Document Type : Research Paper

Authors

• Maryam Rostaei ¹
• Rabi Behroz ²
• Saeid Mahdavi ²

¹ M.Sc., Wood and Paper Sciences and Technology Department, Tarbiat Modares University

² Assistant professor ,Wood and Forest products Research Division, Research Institute of Forests and Rangeland

Abstract

This research was performed to improve the properties of the pulp made of Aspen Deltoides, using antraquinone(AQ) catalizer. Neutral sulfite semichemical (NSSC) method in three efficiency levels of 55, 60, and 65% was applied. Cooking situations was selected as: Specific Temperature (175˚ C) , Time (Variable) , Specific Percentage of Chemicals 14% and Anthraquinone 0.1% . In all stages of cooking, weight ratio of sodium sulfide to sodium bicarbonate was set as 4.5/1. The ratio of cooking liquid to chips was 5/1. The results indicated that AQ causes an increase in efficiency and a significant decrease in Kappa. Researches also indicated that by the use of AQ, strength indexes of the paper such as strength of burst, tearing, tensile, Ring Crush Test and Corrugating Medium Test increases. Optical experiments on hand sheets following addition of AQ, indicated increase in brightness and decrease in opacity.

Keywords

• Aspen Deltoides
• Neutral Sulfite Semi Chemical
• Anthraquinone
• kappa number
• yield
• Strength properties
• Optical properties

Main Subjects

• Pulp and paper