-ASTM D882–02., 2002. In Standard test method for tensile properties of thin plastic sheeting. American Society for Testing and Materials, West Conshohocken: PA.
-Andrady, A., 2007. "Ultraviolet radiation and polymers. In Physical properties of polymers handbook, 857-866. Springer.
-ASTM, D., 2005a., 2240, Standard test method for rubber property-Durometer hardness.
-ASTM, D., 2005b., 4329-05. Standard Practice for Fluorescent UV Exposure of Plastics.
-ASTM, H., D2244–Standard Test Method for Calculation of Color Differences from Instrumentally Measured Color Coordinates.
-Beg, M.D.H. and Pickering, K.L., 2008. Accelerated weathering of unbleached and bleached Kraft wood fibre reinforced polypropylene composites. Polymer Degradation and Stability 93 (10): 1939-1946.
-Butylina, S., Hyvärinen, M. and Kärki, T., 2012a. A study of surface changes of wood-polypropylene composites as the result of exterior weathering. Polymer Degradation and Stability 97 (3): 337-345.
-Butylina, S., Hyvärinen, M. and Kärki. T., 2012b. Weathering of wood-polypropylene composites containing pigments. European Journal of Wood and Wood Products 70 (5): 719-726.
-Chang, B.P., Mohanty, A.K. and Misra, M., 2020. Studies on durability of sustainable biobased composites: a review. RSC Advances 10 (31): 17955-17999.
-Chaochanchaikul, K., Rosarpitak, V. and Sombatsompop, N., 2013. Photodegradation profiles of PVC compound and wood/PVC composites under UV weathering. Express Polymer Letters 7 (2).
-Clausen, C.A., Green, F. and Kartal, S.N., 2010. Weatherability and leach resistance of wood impregnated with nano-zinc oxide. Nanoscale research letters 5 (9): 1464-1467.
-Du, H., Wang, W., Wang, Q., Zhang, Z., Sui, S. and Zhang, Y., 2010. Effects of pigments on the UV degradation of wood‐flour/HDPE composites. Journal of applied polymer science 118 (2): 1068-1076.
-Fabiyi, J.S. and McDonald, M., 2014. Degradation of polypropylene in naturally and artificially weathered plastic matrix composites. Maderas. Ciencia y tecnología 16 (3): 275-290.
-Friedrich, D. and Luible, A., 2016. Investigations on ageing of wood-plastic composites for outdoor applications: A meta-analysis using empiric data derived from diverse weathering trials." Construction and Building Materials 124: 1142-1152.
-Farahani, M. and Banikarim, F., 2013. Effect of nano-zinc oxide on decay resistance of wood-plastic composites. BioResources 8 (4): 5715-5720.
-Fei, P., Xiong, H., Cai, J., Liu, C. and Yu, Y., 2016. Enhanced the weatherability of bamboo fiber-based outdoor building decoration materials by rutile nano-TiO2. Construction and Building Materials 114:307-316.
-Homkhiew, C., Ratanawilai, T. and Thongruang, W., 2014. Effects of natural weathering on the properties of recycled polypropylene composites reinforced with rubberwood flour. Industrial Crops and Products 56: 52-59.
-Kaymakci, A., 2020. Effect of sepiolite clay nanofibers on physical, mechanical, and thermal properties of wood-plastic nanocomposites. Journal of Thermoplastic Composite Materials
-Matuana, L.M., Jin, S. and Stark, N.M., 2011. Ultraviolet weathering of HDPE/wood-flour composites coextruded with a clear HDPE cap layer. Polymer Degradation and Stability 96 (1): 97-106.
-Matuana, L.M. and Kamdem, D.P., 2002. Accelerated ultraviolet weathering of PVC/wood‐flour composites. Polymer Engineering & Science 42 (8): 1657-1666.
-Muasher, M. and Sain, M., 2006. The efficacy of photostabilizers on the color change of wood filled plastic composites. Polymer degradation and stability 91 (5): 1156-1165.
-Nguyen, T.V., Dao, P.H., Nguyen, T.A., Dang, V.H., Ha, M.N. and Nguyen, P., 2020. Photocatalytic degradation and heat reflectance recovery of waterborne acrylic polymer/ZnO nanocomposite coating. Journal of Applied Polymer Science 137 (37): 49-116.
-Pandey, K.K. and Pitman, A., 2003. FTIR studies of the changes in wood chemistry following decay by brown-rot and white-rot fungi. International biodeterioration & biodegradation 52 (3): 151-160.
-Rajakumar, K., Sarasvathy, V., Chelvan, A.T., Chitra, R. and Vijayakumar, C.T., 2009. Natural weathering studies of polypropylene. Journal of Polymers and the Environment 17 (3): 191-202.
-Rangavar, H., Taghiyari, H.R., Oromiehie, A., Gholipour, T. and Safarpour, A., 2017. Effects of nanoclay on physical and mechanical properties of wood-plastic composites. Wood Material Science & Engineering 12 (4): 211-219.
-Rasouli, D., Dintcheva, N.T., Faezipour, M., La Mantia, F.P., Farahani, M. and Tajvidi, M., 2016. Effect of nano zinc oxide as UV stabilizer on the weathering performance of wood-polyethylene composite." Polymer Degradation and Stability 133: 85-91.
-Saunders, K.J., 2012. Organic polymer chemistry: an introduction to the organic chemistry of adhesives, fibres, paints, plastics and rubbers: Springer Science & Business Media.
-Stark, N.M. and Matuana, L.M., 2007. Characterization of weathered wood–plastic composite surfaces using FTIR spectroscopy, contact angle, and XPS. Polymer Degradation and Stability 92 (10): 1883-1890.
-Stark, N.M. and Matuana, L.M., 2006. Influence of photostabilizers on wood flour–HDPE composites exposed to xenon-arc radiation with and without water spray. Polymer degradation and stability 91 (12): 3048-3056.
-Tripathi, D., 2002. Practical guide to polypropylene: iSmithers Rapra Publishing.
-Whelan, A. and Whelan, T., 1994. Polymer technology dictionary: Springer Science & Business Media.
-Williams, R.S., 2005. Weathering of wood. Handbook of wood chemistry and wood composites 7: 139-185.
-Xuan, L., Han, C., Wang, D., Cheng, W. and Li, Q., 2017. Effect of surface-modified TiO2 nanoparticles on the anti-ultraviolet aging performance of foamed wheat straw fiber/polypropylene composites. Materials 10 (5): 456.
-Zhang, Z.M., Du, H., Wang, W.H. and Wang, Q.W., 2010. Property changes of wood-fiber/HDPE composites colored by iron oxide pigments after accelerated UV weathering. Journal of Forestry Research 21 (1): 59-62.
)