Document Type : Research Paper

Author

Assistant Professor, College of Resources, University of Mazanderan, Sari

Abstract

This research was conducted to investigate the posibility of producing particleboards using surface activation method of  P. deltoides particles and then using  cross-linking agents to bond wood particles. At  first, nitric acid as an oxidative agent at different proportion including 0, 3, 4.5 & 6 percent (based on OD weight of wood) and two assembly times of 0 and 1 hour was used. Black liquor at two amounts of 5 and 7 percent was used as cross-linking agent. The results indicates that using 6% nitric acid and 7% liquor had the best performance and that, the assembly time of 1 hour had negative effect on all properties. The ATR spectrum of treated samples showed the increase in the absorbtion rate at 1740 cm-1  related to COOH group as compared with control samples.  In addition, the spectrum indicated that increasing oxidation increase absorbtion rate of COOH group.
 

Keywords

- دوست حسینی، ک.، 1380. فناوری تولید و کاربرد صفحات فشرده چوبی، انتشارات دانشگاه تهران .
- میرشکرائی ، س. ا. ،1373، شیمی و تکنولوژی چسب چوب (ترجمه) ، مرکز نشر دانشگاهی .
- میرشکرائی ، س. ا.، یاوری ،ع.،1371. کاربرد طیف سنجی در شیمی آلی (ترجمه)، مرکز چاپ و انتشارات دانشگاه پیام نور.
-Avella, T. , B.de. lhoneux.1984. self-bonding of wood particles : influence of addition of synthetic resins, Journal of Applied Polimer Science, 40 : 203-207.
-Bredenberg, J. B-son, Christopher, P. Masuku, A. Vuori, 1989, Thermal reaction of the bonds in lignin, Holzforeschung, 43(2): 115 – 120.
-Charles, C.,1986, Wood particleboard and flakboard: types, grades and uses,Madison Wl: U.S. Department of Agriculture, Forest service, Forest products laboratory.
-Ellis,S., L.Paszner, 1994 , Activated selfbonding of wood and agricultural residues, Hollzforeschung, 48(suppl), 82 – 90.
-Fengel,D.,G. Wegener,1989,Wood Chemistry Ultrastrastructure Reactions,Walter de Gruyter and Co.,Berlin.
-Garrote,G.,H.Dominguez,J.C.Parajo, 1999, Hydrothermal processing of lignocellulosic materials, Hols als Roh-Und Werkstoff 57, 191 – 202.
-Gomez – Bueso,J.,M.Westin, R.Torgilsson, 1999,  Composites made from acetylated lignocellulosic fibers of different origin, Holz als Roh – Und Werkstoff 57, 178 – 184.
Kiguchi,M., K. Yamamoto, 1992, Chemical modification of wood surfaces by etherification III. Some properties of self-bonding bended benzylated particleboard, Journal of the japon wood reasearch society, 38(2), 150 – 158.
-Manzour-ol-ajdad, S.M., 2000. Fundamental study of the correlation between N2O4 oxidation of bagasse and aspen fibres and the mechanical strength of sheets, Ph.D. thesis , Univ. of Quebec.
-Matuana L.M., J.J. Balatinecz, R.N.S. Sodahi, C.B. Park, 1999.  Surface characterization of esterified cellulosic fiber by XPS and FTIR  spectroscopy, Wood science and technology, 191-201.
-Murmanis,L., 1983, Microscopy of asid-activated bonding in wood, Wood and fiber science, 15(3), 203 – 211.
-Mutuana,L.M., J.J.Bulatinecz, R.N.S.Sodhi, C.B.Park, 1997, Surface Characterization of esterified cellulosic fibers by xps and FTIR spectroscopy, Wood science and technology, 191 – 201.