The use of bagasse in the manufacture of reinforced composite reinforced cement-fiber

Golbabaei, Fardad; Salehi, Kamyar; Hajihassani, Reza

doi:10.22092/ijwpr.2019.127186.1567

Document Type : Research Paper

Authors

¹ Wood and forest products division, Research Institute of Forests and Rangelands, Agricultural Research Education and Extension Organization (AREEO), Tehran, Iran

² MSc., Wood and Paper Science Research Division, Research Institute of Forests and Rangelands , Iran

³ PhD, Wood and forest products division, Research Institute of Forests and Rangelands, Agricultural Research Education and Extension Organization (AREEO), Tehran, Iran

https://doi.org/10.22092/ijwpr.2019.127186.1567

Abstract

In this study, the composition of bagasse composite was investigated using different amounts of bagasse particles. Bagasse and cement particles are manufactured at levels (5, 10 and 15%) and percentage of calcium chloride as cement accelerating additive at two levels (3 and 2%) based on cement dry weight. Then, the mixture was poured into a mold measuring 15 8 18 8 8 cm and the excess water was removed from the bottom of the mold and initially weighed 10 kg on the specimens. The specimens were removed from the mold after 48 hours and kept in a glass saturated room at 90% humidity for 14 days and then finally dried in a laboratory environment. The bending strength and physical properties tests were performed on the specimens. The results showed that bagasse particles had a significant effect on bending strength and other physical properties. The bending strength was highest in boards made with 10% bagasse particles.

Keywords

Main Subjects

Composite wood products

References

-ASTM,1979. Standard method of the properties of wood base fiber and particle panel material USA.

- Bilba, K., Arsene , M.A., Ouensanga, A., 2003, sugar cane bagasse fiber reinforced cement composites. Part I . Influence of the botanical components of bagasse on the setting of bagasse/cement composite. Cement and Concrete composites 25: 91-96.

- Ciullo, P.A., 1997. Industrial minerals and their uses. Noyes, United States of America, 640p.

-Doosthosseini, K., 1996. Effect of material added on connection quality of Portland cement with populous particleboard, magazine of Iran Natural Resources 48 (47-58).in Persian

-Doosthoseini, K., 2001. Wood composite materials, volume1 Publications of Tehran university (compilation). in Persian.

-EN 634-2. 2003. Cement-bonded particleboard-Specifications. Part 2: Requirements for OPC bonded particleboard for use in dry, humid and external conditions. Brussels: European Committee for Standardization

-Fernandes, Ec. and Delgado, N., 1999. Cement bonded board from waste water treatment sludge of recycle paper mill. Department of Forest Product and Paper Science in the University of New Brunswick.

-Jenifer, L., 2003. Wood fiber surface treatment level effect on selected mechanical of wood fiber-cement composites. Forest Resources Laboratory.

-Huang Ch., 1998. Study on the manufacturing technology of cement bonded particle board using CCA-treated wood.

-Kolofta, J.L. and Miler, M.L., 1994. Effect of deinking on the recycle potential of papermaking fibers, Pulp and Paper Canada, 95: 8. 41-49. (In Persian)

-Tabarsa, T., Hossieni, M. and Valizadeh, E., 2012. Effect of nano- wollastonite on microscopic, mechanical and physical properties of cement-wood fibers composite

-Mirshokrai, A., 1995. Technology of pulp & paper (translation), Volume 1&2,publication of Payamenoor university. in Persian

-Mohr, BJ. and Kurtis, K.L., 2003. Fiber cement composites for housing construction .Georgia institute of technology.

-Moslemi, A., 1980. A new technique to classify the compatibility of wood with cement. Wood Science and Technology. Volume 24, Number 4, 345-354.

Nasiri, H., Varshoee, A. and Kargarfard, A., 2011. Investigation on the properties of cement-bagasse fiber composite as a structural material, Iranian journal of Wood and Paper Science Research (IJWPR) Article 7, Volume 26, Issue 2 - Serial Number 35, Spring 2011, Page 291-299

- Nazerian, M., Kamyab, M. and Kermaniyan, H., 2016. Application effect of mineral fibers on hydration and properties of gypsum-bonded fiberboard manufactured from kenaf and bagasse fibers. Journal of Wood & Forest Science and Technology, 23 (2): 203-228.

-Stevulova, N., Hospodarova, V. and Junak, J., 2016 Potential utilization of recycled waste paper fibres in cement CHEMINĖ TECHNOLOGIJA. 2016. Nr. 1(67)

- Qixuate, K., 2001, Effect of alkaline accelerator on cement composite properties. Faculty of Civil Engineering.

-Younguist, J.A., 1997. Properties of composite panels. WOOD HANDBOOK. Printed in 1999 by the Forest Products Society FSP catalogue no. 7269. Page 10-26

Iranian Journal of Wood and Paper Science Research

The use of bagasse in the manufacture of reinforced composite reinforced cement-fiber

References

References

Volume 34, Issue 2 - Serial Number 67
August 2019
Pages 302-311

The use of bagasse in the manufacture of reinforced composite reinforced cement-fiber

References

References

Volume 34, Issue 2 - Serial Number 67August 2019Pages 302-311

Volume 34, Issue 2 - Serial Number 67
August 2019
Pages 302-311