Pulp and paper
Farhad Zeinaly; Ali Kazemi Tabrizi; yashar Einollahi; Faraz Asadi Malek Jahan
Abstract
The first act to ameliorate bleaching process is the major elimination of lignin. Actually, the use of oxygen delignification stage before bleaching process is the essential stage in improving bleaching process and reducing process emission. In this study, the effect of conducting oxygen-delignifying ...
Read More
The first act to ameliorate bleaching process is the major elimination of lignin. Actually, the use of oxygen delignification stage before bleaching process is the essential stage in improving bleaching process and reducing process emission. In this study, the effect of conducting oxygen-delignifying process under different process condition, on chemical, physical, mechanical and optical properties of kenaf bast kraft pulp was investigated. The kenaf bast kraft pulp with the kappa number of 22, 1154 ml/g viscosity, and 38% ISO brightness was prepared. Oxygen-delignifying treatments were carried out with three different temperatures of 90, 100 and 110°C, and two oxygen pressures of 5 and 7 bars, with and without magnesium sulfate addition. Results indicated that oxygen delignification treatment led to intense decrease in pulp kappa number, while the pulp viscosity did not change significantly. Results of measuring delignified pulp viscosity showed that the magnesium sulfate addition caused to prevention of pulp viscosity downfall. The increase in reaction temperature had a significant effect on the process improvement, but raising the oxygen pressure did not have a meaningful effect on the process. Also, the pulp brightness was increased about 7%.
Pulp and paper
Farhad Zeinaly; Ahmad Reza Saraeian; Mohammadhadi Aryaei monfared; Ali Kazemi Tabrizi
Abstract
In conducting environmentally friendly processes for pulp production, first step is to reduce the effluent pollution load in each stage, and because the bleaching process is the most polluting stage in the production of pulp, improving it is one of the most important matters. The first act to ameliorate ...
Read More
In conducting environmentally friendly processes for pulp production, first step is to reduce the effluent pollution load in each stage, and because the bleaching process is the most polluting stage in the production of pulp, improving it is one of the most important matters. The first act to ameliorate bleaching process of chemical pulps is the reduction of colored materials, mostly lignin, which enter to the bleaching section. Thus, the use of oxygen delignification stage after pulping and before bleaching process is the key stage in improving process and cleaner production. In this study, the effect of conducting oxygen-delignifying treatment by two kinds of machines, and under different process condition, on chemical, physical, mechanical and optical properties of bagasse soda pulp was investigated. The bagasse soda pulp with the kappa number of 20, 955 ml/g viscosity, and 37% ISO brightness was prepared from Pars Hafttapeh Company. Oxygen-delignifying treatments were carried out with three different temperatures of 90, 100 and 110°C, and two oxygen pressures of 5 and 7 bars, with and without magnesium sulfate addition, by two kinds of machines. Results indicated that oxygen delignification treatment led to intense decrease in pulp kappa number, while the pulp viscosity did not change. Results of measuring delignified pulp viscosity showed that the magnesium sulfate addition caused to prevention of pulp viscosity downfall. The increase in reaction temperature had a significant effect on the process improvement, but raising the oxygen pressure did not have a meaningful effect on the process. The pulp brightness was increased about 4-6%. And also, due to the need of shorter time in order to reach the reaction temperature in the Iranian made machine, pulp delignifying by this machine was a little lower than Quantum machine.
Pulp and paper
Omid Hosseinzadeh; Ahmad Jahan latibari
Abstract
The influence of pulping temperature and time on strength properties of bagasse soda pulp was investigated. Two cooking temperatures)175ْC,185 ْC (and three cooking times (20,30,40 minutes) were selected .The other variables were kept constant at 18 % NaOH and l/w=8. Tensile strength, tear strength ...
Read More
The influence of pulping temperature and time on strength properties of bagasse soda pulp was investigated. Two cooking temperatures)175ْC,185 ْC (and three cooking times (20,30,40 minutes) were selected .The other variables were kept constant at 18 % NaOH and l/w=8. Tensile strength, tear strength index and folding endurance of hand sheets measured . Factorial experiment and randomized block design was used for statistical analysis and DMRT was used for grouping the means. The results indicate that, application of intermediate cooking intensity produced better pulp than more intense pulping at highest pulping time and temperature. However, more intense pulping produced better folding endurance and pulp prepared at 30 minutes cooking time showed better folding endurance than pulp produced at 20 minutes. The highest tear index was obtain at 185 ْC and 20minutes and lowest at 185ْC and 40 minutes. Results indicate that undamaged fibers will product highest tear index. The highest folding endurance was produced at 175 ْC and 30 minutes and the lowest at 185ْC and 30 minutes .Increasing pulping time reduced tensile index and the highest and lowest tensile index obtained at 20 and 40 minutes pulping time respectively.
