Chemistry of wood
Ramin Vaysi
Abstract
Background and aim: As a result of population growth, paper and wood products consumption has increased, and restrictions on using forest wood raw materials initiated the utilization poplar trees as fast-growing spices. The aim of this study was to focus on identification and comparison of the ...
Read More
Background and aim: As a result of population growth, paper and wood products consumption has increased, and restrictions on using forest wood raw materials initiated the utilization poplar trees as fast-growing spices. The aim of this study was to focus on identification and comparison of the phenolic chemical components in poplar woods (Populus nigra and Populus deltoides).
Materials and methods: In this study, three trees from each poplar tree were randomly felled in plantation near Nowshar, Iran. Then three discs were cut from each log. At first, wood was grounded and then wood flour extractive were measured using TAPPI standard procedure. Wood flour was extracted by acetone and extractives residue was added to BSTFA reactor and samples were kept in constant temperature bath at 70oC for an hour. The extractive samples were then analyzed by GC/MS. The compounds were identified using GC diagram which shows abundance and retention time of each compound, and calculation of quartz index and Adams table.
Results: The result of GC-MS showed that there exist 68 and 105 compounds in wood of Populus nigra and Populus detoides, respectively. di-Limonene (30.26%), bis (2-ethylhexyl) phthalate (10.07%), Gamma-Sitosterol (1.06%), Hexadecanoic acid (2.0%), gamma-Terpinene (4.02%) and 4-Hydroxy-Benzoic acid (3.62%) were the most important compounds in wood of Populus detoides. There were the Limonene (25.62%), Anymol (5.29%), gamma-Terpinene (3.38%), 1, 2-Benzandicarboxylic acid (2.00%) and bis (2-ethylhexyl) phthalate (0.68%) as the most important compounds in wood of Populus nigra.
Conclusion: The gas chromatographs showed that Limonene, Benzene methanol, alpha-Terpineol, beta-Bisabolene, Hexadecanoic acid and bis (2-ethylhexyl) phthalate were the 7 common compounds in the wood of Populus nigra and Populus deltoides. These compounds can play an important role in the durability and consumption of these woods.
Chemistry of wood
Ramin Vaysi; Majid Kiaei; Sayed Sajad Ashrafi; Amin Jourbandian
Abstract
The aim of this study was accomplished on identification and comparison of the phenolic chemical components in wood of Siberian elm, Common elm and Mountain elm tree. For this purpose, the samples were chosen randomly from of elm trees in Nowshahr's forest region. Then, flour and ash were provided from ...
Read More
The aim of this study was accomplished on identification and comparison of the phenolic chemical components in wood of Siberian elm, Common elm and Mountain elm tree. For this purpose, the samples were chosen randomly from of elm trees in Nowshahr's forest region. Then, flour and ash were provided from these woods of species (separate) by TAPPI standards. After samples prepared, samples were injected to the GC/MS device for it analysis. Identification of compounds was done by retention time of each compound, calculation of Quats index and Adams table. The result of GC-MS showed that there were 116, 41 and 18 compounds in wood of Siberian elm, Common elm and Mountain elm tree, respectively. That 5-Hydroxy-calamenen (21.23%), 1-Naphthalen carboxylic acid (15.41%), Naphthalene (0.96%) and phthalate (1.00%) were the most important compounds in wood of Siberian elm. The 5,6,7,8-tetrahydro-2,5-dimethyl-8-(1-methylethyl)-1-Naphthalenol(18.59%), Gamma-Sitosterol (13.44%), bis (2-ethylhexyl) phthalate (12.28%) and 1-Naphthalen carboxylic acid (5.73%) were the most important compounds in wood of Common elm, too. There were the bis (2-ethylhexyl) phthalate (93.40%), 4-(N-Isopropylamino)-6-phenyl (1.89%), 5, 6, 7, 8-tetrahydro-1-naphthalenol (1.80%) and 8-methoxy-1-acetonaphthone (0.27%) as the most important compounds in wood of Mountain elm tree. In addition, the results showed that 9,12-Octadecanoic acid, Hexadecane, Dodecan, Tetradecan, 1-Naphthalen carboxylic acid and bis (2-ethylhexyl) phthalate were the 6 common compounds in the wood of Siberian elm and Common elm tree. There were the Qoinindolin, Tetradecan, Hexadecanoic acid and bis (2-ethylhexyl) phthalate were the 4 common compounds in the wood of Siberian elm and Mountain elm tree. There were the Tetradecan, Hexadecanoic acid and bis (2-ethylhexyl) phthalate were the 3 common compounds in the wood of Common elm and Mountain elm tree, too. The gas chromatographs showed that Tetradecan and bis (2-ethylhexyl) phthalate were the 2 common compounds in three spices of elm trees.
Ramin Vaysi; Seyed Eshagh Ebadi; Sayed Sajad Ashrafi
Abstract
Sycamore tree (Platanus orientalis) is one of the species that planted in parks and urban green spaces and forests region of Tehran and other cities in Iran. The aim of this study was to identify and compare the phenolic chemical components in wood and bark of planted sycamore tree. In this study, ...
Read More
Sycamore tree (Platanus orientalis) is one of the species that planted in parks and urban green spaces and forests region of Tehran and other cities in Iran. The aim of this study was to identify and compare the phenolic chemical components in wood and bark of planted sycamore tree. In this study, three trees were randomly selected and felled in planted forest region of Tehran. Three disks were prepared from each tree and according to TAPPI standard tests, first wood flour and then the extractive (%) were separated from wood flour using acetone solvent. To identify of extractives, about 1mg extractives was mixed with 30 microliters BSTFA and the samples were analyzed using a gas chromatograph connected to mass spectrometry (MS) with a detector. Samples were then injected into the injection section of GC/MS using a Hamilton syringe. The compounds identification was performed using GC diagrams, abundance and retention time of each compound, calculation of quartz index and Adams table. The results showed that the average of extractives in wood and bark of the planted oriental plane tree were 3.6 and 16.6 percent, respectively. GC-MS results showed that 17 specification compounds were found in the plane wood. Furthermore, Hexadecanoic acid (22.18%), Heptadecan-8-carbonic acid (15.24%), and 1, 2-Benzenedicarboxylic acid (12.08%) were the most important compounds. The 41 compounds were identified in the plane bark that 9-Octadecanoic acid (19.88%), n-Hexandecanoic acid (16.41%), 9, 12-Octadecanoic acid (9.66%) and Gamma-Sitosterol (2.09%) were the most important compounds. In addition, the results showed that 9-Octadecanoic acid, Hexadecane, Dodecan, Tetradecan, Eicosan, Octadecane, and Decane were the 6 common compounds in the wood and bark of sycamore tree, as well
Ramin Vaysi; Behrooz Malekian; Masih Masoudifar
Abstract
The aim of this study was accomplished on identification and comparison of chemical compounds in heart wood and bark of mulberry tree. For this purpose, the samples were chosen randomly from heart wood and bark of mulberry tree in Nowshahr's forest region. Then, flour and ash were provided from heart ...
Read More
The aim of this study was accomplished on identification and comparison of chemical compounds in heart wood and bark of mulberry tree. For this purpose, the samples were chosen randomly from heart wood and bark of mulberry tree in Nowshahr's forest region. Then, flour and ash were provided from heart wood and bark of mulberry tree by TAPPI standards. For measured metallic ions, first the mineral compound of ash dissolved by 65% nitric acid and for its identified by atomic absorption method. The results showed that zinc ion in heart wood of mulberry tree was more than its bark, but manganese and iron ions were lower and its cupper ion was same. Then extractives were separated from wood flour by acetone and extractives residue transferred to glass vial and was added BSTFA reactive agent to it. After samples prepared, samples were injected to the GC/MS device for it analysis. Identification of compounds was done by retention time of each compound, calculation of Quats index and Adams table. The result of GC-MS showed that there are 30 compounds in bark of mulberry tree, that beta-Tocopherol(40.86%), bis (2-ethylhexyl)phthalate(11.2%), 9,12-Octadecadienoic acid(9.12%) and Triphenyl phosphine(9.82 were important components. 93 components identified heart wood of mulberry tree that resorcinol(79.47), methyl diphenyl methane(12.06%), p-xylene(0.06%) and gibberllin A3 (0.15%)di-limonene, as important components. These compounds can very important in durability and consumption its. Comparison of chromatograms showed that 1,2-benzenedicarboxylic acid was exists as a common components in heart wood and bark of mulberry tree.
Chemistry of wood
Ramin Vaysi
Abstract
The aim of this study was accomplished on identification and comparison of chemical compounds in wood of maple tree. For this purpose, the samples were chosen randomly from persuan maple and Caucasian maple tree in Nowshahr's forest region. Then, flour and ash were provided from heartwood, sapwood of ...
Read More
The aim of this study was accomplished on identification and comparison of chemical compounds in wood of maple tree. For this purpose, the samples were chosen randomly from persuan maple and Caucasian maple tree in Nowshahr's forest region. Then, flour and ash were provided from heartwood, sapwood of maple tree by TAPPI standards. For measured metallic ions, by atomic absorption method. The ions results showed that mn, co, fe, zn, and cu ions in Caucasian maple were more than persuan maple, but k ion was lower. Then extractives were separated from wood flour by acetone and extractives residue transferred to glass vial and was added BSTFA reactive agent to it. After samples prepared, samples were injected to the GC/MS device for it analysis. Identification of compounds was done by retention time of each compound, calculation of Quats index and Adams table. The result of GC-MS showed that there are 39 compounds in persuan maple, that benzaldehyde, bis (2-ethylhexyl)phthalate, gibberllin A3 and 1,2-benzenedicarboxylic acid were important components. 24 components identified in Acer leatum that di-limonene, bis(2-ethylhexyl)phthalate,alpha- terpen and alpha-pinene as important components. Comparison of chromatograms showed that di-limonene and bis(2-ethylhexyl)phthalate were exists as 2 common components in persuan maple and Caucasian maple tree. These compounds can very important in durability and consumption its.
Chemistry of wood
Ramin Vaysi; Farzad Yousefi
Abstract
The aim of this study was accomplished on identification and comparison of chemical compounds in wood of Alnus subcordata and Alnus subglotinosa. For this purpose, the samples were chosen randomly from Alnus subcordata and Alnus subglotinosa in Nowshahr's forest region. So that, first, flour and extractives ...
Read More
The aim of this study was accomplished on identification and comparison of chemical compounds in wood of Alnus subcordata and Alnus subglotinosa. For this purpose, the samples were chosen randomly from Alnus subcordata and Alnus subglotinosa in Nowshahr's forest region. So that, first, flour and extractives by acetone were provided by TAPPI standards methods. Then, extractives residue transferred to glass vial and was added BSTFA reactive agent to it. After prepared, samples were injected to the GC/MS device for it analysis. Identification of compounds was done by retention time of each compound, calculation of Quats index and Adams table. The result of GC-MS showed that there are 99 compounds in alnus subcordata, so that, dibutyl phthalate (9.15%), 2,2-oxybis-ethanol(6.62%), 1,2-benzendicarboxylic acid(2.63%) and squalene(0.48%) were important compounds. In alnus glutinosa, from 127 indentified compounds, butanedioic, monomethyl ester(10.88%), isopropenoxypropan-2-ol(8.82%),3,5-dioxaundecane(7.73%),gamma-sitosterol (3.53%) and vanillin(0.39%) were important compounds. Comparison of chromatograms mention samples showed that there are 12 common components in Alnus subcordata and Alnus subglotinosa, that tetradecane, hexadecane,heptadecane, isopropenoxypropan-2-ol and bis(2-ethylhexyl)phthalate were important components. Some of these compounds can very important in durability and consumption Alnus subcordata and Alnus subglotinosa.
Chemistry of wood
Ramin Vaysi
Abstract
The aim of study was accomplished on identification and comparison of chemical compounds in wood and bark of oak. For this purpose, the samples were chosen randomly from oak in Nowshahr forest region. Then, flour and ash were provided from heart wood, sap wood and bark of oak by TAPPI standards. For ...
Read More
The aim of study was accomplished on identification and comparison of chemical compounds in wood and bark of oak. For this purpose, the samples were chosen randomly from oak in Nowshahr forest region. Then, flour and ash were provided from heart wood, sap wood and bark of oak by TAPPI standards. For measured metallic ions, first the mineral compound of ash dissolved by 65% nitric acid and for it's identified by atomic adsorption method. The results showed that Fe, Zn and Cu ions in wood of oak were more than its bark and its Mn ion was lower. Then extractives were separated from wood flour by acetone and extractives residue transferred to glassy vial and was added BSTFA reactor to it. After samples prepared, its were injected by GC/MS for analyze. Identification of compounds was done by retention time of each compound, calculation of quartz index and Adams table. The result of GC-MS showed that there are 10, 42 and10 compounds in heart wood, sap wood and bark of oak, respectively. Comparison of chromatograms showed that Decan, Dodecan, Tetradecane and Bis(2-ethylhexyl)phthalate were exists as 4 common components in bark, sap wood and heart wood of oak and Silicic acid and 1,2-Benzenedicarboxylic acid were exists as 2 common components in bark and sap wood of oak. These compounds can very important in durability and consumption its.
Management and Economics wood
Saeed Hasani; Seid Khalil Hosseini Hashemi; Ramin Farsi; Ahmad Jahan Latibari
Abstract
AbstractAmong the forest diseases, fungi are the most important factors that cause irreparable losses to the wood in standing trees and logs. Fungi are the cause of contamination and decay of trees and timbers in forest or in the stock of factories. Decayed woods are one of the biomass resources and ...
Read More
AbstractAmong the forest diseases, fungi are the most important factors that cause irreparable losses to the wood in standing trees and logs. Fungi are the cause of contamination and decay of trees and timbers in forest or in the stock of factories. Decayed woods are one of the biomass resources and a great amount of decayed woods in the forests are not viable. In this study some experiments were conducted in order to investigate the effect of Coriolus versicolor decay on compounds obtained from beech wood (Fagus orientalis L.) pyrolysis and preparation of various and valuable chemicals. Separation and identification of chemical compounds in sound wood and decayed wood of beech was conducted by using pyrolysis method at 500° C and in nitrogen atmosphere. Separation and identification of extracted chemical compounds was carried out using sailylation of these compounds by N, O-bis (trimethylsilyl) trifluoroacetamide and also using Gas Chromatography and Mass Spectrometry method. Totally, 23 compounds were identified in sound beech wood which most of these compounds, in this temperature, are related to 2,6-dimethoxyphenol and 3-hidroxy-4-methoxy benzoic acid; and 31 compounds were detected in decayed beech wood that most of them are related to Cyclononasiloxane octadecamethy and 4-(3,4-Dimethoxybenzylidene)-1-(4-nitrophenyl) and also 17 compounds were detected the same in sound and decayed wood.