Volume 39 (2024-2025)
Volume 38 (2023-2024)
Volume 37 (2022-2023)
Volume 36 (2021-2022)
Volume 35 (2020-2021)
Volume 34 (2019-2020)
Volume 33 (2018-2019)
Volume 32 (2017-2018)
Volume 31 (2016-2017)
Volume 30 (2015-2016)
Volume 29 (2014-2015)
Volume 28 (2013-2014)
Volume 27 (2012-2013)
Volume 26 (2011-2012)
Volume 25 (2010-2011)
Volume 24 (2009-2010)
Volume 23 (2008-2009)
Volume 22 (2007-2008)
Volume 21 (2006-2007)
Volume 20 (2005-2006)
Volume 19 (2004-2005)
Volume 18 (2003-2004)
Volume 17 (2002-2003)
Volume 16 (2002-2003)
Volume 15 (2001-2002)
Volume 14 (2001-2002)
Volume 13 (2001)
Volume 12 (2000-2001)
Volume 11 (2000-2001)
Volume 10 (2000-2001)
Volume 9 (2000)
Volume 8 (1999)
Volume 7 (1999)
Volume 6 (1998)
Volume 5 (1998)
Volume 4 (1997)
Volume 3 (1997)
Volume 2 (1996)
Volume 1 (1995)
Chemical conversion
Preparation of adsorbent from recycle newspaper and removal of metal ions from the pulp and paper mills wastewater

Khadijeh Khorram Margavi; Noureddin Nazarnezhad; Seyd Majid Zabihzadeh

Volume 39, Issue 1 , March 2024, , Pages 1-11


  Background and objectives: Contamination in pulp mill wastewater and subsequently surface and underground water sources contamination with heavy metals is one of the most important problems which threatens the health of human being and other creatures. These metals penetrate and pollute the soil and ...  Read More

Pulp and paper
The use of Thyme extract (Zataria Multiflora) to make antibacterial food packaging paper

Amir Hosein Ghasemi; Noureddin Nazarnezhad; Shaghaygh Rezanezhad; Seed Hasan Sharifi

Volume 39, Issue 1 , March 2024, , Pages 41-54


  Background and objectives: Some medicinal herb extracts have the antibacterial capability. On the other hand, herb extract is one of the organic, natural, and environmentally friendly substances. In recent years, the production of environmental and safe packaging materials has attracted the attention ...  Read More

Nano composite
Production and investigation of cellulose nanocrystals properties obtained from cotton linter and their use as a reinforcing agent in polycaprolactone nanocomposite films

Bardia Sodeifi; Seyed Hassan Sharifi; Noredin Nazarnezhad

Volume 38, Issue 3 , September 2023, , Pages 225-236


  Development of active and biodegradable packaging is possible by coating biopolymers on packaging materials. In this research, in order to improve the mechanical and barrier properties of polycaprolactone polymer films, cellulose nanocrystals obtained from alpha-cellulose of cotton linter were added ...  Read More

The effect of chitosan coating on the strength and barrier properties of liner paper

Noraldin Nazarnezhad; mahin avrand; Hosin Resalati

Volume 38, Issue 1 , March 2023, , Pages 37-47


  One of the problems of papers and cardboards in the packaging industry is the poor resistance to water, gas, and oil penetration. Nowadays, much research have been done on the use of biodegradable films and coatings based on polysaccharides to solve this problem. Chitosan is one of these polysaccharides ...  Read More

The effect of kappa factor changes in chlorine dioxide bleaching on the dissolution of pulp from OCC recycled fibers in sodium hydroxide / urea solvent

Negin Ghahrani; Noradin Nazarnezhad; Omid Ramezani; Ghasem Asadpour

Volume 37, Issue 2 , May 2022, , Pages 166-176


  Regeneration of cellulose by direct solvent dissolution essentially involves the pretreatment of cellulose with a solvent for swelling the cellulose chains and weakening the cellulose molecules bonds. Aqueous solutions based on sodium hydroxide (NaOH) are low cost, non-volatile, non-toxic, environmentally ...  Read More

The effect of kappa factor on chlorine dioxide bleaching sequence on the properties of dissolving pulp from recycled fibers (OCC)

Negin Ghahrani; Noraldin Nazrneghad; Omid Ramezani; Ghasem Asadpour

Volume 37, Issue 1 , April 2022, , Pages 28-37


  One of the common applications of cellulose is dissolving pulp producing that requires high purity. Different cellulose sources are used to produce dissolving pulp. Due to Deforestation and lack of agricultural land and problems with cultivation, the use of wood and non-wood sources of cellulose is declining. ...  Read More

Use of magnetic nano bio composites prepared from fibers, nanocrystalline cellulose and carboxy methylcellulose in adsorption of heavy metals )Nickel and Lead(

shaghayegh rezanezhad; Hossein Resalati; Seyed Majid Zabihzadeh

Volume 35, Issue 4 , January 2021, , Pages 332-347


  Biodegradable magnetic nanocomposites of cellulose have been widely used in adsorption of heavy metals from water. In this research, nano magnetic papers were produced by commercial craft long fiber (NMP), magnetic fibers with 1% gluconic acid (NMP / GA 1%), nanocrystalline cellulose (MNCC) as well as ...  Read More

The dual function of chitosan on improving the retention of iron oxide nanoparticles and the mechanical strength of magnetic paper produced by in situ synthesis

shaghayegh rezanezhad; Hossein Resalati; Seyed Majid Zabihzadeh

Volume 35, Issue 2 , July 2020, , Pages 205-217


  The most important challenges of using minerals and fillers in the papermaking process are low retention and sharp reduced paper strength properties. In this research, magnetic papers were synthesized using commercial kraft fibers and iron salts. Nano-iron oxide has the same performance as fillers, as ...  Read More

Pulp and paper
Investigation of mechanical and optical properties of papers coated with Polycaprolactone - Nanocrystalline cellulose - zinc oxide Nanoparticle

Bardia Sodeifi; noureddin Nazarnezhad; Seyed Hassan Sharifi

Volume 34, Issue 1 , April 2019, , Pages 27-38


  DOR:98.1000/1735-0913.1398. In this research, the effect of coating with Polycaprolactone (PCL), nanocrystalline Cellulose (NCC) and zinc oxide Nanoparticle (ZnO NP) and their blend were investigated on the mechanical and optical properties. First, coating materials with specific ...  Read More

Pulp and paper
Use of Central Composite Design for Optimization of ultrasonic pre-treatment parameters on chemical deinking of old newspaper

Seyed Hassan Sharifi; nouredin Nazarnezhad

Volume 33, Issue 4 , February 2019, , Pages 489-500


  To reuse recycled cellulosic fibers in paper production, contaminated particles and other impurities of the fibers can be greatly removed using a de-inking stage which is considered as a supplementary step in waste paper recycling technology. The effect of using ultrasonic pretreatment on the deinking ...  Read More

Composite wood products
The usage effect of nano-alumina on the mechanical and surface properties of HDF made of oxidized fibers

Saeb Shabanpour; Noraldin Nazarnezhad; Maryam Ghorbani

Volume 33, Issue 2 , July 2018, , Pages 196-204


  Current research was conducted to investigate the effect of nano Alumina modification on the mechanical and Surface properties of High-Density Fiberboard (HDF) made from oxidized fibers. Surface activation of fiber was done with 40% nitric acid. After fibers gluing with urea-formaldehyde (7% and 9% based ...  Read More

Pulp and paper
The effect of water softening calcium carbonate on the fluting paper properties from OCC and NSSC

Mina Akbari; Ghasem asadpour; noorodin nazarnezhad

Volume 32, Issue 1 , April 2017, , Pages 118-130


  As a result of water treatment and during the water softening and hardness reducing process, calcium carbonate deposits with other impurities produced, collected and buried as mineral sludge. This study was done to investigate the effect of using calcium carbonate filler (as a byproduct of water treatment ...  Read More

Pulp and paper
Comparing the performance of cationic starch, corn and tapioca to improve the strength characteristics of paper from old corrugated containers

Noradin Nazaneghad; seid najeh Mosavi; Seid Majid Zabihzadeh

Volume 31, Issue 4 , January 2017, , Pages 662-670


  Abstract The aim of this study is investigate the effect of Tapioca and Corn cationic starch on the mechanical characteristics of paper from old corrugated containers. The paper recycling decrease its properties and affected on the paper quality. For promoting these fibers may be effective the use of ...  Read More

Pulp and paper
Preparation of nano-cellulose from cladophora, a fibrous algae, utilizing it at improving the strength properties of CMP pulp.

fatemeh asadi; Noradin Nazarneghad; Ghasem Asadpoor atoeei

Volume 31, Issue 4 , January 2017, , Pages 695-702


  Nowdays, algae considering marine ecosystem are regarded as producers and the first continuum that receives solar energy. Hence, they ensure the needed energy for the aquatic organism living. In global herbal division, algae have 1800 genus and 21000 types. Because of their presence in air rather than ...  Read More

Pulp and paper
Depended pH behavior of chitosan on surface modified fibers of Kraft pulp

Noraldin Nazarnezhad; Naser Rasol pour hedayati; Omid Ramazani

Volume 30, Fall 3 , August 2015, , Pages 513-524


  Chitosan is known as a natural polymer which improves strengths of papers. So, in this study investigated improvement of chitosan absorption on modified craft fibers and increase its efficiency. The effects of chitosan were experimented in three levels of 0%, 0.75% and 1.25% on modified kraft fibers ...  Read More

Physics and Mechanical Wood
The effect of oxidation of wood particles on the usage quantity of adhesive and study the physical and mechanical properties of single layer particle board

parisa azari; mohammad talaeipour; noorodin nazarnezhad; behzad bazyar

Volume 29, Summer 2 , August 2014, , Pages 220-229


  In this study the effect of surface oxidation of wood particles in order to reducing amount of adhesive for making single layer particleboard was investigated. Oxidation of wood particles cause to form carboxylic groups and free phenolic radicals that lead to activate the surface of wood particles for ...  Read More

Evaluation of antioxidant properties and total phenolic and flavonoids content of Eucalyptus camaldulensis and Pinus sylvestris bark

Salehe Nazari; Noraldin Nazarnezhad; Mohammad Ali Ebrahimzadeh

Volume 28, Issue 3 , October 2013, , Pages 522-533


  Plants are a rich source of phenolic compounds as natural antioxidants. Antioxidants are the main factors in neutralizing free radicals and prevent the spread of diseases and destruction of many foods. These compounds are extractable from the bark of Eucalyptus camaldulensis and Pinus sylvestris trees. ...  Read More