Investigation of antibacterial properties of melamine coatings containing chitosan  and clay nanofibers

Elyasy, Abdolah; Tabarsa, Taghi; Mansouri, Hamidreza; Shakeri, Alireza

doi:10.22092/ijwpr.2022.124689.1513

Document Type : Research Paper

Authors

¹ , PhD student,Wood Composite Products of Gorgan University of Agricultural Sciences and Natural Resources, Gorgan, Iran,

² Master of Wood Composite Products of Gorgan University of Agricultural Sciences and Natural Resources, Gorgan, Iran

³ Associate professor and engineer of wood and paper industry of Zabol University, Iran

⁴ Associate Prof., Industrial Polymer, Department of Chemistry, Tehran University, Tehran, Iran

https://doi.org/10.22092/ijwpr.2022.124689.1513

Abstract

Researches on antimicrobial coatings to protect surfaces from remnants of microorganisms on the surfaces in the environment that can lead to the spread of diseases in human societies, has attracted a remarkable interest. In this regard, the effects of chitosan nanofibers and clay nanoparticles (sodium montmorillonite) on antibacterial properties of melamine coatings were investigated. Urea formaldehyde and melamine formaldehyde resins were prepared by adding nanomaterials to each of them 1% by weight using a mechanical-ultrasound mixing method. The distribution and presence of nanomaterials in the resin and the antibacterial properties of melamine coatings were studied. To investigate the antibacterial properties of melamine coatings prepared, two type Gram-positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli) were used. The results of X-ray diffraction and field-emission electron microscopy images, confirmed the proper distribution of chitosan nanofibers and clay nanoparticles in the polymer. The results also showed that by adding nanomaterials to the resins used in the melamine coating, the antibacterial properties of the coatings can be remarkably improved. On the other hand, the study of antibacterial properties of coatings showed that chitosan nanofibers had stronger antibacterial properties than clay montmorillonite Na⁺ nanoparticles.

Keywords

20.1001.1.17350913.1401.37.3.7.6

References

-Afra, E., Malek, M.R. and Dehghani Firouz Abadi, M.R., 2018. Investigating Clay and Nano-Clay Performance in Healthy Paper for Antibacterial, Physical and Mechanical Properties. Iranian Journal of Forest and Wood Science and Technology, 25(1):19-32

-Edraki, M. and Zarei, D., 2018. Evaluation of thermal and antimicrobial behavior of montmorillonite Nano-Clay modified with 2-mercap to benzothiazole. Journal Nano Analysis, 5(1): 26-35.

-Friedman, M. and Juneja V.K., 2010. Review of antimicrobial and anti-oxidative activities of chitosan in food. Journal of Food Protective, 73(9): 1737-1761.

-Gabriel, G.T., Som, A., Madkour, A.E., Eren, T. and Tew, G.N., 2007. Infectious disease: connecting innate immunity to biocide polymers, Journal of Science Engineering, 57: 28-64.

-Hatam, A., Firouzabadi, M.D. and Resalati, H., 2017. Surface chemistry of gravure printed decor paper and adhesion of melamine formaldehyde resin coatings. Bio Resources, 12(2): 4239 – 4258.

-Jahromi, M.A.M., Rajaei, H., Fasihi, M., Ahmadi, k. and Mirnejad, R., 2015. Evaluation of antibacterial effect of chitosan nanoparticles loaded with Curcumin. Journal of Fasa University of Medical Sciences. 5(1): 134-141.

-Kandelbauer, A. and Teischingr, A., 2009. Dynamic mechanical properties of decorative paper impregnated with melamine formaldehyde resin. European Journal of wood and wood products, 68: 179-187.

-Kaya, M., Baran, T. and Asan-Ozusiglam, M., 2015. Extraction and characterization of chitin and chitosan with antimicrobial and antioxidant activities from cosmopolitan orthoptera species, Bioprocess Engineering, 20(1): 168 – 179.

-Lafi, S.A. and Al-Dulaimy, M.R., 2011. Antibacterial Effect of some mineral clays in vitro. Egypt.Acad.J.biolog.sci, 83(1): 75-81.

-Lie, H., Du, G., Pizzi, A. and Celzard, A., 2008. Influence of Nano-Clay on urea formaldehyde resins for wood adhesives and its model. Journal of Applied Polymer Science, 104: 2442-2451.

-Ngmviriyavong, P., Thananuson, A., Pankongadisak, P., Tanjak, P. and Janvikul, W., 2010. Antibacterial hydrogels from chitosan derivatives. Journal Met Mater Miner, 20(3): 113-117.

-Pizzi, A. and Mittal, k.L., 2003. Handbook of adhesive technology. CRC Press, Marcel Dekker, New York.PP, 1063.

-Posner, J.D., 2009. Engineered Nanomaterial: where they go, nobody knows, Journal of Nano Today. 4(2): 114-115.

-PourKarim Dodange, H., Jalali Torshizi, H., Roudi, H.R. and Ramezani, O., 2016. Operation of Biopolymer system of cellulose and chitosan nanofibres on the properties of pulp and paper recycled from old knurl corrugated boxes. Iranian Journal of Wood and Paper Industry of Iran, 7(2): 297-309.

-Rafiei, S., Kermanian. H., Rasouli Garmaroudi, E. and Ramezani, O., 2017. The effect of the type and composition of resin on the melamine paper. Iranian Journal of Wood and Paper Industry of Iran, 8(1):

-Singh, V., Singh, L. and Singh, S.V., 2017. Antibacterial study of Melamine – Formaldehyde (MF), Modified MF and Grafted Mf resin. International Journal of Innovative Research Explores, SNS No: 23476060.193-198.

-Tasooji, M., Tabarsa, T. and Mohamadi, A., 2010. Manufacturing of wheat straw particle boards based on the mixture of mf. Iranian Journal of Wood and Paper Research, 25(2): 291-301.

-Uday, K., Niranjan, K. and Manabendra, M., 2010. Vegetable oil based highly branched polyester/clay silver nanocomposites as antimicrobial surface coating materials. Journal of Progress in Organic Coatings, 68: 265-273.

-Vigel, S. and Gindel,W., 2014. Application potential of nanocellulose in the wood industry, Workshop, Science and Uses of Nano Cellulose Foams and Films, March 5 – 6, Biocomposites Centre, UK.

-Vilar, J.C., Ribeaux, D.R., Silva, C.A.A. and Takaki, G.M., 2016. Physicochemical and antibacterial properties of chitosan extracted from waste shrimp shells. International Journal of Microbiology, 5127515: 1-7.

-Vondruskova, H., Slamora, R., Trckova, M., Zraly, Z. and Pavlik, I., 2010. Alternative to antibiotic growth promoters in prevention of diarrhea in weaned piglets. Vaterinarni Medician, 55(5): 199-224.

-Wardani, G. and Mahmiah Sudjarwo, S.A., 2018. In vitro antibacterial activity of chitosan nanoparticles against mycobacterium tuberculosis. Pharmacognosy Journal, 10(1): 161-166.

-Xian, D., Semple, K.E., Haghdan, S. and Smith, G.D., 2013. Properties and wood bonding capacity of Nano clay – modified urea and melamine formaldehyde resin. Wood and Fiber Science, 45(4): 1-13.

-Yonesi Kordkhili, H., Kazemi Najafi, S. and Behrouz, R., 2016. Effect of clay nanoparticles on physical, chemical, structural and thermal properties of urea formaldehyde adhesive. Forest and Wood Products, Journal of Natural Resources of Iran, 69(3): 561-570.

Iranian Journal of Wood and Paper Science Research

Investigation of antibacterial properties of melamine coatings containing chitosan and clay nanofibers

References

References

Volume 37, Issue 3 - Serial Number 80
September 2022
Pages 239-250

Investigation of antibacterial properties of melamine coatings containing chitosan and clay nanofibers

References

References

Volume 37, Issue 3 - Serial Number 80September 2022Pages 239-250

Volume 37, Issue 3 - Serial Number 80
September 2022
Pages 239-250