Document Type : Research Paper
Authors
1 Wood and Paper Science Research Division, Research Institute of Forests and Rangelands , Iran,
2 Wood and forest products division, Research Institute of Forests and Rangelands, Agricultural Resear
3 Wood Science & Forest Products Research Division Research Institute of Forests & Rangelands Tehran, Iran
4 Ph.D., Wood and Paper Science Research Division, Research Institute of Forests and Rangelands , Iran,
Abstract
In this study the effect of two variables, (resin content and press time) on properties of MDF was investigated. Levels of each variable was as follow: Resin content (8, 9.5, 11 percent) Press time (4, 5, 6 minutes). The statistical analysis proved that the effect of press time on MOE and MOR was significant. MOE and MOR were the highest at press time of 6 minutes. According to Duncan's test, there aren’t any significant differences between MOE at press time of 5 and 6 minutes. Also the effect of resin content on MOE had significant differences. MOE was the highest at resin content of 11%. There aren’t any significant differences between MOE on resin content at 9.5% and 11% levels. The results showed that effects of press time and resin content had significant differences on IB. IB was the highest at press time of 6 minutes and resin content of 11%. There aren’t any significant differences between IB on resin content at 9.5% and 11%. The effects of press time and resin content had significant differences on thickness swelling after 2 hours. Thickness swelling was the lowest at press time of 6 minutes and resin content of 11%. According to the results of this study optimum combination for MDF production from baggasse includes resin content and press time of 9.5% and 5 minutes respectively.
Keywords
Main Subjects
)