Volume 40 (2025-2026)
Volume 39 (2024-2025)
Volume 38 (2023-2024)
Volume 37 (2022-2023)
Volume 36 (2021-2022)
Volume 35 (2020-2021)
Volume 34 (2019-2020)
Volume 33 (2018-2019)
Volume 32 (2017-2018)
Volume 31 (2016-2017)
Volume 30 (2015-2016)
Volume 29 (2014-2015)
Volume 28 (2013-2014)
Volume 27 (2012-2013)
Volume 26 (2011-2012)
Volume 25 (2010-2011)
Volume 24 (2009-2010)
Volume 23 (2008-2009)
Volume 22 (2007-2008)
Volume 21 (2006-2007)
Volume 20 (2005-2006)
Volume 19 (2004-2005)
Volume 18 (2003-2004)
Volume 17 (2002-2003)
Volume 16 (2002-2003)
Volume 15 (2001-2002)
Volume 14 (2001-2002)
Volume 13 (2001)
Volume 12 (2000-2001)
Volume 11 (2000-2001)
Volume 10 (2000-2001)
Volume 9 (2000)
Volume 8 (1999)
Volume 7 (1999)
Volume 6 (1998)
Volume 5 (1998)
Volume 4 (1997)
Volume 3 (1997)
Volume 2 (1996)
Volume 1 (1995)
Keywords = پرس گرم
Number of Articles: 6
The effect of Nano-wollastonite on bending properties and fire resistance characteristics of wood flour/polypropylene composite
Volume 31, Fall 3 , September 2016, , Pages 425-434
Abstract
In this study, effect of nano-wollastonite on fire resistance characteristics of wood flour/polypropylene composite was investigated. The composites samples were manufactured using a dry blend/hot press method. In this study, the dried wood flour of beech as the filler in a 60%, poly propylene as the ... Read MoreEffects of acetylation and press time on heat transfer in particleboard mat from Hornbeam wood (Carpinus betulus)
Volume 27, Issue 3 , September 2012, , Pages 510-521
Abstract
Effects of acetylation and press time on heat transfer to the core layer of particleboard mat in hot pressing were investigated. Particleboard was made using hornbeam particles. Particles were soaked in acetic anhydride for 24 hours to reach three degrees of acetylation (8, 12 and 17%). The treated particles ... Read MoreStudy bhavior creep composites made mixes particle board and medium density Fiber Board-Recycled from HDPE waste and effect water fiber board absorption on Composites
Volume 24, Issue 2 , October 2009, , Pages 194-205
Abstract
In study, the influence of flour content and immersion time in water on the creep behavior of composites made from mixes PB (Particle Board) and MDF (Medium Density Fiber Board) flour and high density polyethylene (HDPE) waste and was investigated. Mixing was done by a twin screw extruder and the sample ... Read MoreA STUDY ON THE LONG TERM WATER ABSORPTION AND THICKNESS SWELLING BEHAVIOR OF WOOD-PLASTIC COMPOSITE PANELS
Volume 20, No., 2 , December 2006, , Pages 255-270
Abstract
Wood -Plastic panels were made from high density polyethylene (as resin) and MDF waste and particleboard waste (as natural fiber) at 60, 70 and 80% by weight fiber loading. Density and dimensions of the panels were 1g/cm3and 35*35*1 cm, respectively. Physical properties of the panels including equilibrium ... Read MoreMECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITE MADE FROM PARTICLEBOARD AND MDF WASTES AND POLYETHYLENE (HDPE) WASTES
Volume 20, No., 2 , December 2006, , Pages 271-284
Abstract
The possibility of producing wood-plastic panels using melt blend method was studied in this research and mechanical properties of the panels including flexural modulus, flexural strength, screw and nail withdrawal resistance, and impact strength were studied.Wood -Plastic panels were made from high ... Read MoreTHE EFFECT OF PRODUCING METHOD ON THE MECHANICAL PROPERTIES OF WOOD PLASTIC COMPOSITES MADE FROM PARTICLEBOARD WASTE
Volume 21, No., 1 , May 2006, , Pages 33-42