-Acda, M.N., Devera, E.E., Cabangon, R.J. and Ramos, H.J. 2012. Effects of plasma modification on adhesion properties of wood. International J. of Adhesion and Adhesives. 32: 70-75.
-Altgen, D., Bellmann, M., Wascher, R., Viöl, W. and Mai, C. 2015. Enhancing mechanical properties of particleboards using plasma treated wood particles. European J. of wood and wood products. 73: 2. 219-223.
-Avramidis, G., Klarhöfer, L., Maus-Friedrichs, W., Militz, H. and Viöl, W. 2012. Influence of air plasma treatment at atmospheric pressure on wood extractives. Polymer degradation and stability. 97: 3. 469-471.
-Aydin, I. and Demirkir, C. 2010. Activation of spruce wood surfaces by plasma treatment after long terms of natural surface inactivation. Plasma Chemistry and Plasma Processing. 30: 5. 697-706.
-Becker, K. H. and Belkind, A. 2003. Introduction to plasmas. Vac Technol Coat 5: 31-36.
-BS EN 927-6:2006 Paints and varnishes. Coating materials and coating systems for exterior wood. Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water.
-Carrillo, F., Colom, X., Sunol, J.J. and Saurina, J. 2004. Structural FTIR analysis and thermal characterisation of lyocell and viscose-type fibres. European Polymer J. 40: 9. 2229-2234.
-Clausen, C.A., Kartal, S.N., Arango, R.A. and Green, F., 2011. The role of particle size of particulate nano-zinc oxide wood preservatives on termite mortality and leach resistance. Nanoscale research letters. 6: 1. 427.
-de Cademartori, P.H.G., S. Junior, L.R., Blanchet, P., Magalhães, W.L. and de Muniz, G.I. B. 2018. The Use of Low-pressure Plasma on Enhancing the Attachment of Al2O3 Nanoparticles to Wood–Plastic Composites. J. of Wood Chemistry and Technology. 38: 2. 71-83.
-de Cademartori, P.H.G., Stafford, L., Blanchet, P., Magalhães, W.L.E. and de Muniz, G.I.B. 2017. Enhancing the water repellency of wood surfaces by atmospheric pressure cold plasma deposition of fluorocarbon film. RSC Advances. 7: 46. 29159-29169.
-Demirkir, C., Aydin, I., Colak, S. and Çolakoğlu, G. 2014. Effects of plasma treatment and sanding process on surface roughness of wood veneers. Turkish J. of Agriculture and Forestry. 38: 5. 663-667.
-Denes, A.R. and Young, R.A. 1999. Reduction of weathering degradation of wood through plasma-polymer coating. Holzforschung. 53: 6. 632–640.
-Feist, W.C. 1990. Outdoor wood weathering and protection. Outdoor wood weathering and protection. 225: 263-298.
-Freeman, M.H., Shupe, T.F., Vlosky, R.P. and Barnes, H.M. 2003. Past, present, and future of the wood preservation industry. Forest Products. J. 53: 10. 8–15.
-Gascón-Garrido, P., Mainusch, N., Militz, H., Viöl, W. and Mai, C. 2016. Effects of copper-plasma deposition on weathering properties of wood surfaces. Applied Surface Science. 366: 112-119.
-Gascón-Garrido, P., Thévenon, M.F., Mainusch, N., Militz, H., Viöl, W. and Mai, C. 2017. Siloxane-treated and copper-plasma-coated wood: Resistance to the blue stain fungus Aureobasidium pullulans and the termite Reticulitermes flavipes. International Biodeterioration and Biodegradation. 120: 84-90.
-Huang, X., Kocaefe, D., Kocaefe, Y., Boluk, Y. and Krause, C. 2013. Structural analysis of heat-treated birch (Betula papyrifera) surface during artificial weathering. Applied Surface Science. 264: 117-127.
-Kim, M.M., Kim, H.S. and Lim, J.Y. 2013. A study on the effect of plasma treatment for waste wood biocomposites. J. of Nanomaterials. 2013: 1-6.
-Lionetto F., Del Sole R., Cannoletta D., Vasapollo G. and Maffezzoli, A. 2012. Monitoring wood degradation during weathering by cellulose crystallinity. Materials. 5: 10. 1910-1922.
-Luna, M. L., Murace, M. A., Robledo, G. L. and Saparrat, M. C. 2012. Characterization of Schinopsis haenkeana wood decayed by Phellinus chaquensis (Basidiomycota, Hymenochaetales). IAWA J. 33:1.91-104.
-Mirshokraie S.A., Larie J., Mostaghni F. and Abdulkhani, A., 2014. Analysis of photodegraded lignin and lignin model compounds by ATR-FTIR spectroscopy. Iranian J. of Wood and Paper Science Research. 29: 3. 343-353.
-Moghaddam, M.S., Heydari, G., Tuominen, M., Fielden, M., Haapanen, J., Mäkelä, J.M., Wålinder, M.E., Claesson, P.M. and Swerin, A., 2016. Hydrophobisation of wood surfaces by combining liquid flame spray (LFS) and plasma treatment: dynamic wetting properties. Holzforschung. 70: 6. 527-537.
-Owen, N. L. and Thomas, D. W. 1989. Infrared studies of “hard” and “soft” woods. Applied spectroscopy, 43: 3. 451-455.
-Pabeliña, K. G., Lumban, C. O. and Ramos, H. J., 2012. Plasma impregnation of wood with fire retardants. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 272: 1. 365-369.
-Pandey, K. K. and Pitman, A. J. 2003. FTIR studies of the changes in wood chemistry following decay by brown-rot and white-rot fungi. International biodeterioration & biodegradation. 52: 3. 151-160.
-Poaty, B., Riedl, B., Blanchet, P., Blanchard, V. and Stafford, L. 2013. Improved water repellency of black spruce wood surfaces after treatment in carbon tetrafluoride plasmas. Wood science and technology. 47: 2. 411-422.
-Podgorski, L., Bousta, C., Schambourg, F., Maguin, J. and Chevet, B., 2002. Solid softwood coated with plasma-polymer for water repellence. Surface and Coatings Technology, 155: 1. 11-15.
-Rehn, P., Wolkenhauer, A., Bente, M., Förster, S. and Viöl, W. 2003. Wood surface modification in dielectric barrier discharges at atmospheric pressure. Surface and Coatings Technology. 174: 515-518.
-Reinprecht, L. 2016. Wood deterioration, protection and maintenance. John Wiley & Sons. 376.
-Roux M. L. and Podgorski L., 2000. The advantages of having in the future a European accelerated weathering test for wood finishes. Surface coatings international. 83: 8. 399-403.
-Sarmadi, M. and Denes, F. 1996. Surface modification of polymers under cold plasma conditions. Tappi J. 79: 8. 189-204.
-Schwanninger, M., Rodrigues, J. C., Pereira, H. and Hinterstoisser, B. 2004. Effects of short-time vibratory ball milling on the shape of FT-IR spectra of wood and cellulose. Vibrational Spectroscopy. 36: 1. 23-40.
-Tuong, V. M. and Li, J. 2010. Effect of heat treatment on the change in color. BioResources. 5: 2. 1257-1267.
-Uehara, T. and Sakata, I. 1990. Effect of corona discharge treatment on cellulose prepared from beech wood. J. of applied polymer science. 4: 7-8. 1695-1706.
-Vander Wielen, L. C., Östenson, M., Gatenholm, P. and Ragauskas, A. J. 2006. Surface modification of cellulosic fibers using dielectric-barrier discharge. Carbohydrate polymers. 65: 2. 179-184.
[36] Wolkenhauer, A., Avramidis, G., Hauswald, E., Militz, H. and Viöl, W. 2009. Sanding vs. plasma treatment of aged wood: A comparison with respect to surface energy. International J. of Adhesion and Adhesives, 29: 1. 1. 18-22.
-Wolkenhauer, A., Avramidis, G., Militz, H. and Viöl, W. 2008. Plasma treatment of heat treated beech wood–investigation on surface free energy. Holzforschung, 62: 4. 472-474.
-Xing, D., Wang, S. and Li, J. 2015. Effect of artificial weathering on the properties of industrial-scale thermally modified wood. BioResources. 10: 4. 8238-8252.
-Zhang, J., Kamdem, D. P. and Temiz, A. 2009. Weathering of copper–amine treated wood. Applied Surface Science. 256: 3. 842-846.
-Zille, A., Oliveira, F. R. and Souto, A. P. 2015. Plasma Treatment in Textile Industry. Plasma processes and Polymers. 2: 12. 98–131.
)