagerstroemia spp. bush in
Tonkabon County [Volume 39, Issue 4, 2024, Pages 327-335]
Akbari, Moghadase
Immersion of paper in emulsified beeswax by ultrasonic method and its effect on paper properties [Volume 39, Issue 4, 2024, Pages 257-271]
Aminian, Hedayatolah
Investigating of physical and mechanical properties of single-layer particleboard made from Prosopis cineraria and industrial wood particles [Volume 39, Issue 4, 2024, Pages 272-283]
B
Bayatkashkoli, Ali
Investigating the reinforcement of parallel chip lumber (PSL) obtained from reed waste and laminated veneer lumber (LVL) made of spruce with fiber reinforced polymer (FRP) [Volume 39, Issue 2, 2024, Pages 95-110]
D
Daeepour, Zahra
Effect of fermentation pretreatment and extraction on the acoustic properties of Ash wood (Fraxinus excelsior) [Volume 39, Issue 1, 2024, Pages 27-40]
Dahmardeh Ghaleno, Mohammad
Investigating the reinforcement of parallel chip lumber (PSL) obtained from reed waste and laminated veneer lumber (LVL) made of spruce with fiber reinforced polymer (FRP) [Volume 39, Issue 2, 2024, Pages 95-110]
Dehghani Firouzabadi, Mohammadreza
Immersion of paper in emulsified beeswax by ultrasonic method and its effect on paper properties [Volume 39, Issue 4, 2024, Pages 257-271]
E
EBADI, S. ESHAGH
The Effect of nano-Chitosan, nano-Cellulose and DTPA Spray on the Optical Properties of Paper Obtained from Chemical-mechanical Pulp (CMP) [Volume 39, Issue 1, 2024, Pages 55-71]
Elahifard, Zahra
Investigation on anatomical properties of Lagerstroemia spp. bush in
Tonkabon County [Volume 39, Issue 4, 2024, Pages 327-335]
F
Farajpour Roudsari, Arash
Glass beads and shell on the physical and mechanical properties of polymer matrix nanocomposites reinforced with glass fibers and beech wood flour [Volume 39, Issue 4, 2024, Pages 313-326]
G
Ghasemi, Amir Hosein
The use of Thyme extract (Zataria Multiflora) to make antibacterial food packaging paper [Volume 39, Issue 1, 2024, Pages 41-54]
Golbabaei, فرداد
Utilization of Corncob and Poplar (Populus deltoides) in Wood Plastics Nano Composites [Volume 39, Issue 2, 2024, Pages 146-162]
H
Hajihassani, Reza
Utilization of Corncob and Poplar (Populus deltoides) in Wood Plastics Nano Composites [Volume 39, Issue 2, 2024, Pages 146-162]
Hajihassani, Reza
Effect of thermo-oil process on biological, physical and mechanical performance of produced
thermo wood [Volume 39, Issue 3, 2024, Pages 236-252]
Haji Seyyed Javadi, Seyyed Mohsen
An Investigation into the Characterization of the painted wooden Shir-Sar of Taqavi house in Gorgan [Volume 39, Issue 3, 2024, Pages 213-235]
Hamzavi, Yaser
An Investigation into the Characterization of the painted wooden Shir-Sar of Taqavi house in Gorgan [Volume 39, Issue 3, 2024, Pages 213-235]
Heidari, ali
Studding the physical and mechanical properties of Walnut (Juglans regia L.) wood from regions of Mashhad and Maku in Iran [Volume 39, Issue 2, 2024, Pages 111-120]
J
Jafarzadeh, Hamed
Studding the physical and mechanical properties of Walnut (Juglans regia L.) wood from regions of Mashhad and Maku in Iran [Volume 39, Issue 2, 2024, Pages 111-120]
Jahan latibari, Ahmad
Identification of Walnut Tree Leaves Extractives Chemical Composition and
the Effect of Growth Time [Volume 39, Issue 1, 2024, Pages 72-83]
Jahan latibari, Ahmad
Effect of fermentation pretreatment and extraction on the acoustic properties of Ash wood (Fraxinus excelsior) [Volume 39, Issue 1, 2024, Pages 27-40]
Jahan latibari, Ahmad
Evaluation of the local dynamic modulus of elasticity in wooden tie by the stress wave method [Volume 39, Issue 2, 2024, Pages 133-145]
Jamalirad, Loya
Investigating of physical and mechanical properties of single-layer particleboard made from Prosopis cineraria and industrial wood particles [Volume 39, Issue 4, 2024, Pages 272-283]
K
Kargarfard, Abolfazl
Utilization of Corncob and Poplar (Populus deltoides) in Wood Plastics Nano Composites [Volume 39, Issue 2, 2024, Pages 146-162]
Kazemi Karchangi, Zahra
Preparation of cellulose air filter from bamboo fibers [Volume 39, Issue 4, 2024, Pages 301-312]
Khazaeian, Abolghasem
Transparent coatings performance on weathering resistance of preservative-treated wood [Volume 39, Issue 2, 2024, Pages 84-94]
Khorram Margavi, Khadijeh
Preparation of adsorbent from recycle newspaper and removal of metal ions from the pulp and paper mills wastewater [Volume 39, Issue 1, 2024, Pages 1-11]
Khosravi, Ebrahim
Evaluation of the local dynamic modulus of elasticity in wooden tie by the stress wave method [Volume 39, Issue 2, 2024, Pages 133-145]
L
Lashgari, Amir
Evaluation of the local dynamic modulus of elasticity in wooden tie by the stress wave method [Volume 39, Issue 2, 2024, Pages 133-145]
Lashgari, Amir
Investigating the relationship between investment strategies, resilience and financial
knowledge on the production growth of wooden furniture industry in the post-Corona era: Moderating impact of government support [Volume 39, Issue 4, 2024, Pages 284-300]
M
Manzour-olajdad, Seyed Mehdi
Use of Local Produced Papers as Base Paper for Making Wallpaper [Volume 39, Issue 3, 2024, Pages 181-197]
Mehdinia, Meysam
Investigation on anatomical properties of Lagerstroemia spp. bush in
Tonkabon County [Volume 39, Issue 4, 2024, Pages 327-335]
Mehri Charvadeh, Meisam
Effective indicators for the stability of a stable supply chain model in the cellulosic industry by Vickor method. [Volume 39, Issue 1, 2024, Pages 12-26]
Moazeni, Edris
Investigation on anatomical properties of Lagerstroemia spp. bush in
Tonkabon County [Volume 39, Issue 4, 2024, Pages 327-335]
N
Naghdi, Ramin
Investigating the effect of knot size on the dynamic modulus of elasticity of beech wood (Fagus orientalis Libsky) [Volume 39, Issue 3, 2024, Pages 198-212]
Nahofteh Estarabadi, َAmir Mohamad
Transparent coatings performance on weathering resistance of preservative-treated wood [Volume 39, Issue 2, 2024, Pages 84-94]
Nazarnezhad, Noureddin
Preparation of adsorbent from recycle newspaper and removal of metal ions from the pulp and paper mills wastewater [Volume 39, Issue 1, 2024, Pages 1-11]
Nazarnezhad, Noureddin
The use of Thyme extract (Zataria Multiflora) to make antibacterial food packaging paper [Volume 39, Issue 1, 2024, Pages 41-54]
Nazarnezhad, Noureddin
Preparation of cellulose air filter from bamboo fibers [Volume 39, Issue 4, 2024, Pages 301-312]
Niazi, Fathollah
An Investigation into the Characterization of the painted wooden Shir-Sar of Taqavi house in Gorgan [Volume 39, Issue 3, 2024, Pages 213-235]
Noorirad, Mohamad
Investigating of physical and mechanical properties of single-layer particleboard made from Prosopis cineraria and industrial wood particles [Volume 39, Issue 4, 2024, Pages 272-283]
Nourbakhsh, Ali
Utilization of Corncob and Poplar (Populus deltoides) in Wood Plastics Nano Composites [Volume 39, Issue 2, 2024, Pages 146-162]
Nourbakhsh, Amir
Utilization of Corncob and Poplar (Populus deltoides) in Wood Plastics Nano Composites [Volume 39, Issue 2, 2024, Pages 146-162]
P
Pourmousa, Shademan
Effective indicators for the stability of a stable supply chain model in the cellulosic industry by Vickor method. [Volume 39, Issue 1, 2024, Pages 12-26]
Pourmousa, Shademan
Identification of Walnut Tree Leaves Extractives Chemical Composition and
the Effect of Growth Time [Volume 39, Issue 1, 2024, Pages 72-83]
Pourmousa, Shademan
Investigating the relationship between investment strategies, resilience and financial
knowledge on the production growth of wooden furniture industry in the post-Corona era: Moderating impact of government support [Volume 39, Issue 4, 2024, Pages 284-300]
R
Ramezani, Omid
Use of Local Produced Papers as Base Paper for Making Wallpaper [Volume 39, Issue 3, 2024, Pages 181-197]
Rasouli, Davood
Transparent coatings performance on weathering resistance of preservative-treated wood [Volume 39, Issue 2, 2024, Pages 84-94]
Rezanezhad, Shaghaygh
The use of Thyme extract (Zataria Multiflora) to make antibacterial food packaging paper [Volume 39, Issue 1, 2024, Pages 41-54]
Rezazadeh, Iesa
The Effect of nano-Chitosan, nano-Cellulose and DTPA Spray on the Optical Properties of Paper Obtained from Chemical-mechanical Pulp (CMP) [Volume 39, Issue 1, 2024, Pages 55-71]
Roohnia, Mehran
Effect of fermentation pretreatment and extraction on the acoustic properties of Ash wood (Fraxinus excelsior) [Volume 39, Issue 1, 2024, Pages 27-40]
Roohnia, Mehran
Evaluation of the local dynamic modulus of elasticity in wooden tie by the stress wave method [Volume 39, Issue 2, 2024, Pages 133-145]
Roohnia, Mehran
Investigating the relationship between investment strategies, resilience and financial
knowledge on the production growth of wooden furniture industry in the post-Corona era: Moderating impact of government support [Volume 39, Issue 4, 2024, Pages 284-300]
S
Sabzehparvar, Mohammad Reza
Identification of Walnut Tree Leaves Extractives Chemical Composition and
the Effect of Growth Time [Volume 39, Issue 1, 2024, Pages 72-83]
Safdari, Vahid
Effect of fermentation pretreatment and extraction on the acoustic properties of Ash wood (Fraxinus excelsior) [Volume 39, Issue 1, 2024, Pages 27-40]
Salehi, Kamyar
Utilization of Corncob and Poplar (Populus deltoides) in Wood Plastics Nano Composites [Volume 39, Issue 2, 2024, Pages 146-162]
Salehi, Kamyar
Effect of thermo-oil process on biological, physical and mechanical performance of produced
thermo wood [Volume 39, Issue 3, 2024, Pages 236-252]
Sasanian, Sepideh
Glass beads and shell on the physical and mechanical properties of polymer matrix nanocomposites reinforced with glass fibers and beech wood flour [Volume 39, Issue 4, 2024, Pages 313-326]
Shamsian, Mohammad
Investigating the reinforcement of parallel chip lumber (PSL) obtained from reed waste and laminated veneer lumber (LVL) made of spruce with fiber reinforced polymer (FRP) [Volume 39, Issue 2, 2024, Pages 95-110]
Sharifi, Hasan
Preparation of cellulose air filter from bamboo fibers [Volume 39, Issue 4, 2024, Pages 301-312]
Sharifi, Seed Hasan
The use of Thyme extract (Zataria Multiflora) to make antibacterial food packaging paper [Volume 39, Issue 1, 2024, Pages 41-54]
Shurvazi, Haniye
Investigating the reinforcement of parallel chip lumber (PSL) obtained from reed waste and laminated veneer lumber (LVL) made of spruce with fiber reinforced polymer (FRP) [Volume 39, Issue 2, 2024, Pages 95-110]
T
Tabarsa, Taghi
Transparent coatings performance on weathering resistance of preservative-treated wood [Volume 39, Issue 2, 2024, Pages 84-94]
Tabei, Asghar
Glass beads and shell on the physical and mechanical properties of polymer matrix nanocomposites reinforced with glass fibers and beech wood flour [Volume 39, Issue 4, 2024, Pages 313-326]
Taheri, Amir Reza
The effect of marketing capabilities, innovation and learning ability of employees on the performance of wooden office furniture companies [Volume 39, Issue 3, 2024, Pages 163-180]
Tajdini, Ajang
The effect of marketing capabilities, innovation and learning ability of employees on the performance of wooden office furniture companies [Volume 39, Issue 3, 2024, Pages 163-180]
Tajdini, Ajang
Effective indicators for the stability of a stable supply chain model in the cellulosic industry by Vickor method. [Volume 39, Issue 1, 2024, Pages 12-26]
Tajdini, Ajang
Evaluation of the local dynamic modulus of elasticity in wooden tie by the stress wave method [Volume 39, Issue 2, 2024, Pages 133-145]
Tajdini, Ajang
Investigating the relationship between investment strategies, resilience and financial
knowledge on the production growth of wooden furniture industry in the post-Corona era: Moderating impact of government support [Volume 39, Issue 4, 2024, Pages 284-300]
Tamjidi, Abbas
The effect of marketing capabilities, innovation and learning ability of employees on the performance of wooden office furniture companies [Volume 39, Issue 3, 2024, Pages 163-180]
Tamjidi, Abbas
Effective indicators for the stability of a stable supply chain model in the cellulosic industry by Vickor method. [Volume 39, Issue 1, 2024, Pages 12-26]
Torkaman, Javad
Investigating the effect of knot size on the dynamic modulus of elasticity of beech wood (Fagus orientalis Libsky) [Volume 39, Issue 3, 2024, Pages 198-212]
V
Vaysi, Ramin
The Effect of nano-Chitosan, nano-Cellulose and DTPA Spray on the Optical Properties of Paper Obtained from Chemical-mechanical Pulp (CMP) [Volume 39, Issue 1, 2024, Pages 55-71]
Vaysi, Ramin
Identification and Comparison of the Phenolic Chemical Components in Populus nigra and Populus deltoides wood by GC-MS Methods [Volume 39, Issue 2, 2024, Pages 121-132]
Vaysi, Ramin
Identification and comparison of Heavy Metals in the Wood, Bark and Leaves of Planted Plane Tree and Eldar Pine by Using Flame Atomic Absorption Spectroscopic Method [Volume 39, Issue 3, 2024, Pages 253-267]
Vaziri, Vahid
Investigating of physical and mechanical properties of single-layer particleboard made from Prosopis cineraria and industrial wood particles [Volume 39, Issue 4, 2024, Pages 272-283]
Z
Zabihzadeh, Seyd Majid
Preparation of adsorbent from recycle newspaper and removal of metal ions from the pulp and paper mills wastewater [Volume 39, Issue 1, 2024, Pages 1-11]
Zabihzadeh, Seyed Majid
Immersion of paper in emulsified beeswax by ultrasonic method and its effect on paper properties [Volume 39, Issue 4, 2024, Pages 257-271]
Zarey, Hamid reza
Effect of thermo-oil process on biological, physical and mechanical performance of produced
thermo wood [Volume 39, Issue 3, 2024, Pages 236-252]
